82fd2987c9
fw pos control: revert name until we delineate this module a bit more ( #21442 )
2023-04-13 17:00:04 +02:00
a2ce73d39d
px4/fmu-v6x: increase BL baudrate for flashing via uart to 1500000
2023-04-13 07:46:49 +02:00
0cfe135028
cubeorangeplus: enable bl_update
...
This way the bootloader can be updated.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-04-10 15:19:25 +12:00
728367a1dc
cubeorange: enable bl_update
...
This way the bootloader can be updated.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-04-10 15:19:25 +12:00
cbc067f235
boards: include INS drivers by default on PX4 FMU (eg VectorNav VN-100, VN-200, VN-300)
2023-04-06 14:06:57 -04:00
19752a7670
fmu-v2/v3: fix HW detection on CubeBlack
...
This fixes the case where the hardware detection fails on CubeBlack when
a CAN device is connected to CAN1 and talking, and therefore preventing
the check from getting a clear result.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-04-01 10:34:24 -07:00
50f8c30f10
fmu-v2/v3: refactor detection function
...
This consolidates the version/revision detection function.
This should allow for actual changes in a follow up commit.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-04-01 10:34:24 -07:00
8306fb96ea
boards: update all NuttX defconfigs
2023-03-24 10:03:14 -04:00
efab9be488
update all px4board kconfig
2023-03-24 10:01:58 -04:00
64e90b91aa
px4_fmu-v6c:Add Mini & fix Rev 1 ( #21226 )
2023-03-21 09:16:35 -07:00
4363b09421
ekf2: add kconfig option to enable/disable external vision fusion
2023-03-20 10:12:17 -04:00
d47f96f1a5
ekf2: add kconfig option to enable/disable AUX velocity fusion
2023-03-20 10:12:17 -04:00
4270a303ab
ekf2: add kconfig option to enable/disable airspeed and sideslip fusion
2023-03-20 10:12:17 -04:00
98ff1afc19
ekf2: add kconfig option to enable/disable GNSS yaw
2023-03-20 10:12:17 -04:00
8b2205810b
ekf2: add kconfig option to enable/disable baro compensation
2023-03-20 10:12:17 -04:00
fe0e3acf09
ekf2: add kconfig option to enable/disable drag fusion
2023-03-20 10:12:17 -04:00
0ae296bfe2
ARK CANnode fix params
2023-03-16 14:32:36 -04:00
6ec2b902cc
ROMFS: only copy bootloader binary if systemcmds/bl_update included
2023-03-16 09:43:56 -04:00
ea97a38b2b
Initial Cannode PWM Support ( #19748 )
...
* Add uavcannode esc/servo pwm control pipeline
* Remove cannode rc.interface with mixer purge
* Cannode add Kconfig options to reduce flash usage
2023-03-15 11:20:07 -04:00
f0a95f9572
ekf2: add new kconfig option for multi-EKF
...
- disabled if flash constrained or memory constrained
2023-03-15 09:32:47 -04:00
2605562a69
cubeorangeplus: add I2C4, start AK09918
...
CubeOrange+ which have the ICM45686, also have the AK09918 connected
on the internal I2C4.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-03-14 08:34:28 -04:00
7be3279675
cubeorangeplus: add check for SMPS support
...
If NuttX is built without support for SMPS it can brick the hardware.
Therefore, I suggest that we add this additional compile-time check.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-03-13 22:54:41 -04:00
36f430e385
cubeorangeplus: save some flash space
...
We need to make space for drivers.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-03-13 22:53:56 -04:00
bee4fe9470
boards: sensor config for CubeOrange+
...
Signed-off-by: Julian Oes <julian@oes.ch>
2023-03-13 22:53:56 -04:00
ea20217c1b
kakuteh7v2/mini: EKF2 is already the default
2023-03-08 10:48:31 -05:00
593b3d250d
kakuteh7mini: remove duplicate param defaults
...
Signed-off-by: Julian Oes <julian@oes.ch>
2023-03-08 10:48:31 -05:00
ed49ed3903
kakuteh7v2/mini: use EKF2 without mag by default
...
This switches from attitude_estimator_q to EKF2 which should now work
without mag when the params are set to SYS_HAS_MAG = 0 and
EKF2_IMU_CTRL = 7 to enable gravity fusion.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-03-08 10:48:31 -05:00
daa302cdbe
Changes to allow the commander module to be built and run on Qurt ( #21186 )
...
* Changed exclusion to rely on the definition of PX4_STORAGEDIR
2023-03-06 09:49:07 -05:00
7edce94b93
v2_default: disable hover thrust estimator to safe flash
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2023-03-02 12:22:18 -05:00
bdb0fe77d0
v6x: fix mag orientation for V6X009010 and V6X010010 ( #21194 )
2023-02-28 11:01:16 +01:00
a1efafc42b
drivers/cyphal: incremental fixes for fmu-v5 ( #20671 )
...
* Cyphal: fix comparing floating-point issue
* Cyphal: fix setpoint serialization
* Cyphal: fix bug with wrong comparasion of param name and pub/sub name: remove prefix from UavcanPublisher::updateParam and UavcanDynamicPortSubscriber::updateParam and PublicationManager::updateDynamicPublications
* Cyphal: integrate UavcanEscController with PublicationManager, remove second instance of UavcanEscController from CyphalNode
* Cyphal: publish readiness with minimal frequency because according to UDRAL The drive shall enter STANDBY state automatically if the readiness subject is not updated for CONTROL_TIMEOUT
* Cyphal: increase setpoint publish rate from ~75 to 200 by removing PX4_INFO (it really significantly react on the the output rate) and changing the mixing output rate and the shedule interval
* Cyphal: restore prefix because we need it for uorb over uavcan/cyphal and add udral prefix for non uorb pub/sub
* Cyphal: fix DynamicPortSubscriber subscription: if it has multiple subscribers, it should call subscription only after updating of all port subscribers port identifiers
* Cyphal: fix SubscriptionManager: we should take care about prefix
* Cyphal: fix readiness for test motor mode
* [Cyphal] Fix dynamicsubscription, improve printinfo, enable MR-CANHUBK3 config
---------
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
2023-02-23 10:57:50 -05:00
3bdb42b6a7
mro/pixracerpro: add missing px4_platform_configure() call ( #21158 )
2023-02-21 09:30:39 +01:00
b3eb563db4
boards: cubepilot_cubeorange_test restore sd_bench (used on test rack)
2023-02-13 23:53:54 -05:00
5803f692b9
boards: update CubePilot+ test defconfig
...
This is tracking upstream changes and making it build.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-02-13 22:36:22 -05:00
01a9563955
cubeorangeplus: remove some modules to save flash
...
Signed-off-by: Julian Oes <julian@oes.ch>
2023-02-13 22:36:22 -05:00
9d8fa38793
cubeorange: remove some modules to save flash
...
Signed-off-by: Julian Oes <julian@oes.ch>
2023-02-13 22:36:22 -05:00
e5a957ae63
boards: arkv6x add pulldowns to GPIO pins UART7 RTS and UART7 CTS
2023-02-13 22:35:23 -05:00
d69d99b191
kakuteh7v2/mini: switch on VTX+
...
This just always switches the VTX+ power on.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-02-13 22:00:49 -05:00
1134d5338f
boards: sky-drones_smartap-airlink_default disable modules to save flash
2023-02-13 20:58:17 -05:00
4d95150e18
boards: px4_fmu-v4pro_test disable gyro_fft to save flash
2023-02-13 20:56:19 -05:00
299cb32aa8
boards: nxp_fmuk66-v3_test disable gyro_fft to save flash
2023-02-13 20:55:06 -05:00
bc5f4f8377
boards: mro ctrl-zero-h7 and pixracer disable modules to save flash
2023-02-13 20:53:52 -05:00
70a7edbcd0
boards: cubepilot_cubeorange_default disable SIH simulator to save flash
2023-02-13 20:47:26 -05:00
b14e0c21b6
boards: px4_fmu-v2_default disable sensors/vehicle_airspeed and sensors/vehicle_optical_flow to save flash
2023-02-13 20:45:28 -05:00
3e200bca0d
fw_pos_control_l1: renaming to fw_path_navigation, l1 control is not used anymore, use a more generic naming.
2023-02-09 17:51:55 +01:00
a4aa76f0ac
VOXL2 board updates and new Kconfig option for ROOTFSDIR
...
- also includes a couple of miscellaneous changes to VOXL2 support to show Qurt messages on px4 console and put logs in the proper spot
2023-01-30 12:03:40 -05:00
88038717dc
update all px4board kconfig
2023-01-28 11:39:51 -05:00
e862fde084
ver: use PX4_INFO_RAW and add vendor version ( #21008 )
2023-01-27 07:13:37 +01:00
aae431e4d5
Removed unused variables in LED driver that were causing fatal build errors on Qurt platform ( #21007 )
2023-01-25 16:35:56 -08:00
cc5509381a
boards: update all NuttX defconfigs
2023-01-25 14:47:48 -05:00
Thomas Stastny
Beat Küng
Julian Oes
Daniel Agar
PX4 BuildBot
David Sidrane
alexklimaj
Eric Katzfey
Silvan Fuhrer
Marco Räth
Dmitry Ponomarev
Leonardo Garcia
Konrad