dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
1,645 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

710 Commits

Author SHA1 Message Date
Lorenz Meier bd3f3b1031 Sensor rate and throttle inversion fixes 2012-10-09 16:26:29 +02:00
px4dev a2ab5e8691 Don't treat end-of-document-structure as an error. 2012-10-08 22:37:18 -07:00
Doug Weibel 77e6375920 Change parameter names in FW control to fit within MAVLink parameter name size limit 2012-10-08 14:14:43 -06:00
Lorenz Meier 0edd4063af Merge branch 'master' of github.com:PX4/Firmware into tobi 2012-10-08 18:00:00 +02:00
Lorenz Meier dd50c88f07 Fixed GPS lost issue, fixed accel scale initialization, fixed code style in rate controller 2012-10-08 17:59:43 +02:00
Doug Weibel 4fea0a3fc1 This commit changes the inner loop control structures for fixed wing attitude control. Nested rate and angle loops are used with limits on both the rate setpoint 
A simple outer navigation loop is retained for navigation control.  This will be replaced later.  The pitch set point is hard coded to zero.  Pitch stabilization should work.

This commit compiles, but needs further testing.
 2012-10-07 14:50:07 -06:00
Doug Weibel 2bb1d17c7e Changes to the PID controller. Adds "limit" to the parameter set. Implements an output limit where the output magnitude is limited by the parameter value "limit". Also changes the integrator saturation such that the integrator is not updated (added to) if either updating it will cause the integrator values magnitude to exceed "intmax" or if the output magnitude would exceed "limit" with an updated integrator value. 
Arbitrary large limit values were hard coded into multirotor_attitude_control.c.  These should be changed to parametric values or something sensible.

This commit will temporarily break fixedwing_control.c.  A following commit will repair it along with significant changes to the inner loop control.

This commit has been tested to compile with fixedwing_control.c temporarily removed.  No other testing has been completed.
 2012-10-07 14:46:26 -06:00
px4dev 4c14e4f5f1 Add a 'secret' subcommand to bl_update that manipulates the option bits to change the brown-out detector configuration. 
This is an experiment to see if we can improve the boot-time behavior when powered off noisy supplies.
 2012-10-06 16:08:07 -07:00
patacongo 4d23437df0 Several bugfixes, mostly from Darcy Gong 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5217 42af7a65-404d-4744-a932-0658087f49c3
 2012-10-06 14:50:37 +00:00
patacongo eb041b927a Fix some W25 driver errors 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5212 42af7a65-404d-4744-a932-0658087f49c3
 2012-10-04 18:42:28 +00:00
patacongo 44a18f5361 Change all occurrences of CONFIG_EXAMPLE_ to CONFIG_EXAMPLES_ for consistency; fleshed out a few more Kconfig files 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5211 42af7a65-404d-4744-a932-0658087f49c3
 2012-10-04 17:36:07 +00:00
patacongo b0eb4f3cce Change order of includes in apps/Makefile; add clock frequencies to shenzhou, fire, and olimex-stm32 board.h files 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5210 42af7a65-404d-4744-a932-0658087f49c3
 2012-10-04 15:07:06 +00:00
Lorenz Meier 1318a0b954 Merge branch 'master' of https://github.com/tnaegeli/Firmware into tobi 2012-10-04 16:38:35 +02:00
Lorenz Meier 2fa0dec369 Back out testing changes that are a bit too much ahead of time for master 2012-10-04 16:38:11 +02:00
tnaegeli f292b03772 Merge branch 'master' of https://github.com/PX4/Firmware 2012-10-04 16:04:49 +02:00
tnaegeli 8dfa66cb97 Merge branch 'master' of https://github.com/PX4/Firmware 
Conflicts:
	apps/commander/commander.c
	apps/multirotor_att_control/multirotor_att_control_main.c
	apps/multirotor_att_control/multirotor_rate_control.c
 2012-10-04 16:01:42 +02:00
Lorenz Meier 67a2c8a173 Added controller parameters, added vicon position reading 2012-10-04 15:33:39 +02:00
Lorenz Meier 607e902b88 Cleaned up / simplified position control, attacking pos control implementation next 2012-10-04 14:50:34 +02:00
Lorenz Meier 2a06b66845 Fixed inner yaw rate loop 2012-10-04 10:56:55 +02:00
tnaegeli b9de72a8c9 Merge branch 'master' of https://github.com/PX4/Firmware 2012-10-04 09:29:46 +02:00
tnaegeli 733975ed2d fixed Rate controller 2012-10-04 09:28:04 +02:00
px4dev dfae108e6a Go back to the FIFO scheduler for now, as we don't have time to shake out the RR scheduler changeover just yet. 
Make the "default" scheduler a centralized definition so that changes are easier in future.
 2012-10-03 23:13:20 -07:00
patacongo e6656c077c Delete the apps/vsn directory (moved commands to apps/system) 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5209 42af7a65-404d-4744-a932-0658087f49c3
 2012-10-04 00:11:05 +00:00
patacongo 14b3f41aa6 Delete the apps/vsn directory (moved commands to apps/system) 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5208 42af7a65-404d-4744-a932-0658087f49c3
 2012-10-03 23:36:54 +00:00
Doug Weibel 067361e2d4 Just a test commit. No content other than a test comment. 2012-10-03 08:47:56 -06:00
tnaegeli 147c5bb664 Merge branch 'master' of https://github.com/PX4/Firmware 
Conflicts:
	apps/multirotor_att_control/multirotor_att_control_main.c
 2012-10-03 15:15:05 +02:00
tnaegeli f3cb2cf8a3 rate controller update 2012-10-03 15:05:50 +02:00
Lorenz Meier beca2b072e Moved from raw gyro to estimated angular rate from EKF for rate control 2012-10-03 15:02:47 +02:00
Lorenz Meier 053ce0e2f8 Exposed measurement noise covariance and process noise covariance as MAVLink parameters for attitude EKF 2012-10-03 14:45:55 +02:00
Lorenz Meier 921c391db4 Commit finished attitude estim cleanup 2012-10-03 14:00:04 +02:00
Lorenz Meier affa3af4e6 Clean 250 Hz updates in filter, partial updates enabled 2012-10-03 13:39:26 +02:00
Lorenz Meier 992a415ffc Merge branch 'master' of github.com:PX4/Firmware 2012-10-03 10:27:45 +02:00
Lorenz Meier b5d2ec3d92 Merge branch 'master' of github.com:PX4/Firmware 2012-10-02 22:28:22 +02:00
Lorenz Meier 7ef4655b0e Fixed HIL joystick support 2012-10-02 22:28:14 +02:00
Lorenz Meier a95aa1bbba Simplified pos estimator, ready for tests 2012-10-02 13:50:59 +02:00
Lorenz Meier 178462edcd Minor cleanups in debug output and offboard control arming 2012-10-02 13:02:57 +02:00
Lorenz Meier 5895a2e966 Updated update / telemetry rates, updated covariance 2012-10-02 10:41:46 +02:00
Lorenz Meier 9de6a81543 Updated EKF filter, fixed uploader (reverted to master) 2012-10-02 09:23:47 +02:00
Lorenz Meier d3e7b5e0bf Merge branch 'master' of https://github.com/tnaegeli/Firmware into task_spawn 2012-10-01 17:29:36 +02:00
tnaegeli e42655e7c6 EKF 2012-10-01 17:21:59 +02:00
px4dev 93c200d281 Add new 'task_spawn' interface for starting new tasks in the PX4 world 2012-10-01 00:02:38 -07:00
Lorenz Meier 6005077d54 Fixed typo 2012-09-29 22:06:30 +02:00
Lorenz Meier 6c4bddd996 Fixed a bug in HIL input 2012-09-29 22:04:00 +02:00
patacongo 253d3ab523 Prep for 6.22 Release 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5206 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-29 19:10:52 +00:00
Lorenz Meier 7949ac1ad8 Fixed heading calculation, fixed heading controller 2012-09-29 18:00:01 +02:00
patacongo de53b28fd3 Prep for NxWidgets 1.3 release 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5205 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-29 15:58:41 +00:00
Lorenz Meier 1725069c18 Merge branch 'update_rate' of https://github.com/sjwilks/Firmware into ardrone 2012-09-29 12:46:20 +02:00
patacongo 343817a6fd Turn off LCD reading on Shenzhou board (needs some TLC before it will be usable) 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5202 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-28 19:24:46 +00:00
Lorenz Meier fb691c9ff1 Fix a bug where under really adverse conditions the system id is not read before the first heartbeat is send out, resulting in an immediately timing out system in the GCS 2012-09-28 16:28:51 +02:00
Simon Wilks 4933d1dbbd Only provide update rate mod support to modes supporting 4 PWM channels 2012-09-28 08:37:24 +02:00
px4dev 78c2f99f85 Merge branch 'master' of https://github.com/PX4/Firmware 2012-09-27 19:50:20 -07:00
Simon Wilks 7a5ac6892e Support custom PWM update rates 
Rates of 50 to 400 can be specified using the -u <rate in hz> parameter
with the fmu command in the startup script.
 2012-09-27 23:36:56 +02:00
Julian Oes d206327541 Magnetometer calibration fixed 2012-09-27 18:43:04 +02:00
patacongo c3bc22f07c Definitions for ARMv7-M AIRCR register, Fixes for ADS7843 and SSD1289 driver, Missing build logic for examples/watchdog 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5198 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-27 15:29:53 +00:00
Julian Oes 2c5c314105 Cleanup of lots of debugging printfs 2012-09-27 17:08:29 +02:00
Julian Oes 7f15309892 Calibration should not freeze anymore, ardrone flying but estimator is not able to use calibrated magnetometer data 2012-09-27 16:50:20 +02:00
Julian Oes a05c4d0504 Merge branch 'ardrone' of https://github.com/PX4/Firmware into ardrone 
Conflicts:
	apps/ardrone_interface/ardrone_motor_control.c
 2012-09-27 13:44:47 +02:00
px4dev 62a4aa96b6 Merge branch 'master' of file:///Users/Shared/NuttX 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5197 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-27 00:18:03 -07:00
Lorenz Meier ec3949bf82 Fix a bug where the rate controller is always active 2012-09-26 22:25:39 +02:00
Lorenz Meier f93464e64f Fixed RC scaling in sensors app 2012-09-26 22:17:13 +02:00
Lorenz Meier d7456e61ff Fixed a max value in the AR.Drone interface 2012-09-26 22:16:57 +02:00
Lorenz Meier cbb1f1c9ed Fixed RC and offboard control state machine 2012-09-26 21:30:33 +02:00
Lorenz Meier 66aa281c07 Merge branch 'master' of github.com:PX4/Firmware into ardrone 2012-09-26 19:45:10 +02:00
Julian Oes ac43a67a0f ardrone max motor output was slightly to high 2012-09-26 14:29:47 +02:00
Julian Oes 201fdbc42c ardrone flying now (still workaround of disabled rates controller) 2012-09-26 10:11:57 +02:00
patacongo 731b466aca If server fails to create a thread because of lack-of-resources (EAGAIN), don't terminate. Keep serving... Memory may become available again later. From Kate. 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5191 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-25 22:47:11 +00:00
patacongo 2be7847efe Hook in NxWidgets configuration logic; Add a untested ADS7843E touchscreen support for the Shenzhou board; Complete the Shenzhou NxWM configuration (also untested). 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5190 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-25 22:04:51 +00:00
Julian Oes abbe998506 ardrone in the air again (workaround: rate controller disabled) 2012-09-25 21:35:02 +02:00
Julian Oes 0eae48d480 Merge remote-tracking branch 'upstream/ardrone' 2012-09-25 18:19:12 +02:00
Julian Oes 5c00ca343f forgot to remove printfs of magnetometer calibration 2012-09-25 16:39:15 +02:00
Julian Oes 6b0ed71ae0 Simplified magnetometer calibration routine 2012-09-25 16:36:33 +02:00
Julian Oes e217540e01 write all params to EEPROM for now (workaround to prevent standard values being written) 2012-09-25 10:51:13 +02:00
Julian Oes 268874fdb7 auto save after calibration (however the rest is reset to stock) 2012-09-25 10:31:19 +02:00
Julian Oes b5ec9c50f2 fix to set device for ardrone interface 2012-09-24 17:47:06 +02:00
Lorenz Meier 705172d302 Untested, but fully implemented attitude and/or inner rate control 2012-09-23 12:11:46 +02:00
Lorenz Meier de530d6ba1 General robustness improvements in PID struct, numerically close to bullet-proof, error reporting needs improvements still. 2012-09-23 01:20:41 +02:00
patacongo b58026b8f0 Add missing STM32 F1 pin remapping definitions 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5180 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-22 22:25:21 +00:00
patacongo 5b51b5e3a4 hpttd.h needs to include stdbool.h 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5179 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-22 20:38:43 +00:00
patacongo c9bb9dd995 Adds support for keep-alive connections to webserver 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5178 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-22 20:36:36 +00:00
Lorenz Meier 8b951ec417 WIP on HIL 2012-09-22 20:55:44 +02:00
Lorenz Meier a9b21886f3 Halfway-working fixed wing waypoint control, needs more effort 2012-09-22 18:46:04 +02:00
patacongo 1b7786e0e2 More webserver updates from Kate 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5173 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-22 12:23:35 +00:00
patacongo 4edf18b009 Add support for Fire STM32v3; sscanf fixes from Kate 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5168 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-21 17:32:30 +00:00
Lorenz Meier a56b4ffe26 Enabled mag updates again 2012-09-21 19:17:22 +02:00
Lorenz Meier 6c7e21bd1c Debugging output still enabled, fixed a number of additional issues 2012-09-21 19:14:50 +02:00
Lorenz Meier 1d96f0b853 Fixed stupid interface bugs, working 2012-09-21 17:19:28 +02:00
Lorenz Meier 8a11f76994 Updated C files for attitude estimator 2012-09-21 14:42:57 +02:00
Lorenz Meier eaa431e5ce Merge branch 'master' of github.com:PX4/Firmware into ardrone 2012-09-21 13:15:46 +02:00
Lorenz Meier 082074f991 Completely implemented offboard control 2012-09-21 12:55:41 +02:00
Lorenz Meier eaa6d0d4f2 Merge pull request #30 from julianoes/gps_fix 
some gps fixes (only tested without gps attached)
 2012-09-20 15:35:21 -07:00
Julian Oes d7085ba9e3 forgot to remove some rprintfs 2012-09-20 13:09:32 +02:00
Julian Oes df8bbb2d30 workaround in nuttx to allow for more than 6 arguments when starting an app (in my opinion needed) 2012-09-20 11:57:29 +02:00
Julian Oes e7241fb37f gps starting and stopping should be working correctly now, ubx not continuing whith configuring should be fixed 2012-09-20 11:56:30 +02:00
px4dev 42f040ab66 Merge from upstream NuttX 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5166 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-19 23:29:14 -07:00
Julian Oes 71b37a859c the gps_thread_should_exit flag is now static again, hope it works like this 2012-09-20 08:17:01 +02:00
Lorenz Meier 572efc3383 Fixes and style, deamonized filter 2012-09-19 22:48:57 +02:00
Lorenz Meier dbd6cbea60 Minor cleanups, correct sensor scaling 2012-09-19 22:43:00 +02:00
Lorenz Meier efcf146b6d Updated EKF filter, untested 2012-09-19 22:36:41 +02:00
Julian Oes f707a2ce60 fixed stacktrace which happened in configure_gps_ubx(int *fd) because of faulty file descriptor argument, added possibility to stop gps daemon (only tested without gps attached) 2012-09-19 22:28:13 +02:00
Lorenz Meier 291f4f3a33 Reworked control interface, needs testing / validation 2012-09-19 18:53:29 +02:00
Lorenz Meier 855fbe8543 Minor style and documentation cleanups 2012-09-19 07:42:32 +02:00
Lorenz Meier c0cc180876 Minor cleanups in fixed wing control 2012-09-19 07:42:05 +02:00
patacongo e592dcedf2 webserver update from Kate 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5164 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-18 23:31:35 +00:00
patacongo e9474a7707 Add default file name if URL is a directory, giving index.html behavior. From Kate 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5162 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-18 18:45:39 +00:00
patacongo 7d318ee113 Cosmetic updates to the ENC28J60 driver 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5161 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-18 18:32:31 +00:00
Lorenz Meier b0b72b11eb Reworking control infrastructure for inner rate loop, preparing offboard interface 2012-09-18 18:28:49 +02:00
patacongo 294e1a2df9 Fix ording of bytes in ENC28J60 MAC address; Web server refactoring from Kate 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5159 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-18 12:34:43 +00:00
tnaegeli df03433034 g 
Signed-off-by: tnaegeli <naegelit@student.ethz.ch>
 2012-09-18 13:49:18 +02:00
patacongo c3c602f93e Fix ENC28J60 Tx transmit (still a receive problem); Add HTTP 408 logic from Kate 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5158 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-17 23:02:58 +00:00
patacongo 77b8e554f8 Add option for single connection web server. From Kate. 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5157 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-17 19:44:53 +00:00
patacongo 57623d42eb Resync new repository with old repo r5166 
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5153 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-17 18:18:44 +00:00
Lorenz Meier 3816327977 SD log WIP, currently logs everything to one packet 2012-09-17 11:51:33 +02:00
Lorenz Meier 7a375ad670 Merge branch 'master' of github.com:PX4/Firmware into ardrone_tuning 2012-09-17 10:13:20 +02:00
Lorenz Meier f5dea9a1a5 Debugging / fixing attitude aliasing 2012-09-17 10:13:15 +02:00
px4dev 44adaa736c A system command that knows how to reflash the bootloader on the PX4FMU. 2012-09-16 23:41:26 -07:00
px4dev 22537447db Adjust to changes in the work queue API. 2012-09-14 22:59:42 -07:00
px4dev a3f21d9140 Merge branch 'NuttX/master' 2012-09-14 21:33:19 -07:00
px4dev 53fe61a621 Fix gyro/mag parameter names in calibration routines. 
Thanks to AngeloDP for spotting this.
 2012-09-14 20:15:29 -07:00
patacongo cfa24e37d6 Some ENC28J60-related fixes 
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5154 7fd9a85b-ad96-42d3-883c-3090e2eb8679
 2012-09-14 21:48:07 +00:00
Lorenz Meier e5950ad498 Improved reporting / logging a lot, first usable version of SD card logger 2012-09-14 17:52:24 +02:00
patacongo cc0c42dd31 Add XML RPC server plus NXWM build fixes from Max Holtzberg 
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5150 7fd9a85b-ad96-42d3-883c-3090e2eb8679
 2012-09-14 14:07:21 +00:00
Lorenz Meier a8fcd4a49c Merge branch 'master' of github.com:PX4/Firmware 2012-09-14 10:26:05 +02:00
Lorenz Meier 3a18a79bd5 Better log rate balancing 2012-09-14 10:25:59 +02:00
Lorenz Meier 5dd6cbcb13 Logging rate changes, 2012-09-14 10:24:49 +02:00
px4dev d7fb2175eb A simple file write performance test 2012-09-13 21:42:51 -07:00
Lorenz Meier a294ee2b87 Fixed mavlink timestamps, fixed SD logger, ready for flight tests 2012-09-13 23:35:20 +02:00
patacongo 0fb57027de Changes needed for clean ez80 compile with ZDS toolchain 
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5147 7fd9a85b-ad96-42d3-883c-3090e2eb8679
 2012-09-13 19:33:47 +00:00
patacongo 2aa4af7139 Remove executable property from source and make files 
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5146 7fd9a85b-ad96-42d3-883c-3090e2eb8679
 2012-09-13 18:46:10 +00:00
patacongo 77888ea156 Email address change in apps/ 
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5143 7fd9a85b-ad96-42d3-883c-3090e2eb8679
 2012-09-13 16:58:49 +00:00
patacongo f6ca2227e3 USB device drivers: Add hooks to to use common, external DMA buffer allocation implementation.. 
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5142 7fd9a85b-ad96-42d3-883c-3090e2eb8679
 2012-09-13 14:14:18 +00:00
patacongo a033a25dbf Rename all apps/examples/-/main.c to something unique 
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5141 7fd9a85b-ad96-42d3-883c-3090e2eb8679
 2012-09-13 12:36:32 +00:00
Lorenz Meier e20c2541c6 Send back fake RC in HIL if getting joystick inputs 2012-09-13 00:24:00 +02:00
patacongo a444b0ebc4 Suppress network configuration in discover example if it is an NSH built-in functin 
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5139 7fd9a85b-ad96-42d3-883c-3090e2eb8679
 2012-09-12 21:42:36 +00:00
patacongo 093ccf2015 Add UDP discovery configuration for the STM3240G-EVAL (from Max Holtzberg) 
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5138 7fd9a85b-ad96-42d3-883c-3090e2eb8679
 2012-09-12 20:14:46 +00:00
patacongo 4e8030a11a Network discover utility from Max Holtzberg 
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5137 7fd9a85b-ad96-42d3-883c-3090e2eb8679
 2012-09-12 18:42:07 +00:00
Lorenz Meier 47c96d3d12 Quite flyable state 2012-09-12 18:50:24 +02:00
Lorenz Meier e4c3a44751 Fixed index in loading 2012-09-12 17:55:22 +02:00
Lorenz Meier ffceb37803 Committing WIP 2012-09-12 17:46:15 +02:00
Lorenz Meier 3536ad8010 Merge branch 'rc_cleanup' of github.com:PX4/Firmware into gps 2012-09-12 17:39:02 +02:00
Lorenz Meier 59bd9ae92b Re-enabled scaling for roll 2012-09-12 17:38:23 +02:00
px4dev 59b1402379 Compute the channel bound once before the loop runs. 2012-09-12 08:37:05 -07:00
Lorenz Meier c815aff842 Deamonized GPS app, fixed GPS issues, reworking RC input 2012-09-12 17:22:24 +02:00
Lorenz Meier 31ecc4d5df Working on correct RC outputs without magic numbers 2012-09-12 11:20:33 +02:00
Lorenz Meier cb57fdb28c Added ground estimator, fixed RC calibration 2012-09-12 10:34:49 +02:00
Lorenz Meier b7c8b7d9f1 fixed up RC inputs, removed magic numbers, added dead zones, needs testing 2012-09-12 00:26:55 +02:00
Lorenz Meier b573804456 Got rid of a bunch of magic numbers, manual controls can now be set up fine-grained 2012-09-11 23:54:26 +02:00
Lorenz Meier a74a455ab5 Fixed calibration routines to ignore previous offsets during calibration, added scale compensation for MPU-6000 2012-09-11 23:35:01 +02:00
patacongo 648420e67a Add support for DMA memory allocator to FAT file system 
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5127 7fd9a85b-ad96-42d3-883c-3090e2eb8679
 2012-09-11 13:53:44 +00:00
patacongo de7764b1d4 AVR corrections from Richard Cochran; uIP webserver enhancements from Kate 
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5126 7fd9a85b-ad96-42d3-883c-3090e2eb8679
 2012-09-11 13:19:59 +00:00
patacongo c7a2544230 The M3 Wildfire port is code complete and ready for test 
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5125 7fd9a85b-ad96-42d3-883c-3090e2eb8679
 2012-09-10 22:26:37 +00:00