When running in HITL mode, pwm_out_sim publishes actuator_outputs.
px4io unconditionally publishes the uOrb actuator_outputs. When HITL
is configured, the px4io copy of the uOrb has all zeros.
The result is that there are two publications, one valid, and one
all-zeros. This causes the HIL_ACTUATOR_CONTROLS mavlink message
to be incorrect (all-zeros) and the SERVO_OUTPUTS_RAW mavlink
message to be inconsistent, as it takes the data from one or the
other uOrb randomly each cycle.
The fix is to let px4io know that HITL is in effect when it is
started, and modify px4io to suppress publication in this case.
This is a bigger more complicated fix than I would like, but I
think it is conceptually correct.
Signed-off-by: Nik Langrind <langrind@gmail.com>
-moved rc.mavlink to the boards optional rc additions (now it's called rc.board_mavlink) to handle board specific mavlink needs (mavlink over usb, ethernet, additional streams, etc.)
-mavlink module will be responsible to usb defaults, therefore less args are needed to be passed to mavlink module if one wants to use mavlink over usb.
-the way to check if connection is usb is by it's designated variable and not by config mode.
This change adds the line "param set RTL_TYPE 1" to the default init scripts for fixed wing. Similar to the other PR that sets default RTL_TYPE=1 for VTOLs, RTL_TYPE=1 should be default for normal fixed wings as well. Reference: https://github.com/PX4/Firmware/pull/12746/files
This new airspeed module does:
-runns an airspeed validator for every airspeed sensor present, which checks measurement validity and estimates an airspeed scale
-selects another airspeed sensor if for the current one a failure is detected
-estimates airspeed with groundspeed-windspeed if no valid airspeed sensor is present
-outputs airspeed_validated topic
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
It doesn't affect fixed wing flying anymore. I disabled it for the
deltaquad since I presume @sanderux prefers to have the feature disabled
even when flying in multicopter mode.
* Set/unset rcS vars at beginning and end of rcS script and reduce a few LOC checking SYS_AUTOCONFIG with improved logic.
* Restore current placement of set/unset vars in rcS script to leave only the SYS_AUTOCONFIG logic modification.
* Replace set AUTOCNF no after inadvertent deletion.
Nik Langrind
Silvan Fuhrer
JaeyoungLim
Jaeyoung-Lim
RomanBapst
Daniel Agar
Beat Küng
BazookaJoe1900
garfieldG
mcsauder
Matthias Grob
Hyon Lim
Claudio Micheli
Todd Colten
Timothy Scott
Julien Lecoeur