Commit Graph

40048 Commits

Author SHA1 Message Date
Beat Küng bc9dfe8599 holybro/kakutef7: disable module to reduce flash 2022-02-25 08:30:58 +01:00
Beat Küng ddad4c31c9 control_allocator: compute thrust scaling individually per axis
Before, adding the pusher to the same matrix as the upwards motors affected
the scaling for the upwards motors, resulting in values not equal to -1
anymore.
2022-02-25 08:30:58 +01:00
Beat Küng 76d8d8cae6 control_allocator: generic motor configuration for standard vtols
This adds the pusher/puller to the standard motors and makes the axis
configurable.
2022-02-25 08:30:58 +01:00
Beat Küng b2dc9ee710 control_allocator: add title & help url to geometry UI 2022-02-25 08:30:58 +01:00
Beat Küng cbcae260e4 mavlink: update submodule 2022-02-25 08:30:58 +01:00
Beat Küng e10ff59340 px4/fmu-v5/stackcheck: disable module to reduce flash 2022-02-25 08:30:58 +01:00
Beat Küng dce2968470 ROMFS: set CA_* + HIL_ACT_* params for hitl+sih airframes 2022-02-25 08:30:58 +01:00
Beat Küng 9b629a9e95 hitl,sitl,sih: use separate actuator_outputs_sim for SYS_CTRL_ALLOC==1
- removes the need to do type-specific rescaling of pwm to normalized values
- allows to run physical output drivers alongside HIL/SIH
2022-02-25 08:30:58 +01:00
Charles Cross 1e32398217 Adds scheduling call to ControlAllocator initialization 2022-02-25 08:16:08 +01:00
Charles Cross aecfbef128 Enables 20Hz backup scheduling for ControlAllocator 2022-02-25 08:16:08 +01:00
Charles Cross b0352135bb Restores Dshot trigger condition and adds dynamic mixing condition 2022-02-25 08:16:08 +01:00
Charles Cross 51c055832f Changes ControlAllocator to always publish actuator controls and status 2022-02-25 08:16:08 +01:00
Charles Cross 59f9a40584 Changes Dshot commands to always trigger from updateOutputs(), unless outputs are completely off 2022-02-25 08:16:08 +01:00
Charles Cross 46f8de3a17 Changes actuator_test syscmd value arg to be a float from -1 to 1 2022-02-25 08:16:08 +01:00
Daniel Agar 32a91377bf
Tools/process_sensor_caldata.py fix scipy import 2022-02-24 20:27:26 -05:00
Jukka Laitinen caaa13ddc0 uORB performance updates
Move some logic from Subscriber into uORBManager. This reduces calls from the
modules to the uORB manager, improving performance in protected build.

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2022-02-24 11:50:05 -05:00
Daniel Agar 611d50edf3
boards: holybro kakutef7 disable tone_alarm to save flash 2022-02-24 11:33:25 -05:00
Daniel Agar 8de2c80b34 mavlink: SCALED_IMU streams add temperature
- preference for accel or gyro temperature before mag
2022-02-23 14:05:31 -05:00
Daniel Agar 5b5d428189
boards: px4_fmu-v5_stackcheck disable fake_gps to save flash 2022-02-23 10:44:09 -05:00
Daniel Agar 01daf8d6d6
boards: omnibus_f4sd disable events module to save flash 2022-02-23 10:42:48 -05:00
Daniel Agar 11f617ca9b ekf2: default to in air and not at rest
- this is a more conservative default if a vehicle isn't set (no land detector running)
 - handled horizontal preflight failures in commander when disarmed
rather than overloading xy_valid and v_xy_valid flags
 - ekf2 no longer depend on arming or standby status
2022-02-22 16:59:10 -05:00
Daniel Agar d6d529539d ekf2: consolidate and simplify gnd effect logic 2022-02-22 16:59:10 -05:00
Daniel Agar 1d7791dad6 commander: monitor GPS validity and EKF2 dead reckoning
- ekf2: expose dead reckoning as control status flags
 - commander:
    - add GPS validity check
    - in AUTO MISSION if dependent on GPS then a loss of GPS will
2022-02-22 09:46:21 -05:00
Julian Oes 6021b8efb3 navigator: only apply breaking for multirotors 2022-02-22 09:41:22 -05:00
Julian Oes fa6c051ae5 navigator: break smoothly when entering hold mode
This uses the existing breaking functionality when hold/loiter mode is
activated.
2022-02-22 09:41:22 -05:00
Julian Oes f88dd28e85 navigator: extract breaking functionality out
This only moves the breaking functionality out from the reposition
command handling to a function, so that it can get re-used in other
places.
2022-02-22 09:41:22 -05:00
bresch 0e0e0d8be7 [AUTO COMMIT] update change indication 2022-02-22 11:49:25 +01:00
bresch 4f0a959244 gps_hgt: add and improve unit tests 2022-02-22 11:49:25 +01:00
bresch edabfd2f0e ekf_hgt: call specific height reset function instead of generic one
- Also use the delayed current data instead of newest that might not be
available (gps buffer is sometimes empty if the dt between samples is
larger than the delayed horizon).

- Separate "baro fault" from "baro intermittent": intermittent is a
  temporary failure and should prevent from switching to baro right now,
  but "fault" means that it should never be used anymore

- In case of height timeout, check for metrics but not for consistency
  as the filter is likely to have diverged already.
2022-02-22 11:49:25 +01:00
bresch cba73585e1 use recorded last sensor timestamp for intermittent check 2022-02-22 11:49:25 +01:00
Daniel Agar f431b233f3 ekf2: preflight checker fix flow y innovation filter 2022-02-22 09:39:22 +01:00
Daniel Agar 4f62b01dc7 Tools/px4moduledoc: add new rpm_sensor subcategory 2022-02-22 07:57:30 +01:00
Charles Cross f31f3370ef
Add support for Timer15 on H743 boards (#19228)
* Adds Timer15 to stm32_common, if the timer base is defined
* Adds Timer15 logic for DMA and AltFunc config on stm32h7 boards
* Adds TIM15 BDTR->MOE support in stm32_common timer init
* Adds support for TIM15 pwm channels on Matek H743 Slim
2022-02-21 16:52:38 -05:00
Daniel Agar 710185d2ad
drivers/magnetometer/rm3100: cleanup and simplify (#19238)
* switch to continuous mode at 75 Hz 
 * add simple failure count and reset mechanism
 * add range checks and perf counts
2022-02-21 16:48:20 -05:00
Roman Dvořák 976c994156
Extend the PCF8583 driver to support multiple instances (#19232)
* Add some restart events into pcf8583 driver

Co-authored-by: Vít Hanousek <vithanousek@seznam.cz>
2022-02-21 16:47:16 -05:00
Daniel Agar 3c58932aff
boards: px4_fmu-v2_default disable ms4525 to save flash 2022-02-21 16:45:22 -05:00
Charles Cross 699f34ba83
drivers/magnetometer/rm3100: self-test procedure revision (#19207)
* Adds retry behavior and additional checks to RM3100 BIST

Signed-off-by: Charles Cross <charles@missionrobotics.us>
2022-02-21 11:27:42 -05:00
Beat Küng 960003a86a control_allocator: fix weak authority matrix check & update
- use max(fabsf(val)) instead of max(val)
- use correct actuator count
2022-02-21 11:17:00 -05:00
Daniel Agar 591b7b6934 ekf2: add new estimator_gps_status.msg
- includes the estimator status check fail bits broken out as descriptive booleans
 - absorbs ekf_gps_drift.msg
2022-02-21 08:58:59 -05:00
Daniel Agar f8d7574d3c ekf2: simplify global position publication validity check 2022-02-21 08:57:33 -05:00
fury1895 be92165c54 AirspeedSelector: fix messaging 2022-02-21 15:21:13 +03:00
David Sidrane c0facec889 cdc_acm_check:Prevent USB disconect on param save
If the hardware support RESET lockout that has nArmed ANDed with VBUS
   vbus_sense may drop during a param save which uses
   BOARD_INDICATE_EXTERNAL_LOCKOUT_STATE to prevent external resets
   while writing the params.  If we are not armed and nARMRED is low
   we are in such a lock out so ignore changes on VBUS_SENSE during this
   time.
2022-02-21 10:56:41 +01:00
Julian Oes 9b35b680f6 gimbal: fix input selection
Once we have valid input we should use that and not overwrite our
update_result with the result from other inputs, otherwise the
automatic selection does not actually work.

This behavior means that only the first update will be used if there are
several sources updating in the same cycle.
2022-02-21 08:38:16 +01:00
Igor Mišić 3c09448daf dataman: add silence flag for _file_initialize 2022-02-21 08:36:36 +01:00
murata cc6c6c3b8c power_monitor: Determine I2C communication errors 2022-02-20 16:05:44 -05:00
Daniel Agar 09e36e6cb4 gimbal: new pitch limits [MNT_LND_P_MIN, MNT_LND_P_MAX] when landed 2022-02-20 16:04:09 -05:00
Justin 59f28517c5 Force ignition to use version 5 (edifice) which is what it is built for so it doesn't default to a newer version 2022-02-19 19:04:26 +01:00
Daniel Agar d147ad3a9a gimbal: add parameter units 2022-02-18 14:15:58 -05:00
Daniel Agar 2a8aa17a81 mavlink: streams MOUNT_ORIENTATION populate time_boot_ms 2022-02-18 14:14:56 -05:00
Daniel Agar 1f77a3750e mavlink: don't reset _src_addr_initialized on parameter updates 2022-02-18 14:14:36 -05:00