dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
19,008 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

19008 Commits

Author SHA1 Message Date
Julian Oes 2bf40efe8b RPi2: fuse mainapp/common and navio2 
We currently only support Navio2, so let's fuse the two configurations.
 2016-07-16 15:51:00 +01:00
Miguel Arroyo 17be06cf1a Fixes Navio2 Config Typo 2016-07-16 15:51:00 +01:00
Julian Oes 1939b88a33 RPi2: use cross/native instead of release/default 2016-07-16 15:51:00 +01:00
Julian Oes f241518d0e RPi2: bring default and release cmake in sync 
The two cmake files for default and release where out of
sync. This change bases them on a common cmake file.
 2016-07-16 15:51:00 +01:00
Daniel Agar d733fc9139 travis-ci use tagged docker image (#5068) 2016-07-16 08:41:19 -04:00
Beat Küng a1b710025b Improve new logger update rate (#5073) 
* logger: disable some default topics, which are most likely not used

This is also to safe CPU and lower the amount of file descriptors used.

* logger: use the hrt timer for more accurate scheduling

Under NuttX with the default rate of 285Hz, the actual measured rate was
only 200Hz while on Linux it was ~280Hz. The reason is that NuttX only
uses a usleep() granularity of 1ms, so that the typical sleep time is
longer than what we set.

Now the logger waits on a semaphore, which gets activated periodically
with a hrt timer. With this the measured rate is exactly the expected one,
285Hz.
 2016-07-15 16:55:32 -07:00
Beat Küng ee58f0d11d encoders.msg: remove this topic, it's never published (#5074) 2016-07-15 14:59:52 -07:00
lovettchris b48c081e5c Reset _transfer_in_progress if mavlink transfer times out. (#5077) 2016-07-15 14:59:30 -07:00
Julian Oes 87e964ec10 commander: POSCTL with localpos for MC 
Fixedwings need a global position estimate for POSCTL.
 2016-07-15 14:43:36 +01:00
Julian Oes f430c39f5b commander: allow POSCTL with local position 
We want to allow flying POSCTL with optical flow only without GPS.
 2016-07-15 14:43:36 +01:00
Julian Oes 1cfa429efe DriverFramework: update submodule 
Small additions for Intel Edison.
 2016-07-15 12:58:10 +02:00
David Sidrane 33e4f38d82 Add GPS and Compass (#5066) 2016-07-14 08:26:40 -10:00
David Sidrane e2a6ae676f More complete IO init (#5065) 2016-07-14 07:32:11 -10:00
Beat Küng 4a199c1360 gyro calibration: avoid double initialization of gyro_scale data 
They're initialized in do_gyro_calibration already
 2016-07-14 14:17:38 +02:00
Julian Oes f1b8bed5df gyro_calibration: set scale to 1 instead of 0 2016-07-14 13:13:56 +02:00
David Sidrane 8a2df2a458 Avoid unnecessary Write Cycle 2016-07-13 20:42:05 +02:00
David Sidrane 5d1bd6fb2c TAP used FLASH Based parameter storage - needs timing eval 2016-07-13 20:42:05 +02:00
David Sidrane 8d13dba0cc Update NuttX with backport of stm32 FLASH driver to support F4 ==master_flash 2016-07-13 20:42:05 +02:00
David Sidrane 5e8d6375c9 Back Port nuttx_v3 FLASH based parameter hooks 2016-07-13 20:42:05 +02:00
David Sidrane 39ce201efe TAP:Fix build to use correct ROMFS 2016-07-13 20:19:05 +02:00
David Sidrane 78bc7d850b Fix Syntax error - but I suspect the USE_IO logic can be simplified 2016-07-13 07:52:58 -10:00
Julian Oes 3ed8b735c2 mavlink: only warn once if broadcast fails 
This fixes the issue where the console was spammed if a broadcast failed
after a connection had previously been established.
 2016-07-13 19:40:59 +02:00
Beat Küng 399d4ef833 sensors: only poll on first gyro for now 
This fixes a bug with following setup:
- two (or N > 1) connected gyros
- ekf2 enabled
In this case, sensors would publish with the combined rate of the gyros,
but with N following messages having the same gyro data & timestamp.
Apparently ekf2 cannot handle this, the other estimators can.

We may want to rethink what the proper solution is here.
 2016-07-13 14:35:03 +02:00
Julian Oes eda2915f0b mavlink: whitespace fix 2016-07-13 10:10:45 +02:00
Julian Oes d9343fa925 mavlink: use new copy_if_updated interface 2016-07-13 10:10:45 +02:00
Julian Oes 8345a0368b mavlink: add function to copy only if updated 
The MavlinkOrbSubscription only had an interface to either always copy
or copy based on a timestamp. This commit adds a copy interface if the
topic has been updated.
 2016-07-13 10:10:45 +02:00
Julian Oes 8ded6a58ab mavlink_log: enable queueing 
We don't want to drop messages if possible for mavlink log messages, so
let's use the orb queueing.
 2016-07-13 10:10:45 +02:00
Julian Oes 314ee6b7e0 commander: remove some if confusion 
This is a try to simplify the if statements a bit. Also, a check of
new_arming_state which was impossible, is removed.
 2016-07-13 10:10:45 +02:00
Julian Oes 631ce1fc55 commander: proper arguments for preflight check 2016-07-13 10:10:45 +02:00
Andreas Antener af8cd3f880 correctly scale and trim outputs in IO 2016-07-13 09:29:13 +02:00
Roman 13905c2480 px4io driver: send roll, pitch and yaw scale parameter values to io 
Signed-off-by: Roman <bapstr@ethz.ch>
 2016-07-13 09:29:12 +02:00
Roman 08bbd6dbfa px4iofirmware: added scale parameters for roll, pitch and yaw 
since pure manual control for fixed wings in handled on the io side
the scale parameters for roll, pitch and yaw had to be introduced there
as well.

Signed-off-by: Roman <bapstr@ethz.ch>
 2016-07-13 09:29:12 +02:00
tumbili 71e2a43790 consider scale parameters in rc calibration code 2016-07-13 09:29:12 +02:00
tumbili f0dd5a103c allow scaling controls in full manual mode for fixed wings 2016-07-13 09:29:12 +02:00
tumbili 784883af22 added parameters to allow scaling controls in full manual mode 
for fixed wings
 2016-07-13 09:29:12 +02:00
xiaoyuli 7718343b27 fix the function of disabling safety switch (#5031) 2016-07-12 23:43:17 +02:00
Daniel Agar de14418e93 fw_pos_ctrl_l1 var naming consistency and effc++ 2016-07-12 23:40:39 +02:00
Daniel Agar ebce725720 px4fmu-v2 disable motor_ramp 2016-07-12 23:36:05 +02:00
Daniel Agar 59b4350aa0 implement MAV_CMD_NAV_LOITER_TO_ALT and general mission cleanup 2016-07-12 23:36:05 +02:00
Lorenz Meier 7419151314 Update EKF2 replay timestamp handling 2016-07-12 22:17:22 +02:00
David Sidrane 0576031a81 TAP PID (#5036) 2016-07-12 05:07:03 -10:00
Beat Küng f8382a2713 upload scripts: add TAP for the uploader script 2016-07-12 16:00:33 +02:00
David Sidrane 5cc58fa067 Reserving 32Kib of FLASH for parameters (#5035) 2016-07-12 03:57:31 -10:00
James Goppert 817f695297 Change to LPE terrain model to account for velocity scaling. (#5027) 2016-07-11 16:02:39 -04:00
Lorenz Meier a740d80a20 Mag voter: Be more forgiving on load changes 2016-07-11 15:16:35 +02:00
Lorenz Meier 021f0840ae Fix Hobbyking Pixracers 2016-07-11 15:03:07 +02:00
tommises 4fa2c54485 Mocap timestamp cleanup (#5021) 2016-07-11 12:46:29 +02:00
Beat Küng c9652fd42a logger: update set of default topics to match functionality of sdlog2 
logging rate with these topics: ~50KB/s

The rates may need to be adjusted
 2016-07-11 10:04:44 +02:00
Beat Küng 4ec9e53deb param SYS_LOGGER: remove experimental for new logger 
It's ready to be used!
 2016-07-11 10:03:02 +02:00
Beat Küng 68e14ceb29 tap startup script: add -t param for logger 2016-07-11 10:01:16 +02:00