dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
30,343 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

30343 Commits

Author SHA1 Message Date
Matthias Grob 50c5150471 arch.sh: work around gazebo AUR build error and correct comments 2019-10-12 08:38:39 +02:00
Matthias Grob bba464d722 arch.sh: enable multicore gazebo compilation 2019-10-12 08:38:39 +02:00
Matthias Grob 7dd1be65ca arch.sh: add gazebo installation 2019-10-12 08:38:39 +02:00
Beat Küng 803a71928f fmu-v3: enable DShot 
Disables RX DMA on TEL4 and IO debug serial port
 2019-10-11 08:14:17 +02:00
Beat Küng 82106105b7 parameters: defer auto-saving to after disarming for flash-based params 
This is especially important for DShot, that does not update when the CPU
stalls.
 2019-10-11 08:14:17 +02:00
Beat Küng 67500123e3 fmu-v5: add dshot support 
But only on the first 4 FMU outputs, as the next ones conflict with px4io
serial dma (UART8_RX)

RX DMA is disabled on the GPS port as well (conflicts with TIM1).
 2019-10-11 08:14:17 +02:00
Beat Küng 8a9744d05a dshot: allow boards to enable dshot only on a subset of the timers 2019-10-11 08:14:17 +02:00
Beat Küng 93a12436a3 parameters: update perf counter for flash-based param_save_default() 2019-10-11 08:14:17 +02:00
Beat Küng a545f7ee16 mixer_module: extend printf status output 2019-10-11 08:14:17 +02:00
Beat Küng b080679146 kakutef7, kopis airframe: enable dshot & telemetry 2019-10-11 08:14:17 +02:00
Beat Küng d0a7490222 dshot: update timer generation before DMA request 
This reloads the timer configuration before triggering DMA. Without that,
in rare cases, there were 17 bits sent instead of 16.
The 1. bit (1. pulse) was always wrong (too much), the rest of the bits
were the correct DShot packet that was meant to be sent.
 2019-10-11 08:14:17 +02:00
Beat Küng 7445c25fcc dshot: check if DMA still in progress 
No other functional change, just restructuring.
 2019-10-11 08:14:17 +02:00
Beat Küng 182efaa757 dshot: reduce static buffer size 
And handle failures of up_dshot_init().

On Omnibus: reduces memory usage if dshot is enabled by ~1.0KB.
The buffer is roughly 1KB in size.
 2019-10-11 08:14:17 +02:00
Beat Küng e78250ab8d dshot telemetry: retrieve & print ESC info with 'dshot esc_info' CLI command 2019-10-11 08:14:17 +02:00
Beat Küng 26648ad0b9 dshot: add support to send commands via CLI 
This enables the possibility to permanently reverse motor directions :)
 2019-10-11 08:14:17 +02:00
Beat Küng 65f3c7f93d dshot: add telemetry and publish esc_status message 2019-10-11 08:14:17 +02:00
Beat Küng d44302c03b module_schema.yaml: add 'decimal' and 'increment' for floats 2019-10-11 08:14:17 +02:00
Beat Küng 4c4ce09005 esc_status: trim the message and remove unused fields 2019-10-11 08:14:17 +02:00
Beat Küng 69c10dcaac dshot: move implementation to a separate directory & library 
So that the static memory overhead is not added to targets w/o dshot
 2019-10-11 08:14:17 +02:00
Beat Küng 775916ef11 kakutef7: enable dshot 2019-10-11 08:14:17 +02:00
Beat Küng 23dbd9426a dshot: handle dcache, flush cache before DMA transfer 2019-10-11 08:14:17 +02:00
Beat Küng 3234aca53b px4_micro_hal: add PX4_ARCH_DCACHE_LINESIZE definition 2019-10-11 08:14:17 +02:00
Beat Küng 132dcdaf25 beta75x airframe: enable DShot600 2019-10-11 08:14:17 +02:00
Igor Mišić 543a057f80 fmu-v4: add dshot timer config 2019-10-11 08:14:17 +02:00
Beat Küng ac82c5114b omnibusf4sd: add dshot timer config 2019-10-11 08:14:17 +02:00
Beat Küng d8ef1b59b9 ROMFS: add dshot startup support 2019-10-11 08:14:17 +02:00
Beat Küng a161be6ec8 dshot: add dshot driver 
Supports all DShot modes, but no telemetry yet.
It includes the modes and capture configuration from FMU so that it serves
as drop-in replacement.
 2019-10-11 08:14:17 +02:00
Beat Küng f3eea85bef MOT_ORDERING, MC_AIRMODE: move param def to mixer_module and 'Mixer Output' group 2019-10-11 08:14:17 +02:00
Beat Küng 2a492a8e47 fmu: remove unused include and variable 2019-10-11 08:14:17 +02:00
Igor Mišić 5bd9659301 stm32 timers: add dshot implementation 2019-10-11 08:14:17 +02:00
TSC21 061ee15139 update sitl_gazebo submodule (10/10/2019) 2019-10-10 15:51:09 +02:00
Dusan Zivkovic ab2e235333 Commander: bugfix: get all available messages on the subsystem_info topic 2019-10-10 13:12:31 +02:00
Dusan Zivkovic b6f21fa76e voted_sensors_update: fix style 2019-10-10 10:31:56 +02:00
Dusan Zivkovic 316a188e8e voted_sensors_update: parameter CAL_*_EN enables sensor with id CAL_*_ID 2019-10-10 10:31:56 +02:00
Dusan Zivkovic d3e79c4726 voted_sensors_update: set priority properly in case of late mag subscriptions or sensors enabled param changes 2019-10-10 10:31:56 +02:00
Matthias Grob 7f63ed8202 Arch setup script (#13111) 
* ubuntu.sh: fix space and capitalization

* Add setup script for Arch Linux

* arch.sh: remove numerous confirmations, added some base packages

* setup scripts: adjust messages according to review
 2019-10-10 08:59:11 +02:00
Julian Oes 307dc3e32d mavlink: fix boot complete without lockstep 
Without lockstep the actual monotonic clock of the host computer is
used. Therefore, this time is likely much more than 20 seconds and the
check if the boot complete happened in time will fail immediately.

Therefore, it probably makes more sense to count the time from the first
mavlink creation.
 2019-10-10 08:58:34 +02:00
Julian Oes ea35923d3a navigator: bugfix to prevent NaN setpoints 
The asinf function is NaN outside of -1 to 1. Therefore, it probably
makes sense to constrain the input to prevent NaN setpoints further down
the line.
 2019-10-09 08:36:34 -06:00
Matthias Grob ca711fecc7 Commander: improve message for RC override event 2019-10-09 15:34:46 +02:00
mcsauder f9a5c91f8c Deprecate vehicle_attitude_sub from MulticopterLandDetector as it is no longer utilized. 2019-10-09 09:48:17 +02:00
Lasse 5ac0a3043b Clarify Documentation of THR_MDL_FAC 
The documentation of the thrust model parameter `THR_MDL_FAC` did not
mention both thrust and "PWM" being relative values. Also the use of the
term PWM could be misleading, since the model is applicable to CAN ESCs
as well.

This commit rephrases the user documentation string and a few source
code comments, but no logic changes are made.

Closes PX4/Firmware#13105
 2019-10-09 08:06:51 +02:00
Matthias Grob c1faea8d32 Commander: add const qualifiers for clarity 2019-10-09 08:03:07 +02:00
Matthias Grob 63f2c009c7 PreflightCheck: refactor failureDetectorCheck return value 2019-10-09 08:03:07 +02:00
Matthias Grob 8e0ee88e0a PreflightCheck: add const qualifiers to parameters 
to help readability
 2019-10-09 08:03:07 +02:00
Matthias Grob c570dc9315 PreflightCheck: remove goto from imu consistency check 2019-10-09 08:03:07 +02:00
mcsauder 6066300757 Set a default signal_quality value in the MavlinkReciever::handle_message_distance_sensor() method. 2019-10-08 21:19:47 +01:00
mcsauder 5ccba5541d Added missing fields and a TODO with commented field to the MavlinkReciever::handle_message_distance_sensor(). 2019-10-08 21:19:47 +01:00
dusan19 8c4d32ff4b navigator: when setting pos_sp_triplet yaw, also set the yaw valid flag to true 2019-10-07 20:53:40 -04:00
Julian Oes 741f6787a7 mavlink: disable sending RC override 
This was added to enable a Pixhawk to be used as an RC input for e.g.
SITL. As far as we're aware of that's not really used. However, sending
this can cause issues if multiple Pixhawks are in the same network.
Also, is uses up some of the MAVLink bandwidth.

Therefore, it's probably best to remove that feature for now.
 2019-10-07 09:59:17 -04:00
TSC21 9a4a02a255 uorb_rtps_message_ids.yaml: fix typo 2019-10-07 12:58:15 +01:00