fd771f67f2
Adjust the control mapping from DSM receivers to correspond to the standard PPM control mapping for channels 0-4.
2012-12-04 22:00:24 -08:00
7c3b28d503
Lock out the PPM decoder if the DSM or S.bus decoders have seen a frame recently.
2012-12-04 09:52:16 -08:00
1485a4ec1a
Fix breakage to the DSM parser introduced with the input prioritisation logic. Back out to a "any input wins" strategy; connecting multiple receivers to I/O at the same time is currently not supported (read: strange things will happen).
2012-12-03 23:20:28 -08:00
ef4a54666d
Harmonized PPM, S.BUS and DSM input (order: first preference S.Bus, then DSM, then PPM, first available and valid source is chosen), tested with FMU, valid channel inputs
2012-11-30 14:57:54 +01:00
c961dd8bab
Just for fun, add a (completely untested) S.bus decoder.
2012-11-30 01:34:33 -08:00
9fa794a8fa
Rework the PX4IO software architecture:
...
- Use a separate thread for handing R/C inputs and outputs.
- Remove all PX4IO R/C receiver configuration; it's all automatic now.
- Rework the main loop, dedicate it to PX4FMU communications after startup.
- Fix several issues in the px4io driver that would cause a crash if PX4IO was not responding.
2012-11-30 00:02:47 -08:00
9c8101d4f1
Add some more information to comments.
2012-11-29 10:18:21 -08:00
d0efd1a419
Fix the DSM (spektrum) protocol decoder, and add some format auto-detection to it.
2012-11-29 00:35:21 -08:00
ff3a014971
Another take on Spektrum/DSM frame decoding, based on more careful examination of the relevant docs.
2012-11-07 02:47:01 -08:00
px4dev
Lorenz Meier