dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
34,126 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

34126 Commits

Author SHA1 Message Date
Daniel Agar 3fff512ec0 new standalone drivers/system_power (split out of adc) 
- system_power portion of drivers/adc split into a new standalone module (drivers/system_power)
 - additional availability flags added to system_power.msg so we know what boards even support (previously certain flags were faked if not available)
 - drivers/system_power scheduled at minimum rate by default, but now also scheduled immediately on any relevant GPIO events
 - now instead of running at 100 Hz with heavily reduced logging we can run at a minimal rate, log at full rate, and catch relevant changes immediately
 2021-01-16 14:20:54 -05:00
Silvan Fuhrer cee4016665 Preflight checks: Airspeed checks update 
-check for valid airspeed_validated (declared valid plus updated less than 1s ago)
-added param (COM_ARM_ARSP_EN) to enable/disable check for max airspeed for arming set max
airspeed limit to half of stall airspeed

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-01-16 10:26:55 -05:00
Can Berk Durmus ba9611621d Retune Typhoon H480 PID 2021-01-16 09:32:09 +01:00
David Sidrane 1c0ed74d6a platforms/nuttx/NuttX/nuttx net backports 2021-01-15 11:44:21 -08:00
Beat Küng ade3871bee adc: add support for multiple sensor voltage channels 2021-01-15 10:57:20 -05:00
Beat Küng e2337a34eb system_power: add comp_5v_valid and can1_gps1_5v_valid 
And fill it in from the v5x GPIO expander.
 2021-01-15 10:57:20 -05:00
Beat Küng 704a82aaa6 gpio: extend support for /dev/gp* GPIO's 
Note that there's a small CLI interface change.
 2021-01-15 10:57:20 -05:00
Beat Küng 88fe047556 px4/v5x: enable mcp23009 GPIO driver 2021-01-15 10:57:20 -05:00
Beat Küng 3e4b8763a5 nuttx: add mcp23009 gpio driver 2021-01-15 10:57:20 -05:00
Beat Küng e1983381e7 rcS: add SYS_PARAM_VER to param reset_all exception list 
Avoids an extra reboot when resetting the airframe
 2021-01-15 10:57:20 -05:00
Matej Frančeškin ba6a8080ea mavlink: don't respond to MAV_CMD_REQUEST_MESSAGE if component doesn't match 
PX4 is responding with NACK to MAV_CMD_REQUEST_MESSAGE from a GCS to
payload-manager which confuses a GCS.
PX4 shouldn't respond to commands that are not broadcasted or specificaly
addressed to it.
 2021-01-15 10:57:20 -05:00
Beat Küng 26e8c231b0 v5x,v6x: move mtd_caldata after mtd_id partition 
to avoid losing factory calibration params on existing setups
 2021-01-15 10:57:20 -05:00
Lorenz Meier a282f3df8d CLI test: Disable by default on NuttX 
First target is to enable this for POSIX tests and then later to roll them out to NuttX.
 2021-01-15 10:57:20 -05:00
Lorenz Meier 03e9e10847 Add CLI tests for basic soak testing 
This is in no way a complete test suite but is intended as a starting point to get minimal
test coverage for CLI handling tests in. This is necessary to QA the CLI handling
(e.g. removal of commands) and to ensure that we are exercising these code paths in
stack check and alike tests.
 2021-01-15 10:57:20 -05:00
Julian Oes 5ae5c03c66 mavlink: handle param4/5 from mission_item_int 
It turns out that we did not properly handle param4 and param5 if they
are transferred using mission_item_int if the frame is
MAV_FRAME_MISSION.
 2021-01-15 10:57:20 -05:00
Beat Küng 12ebbd995d bmp388: wait a bit longer to schedule first cycle after reset 2021-01-15 10:57:20 -05:00
Beat Küng 529c3112ac bmp388: quiet if startup fails (no sensor on bus) 2021-01-15 10:57:20 -05:00
David Sidrane 1e7dfe227a stm32_common:board_hw_rev_ver Use Analog resistor detection 
When the VER_DRIVE and REV_DRIVE are the same GPIO
   we need to use Analog detection.
 2021-01-15 10:57:20 -05:00
Jakub Kákona b87dd317d4
airframes: add new airframe for ThunderFly TF-G2 autogyro (#16551) 
Co-authored-by: Roman Dvorak <romandvorak@mlab.cz>
 2021-01-15 13:54:17 +01:00
Thomas df41c99b61 make failsafe handling consistent over all VTOL types 2021-01-15 09:19:07 +03:00
Thomas 38e46ff341 Rename VtolAttitudeControl::abort_front_transition(const char *reason) to VtolAttitudeControl::quadchute(const char *reason) 2021-01-15 09:19:07 +03:00
Thomas Stauber 40fbfdc054 Undo make format change 
Co-authored-by: Matthias Grob <maetugr@gmail.com>
 2021-01-15 09:19:07 +03:00
Thomas 83ddb77a5f delete excess empty lines 2021-01-15 09:19:07 +03:00
Thomas b90fafd5cd Fix quadchute logic so that it also works during back transition 2021-01-15 09:19:07 +03:00
Daniel Agar 420ceb76fc cmake: NuttX generated vscode launch.json requires DEBUG_DEVICE found 2021-01-14 10:32:26 -05:00
SalimTerryLi 1ee98417f8
scumaker pilotpi updates 
* replace default mag with qmc5883l
* fix rotation and quiet startup
* fixedwing script & Multi-EKF cfg
* set default params only when initial startup
 2021-01-14 09:16:13 -05:00
Daniel Agar 52b07a932a github actions build and store cannode uavcan firmware 2021-01-14 08:52:38 -05:00
RomanBapst 96dfa7fc71 ROMFS: set cruise throttle correctly for all gazebo vtol configs 
Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2021-01-14 09:58:37 +03:00
Silvan Fuhrer 0633c3956f ROMFS: improve tuning of tailsitter VTOL SITL 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-01-14 09:58:37 +03:00
Silvan Fuhrer 6104fe8932 ROMFS: improve tuning of tiltrotor VTOL SITL 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-01-14 09:58:37 +03:00
Silvan Fuhrer 2ce310925c ROMFS: improve tuning of standard VTOL SITL 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-01-14 09:58:37 +03:00
Daniel Agar e96571b45d uavcannode: GPS working on cuav_can-gps-v1 
- use sensor_gps directly from sensor rather than vehicle_gps_position (aggregated value)
 2021-01-13 22:06:46 -05:00
Daniel Agar d8e8e23947 vscode: add cuav_can-gps-v1_canbootloader variant 2021-01-13 22:06:46 -05:00
Daniel Agar 58909b208d boards: cuav can-gps-v1 add safety button and LED 2021-01-13 22:06:46 -05:00
Daniel Agar a894ca30e8 cmake: add STM32F412CE debug helper 2021-01-13 22:06:46 -05:00
David Sidrane 529841ba7c make_can_boot_descriptor:Get padding math correct 2021-01-13 22:06:46 -05:00
David Sidrane 1ac70cc72f can-gps-v1:Correct Memory size used by app and bootloader size 2021-01-13 22:06:46 -05:00
David Sidrane d04216aa48 Nuttx with stmf412 fixes 2021-01-13 22:06:46 -05:00
David Sidrane 618bd5978a can-gps-v1:canbootloader SAFETY is GETNODEINFO_JUMPER 2021-01-13 22:06:46 -05:00
David Sidrane 2deef30d12 canbootloader:Add 48Mhz CAN Clock Settings 2021-01-13 22:06:46 -05:00
David Sidrane 177109a1af can-gps-v1:LED Trimming 2021-01-13 22:06:46 -05:00
David Sidrane 54abd997de canbootloader:Update to use NuttX 2021-01-13 22:06:46 -05:00
David Sidrane 271f87f8d2 canbootloader:Fixed Warning 2021-01-13 22:06:46 -05:00
David Sidrane 238c28d458 SK6812 Led driver 2021-01-13 22:06:46 -05:00
David Sidrane 85bd04f0c7 can-gps-v1:canbootloader Fixed 2021-01-13 22:06:46 -05:00
David Sidrane 3e08fd6682 can-gps-v1: Removed GPIO_CAN_CTRL 2021-01-13 22:06:46 -05:00
David Sidrane c2c92cb2c8 can-gps-v1: Added LED pin 2021-01-13 22:06:46 -05:00
David Sidrane cdae8bf168 can-gps-v1:Fixed Clock 2021-01-13 22:06:46 -05:00
Daniel Agar a0d8d5ac74 sensors/vehicle_gps_position: untangle and remove unnecessary state 2021-01-13 20:17:49 -05:00
Daniel Agar bc8ec5d1f5 uavcannode: support optical_flow 2021-01-13 19:35:28 -05:00