Daniel Agar
d2f1349d1a
sensors/vehicle_imu: replace coning metric with actual integrator coning correction (averaged)
...
- this saves a relatively expensive higih rate cross product and gives
better visibility into what's actually happening internally
2022-04-13 10:36:45 -04:00
bresch
d903613c9c
ekf: add logging for rng kinematic consistency check
2022-04-13 11:41:48 +02:00
bresch
8693ad15a7
ekf: add logging of range finder consistency check
2022-04-13 11:41:48 +02:00
Matthias Grob
6ce3e88f9d
vehicle_command: specify what SPEED_TYPEs are for
2022-04-13 12:23:27 +03:00
RomanBapst
b335710655
vehicle_command: added enum for speed types
...
Signed-off-by: RomanBapst <bapstroman@gmail.com>
2022-04-13 12:23:27 +03:00
Junwoo Hwang
35613df210
uORB : Don't automatically include message name as default topic name in uORBTopics source files, to handle case where user doesn't use default messgae name for multi topic definition in .msg file
2022-04-13 09:08:51 +02:00
Daniel Agar
bb2ea574aa
ekf2: properly reset IMU biases on calibration change (non-multi-EKF)
...
- this was working in the multi-EKF case using vehicle_imu, but missing
in sensor_combined
2022-04-11 12:23:55 -04:00
Igor Misic
80aef942cd
safety and safety button: refactoring #19413
2022-04-05 07:57:37 +02:00
Hovergames
457130fb69
Support for NXP UWB position sensor
...
uwb_sr150 driver for the sensor, and some
modifications in precision landing to allow
landing on a platform using the UWB system.
2022-04-04 17:26:52 +02:00
Daniel Agar
84e796c385
drives/gps: add new sensor_gnsss_relative msg
...
- for ublox this corresponds to NAV_RELPOSNED
2022-03-29 07:59:41 +02:00
Daniel Agar
0c31f63896
sensors: add baro calibration and cleanup
...
- sensor_baro.msg use SI (pressure in Pascals)
- update all barometer drivers to publish directly and remove PX4Barometer helper
- introduce baro cal (offset) mainly as a mechanism to adjust
relative priority
- commander: add simple baro cal that sets baro offsets to align with
GPS altitude (if available)
- create new sensors_status.msg to generalize sensor reporting
2022-03-26 16:08:41 -04:00
Silvan Fuhrer
a7ddaf08c4
vehicle_status_flags.msg: remove condition_ prefix to reduce message size
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2022-03-23 10:37:51 -04:00
Silvan Fuhrer
c30f2b9493
vehicle_status_flags.msg: remove unused condition_system_returned_to_home
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2022-03-23 10:37:51 -04:00
Daniel Mesham
06a9be74fa
microdds: add xrce client
2022-03-22 09:01:05 +01:00
JunwooHWANG
04f8453f4a
Reduce Beeepr Default volume : 40 -> 20, since it's too loud for TAP_ESC devices from Yuneec ( #19311 )
2022-03-11 10:27:57 +01:00
Beat Küng
9b629a9e95
hitl,sitl,sih: use separate actuator_outputs_sim for SYS_CTRL_ALLOC==1
...
- removes the need to do type-specific rescaling of pwm to normalized values
- allows to run physical output drivers alongside HIL/SIH
2022-02-25 08:30:58 +01:00
Daniel Agar
1d7791dad6
commander: monitor GPS validity and EKF2 dead reckoning
...
- ekf2: expose dead reckoning as control status flags
- commander:
- add GPS validity check
- in AUTO MISSION if dependent on GPS then a loss of GPS will
2022-02-22 09:46:21 -05:00
Daniel Agar
591b7b6934
ekf2: add new estimator_gps_status.msg
...
- includes the estimator status check fail bits broken out as descriptive booleans
- absorbs ekf_gps_drift.msg
2022-02-21 08:58:59 -05:00
Daniel Agar
e0a8d217fc
mavlink increase HEARTBEAT timeout 1.5->2.5s
...
- tolerate missing one HEARTBEAT + jitter
2022-02-18 10:16:20 -05:00
Roman Bapst
6de5d24e00
Added VTOL Takeoff navigation mode ( #19027 )
...
* Commander: added support for MAIN_STATE_AUTO_VTOL_TAKEOFF
* navigator: added support for vtol_takeoff navigation mode
2022-02-15 14:56:57 +01:00
bresch
5818974f0f
ekf: add range finder "faulty" status
...
When delclared faulty, the range finder cannot be used anymore
2022-02-11 10:57:45 -05:00
Julian Oes
39f0e97245
vmount: refactor for v2 auto input, test command
...
This is a bigger refactor of vmount to clean it up and plug some holes
in functionality.
The changes include:
- Fixing/simplifying the test command.
- Changing the dependencies of the input and output classes to just the
parameter list.
- Adding a separate topic to publish gimbal v1 commands to avoid
polluting the vehicle_command topic.
- Removing outdated comments and author lists.
- Extracting the gimbal v2 "in control" notion outside into control_data
rather than only the v2 input.
2022-02-07 19:21:15 -05:00
Julian Oes
f2216dff55
mavlink: don't send gimbal_device_attitude_status
...
If we receive gimbal_device_attitude_status by mavlink we should not
re-send it as we are already supposed to be forwarding mavlink traffic
from the gimbal to the ground station.
2022-02-07 19:21:15 -05:00
Daniel Agar
f3e2a197ad
move vehicle at rest detection ekf2 -> land_detector
...
- move vehicle at reset detection ekf2 -> land_detector
- ekf_unit: reduce init period
- Fake fusion is when at rest is quite strong and makes the variance reduce rapidly. Reduce the amount of time we wait before checking if the variances are still large enough.
- ekf_unit: reduce minimum vel/pos variance required after init
- Fake pos fusion has a low observation noise, making the vel/pos variances reduce quickly.
Co-authored-by:: bresch <brescianimathieu@gmail.com>
2022-02-01 17:50:19 -05:00
mcsauder
e554f0174d
Format whitespace and group checkall() methods together in geofence class.
2022-01-31 21:01:03 -05:00
Daniel Agar
90358f078f
add odometry reset counter (ekf2, mavlink, etc)
2022-01-31 09:19:36 -05:00
CUAVmengxiao
425d03d909
msg: Add full_charge_capacity_wh
2022-01-26 13:44:48 -05:00
Roman Dvořák
c8349811d1
Enable logging of mavlink tunnel messages
...
Co-authored-by: Vit Hanousek <vithanousek@seznam.cz>
2022-01-26 11:10:43 -05:00
Thomas Stastny
3b6c9448aa
npfg: fix format CMakeLists
2022-01-14 22:05:53 +01:00
Thomas Stastny
082e320191
integrate optional NPFG library for wind-aware fixed-wing guidance
2022-01-14 22:05:53 +01:00
Claudio Micheli
8a01135a93
Commander: more changes to use events with escs and battery failures
...
Signed-off-by: Claudio Micheli <claudio@auterion.com>
2022-01-13 08:40:34 +01:00
Claudio Micheli
d122513197
extend support for Battery status message
...
Signed-off-by: Claudio Micheli <claudio@auterion.com>
2022-01-13 08:40:34 +01:00
Julian Oes
9fe7a40673
manual_control: enable sending camera commands
2022-01-10 23:04:10 -05:00
Julian Oes
860b23dd17
tunes: add tune to power off
...
This is used by the ATL Mantis EDU to help the user realize when the
drone is powered off.
2022-01-10 23:04:10 -05:00
Daniel Agar
e731fcdbc0
sensors (accel/gyro/mag) determine if external with device id
2022-01-10 10:31:07 -05:00
Matthias Grob
bbb04ab4b8
Remove relaying of maximum altitude through land detector
2022-01-05 14:54:59 +01:00
honglang
b60e59d9be
msg: new sensor_hygrometer msg
2021-12-27 12:13:09 -05:00
Beat Küng
4c80adfaf1
control_allocator: implement trim + slew rate limits configuration
2021-12-24 20:06:13 -05:00
Beat Küng
1901edf13c
actuator_motors.msg: add reversible flags & implement in mixer_module
2021-12-24 20:06:13 -05:00
Matthias Grob
f68ae39840
Commander: avoid RC actions during calibration
2021-12-22 09:08:23 -05:00
marcojob
2cfe08b3b1
small typo in vehicle_local_position msg
2021-12-17 15:45:07 +01:00
Michael Schaeuble
5ad8b84dec
Fix PPS based UTC timestamp in camera trigger and capture messages
...
The existing implementation has about 100ms difference to a reference clock. With the changes this error less than 25us.
- Use sensor_gps messages with hrt timestamps as RTC reference and not the system realtime clock. The PPS interrupt can then be aligned with the GPS clock system.
- Keep fallback based on system RTC when no PPS pulse was captured
2021-12-17 07:56:08 +01:00
Michael Schaeuble
ebb657bcf4
Fix camera trigger via MAVLink when camera capture feedback is enabled
...
- camera_trigger module always publishes the camera_trigger msg (independent of the camera feedback)
- Use camera_trigger msg and set the feedback flag
- Subscribing modules determine if the message is relevant based on the feedback message
2021-12-17 07:56:08 +01:00
Igor Mišić
72b1db4a63
pps_capture: implementation of pulse per second capture driver
2021-12-17 07:56:08 +01:00
Thomas Debrunner
eb69f15d3a
health-flags: Increase health flags to 64 bit bit field to support extended sys status mavlink message
...
Add SYS_STATUS flag for parachute
2021-12-14 09:41:12 -05:00
Beat Küng
f76086ffa1
microRTPS_agent_CMakeLists.txt.em: add install section
2021-12-10 09:03:08 -05:00
Matthias Grob
ddc6b6bc9c
battery: move MAVLink specific handling out of battery class
2021-12-07 21:06:51 +01:00
Daniel Agar
8fbf79527f
magnetometer allow setting initial calibration from bias if available and stable
2021-12-01 20:24:56 -05:00
alexklimaj
bfd5a90a5d
UAVCAN Moving Baseline Working
...
Set uavcan publisher priorities
Switch to ardupilot rtcm message and add heading accuracy
2021-11-30 15:59:08 -05:00
Matthias Grob
c522a8b15a
Compute RTL time and react if lower than flight time
...
- Compute RTL time also during RTL
- Calculate correct altitude when finding destination
2021-11-24 14:10:24 +01:00