dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
33,360 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

89 Commits

Author SHA1 Message Date
David Sidrane 00b4807443 mro_x21: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane 4f5c88fc89 mro_x21-777: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane 1e55ce0839 mro_ctrl-zero-f7: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane aa1cb370e4 mro_x21 Updates for NuttX 9.1.0- 
mro_x21: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane c9a323ebcc mro_x21-777 Updates for NuttX 9.1.0- 
mro_x21-777: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane 2550d6f7c1 mro_ctrl-zero-f7 Updates for NuttX 9.1.0- 
mro_ctrl-zero-f7: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane e8e463b875 cubepilot_cubeyellow Updates for NuttX 9.1.0- 
cubepilot_cubeyellow: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
SalimTerryLi c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc 2020-09-07 23:09:20 -04:00
Daniel Agar 2c3441aa90 boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 
- reduced now that calibration uses uORB::Subscription
 - can likely be reduced further (perhaps < 8) with additional testing
 2020-08-21 10:12:13 -04:00
Daniel Agar fbc8e1b09e boards: mRo X2.1-777 fixes 
- ardupilot bootloader compatibility (first 3 sectors)
 - clock tree fixes
 - start mavlink
 - start mpu9250 magnetometer (only onboard mag)
 - fixes https://github.com/PX4/Firmware/issues/15466
 2020-08-09 14:24:49 -04:00
Daniel Agar e3d31a881e boards: NuttX disable posix message queues 2020-07-17 17:00:21 -04:00
Daniel Agar 13e34b32e6 new Bosch BMI088 IMU driver using FIFOs and DRDY 2020-06-11 12:25:13 -04:00
Daniel Agar 6f6efd60b7 boards: centralize optional external I2C sensor start 
- configured with new parameter SENS_EXT_I2C_PRB
 2020-06-10 09:04:13 -04:00
Daniel Agar 5e7d2e830d boards: delete old board.h boilerplate 2020-06-08 19:10:33 -04:00
Daniel Agar 5507c15bdc boards: move rgbled_pwm startup to appropriate boards 2020-06-08 16:49:46 -04:00
Daniel Agar d1c12ac7cf boards: mRo Control Zero fix IMU rotations 2020-06-04 11:34:31 -04:00
Daniel Agar 951969ba00
drivers/imu/invensense: new ICM20948 driver on SPI with AK09916 mag 2020-05-22 00:09:30 -04:00
Daniel Agar 746a8f5cf9 commander: reboot/shutdown usability fixes 
- always check with state machine before reboot/shutdown
 - respect BOARD_HAS_POWER_CONTROL (shutdown from command, low battery, power button)
 - px4_shutdown_request add optional delay and always execute from HPWORK
 - px4_shutdown_request split out px4_reboot_request
 2020-05-06 13:53:54 -04:00
Daniel Agar 28d2aca699 boards: include all procfs entries on boards that aren't flash constrained 2020-05-01 20:59:57 -04:00
Daniel Agar 8d0c92003a boards: remove all CONFIG_NXFONTS_DISABLE* 2020-05-01 20:59:57 -04:00
Daniel Agar 06478d9997 delete obsolete SENSORIOCSPOLLRATE/SENSORIOCRESET and systemcmds/config 2020-04-15 23:33:41 -04:00
mcsauder 6548fde024 Whitespace cleanup to quiet new blank line at EOF git hook. 2020-04-15 23:00:39 -04:00
Daniel Agar 1ac6230758 boards: always change default IMU_GYRO_RATEMAX on px4_fmu-v2/v3 and mro_x21 
- this can lower cpu usage considerably on older boards
 2020-04-15 21:52:02 -04:00
Daniel Agar 66eacd24bc
px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins 
- increase stack sizes to run cleanly under stackcheck
     - this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
 - remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
 2020-04-11 21:16:10 -04:00
Daniel Agar a89bba470a boards: STM32F76xxx/STM32F77xxx linker add ITCM RAM and .ramfuncs handling 
- this doesn't currently change anything, but gets us ready to start
experimenting with using the small amount of instruction tightly memory
on STM32F7
 - the .ramfuncs section works with NuttX CONFIG_ARCH_RAMFUNCS
 2020-04-08 13:20:54 -04:00
Daniel Agar 7aa7f0ed95 switch remaining boards to new InvenSense IMU drivers 2020-04-07 09:59:12 -04:00
Daniel Agar ad559a66a1 examples: add simple work_item example module 2020-04-06 09:43:55 -04:00
Daniel Agar 40b1043e12 NuttX boards minor lpwork and init stack increases 2020-04-02 23:39:17 -04:00
Daniel Agar 15332a7e56 boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15 2020-04-01 16:17:14 -04:00
Daniel Agar 7c8ab49eb9 boards: mro_ctrl-zero-f7 fix i2c 
- STM32_HSI_FREQUENCY 24 MHz -> 16 MHz (required for NuttX stm32f7 i2c)
 2020-04-01 14:27:33 -04:00
Daniel Agar ca81175b07 rename drivers/px4fmu -> drivers/pwm_out 
- split out header
 2020-03-31 19:12:31 -04:00
Daniel Agar 44bec269b0 boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15 2020-03-25 17:59:22 -04:00
Daniel Agar f5fe50f839 invensense/icm20608g driver minor improvements 
- interupt pin set active low and latch
 - relax retry timeout if configure failed
 - improve configured empty rate (sample rate) rounding
 - fix RegisterCheck
 - check FIFO count as part of full transfer and reset or adjust timing if necessary
 - rename DRV_IMU_DEVTYPE_ICM20608 -> DRV_IMU_DEVTYPE_ICM20608G
 2020-03-25 01:05:38 -04:00
Beat Küng b156fe5787 boards: remove deprecated SPI + I2C defines from board_config.h 
chip-selects are deselected in stm32_spiinitialize()
 2020-03-24 09:46:20 -04:00
Beat Küng c4a19c8852 refactor icm20689: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 54da4997ad refactor bmi088: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 7626be0485 refactor mpu9250: use driver base class 2020-03-24 09:46:20 -04:00
Daniel Agar 8738c26426
boards: enable NuttX SPI DMA buffers 
- update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers
 - remove explicit DMA buffer allocations from new IMU drivers
 - restore original BOARD_DMA_ALLOC_POOL_SIZE
 - decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing
 2020-03-22 19:24:26 -04:00
Beat Küng 8ebde51648 refactor hmc5883: use driver base class 
Removes the calibration on startup, as these values were overwritten by
the system calibration values anyway.
So the only difference is that if all calibration scales were equal to 1,
the driver startup would have failed.
 2020-03-17 23:31:17 -04:00
Beat Küng 969a77f889 refactor mpu6000: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng be0a205438 refactor ist8310: use driver base class 2020-03-17 23:31:17 -04:00
Daniel Agar 0ce9e113ff boards: stm32f4/f7 enable SPI_DMATHRESHOLD=32 2020-03-11 22:08:37 -04:00
Beat Küng 179c89b6bd board configs: extend board_dma_map.h with a table 2020-03-11 22:08:37 -04:00
Daniel Agar 8c2ba5f39f mro_x21-777: add board_dma_map.h and enable SPI1 DMA 2020-03-11 22:08:37 -04:00
Daniel Agar 38a10fc7fc mro_x21: add board_dma_map.h and enable SPI1 DMA 2020-03-11 22:08:37 -04:00
Daniel Agar f309e3a5ba mro_ctrl-zero-f7: add board_dma_map.h and enable SPI1/SPI5 DMA 2020-03-11 22:08:37 -04:00
Daniel Agar f9794e99f8
move hover_thrust_estimator to new module (mc_hover_thrust_estimator) 
* MC_HTE: unitialize with hover_thrust parameter
* MC_HTE: constrain hover thrust setter between 0.1 and 0.9
* MC_HTE: integrate with land detector and velocity controller
* MCHoverThrustEstimator: Always publish an estimate even when not fusing measurements. This is required as the land detector and the position controller need to receive a hover thrust value.

* MC_HTE: use altitude agl threshold to start the estimator
local_position.z is relative to the origin of the EKF while dist_bottom
is above ground

Co-authored-by: bresch <brescianimathieu@gmail.com>
 2020-03-11 21:20:54 -04:00
Daniel Agar 46a09b711f boards: increase STDIO buffer size where we can afford it 2020-03-11 17:19:44 -04:00
Daniel Agar 505afc6063 boards: increase LPWORKSTACKSIZE 1536 -> 1600 2020-03-10 12:53:01 -04:00
Beat Küng 335623e11d SPI config: use enum to specify bus 2020-03-10 10:11:43 -04:00