dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
714 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

85 Commits

Author SHA1 Message Date
Paul Riseborough 6561edb9a5 EKF: Clean up terrain estimation functionality. 
This is a functionally equivalent. It moves all of the code for the terrain estimator into a single function call from the main filter update, making it clear that it is independent of the main filter.
 2017-02-22 14:12:05 +01:00
Paul Riseborough cf9c8de167 EKF: Add arbitrary pitch offset for range sensor 2017-02-22 14:12:05 +01:00
Paul Riseborough 21270bb06a EKF: Use last known position when resuming OF aiding 2017-01-17 08:58:01 +11:00
Paul Riseborough 3c4c09593f EKF: Rationalise console messages 
Combine the observation action buffer and alignment messages
Ensure all data timeout messages are warnings.
Use consistent terminology.
 2016-12-28 10:39:47 +01:00
Paul Riseborough a776b2c549 EKF: Fix bug preventing reset to GPS position when using optical flow 2016-11-26 10:28:58 +01:00
Paul Riseborough 460c9e5250 EKF: Don't try to fuse air data if not in normal aiding mode 
Taking off before passing GPS checks would cause airspeed or sideslip to be fused when the filter was still using a constant position assumption. This would cause large airspeed innovations, invalid wind estimates and degrade filter performance after GPS was gained and position and velocity was reset.
 2016-11-26 10:28:58 +01:00
Paul Riseborough 951c8b77af EKF: Improve wind state reset logic 
Enables wind estimation without an airspeed sensor and enables synthetic sideslip to be used with an airspeed sensor for improved wind state estimation.
Wind states and covariances are reset differently depending on whether airspeed is available.
 2016-11-05 12:19:01 +01:00
Paul Riseborough 352b4ca177 EKF: Allow sideslip fusion with airspeed fusion 2016-11-05 12:19:01 +01:00
CarlOlsson a9182259a5 fixed bug in beta fusion 2016-11-05 12:19:01 +01:00
CarlOlsson e1d9d503e3 updated logic of when to fuse beta. Now synthetic sideslip measurements are fused after 5 seconds of cruise flight with airspeed sensor activated 2016-11-05 12:19:01 +01:00
CarlOlsson dec686afd7 updated parameters 2016-11-05 12:19:01 +01:00
CarlOlsson 5205a8198b added function to control when to fuse beta 2016-11-05 12:19:01 +01:00
Paul Riseborough 8aee45dd96 EKF: Fix bug causing repeated resets if GPS sensor disconnected 2016-11-05 09:36:06 +11:00
Paul Riseborough 968cfae632 EKF: Fix bug preventing fallback from GPS mode if GPS is lost 2016-10-25 08:32:01 +11:00
Roman 63cf3d50be ekf gps reset: do not bother checking for need of reset if gps is not 
available

Signed-off-by: Roman <bapstroman@gmail.com>
 2016-10-24 11:45:36 +02:00
Roman c5f750dcca ekf reset: more granular reset / timeout strategy for gps fusion 
- if both gps position and velocity measurements are rejected for 7 seconds
do a reset
- if only gps position measurements are rejected then wait for 14 seconds
as we still have velocity measurements to constrain the drift in position
- introduced ecl internal parameter for the timeout

Signed-off-by: Roman <bapstroman@gmail.com>
 2016-10-24 11:40:12 +02:00
Roman f80b3481a4 reset the newest output sample for all possible resets 
Signed-off-by: Roman <bapstroman@gmail.com>
 2016-10-12 08:54:38 +02:00
CarlOlsson 51c8715638 fixed issue with airspeed never fused 2016-08-11 15:26:21 +02:00
Paul Riseborough d1d56d9e5e EKF: Add logic to to control wind state estimation 2016-08-11 15:26:21 +02:00
Roman Bapst df0f8fed45 fixed wrong condition on which gps height would be fused (#180) 
- this solves the issue where height innovations would jump
between two regimes

Signed-off-by: Roman <bapstroman@gmail.com>
 2016-08-05 14:45:48 +02:00
Paul Riseborough eb2afc522d EKF: fix bug preventing use of baro as a backup height source 2016-06-30 17:06:32 +10:00
Paul Riseborough 573f252b73 EKF: fix bug preventing GPS use as a backup height source 2016-06-30 17:06:32 +10:00
Paul Riseborough 5f9752cac8 EKF: Improve function names 2016-06-30 17:06:32 +10:00
Paul Riseborough 7bc9217f00 EKF: Clean up control of observation fusion 
All the decision for a sensor are made within a specific function for that sensor and when there is data to process at the fusion time horizon.
Information and warning messages are improved.
 2016-06-30 17:06:32 +10:00
Paul Riseborough 3c84d37175 Merge pull request #156 from PX4/fix_printfs 
EKF: use ECL printfs everywhere
 2016-06-07 09:45:00 +10:00
Paul Riseborough 081e17729c EKF: delay commencement of 3D mag fusion until clear of ground 
Wait until enough height has been gained to be clear of ground based magnetic anomalies. Failure to do so can result in incorrect earth field initialisation.
 2016-06-06 21:59:46 +10:00
Paul Riseborough f08aee0a7d EKF: Fix covariance index bug 2016-06-04 00:36:07 +10:00
Julian Oes b8e2f79005 EKF: correct include paths 2016-06-02 16:29:22 +01:00
Julian Oes ecfd8c867a EKF: use ECL printfs everywhere 
- Changes all printfs to ECL printfs
- Add ECL_ERR.
- Include ecl.h where needed.
- Add forgotten pragma once.
 2016-06-02 16:07:26 +01:00
Paul Riseborough 6a55d908c5 EKF: replace reset event times with event counters 
Using a 64bit integer was unnecessary given it was only being used to detect a new reset event.
 2016-06-01 17:13:00 +10:00
Paul Riseborough 3ec9221c18 EKF: update output observer and capture reset event for EV yaw resets 2016-06-01 17:13:00 +10:00
Paul Riseborough 9f81b8f09e EKF: provide reset protection for external vision height 2016-05-27 13:15:53 +10:00
Paul Riseborough 1b6c5bbafd EKF: Enable height source to be selected independent of EV aiding 2016-05-27 13:14:52 +10:00
Carl Olsson 0fafc49a49 fixed typos (#147) 2016-05-22 17:40:43 +02:00
Paul Riseborough c1b02eaa91 EKF: Don't use 3-axis magnetometer fusion until the tilt is aligned 2016-05-18 21:06:45 +10:00
Paul Riseborough aaac867da8 EKF: Adjust tilt alignment threshold 2016-05-18 20:34:12 +10:00
Paul Riseborough 1540e937b1 EKF: Improve tilt alignment monitoring 
Convert quaternion covariances into an angular alignment variance vector and discard the z component so that yaw uncertainty does not affect the result.
 2016-05-17 11:17:24 +10:00
Paul Riseborough 920d83d68c EKF: Fix bugs preventing use of external vision yaw data 2016-05-14 21:56:41 +10:00
Paul Riseborough 13c3a95bc1 EKF: Add missing line returns 2016-05-14 21:17:30 +10:00
Paul Riseborough b985e58333 EKF: clean up control function 
With the addition of new observation types, the control function has become too large and needed be broken up into separate functions
 2016-05-14 21:17:29 +10:00
Paul Riseborough f4a0f69f6e EKF: print to console when starting EV fusion 2016-05-14 21:17:29 +10:00
Paul Riseborough ac9b7a3df6 EKF: Ensure use of EV aiding inhibits use of other height sources 2016-05-14 21:17:29 +10:00
Paul Riseborough e917d6c7f2 EKF: Add fusion of external yaw data 2016-05-14 21:17:29 +10:00
Paul Riseborough 37a09c61bc EKF: Don't use delayed data to start EV aiding 2016-05-14 21:17:29 +10:00
Paul Riseborough 81469d6621 EKF: Add position, height and velocity reset for EV aiding 2016-05-14 21:17:29 +10:00
Paul Riseborough 481c624975 EKF: Remove use of vehicle arm status 
Use single externally set in-air status for all decisions
 2016-05-10 10:23:08 +10:00
Paul Riseborough 161ac2e051 EKF: ensure position co-variances are reset 
When transitioning into optical flow nav  from a non-aiding condition during ground operation, ensure position covariances are reset as they could be invalid.
 2016-05-08 18:03:09 +10:00
Paul Riseborough 724280fd1f EKF: move calculation of optical flow observation variance into a function 
Allows it to be used when calculating initial state variance
 2016-05-08 15:40:06 +10:00
Paul Riseborough 25682dce91 EKF: Prevent badly conditioned covariance calculation when starting or resetting to optical flow 2016-05-08 10:30:40 +10:00
Paul Riseborough da9d894441 EKF: Improvements to covariance reset 2016-05-07 12:57:41 +10:00