Commit Graph

43587 Commits

Author SHA1 Message Date
David Sidrane d33bb59225 NuttX with multi-PHY backports 2024-01-16 17:09:26 -05:00
Alexis Guijarro 63b3a68aa3
github actions compile nuttx add mro_ctrl-zero-classic 2024-01-16 15:00:19 -05:00
Daniel Agar c3ae7b28c0
matrix: adjust printing for if symmetric (lower triangular only) 2024-01-16 10:20:21 -05:00
Daniel Agar 64f28c4c07 ekf2: delete unused gps error norm field 2024-01-12 10:14:32 -05:00
Silvan Fuhrer a38abdbf9d
TECS throttle gains default reduction and transition values from previous PX4 version (#22548)
* TECS: reduce default of FW_T_I_GAIN_THR

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>

* TECS: reduce default of FW_T_THR_DAMP

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>

* TECS: improve param descriptions and meta data of some params

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>

* FW Pos C: rename FW_T_THR_DAMP to FW_T_THR_DAMPING

Rename wihtout param translation as the interpretation of this param has changed
recently (a bug was fixed that caused the damping to have a much lower effect than
it should). We want to avoid that users keep the previously tuned value (with the bug)
and do not update the tuning when using the fixed version (v1.14.0 and later).

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>

* FW Pos C: rename FW_T_I_GAIN_THR to FW_T_THR_INTEG

Rename wihtout param translation as the interpretation of this param has changed
recently (a bug was fixed that caused the damping to have a much lower effect than
it should). We want to avoid that users keep the previously tuned value (with the bug)
and do not update the tuning when using the fixed version (v1.14.0 and later).

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>

---------

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-01-12 10:25:53 +01:00
Silvan Fuhrer 12997020a4
MissionFeasibilityChecker: remove below home check (#22624)
This check gave a warning when one or more mission items were below the
Home altitude. As it is a valid usecase to plan missions below Home,
those warnings were too often seen as a inconvenience and are thus
removed here.

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-01-12 09:53:14 +01:00
Silvan Fuhrer 3b54a06567 Tailsitter: use same pitch transition thresholds in all modes
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-01-12 09:51:55 +01:00
Silvan Fuhrer 3e36ab187b ROMFS: improve SITL tailsitter tuning
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-01-12 09:51:55 +01:00
Silvan Fuhrer a47bc4cb90 Tailsitter: mini clean up
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-01-12 09:51:55 +01:00
Silvan Fuhrer e260a92ccb MC att control: do not update the attitude setpoint directly in transition mode
That enables us to update the pitch setpoint in Stabilized mode
in the VTOL controller (pitch ramp for transition).

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-01-12 09:51:55 +01:00
Daniel Agar 8a031677d5
ekf2: verbose debug print status include state variances 2024-01-11 11:53:20 -05:00
Daniel Agar 4cb293020a
ekf2: remove sensor sample uORB::Subscription missed perf counters
- these served their purpose, but are no longer useful
 - still worth keeping the IMU subscription missed perf count to catch any scheduling issues
2024-01-11 11:52:29 -05:00
Daniel Agar 855bf8f0d2 .gitmodules set gz submodule branch 2024-01-11 11:07:33 -05:00
Sihyun 4377e5e319 boards/thepeach: Add uxrce_dds_client 2024-01-11 11:00:29 -05:00
Daniel Agar 8bcba6128a ekf2: fix resetGlobalPosToExternalObservation whitespace 2024-01-11 10:59:56 -05:00
Anthony Merlino 5c845a58f1 netman: Allow default fallback IP to be set by board config 2024-01-11 10:58:59 -05:00
Silvan Fuhrer e1ad1b60d0
VTOL: change transition airspeed threshold: only look at VT_ARSP_TRANS (#22581)
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-01-11 13:35:01 +01:00
Roman Bapst 603c3f6636
added support to reset vehicle position based on external position (#22444)
via command MAV_CMD_EXTERNAL_POSITION_ESTIMATE

Signed-off-by: RomanBapst <bapstroman@gmail.com>
2024-01-11 13:09:22 +01:00
Daniel Agar d45c3d3407
ekf2: verbose (DEBUG_BUILD) print status with Matrix improved print
* ekf2: verbose print status
 * matrix/Matrix improve print output
 * bold diagonal elements, print ring buffer entry size
 * print in scientific notation when >= 10 to respect max size

---------

Co-authored-by: bresch <brescianimathieu@gmail.com>
2024-01-10 09:46:04 -05:00
dirksavage88 071565a8ad Fix scaling issue with thoneflow/holybro optical flow pwm3901 UART driver
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
2024-01-09 22:08:09 +01:00
alexklimaj af0eb729c9 boards: arkv6x disable serial tx dma for now to prevent blocked tx 2024-01-09 10:38:01 -05:00
Jaeyoung Lim c8e041a371
Add Fixedwing path following as a separate controller state (#21376)
* Separate offboard path setpoints as fixedwing pos control state

This commit separates offboard path following as a separate state inside the FW Poscontrol module.

This is a cleanup on clearly defining fw pos control behaviors

* Update src/modules/fw_pos_control/FixedwingPositionControl.cpp

Co-authored-by: Silvan Fuhrer <silvan@auterion.com>

* Fix format

---------

Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
2024-01-09 16:35:50 +01:00
Julian Oes 88b3316409
sensors/vehicle_imu: fix gyro clipping publication
The IMU topic is not zeroed, and the clipping information was not
copied, so this field ended up being garbage.

Signed-off-by: Julian Oes <julian@oes.ch>
2024-01-09 10:20:40 -05:00
Matthias Grob 9156c5c065 ROMFS: remove single trailing zeros 2024-01-09 10:27:39 +01:00
Matthias Grob b70b19b7eb ROMFS: keep consistent quad X geometry but in each airframe separately 2024-01-09 10:27:39 +01:00
Matthias Grob 09fa712d37 ROMFS: remove trailing zeroes 2024-01-09 10:27:39 +01:00
Matthias Grob 40f2fc4e77 ROMFS: remove duplicate uuv configuration 2024-01-09 10:27:39 +01:00
Matthias Grob 4b86e174a3 ROMFS: Fix quad + geometry 2024-01-09 10:27:39 +01:00
Federico Ciresola 20129e63fa
ModeCompleted.msg: document nav_state (#22544) 2024-01-08 11:32:41 +01:00
somebody-once-told-me 3d5c2ef6c4
[control_allocation] small function comment typo fix (#22607)
Co-authored-by: Master Chief <master-chief@the-void.com>
2024-01-08 11:12:06 +01:00
Peter van der Perk cf840ff373 Update NuttX 2024-01-06 04:41:00 -05:00
Peter van der Perk 0df7ee423f fmu-v6xrt: Tune ITCM function mapping 2024-01-06 04:41:00 -05:00
muramura b24d9bf009 fmu-v6xrt: Move external BMP388 outside of config parameter determination 2024-01-05 09:10:54 -05:00
Peter van der Perk e79f6b2ac1 v6x-rt: Add reboot to isp support 2024-01-05 08:41:41 -05:00
David Sidrane 5d7cb99204 px4_fmu-v6xrt:Support PX4 VxX Mini baseboard 2024-01-05 01:38:22 -05:00
muramura 959cb41e3a mavlink: Add a second barometric sensor message 2024-01-04 11:19:41 -05:00
Daniel Agar 6495f40ee4 delete old top level config files (dot files, CI, etc) 2024-01-04 11:18:56 -05:00
muramura 7b32b735e8 fmu-v6xrt: Delete a parameter setting that does not exist 2024-01-04 11:18:18 -05:00
Peter van der Perk 84093a07a2 reboot: Add reboot to ISP option 2024-01-04 11:17:16 -05:00
Peter van der Perk 8ba18a78af v6x-rt: move romapi to platform 2024-01-04 05:12:34 -05:00
Silvan Fuhrer 6be8cbe439
Navigator: mission_block: reduce enforce eexit course margin to 105% (#22511)
With this margin it is made sure that if the loiter is not perfectly tracked,
(vehicle outside of path setpoint) a wp just at the border of the loiter
is still reachable.
It should though be as small as necessary, as otherwise, with good
loiter tracking,  waypoints that are close but not right on the loiter
radius are not enforcing the exit course neither.

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2023-12-21 16:58:22 +01:00
Silvan Fuhrer 7e22b47b85
Navigator/FlightTaskAuto yaw handling improvements/simplifications (#22532)
* PositionSetpoint: remove yaw_valid field

* Navigator: set yaw setpoint to NAN for Takeoff

Don't set a yaw setpoint for takeoff, as Navigator doesn't handle the yaw reset.
The yaw setpoint generation is handled by FlightTaskAuto.

* PositionSetpoint.msg: remove disable_weather_vane and instead only use the yaw field

Strictly follow the concept that if the position_setpoint.yaw is set, then
follow it the controller, and otherwise let the controller set it as it
thinks it's best.

* Navigator: remove logic that sets yaw to be accepted in TAKEOFF

No longer needed as during Takeoff we anyway don't set a yaw setpoint.

* PositionSetpoint.msg: remove yawspeed_valid

* PositionSetpoint.msg: remove yawspeed

* Navigator: set yaw setpoint to NAN instead of current

In set_takeoff and set_land_item, as well as for VTOL transition.
The flight tasks then set the yaw corresponding to the current yaw.

* Navigator: change get_yaw_acceptance into a bool

* PositionSetpoint.msg: improve comment for yaw

* MissionBlock: remove unnecessary code from set_vtol_transition_item

* Navigator: clean up calculate_breaking_stop(), set yaw to NAN

* Navigator: set yaw to NAN in variouls places where not specifc setpoint is desired

* Navigator: set yaw to NAN in reset_position_setpoint()

---------

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
Co-authored-by: Matthias Grob <maetugr@gmail.com>
2023-12-21 16:50:13 +01:00
Matthias Grob d872ef87da differential_drive_control: don't build by default
also add dependency on control allocation parameter CA_R_REV
2023-12-21 16:27:53 +01:00
Matthias Grob 3de5c609a4 Differential Rover: PR fixes 2023-12-21 16:27:53 +01:00
PerFrivik 056e41af8c Differential Rover: Ported R1 to GZ and introduced new GZ wheel interface 2023-12-21 16:27:53 +01:00
PerFrivik 1e7ce32480 Differential Rover: Added logging and dds topics 2023-12-21 16:27:53 +01:00
PerFrivik 3df71d1837 Differential Rover: Differential drive module & library 2023-12-21 16:27:53 +01:00
PerFrivik e3359ea884 Differential Rover: Update airframe architecture 2023-12-21 16:27:53 +01:00
Peter van der Perk 19d1941758 px4_fmuv6xrt: Switch to icm42686p on SPI1
icm42588p driver don't use a icm42688p when icm42686p is requested
2023-12-21 10:11:20 -05:00
bresch c1b139dea1 atune: reset param on start
This prevents a race condition where autotune cannot start because the param was already set to 1
2023-12-21 13:52:47 +01:00