px4dev
|
2a18d6466c
|
Add a bus saturation test for px4io.
|
2013-01-26 14:36:31 -08:00 |
px4dev
|
6ba4cd04fe
|
Handle the completion of an in-progress transaction (STOPF/AF bits) before accepting the start of a new transaction (ADDR).
|
2013-01-26 14:26:02 -08:00 |
px4dev
|
11796e27f2
|
Simplify and tidy the handling of page buffer selection on the readout path.
|
2013-01-26 14:25:22 -08:00 |
px4dev
|
4ab490bd50
|
Only update the servo output values when we are armed.
|
2013-01-26 13:16:24 -08:00 |
px4dev
|
4ea8a64b39
|
Correct the length calculation for register write transfers so that we send all of the requested registers.
|
2013-01-26 13:15:57 -08:00 |
px4dev
|
72fcc8aad3
|
Tidy up the write path.
|
2013-01-26 13:15:27 -08:00 |
px4dev
|
899fbcc7cf
|
Fix cut and paste so that we send direct PWM and read back servo values from the right pages.
|
2013-01-26 13:14:52 -08:00 |
px4dev
|
3a8bbe837e
|
Allow readback of the direct PWM outputs (this mirrors the PWM servo outputs)
|
2013-01-26 13:14:15 -08:00 |
px4dev
|
984e68d76e
|
Add an ioctl for fetching the number of PWM outputs
|
2013-01-26 12:27:42 -08:00 |
px4dev
|
b20c050402
|
Fix two protocol-related typos; get the right status flag name for raw PWM; read back the correct page for PWM output.
|
2013-01-26 12:27:03 -08:00 |
px4dev
|
328af90c9e
|
Merge pull request #179 from PX4/airspeed
Implemented airspeed measurement.
|
2013-01-26 11:10:11 -08:00 |
px4dev
|
4732f1e758
|
Merge pull request #188 from PX4/param_command
Improved param command, show now allows to filter and set allows to set int params
|
2013-01-26 11:09:06 -08:00 |
px4dev
|
f854e2f791
|
Fixes from/inspired by Tridge; enable all mapped R/C inputs, fix various logic errors, be more selective about clearing the RC input type flags for debugging purposes.
|
2013-01-26 00:02:45 -08:00 |
px4dev
|
5fe376c7b9
|
Correctness fixes from Tridge.; increased the minimum poll rate to 50Hz, don't set the input RC timestamp unless we get data.
|
2013-01-26 00:01:25 -08:00 |
px4dev
|
b46d05835b
|
Implement settable failsafe values for PWM outputs.
By default in failsafe mode, PWM output pulses are not generated.
|
2013-01-25 22:58:33 -08:00 |
px4dev
|
900b0d58ef
|
Less debug output.
|
2013-01-25 21:59:31 -08:00 |
px4dev
|
6c75c5909e
|
Move the DMA start to immediately after setting it up; less latency at interrupt time, and no chance of getting start/stop calls out of sync.
|
2013-01-25 21:58:55 -08:00 |
px4dev
|
818e898a7e
|
Fix the handling of max transfer size to leave room for the page/offset bytes.
|
2013-01-25 21:54:04 -08:00 |
px4dev
|
1b30cd2f93
|
Dump a couple of unused member variables.
|
2013-01-25 21:40:18 -08:00 |
Andrew Tridgell
|
8972843b14
|
px4io: fixed mixer load
|
2013-01-25 21:37:48 -08:00 |
Andrew Tridgell
|
f8bea6d07b
|
px4io: fixed cpp error
|
2013-01-25 21:36:19 -08:00 |
Andrew Tridgell
|
57d028fddd
|
px4io: fixed array reference bug
|
2013-01-25 21:35:58 -08:00 |
px4dev
|
82f72b96de
|
Move DMA start for tx/rx into the gap where SCL is still stretched so that there is no risk of receiving the first byte before DMA starts.
|
2013-01-25 21:35:32 -08:00 |
px4dev
|
24f6c6b121
|
Merge branch 'master' into px4io-i2c
|
2013-01-25 19:29:29 -08:00 |
Lorenz Meier
|
81601ad9dc
|
Fixed byte readout order and signed value 16 to 14 bit value conversion
|
2013-01-26 01:04:58 +01:00 |
Simon Wilks
|
0246842c88
|
Enable single wire via ioctl calls and pull the battery voltage from the battery status topic.
|
2013-01-25 01:41:11 +01:00 |
patacongo
|
b6472b58dc
|
Fix some compilation errors when child status disabled; new waitpid logic not encoding/decoding status properly
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5561 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-25 00:01:08 +00:00 |
patacongo
|
a2ec48846f
|
Fix some missing logic and inconsistencies in child status logic; Fix a bug introduced into sigaction()
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5560 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-24 23:18:32 +00:00 |
Simon Wilks
|
23f0be6b02
|
Merge branch 'ioctl' into hott
|
2013-01-24 23:57:54 +01:00 |
Simon Wilks
|
0669d2aee0
|
Merge remote-tracking branch 'upstream/master' into hott
|
2013-01-24 23:27:27 +01:00 |
Simon Wilks
|
b9009390d7
|
Merged and tested against the single wire implementation added to Nuttx r5554.
|
2013-01-24 23:26:12 +01:00 |
Lorenz Meier
|
4baa1821cb
|
Merge branch 'master' of github.com:PX4/Firmware into airspeed
|
2013-01-24 21:41:50 +01:00 |
patacongo
|
888306f728
|
Add psock_poll(); Fix some warnings reported by Lorenz Meier; lm4f logic from JP
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5557 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-24 18:39:53 +00:00 |
patacongo
|
f914a90556
|
apps/examples/nettest and poll: Complete Kconfig files
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5556 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-24 16:28:15 +00:00 |
Lorenz Meier
|
f21d406cbe
|
Added additional example
|
2013-01-24 16:53:31 +01:00 |
Lorenz Meier
|
6d12f147b8
|
Improved param command, show now allows to filter and set allows to set integer params (e.g. param set MAV_TYPE 2)
|
2013-01-24 15:43:12 +01:00 |
px4dev
|
35febbe844
|
Merge Nuttx r5554
|
2013-01-23 23:56:24 -08:00 |
px4dev
|
942cea157d
|
Merge pull request #182 from NosDE/master
BlnkM: Timing changed and amber color for manual mode added
|
2013-01-23 23:15:19 -08:00 |
px4dev
|
0bc836ae1d
|
Implement fetching raw RC input values via the ioctl interface.
|
2013-01-23 22:19:33 -08:00 |
px4dev
|
dce2afde0f
|
Rework the way that we handle the address phase for reads. Drop the _connected test as we talk to IO before starting the thread.
|
2013-01-23 20:18:18 -08:00 |
px4dev
|
dc88dd0abb
|
Merge branch 'master' into px4io-i2c
|
2013-01-23 18:58:19 -08:00 |
px4dev
|
d8a013f872
|
Tinkering.
|
2013-01-23 18:57:16 -08:00 |
px4dev
|
b34311915a
|
Safeguard against back-to-back transactions while setting up to handle a register read request.
|
2013-01-23 18:56:58 -08:00 |
px4dev
|
3244bb83ea
|
Better sanity checking and error handling.
|
2013-01-23 18:56:03 -08:00 |
px4dev
|
1ce1d4460b
|
Merge pull request #183 from PX4/nuttx-merge-5527
Nuttx merge 5527
|
2013-01-23 18:46:12 -08:00 |
Andrew Tridgell
|
6e751d26e8
|
perf: added 'perf reset' command
resets all perf counters
|
2013-01-24 10:26:02 +11:00 |
Andrew Tridgell
|
f4da4bb8ca
|
perf_counter: added perf_reset() and perf_reset_all() calls
useful for watching counters after system reaches stable flight
|
2013-01-24 10:26:02 +11:00 |
patacongo
|
63f8c0a954
|
Add option to used keyboard CODEC in apps/examples/keypadtest
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5554 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-23 23:11:13 +00:00 |
Lorenz Meier
|
e6bc395291
|
Merge branch 'master' of github.com:PX4/Firmware into attitude_filter_improvement
|
2013-01-23 18:24:19 +01:00 |
Lorenz Meier
|
0e01f2b6fb
|
Removed unused files
|
2013-01-23 18:23:55 +01:00 |
Marco Bauer
|
efd4250e84
|
timing changed and amber for manual added
|
2013-01-23 15:38:38 +01:00 |
Marco Bauer
|
deb5fe5187
|
timing changed and amber for manual added
|
2013-01-23 15:29:24 +01:00 |
px4dev
|
b66b234acd
|
Merge branch 'master' into px4io-i2c
|
2013-01-22 19:56:14 -08:00 |
Simon Wilks
|
8ba3fbd0a3
|
Merged
|
2013-01-22 22:16:41 +01:00 |
Julian Oes
|
f14c90c222
|
Some timeout needed to be raised for now to make ubx with baudrate 9600 working
|
2013-01-21 17:42:08 -08:00 |
Lorenz Meier
|
2ebb1812f1
|
Implemented airspeed measurement. Untested
|
2013-01-21 23:45:16 +01:00 |
Simon Wilks
|
ecd01dc2e8
|
We aren't using RS485 but single wire.
|
2013-01-21 23:31:12 +01:00 |
Lorenz Meier
|
ac215185a9
|
Better attitude filter, not sensitive to sudden accelerations
|
2013-01-21 17:30:53 +01:00 |
patacongo
|
70cab4d797
|
Centralize TCP loss-of-connection bit twiddling
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5542 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-20 17:21:42 +00:00 |
px4dev
|
48e497e406
|
Fix a leftover from the earlier merges; building should work now.
|
2013-01-19 18:05:53 -08:00 |
px4dev
|
15c85ba2cb
|
Strip some debugging
|
2013-01-19 18:05:33 -08:00 |
patacongo
|
28a0cf4aa0
|
Yet another repair for the previouis botched recvfrom() fix; Fix telnet driver: It needs to break out of the read loop if 0 (meaning not conneced) of a value < 0 (an error) is encountered.
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5541 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-20 00:41:33 +00:00 |
px4dev
|
5c34da06bc
|
Merge pull request #151 from NosDE/master
BlinkM Driver with Systemstate
|
2013-01-19 13:18:57 -08:00 |
px4dev
|
c1a1207b9a
|
Merge pull request #171 from PX4/fault_detection
Attitude / position estimation and controller improvements
|
2013-01-19 13:17:28 -08:00 |
px4dev
|
7eb7836d2d
|
Merge pull request #169 from PX4/home_position
Home position
|
2013-01-19 13:16:39 -08:00 |
px4dev
|
e72d348548
|
Merge pull request #167 from PX4/log_improvements
Added logging improvements for microSD
|
2013-01-19 12:52:45 -08:00 |
px4dev
|
96df7b7fad
|
Merge pull request #165 from julianoes/feature_ubx_model_configuration
Feature ubx model configuration
|
2013-01-19 12:52:16 -08:00 |
px4dev
|
d7632b1794
|
Drop some commented code now the functionality is implemented.
|
2013-01-19 12:38:53 -08:00 |
px4dev
|
044e1a325a
|
Merge branch 'master' into px4io-i2c
|
2013-01-19 11:43:03 -08:00 |
Lorenz Meier
|
4b9916eded
|
Made threshold a bit nicer, still a magic number
|
2013-01-19 19:32:44 +01:00 |
jgoppert
|
effc3001f4
|
Merge branch 'master' of git://github.com/PX4/Firmware into fault_detection
|
2013-01-19 13:04:02 -05:00 |
patacongo
|
070651221f
|
Add split package logic to improve TCP send performance with delayed ACKs
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5538 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-19 16:40:43 +00:00 |
Lorenz Meier
|
2542722102
|
Fixed selective publication update
|
2013-01-19 17:11:12 +01:00 |
Lorenz Meier
|
c9c64b3f25
|
Added missing flag, tested
|
2013-01-19 17:03:35 +01:00 |
Lorenz Meier
|
d637842825
|
Fixed a number of smaller issues with log changes, ready to merge
|
2013-01-19 16:59:56 +01:00 |
Lorenz Meier
|
f119d9fbda
|
Added home position concept, uORB struct and MAVLink announcement of home position
|
2013-01-19 14:46:26 +01:00 |
Lorenz Meier
|
d463c94ea1
|
Enable / disable logging while running, enabled black box logging (ringbuffer needed), enabled GPS KML logging (does not yet write outputs)
|
2013-01-19 12:45:23 +01:00 |
Lorenz Meier
|
3128529c3b
|
Added logging improvements for microSD
|
2013-01-19 01:31:05 +01:00 |
patacongo
|
3ff155d048
|
Beginnings of definitions for the LPC1788; convert olimex-lpc1766stk to use kconfig-frontends
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5533 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-18 16:37:37 +00:00 |
James Goppert
|
4b2d1690d3
|
Set kalman_demo to only publish when it has valid info.
|
2013-01-18 10:21:20 -05:00 |
px4dev
|
bc35bb23dd
|
HOTFIX: disable interrupt-driven I2C mode, configure pessimistic I2C timeout, correct handling of the NAK generation for I2C master reads.
This looks like it addresses the recent I2C lockup issue, unfortunately it also increases CPU consumption by ~5% for the I2C sensor bus.
|
2013-01-18 00:43:57 -08:00 |
patacongo
|
76753ad9cb
|
Add internal API task_reparent(), used in posix_spawn(). Move libc/spawn/lib_ps.c to sched/task_posixspawn.c; Move libc/spawn/spawn.h to include/nuttx/spawn.h
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5531 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-18 01:52:42 +00:00 |
Julian Oes
|
9ca472bbc7
|
Ubx configuration working again, gps app is still complicated and big but should be wrking better now
|
2013-01-17 16:54:32 -08:00 |
Julian Oes
|
ebaa38ad1b
|
ubx with 38400 working, all messages seem to arrive, configuration procedure is still funny (work in progress)
|
2013-01-17 16:54:32 -08:00 |
Julian Oes
|
dce9b2d045
|
The CFG-NAV5 dynamic model is now checked as well
|
2013-01-17 16:54:32 -08:00 |
Julian Oes
|
80eb66c7a3
|
The config message was wrong, corrected (not tested)
|
2013-01-17 16:54:32 -08:00 |
Julian Oes
|
c5ecf88bfb
|
Added ubx configuration CFG-NAV5 to airborne with less than 2g acceleration (compiling, not tested)
|
2013-01-17 16:54:32 -08:00 |
patacongo
|
2f653578c6
|
Misc bug fixes related to NSH file execution
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5530 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-17 20:25:32 +00:00 |
Lorenz Meier
|
dc5ddb9370
|
Defaulting to full auto in auto mode
|
2013-01-17 14:18:33 -05:00 |
patacongo
|
19e43efe23
|
NSH will now run files from the file system; Add logic to unload and clean-up after running a task from a file system; Extensions to builtin apps from Mike Smith
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5529 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-17 18:32:13 +00:00 |
James Goppert
|
13bb814f20
|
Prevented attitude correction from changing velocity when pos not init.
|
2013-01-17 12:18:20 -05:00 |
James Goppert
|
c2c0baf843
|
Increased process noise.
|
2013-01-17 12:16:21 -05:00 |
James Goppert
|
612385a231
|
Merge branch 'master' of git://github.com/PX4/Firmware into fault_detection
|
2013-01-17 10:50:08 -05:00 |
patacongo
|
e9d0885500
|
Add logic to automatically unload module on exit; Several patches from Mike Smith
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5528 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-17 14:43:55 +00:00 |
px4dev
|
8685f63c72
|
Some gentle massaging to get things building again.
|
2013-01-17 01:18:18 -08:00 |
px4dev
|
1a532d16dd
|
Merge NuttX r5527
|
2013-01-17 01:00:46 -08:00 |
patacongo
|
caeef71797
|
Change the way thread priority is handled in binfmt/ to better match the way that priority is set up for the builtin tasks
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5527 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-17 00:30:12 +00:00 |
patacongo
|
e7e1c6aee0
|
convert configs/sim/nsh to use kconfig-frontends
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5526 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-16 21:38:00 +00:00 |
px4dev
|
4b07a9abd3
|
Add RC input configuration, update at startup and on parameter change (max 2 per second).
|
2013-01-16 13:02:49 -08:00 |
patacongo
|
a568e1e63a
|
Add a binary 'loader' so that builtin applications can be executed from the BINFS file system
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5525 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-16 19:08:23 +00:00 |
James Goppert
|
34d70bea4b
|
Control tuning.
|
2013-01-16 13:55:49 -05:00 |
James Goppert
|
ded442fd19
|
Added position initialization.
|
2013-01-16 13:27:04 -05:00 |
patacongo
|
38efdf0ce3
|
Rename apps/include/apps.h to builtin.h. Move parts of apps/builtins/exec_builtin.c to binfmt/libbuiltin/libbuiltin_utils.c
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5524 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-16 17:05:00 +00:00 |
patacongo
|
4f7967b4c6
|
apps/builtin/binfs.c moved to nuttx/fs/binfs/fs_binfs.c
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5523 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-16 15:41:27 +00:00 |
patacongo
|
77efc9f9cd
|
BINFS now supports open, close, and FIOC_FILENAME ioctl
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5522 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-16 14:14:14 +00:00 |
px4dev
|
7b367c3eb3
|
Beat the px4io driver into compilable shape. Just missing RC input configuration now.
|
2013-01-15 23:01:04 -08:00 |
px4dev
|
646b926ac9
|
minor doc fix
|
2013-01-15 23:00:21 -08:00 |
px4dev
|
d207d22a4f
|
compile fix
|
2013-01-15 22:59:57 -08:00 |
px4dev
|
b4dcdae03d
|
Add support for battery current scaling. Add feedback for mixer load operations.
|
2013-01-15 22:22:15 -08:00 |
jgoppert
|
41ac3fdef9
|
Increased fault threshhold.
|
2013-01-16 00:25:53 -05:00 |
jgoppert
|
f8811649cb
|
Controller/ EKF tuning.
|
2013-01-16 00:24:14 -05:00 |
jgoppert
|
ce3f835c63
|
Mag and velocity measurement fix. Fault detection working.
|
2013-01-15 23:36:01 -05:00 |
James Goppert
|
68a6a64213
|
Working on velocity errors.
|
2013-01-15 18:25:08 -05:00 |
patacongo
|
fcb316906d
|
Implement redirection of output from NSH builtin commands to a file in a mounted volume
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5521 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-15 21:01:37 +00:00 |
James Goppert
|
afb69cd054
|
Reducing pos/att correction update rates for debugging.
|
2013-01-15 15:11:24 -05:00 |
James Goppert
|
28ef7aa1be
|
Refactored RPos. Increased global pos output rate for debugging.
|
2013-01-15 14:03:04 -05:00 |
James Goppert
|
68b92cd4fc
|
Slowed HIL status updates. Also prevented posCor. when gps not init.
|
2013-01-15 13:21:13 -05:00 |
James Goppert
|
9cf3d51aec
|
Made fault tolerances adjustable.
|
2013-01-15 13:12:00 -05:00 |
James Goppert
|
edf0a6bae7
|
Added check for valid attitude data.
|
2013-01-15 12:37:12 -05:00 |
James Goppert
|
022c30ea4f
|
Enabled kf to run w/o gps.
|
2013-01-15 12:17:09 -05:00 |
James Goppert
|
281372ef3a
|
Added mag dip/dec as parameters.
|
2013-01-15 11:36:49 -05:00 |
James Goppert
|
8b6660fc36
|
Fixed param issue.
|
2013-01-15 11:16:28 -05:00 |
James Goppert
|
d02a24ec82
|
Adding comments to ekf.
|
2013-01-15 11:00:52 -05:00 |
px4dev
|
0eb5a070f1
|
Checkpoint: more work on the px4io driver. Add raw PWM passthrough ioctl.
|
2013-01-15 00:41:47 -08:00 |
px4dev
|
112f5ea969
|
Add support for raw PWM passthrough from FMU via IO.
|
2013-01-15 00:41:13 -08:00 |
px4dev
|
f3a587dfce
|
Wire the I2C device code into the register handler.
|
2013-01-15 00:40:41 -08:00 |
px4dev
|
2686344d58
|
Adjust the default deadzone for RC inputs per feedback.
|
2013-01-15 00:40:15 -08:00 |
px4dev
|
8da9a2c149
|
Merge branch 'master' into px4io-i2c
|
2013-01-14 21:20:17 -08:00 |
px4dev
|
854c6436b4
|
Pull NuttX up to the 6.24 release.
Merge branch 'nuttx-merge-5447'
|
2013-01-14 21:01:58 -08:00 |
James Goppert
|
5b0aa490d6
|
Added P0. Hid some printing. Corrected fault detection.
|
2013-01-14 18:38:32 -05:00 |
James Goppert
|
02a905df4c
|
Merge branch 'master' of git://github.com/PX4/Firmware into fault_detection
|
2013-01-14 18:13:07 -05:00 |
Lorenz Meier
|
35f0f570a6
|
Hotfix for current active waypoint ID
|
2013-01-14 23:48:07 +01:00 |
James Goppert
|
4613d1247d
|
Added param comments for FWB controller.
|
2013-01-14 17:15:43 -05:00 |
Marco Bauer
|
f0edb59d7e
|
some major changes
|
2013-01-14 21:58:42 +01:00 |
patacongo
|
cc3614dfe8
|
Finish dup logic for open files; fix bug in sigtimedwait(), would return wrong signo value if the signal was already pending
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5517 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-14 19:22:32 +00:00 |
James Goppert
|
c49320a03e
|
Working on fault detection tolerances.
|
2013-01-14 13:49:30 -05:00 |
James Goppert
|
a13cf90e0a
|
Increased KF process noise.
|
2013-01-14 13:12:01 -05:00 |
px4dev
|
c38ad4ded5
|
Fix the 'time' test, now that rand() seems to be working.
|
2013-01-14 10:08:47 -08:00 |
Julian Oes
|
8bc2338466
|
Adapted upper and lower values for test jig voltages
|
2013-01-14 09:18:17 -08:00 |
jgoppert
|
940d43cb9c
|
Merge branch 'master' of git://github.com/PX4/Firmware into fault_detection
|
2013-01-14 11:58:21 -05:00 |
patacongo
|
930f9a1351
|
Add support for dup2'ing files. Infrastructure and ROMFS done. Still need FAT, BINFS, NXFFS, and NFS
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5516 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-14 15:42:03 +00:00 |
px4dev
|
5c60ed9a94
|
Fix up FMU input timeout handling.
Fix the FMU auto OK LED status.
Strip out unused fields from the system state structure.
|
2013-01-14 01:11:29 -08:00 |
px4dev
|
06b66ad065
|
Don't advertise things we don't have anymore.
|
2013-01-14 01:09:42 -08:00 |
px4dev
|
2dc47160f4
|
Factoring and comments.
|
2013-01-14 00:30:18 -08:00 |
px4dev
|
2311e03379
|
Start reworking the px4io driver to use the I2C interface instead.
|
2013-01-14 00:19:01 -08:00 |
px4dev
|
6e291ddedc
|
Add a mechanism for sending multi-part messages to the I2C driver base class.
|
2013-01-14 00:18:05 -08:00 |
jgoppert
|
f2d2aafb8d
|
Fault detection working, but GPS velocity measurement causing fault.
Possible error in HIL script or progpagation/ F matrix of EKF.
|
2013-01-14 01:32:34 -05:00 |
jgoppert
|
3db216380b
|
Changing measurement units for gps, not working well yet.
|
2013-01-14 01:09:02 -05:00 |
px4dev
|
4e38615595
|
Major workover of the PX4IO firmware for I2C operation.
|
2013-01-13 19:05:01 -08:00 |
px4dev
|
8ebe21b27b
|
Checkpoint - I2C protocol register decode
|
2013-01-13 19:05:01 -08:00 |
px4dev
|
b0fb86a693
|
Sketch out the protocol as it will be on top of I2C
|
2013-01-13 19:05:01 -08:00 |
px4dev
|
1cecba2a86
|
Turn off i2c slave debug output for real.
|
2013-01-13 19:05:01 -08:00 |
px4dev
|
5e35491a38
|
We can't have DMA on both I2C1 and USART2. Since we need it more for I2C, and since USART2 is going back to being ignored once I2C works, let's make the call.
Turn off the debug output on I2C for now.
|
2013-01-13 19:05:01 -08:00 |
px4dev
|
329f595bca
|
Don't try to set up serial polling before the HRT has been started.
|
2013-01-13 19:05:00 -08:00 |
px4dev
|
469d13fdfe
|
Implement serial receive DMA for the F1xx. This is not quite working right yet. Some clients work, others not so much.
|
2013-01-13 19:05:00 -08:00 |
px4dev
|
97136375e3
|
Turn off the I2C register dump at startup.
|
2013-01-13 19:05:00 -08:00 |
px4dev
|
4f285f7c80
|
Configure the DMA channels in circular mode so that we don't have to deal with the case where DMA stops but the master is still talking.
Use AF as well as STOPF to decide when transfer has ended. We don't seem to get STOPF when we are transmitting.
|
2013-01-13 19:05:00 -08:00 |
px4dev
|
3cea0959b7
|
Implement a simple byte loopback server on I2C for more testing.
|
2013-01-13 19:05:00 -08:00 |
px4dev
|
2fb820fabd
|
I2C slave RX DMA works.
|
2013-01-13 19:05:00 -08:00 |
px4dev
|
0dab53ae26
|
Implement I2C slave DMA. Not working yet.
|
2013-01-13 19:05:00 -08:00 |
px4dev
|
f12fa7ee06
|
Don't do retries, since it just complicates things.
|
2013-01-13 19:04:59 -08:00 |
px4dev
|
7c2445f74d
|
Don't waste time printing when we have errors - that causes the master to time out
|
2013-01-13 19:04:59 -08:00 |
px4dev
|
811790a14f
|
Checkpoint I2C slave work on IO
|
2013-01-13 19:04:59 -08:00 |
James Goppert
|
5745cfae38
|
Tracking down gps ekf bug, not enough precision for GPS in rad.
|
2013-01-13 21:12:24 -05:00 |
px4dev
|
9faf348cf5
|
Merge pull request #156 from jgoppert/sensor_hil_rebase
Rebase of changes to sensor_hil_fixedwing branch.
|
2013-01-13 17:55:15 -08:00 |
James Goppert
|
63e6ea1b95
|
Changed fault tolerances.
|
2013-01-13 19:51:40 -05:00 |
James Goppert
|
0ccdbd78f6
|
More formatting.
|
2013-01-13 19:23:59 -05:00 |
James Goppert
|
e02791ee8e
|
Added assertion, fixed formatting.
|
2013-01-13 19:21:40 -05:00 |
James Goppert
|
69f6fe51bc
|
More fixes.
|
2013-01-13 19:08:27 -05:00 |
James Goppert
|
e3d0e0216b
|
Fixed comment.
|
2013-01-13 19:05:58 -05:00 |
Lorenz Meier
|
5ad8e645f4
|
Removed last bogus references to battery voltage from sensor combined topic
|
2013-01-14 00:42:20 +01:00 |
James Goppert
|
f7c31e4d80
|
Reduced stack size for mavlink receiver.
|
2013-01-13 18:41:03 -05:00 |
James Goppert
|
56e15ab1f4
|
Working on comments.
|
2013-01-13 18:38:09 -05:00 |
James Goppert
|
ea3ce8de85
|
Reboot fix.
|
2013-01-13 18:22:35 -05:00 |
James Goppert
|
6d8983e908
|
Fixed HIL state machine issue with reboot.
|
2013-01-13 17:43:30 -05:00 |
James Goppert
|
a40f41d216
|
Change default vehicle type to fixedwing.
|
2013-01-13 17:35:56 -05:00 |
James Goppert
|
464c5245f2
|
Rebase of changes to sensor_hil_fixedwing branch.
|
2013-01-13 17:25:45 -05:00 |
Lorenz Meier
|
0fdf962356
|
Merge pull request #150 from PX4/app-auto-deps
Use the compiler to generate app dependencies
|
2013-01-13 13:54:47 -08:00 |
px4dev
|
ff146cc5b1
|
Merge pull request #148 from PX4/adc_integration
Selected adjustments / fixes to make old apps compatible with new-style ADC
|
2013-01-13 13:43:45 -08:00 |
Lorenz Meier
|
9ac2684ca0
|
Printing error reason in warning
|
2013-01-13 22:42:12 +01:00 |
px4dev
|
58ea9fbf01
|
Merge pull request #154 from PX4/file_test_fix
Fixed #153 - when no microSD card is present, test used to hang, now abo...
|
2013-01-13 11:16:03 -08:00 |
patacongo
|
b3f3dd123c
|
Use SIGCHLD with waitpid(); implemented wait() and waitid()
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5515 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-13 18:53:00 +00:00 |
Marco Bauer
|
825012b029
|
switched to initialiser list and member variables
|
2013-01-13 18:04:07 +01:00 |
Marco Bauer
|
edc3ae7b6c
|
some changes in structure
|
2013-01-13 13:50:07 +01:00 |
Lorenz Meier
|
ca690f6027
|
Fixed #153 - when no microSD card is present, test used to hang, now aborts with error.
|
2013-01-13 09:35:56 +01:00 |
Lorenz Meier
|
a6a6d9c457
|
Merge branch 'master' of github.com:PX4/Firmware into adc_integration
|
2013-01-13 09:25:12 +01:00 |
Lorenz Meier
|
054bb69cc7
|
Showing correct test count also in success case
|
2013-01-13 09:24:51 +01:00 |
patacongo
|
ffda55b34a
|
Cosmetic cleanup from SIGCHLD changes
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5514 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-13 00:35:47 +00:00 |
Lorenz Meier
|
acbfd66e67
|
Cleaned up tests further, in anticipation of merges with other branches
|
2013-01-12 23:26:26 +01:00 |
Lorenz Meier
|
15b61d4c15
|
Improved battery voltage init, removed bogus printf() from debugging
|
2013-01-12 22:41:32 +01:00 |
Marco Bauer
|
8ec566d0cb
|
fix number of satellites
|
2013-01-12 21:54:39 +01:00 |
px4dev
|
dba244a8d4
|
Fix a build breaker, remove C*HDRS as they aren't used.
|
2013-01-12 12:46:46 -08:00 |
px4dev
|
1c63eda98b
|
Objects depend on the makefile chain as well.
|
2013-01-12 12:39:29 -08:00 |
px4dev
|
5b07efdbeb
|
Automatically generate depdencies for source files as they are compiled, rather than using the NuttX dependency generator tool.
|
2013-01-12 12:10:06 -08:00 |
px4dev
|
6d301710d9
|
Suppress warnings from ARM's DSP_Lib code that are spamming developers to no benefit.
Addresses #149
|
2013-01-12 12:08:03 -08:00 |
patacongo
|
b58281cab8
|
Fix a *critical* bug in the task exit logic. Implements SIGCHILD
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5513 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-12 19:58:45 +00:00 |
Marco Bauer
|
41cef1d6c5
|
merged systemstate into blinkm driver
|
2013-01-12 10:26:37 +01:00 |
Lorenz Meier
|
6c1b00e22f
|
Counting the number of tests correctly
|
2013-01-12 00:53:45 +01:00 |
Lorenz Meier
|
dad7f9f436
|
Selected adjustments / fixes to make old apps compatible with new-style ADC driver
|
2013-01-12 00:38:49 +01:00 |
patacongo
|
43e22b2b98
|
Fix an error handling bug in the fread logic
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5511 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-11 19:08:51 +00:00 |
Lorenz Meier
|
419896f983
|
WP fix contributed by James Goppert
|
2013-01-11 18:02:47 +01:00 |
patacongo
|
e7a5090e55
|
Various changes while debugging posix_spawn
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5510 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-11 16:53:44 +00:00 |
Simon Wilks
|
64925c33cd
|
Merged
|
2013-01-11 16:52:42 +01:00 |
px4dev
|
2b37f33a22
|
The tests structure doesn't need to be writable.
|
2013-01-11 02:39:56 -08:00 |
px4dev
|
0267782782
|
Recover changes lost to bad merging.
|
2013-01-11 02:32:05 -08:00 |
px4dev
|
ca305933a1
|
Merge commit 'eaf1d8063cc707b1041e8583663d9edd45f42c5d' into nuttx-merge-5447
Build system updates to sync with NuttX upstream.
|
2013-01-11 00:45:25 -08:00 |
px4dev
|
ccf9882dc5
|
Merge branch 'master' into nuttx-merge-5447
|
2013-01-11 00:39:22 -08:00 |
Lorenz Meier
|
31ca806958
|
More print cleanups in commander app
|
2013-01-11 08:24:28 +01:00 |
Lorenz Meier
|
9608dfefa3
|
Stripped a lot of text from commander app
|
2013-01-11 08:18:12 +01:00 |
Lorenz Meier
|
b52402dbe2
|
Fixed code style for mavlink app
|
2013-01-11 07:48:09 +01:00 |
Lorenz Meier
|
fdf1c712b1
|
Fixed code style for conversions
|
2013-01-11 07:47:22 +01:00 |
Lorenz Meier
|
970ae0c13e
|
Fixed code style for attitude estimator
|
2013-01-11 07:46:40 +01:00 |
Lorenz Meier
|
cded2787f0
|
Fixed code style for multirotor_att_control app
|
2013-01-11 07:45:24 +01:00 |
Lorenz Meier
|
cf563eda86
|
px4io code style
|
2013-01-11 07:44:17 +01:00 |
Lorenz Meier
|
dc100f2020
|
Fixedwing controller code style
|
2013-01-11 07:44:03 +01:00 |
Lorenz Meier
|
9ab20b11b6
|
Code style
|
2013-01-11 07:42:09 +01:00 |
Lorenz Meier
|
d6116d9564
|
Merge branch 'master' of github.com:PX4/Firmware into fixedwing
|
2013-01-11 07:36:44 +01:00 |
Lorenz Meier
|
65c8028629
|
Working on override channel mapping, allowed trim cal only with RC on
|
2013-01-11 07:35:40 +01:00 |
Julian Oes
|
b5eccef69e
|
Started with px4io stop implementation
|
2013-01-10 15:49:53 -08:00 |
Julian Oes
|
5e20dd1736
|
Added support for IO bootloader revision 3 on FMU
|
2013-01-10 15:35:47 -08:00 |
patacongo
|
7609c9a192
|
Fix problem with initialization of file actions
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5508 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-10 23:06:23 +00:00 |
patacongo
|
f011bd7ef6
|
Added a test of posix_spawn()
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5507 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-10 21:39:57 +00:00 |
patacongo
|
6f241ed044
|
Add interfaces to dynamically change symbol tables used by posix_spawn, execv, and execl. This is needed for testing.
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5506 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-10 20:00:08 +00:00 |
Lorenz Meier
|
1d4feb6905
|
Merged sdlog_buffering branch
|
2013-01-10 14:43:59 +01:00 |
Lorenz Meier
|
1a107bd7bf
|
Added warning, needs more work on the rotation matrix output
|
2013-01-09 16:56:23 +01:00 |
Lorenz Meier
|
447bcb990d
|
Merge branch 'fixedwing' of github.com:PX4/Firmware into fixedwing
|
2013-01-09 16:52:45 +01:00 |
Lorenz Meier
|
4435befefd
|
Added offset parameters for roll, pitch and yaw
|
2013-01-09 16:52:15 +01:00 |
Lorenz Meier
|
955ae0aa45
|
Merged
|
2013-01-09 16:40:09 +01:00 |
Lorenz Meier
|
16e49c447d
|
Added support for battery voltage and differential pressure to logging and plot script
|
2013-01-09 16:37:45 +01:00 |
Lorenz Meier
|
e1a6f1b910
|
Merge branch 'master' of github.com:PX4/Firmware into sdlog_buffering
|
2013-01-09 16:26:12 +01:00 |
Lorenz Meier
|
d957f8e004
|
Hotfix: Copying from right actuator topic on IO if FMU and IO PWM outs are enabled
|
2013-01-09 13:11:06 +01:00 |
Lorenz Meier
|
6c93cbfa5e
|
Merge branch 'master' of github.com:PX4/Firmware into fixedwing
|
2013-01-09 09:41:52 +01:00 |
Lorenz Meier
|
6f8081b5ea
|
Merge branch 'master' of github.com:PX4/Firmware into sdlog_buffering
|
2013-01-09 09:41:07 +01:00 |
Lorenz Meier
|
3bb145f584
|
Enabled and tested ring buffer, logging at full 250 Hz sensor rate
|
2013-01-09 09:39:51 +01:00 |
px4dev
|
b5424a4d02
|
Fix the CMSIS DSP_Lib include path specification. This avoids some scary messages from 'make depend'.
|
2013-01-08 14:40:20 -08:00 |
Lorenz Meier
|
b48f99b601
|
Updated state switching to most recent state machine rev
|
2013-01-08 22:22:22 +01:00 |
Lorenz Meier
|
780087acf0
|
Merged with master
|
2013-01-08 21:25:38 +01:00 |
unknown
|
1998ce1205
|
Battery-Warn-State added to struct Vehicle_Status
|
2013-01-08 20:37:47 +01:00 |
Lorenz Meier
|
b78a430424
|
Merge branch 'master' of github.com:PX4/Firmware into sdlog_buffering
|
2013-01-08 17:41:33 +01:00 |
Lorenz Meier
|
8cc9fb9e2c
|
Merge branch 'master' of github.com:PX4/Firmware into fixedwing
|
2013-01-08 17:40:44 +01:00 |
px4dev
|
01ea8eb54f
|
Test for CortexM4 and FPU rather than the ARM mathlib-internal define.
|
2013-01-08 08:26:04 -08:00 |
px4dev
|
ee5cd2c95a
|
Rather than assume that px4fmu means CMSIS DSPlib, test for cortex M4 and FPU.
|
2013-01-08 08:25:06 -08:00 |
Lorenz Meier
|
435bae6542
|
Added logging with worker thread for microSD writes, untested, but feature-complete
|
2013-01-08 14:57:12 +01:00 |
patacongo
|
3d160e45b6
|
Documentation update
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5491 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-08 00:04:12 +00:00 |
patacongo
|
a9f2c6fa8a
|
Fixed ARM vfork; re-enabled vfork OS test
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5490 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-07 23:50:25 +00:00 |
patacongo
|
5a9162f017
|
Disable the vfork() OS test... it fails
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5489 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-07 23:09:09 +00:00 |
Lorenz Meier
|
2169e1f808
|
Merge branch 'master' of github.com:PX4/Firmware into mathlib
|
2013-01-08 00:02:57 +01:00 |
patacongo
|
66cdd288ab
|
Add ostest vfork test (does not work yet)
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5488 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-07 21:41:20 +00:00 |
Lorenz Meier
|
fe5f9d46d5
|
Merge branch 'master' into fixedwing
|
2013-01-07 22:23:41 +01:00 |
Lorenz Meier
|
e24dd0f684
|
Fixed minor compile error
|
2013-01-07 22:23:24 +01:00 |