Commit Graph

2395 Commits

Author SHA1 Message Date
Daniel Agar 9c15be22d6 mc_autotune_attitude_control: add new MC_AT_EN parameter to enable
- only enabled by default on boards that aren't memory constrained
2021-11-05 09:52:07 -04:00
Jaeyoung-Lim 5dcaadf492 Fix px4vision defaults 2021-10-25 16:29:52 -04:00
bresch 55f0860c31 fw atune: add fixed-wing auto-tuning module 2021-10-25 13:41:31 +02:00
Thomas Debrunner f4a85fa951 rcS: Allow startup files to be located on SD card 2021-10-19 14:08:38 -04:00
mcsauder 21163d859e Whitespace cleanup. 2021-10-19 13:29:26 -04:00
Daniel Agar b08f20806b ROMFS: rcS don't play startup tune until after UAVCAN and px4io
- fixes potential duplicate startup tune
2021-10-18 21:37:09 -04:00
Beat Küng e36a8f3765 ROMFS: disable vtol airframes for kakutef7 2021-10-18 18:45:19 -04:00
Beat Küng ab1d76ae7d params: use PWM_MAIN_* instead of PWM_FMU_* 2021-10-18 18:45:19 -04:00
Beat Küng 838ec5d485 airframes: set output function params for ctrlalloc airframes 2021-10-18 18:45:19 -04:00
Beat Küng a01cf2efc0 rc.mc_apps: allow to set COM_PREARM_MODE with control allocation
This is safe now.
2021-10-18 18:45:19 -04:00
Beat Küng c1e5e666f0 pwm_out, dshot: add dynamic mixing support 2021-10-18 18:45:19 -04:00
Beat Küng 38fa65a47e control_allocator: remove direct mixer, add actuator_{motors,servos} instead 2021-10-18 18:45:19 -04:00
Beat Küng a51c465b54 control allocation: introduce parameter SYS_CTRL_ALLOC & unify build targets 2021-10-18 18:45:19 -04:00
mcsauder a732ddaefb Deprecate 4250_teal from CMakeLists.txt. 2021-10-13 17:25:18 -04:00
mcsauder c1b0d78077 Minimize flash by migrating MIXER quad_x and PWM_OUT 1234 to rc.mc_defaults. Deprecate 4250_teal config file. 2021-10-13 17:25:18 -04:00
Jaeyoung-Lim e2f048f608 Add sitl glider model
Add airframe configs for SITL glider model

This commit adds an airframe config for a glider model
2021-10-10 12:33:25 -04:00
bresch d1a2d6e1aa h480_ctrlalloc: tune rate controller 2021-10-08 09:35:40 +02:00
bresch 21b1f090e6 SITL: add typhoon_h480_ctrlalloc target 2021-10-08 09:35:40 +02:00
bresch b18b7e84d2 CA pseudo-inverse: normalize control allocation matrix 2021-10-08 09:35:40 +02:00
bresch 212df95193 ctrlalloc: use normal rate controller 2021-10-08 09:35:40 +02:00
Silvan Fuhrer fb8bf7eaa6 ROMFS: remove default params from configs
Remove params from airframe configs that are just set again
to the param default value or to the value that is
specified in the mc_default, fw_default or vtol_default.

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2021-10-07 09:22:59 -04:00
Daniel Agar 6d78054f50
mavlink USB auto start/stop on boards with VBUS
- no longer start sercon or mavlink usb by default
 - on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns
 - the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected
 - skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards
2021-10-03 15:32:54 -04:00
bresch 1443f773da mbe: add module to targets 2021-10-02 21:25:21 -04:00
bresch cd61065aea sitl: start MC autotune module 2021-10-02 18:12:05 -04:00
bresch 76615f8df3 VTOL: set HTE horizontal speed sensitivity threshold low 2021-09-25 20:07:28 -04:00
Daniel Agar 089c962d92 px4io: moving mixing to FMU side
Using mixers on the IO side had a remote benefit of being able to
override all control surfaces with a radio remote on a fixed wing.
This ended up not being used that much and since the original design
10 years ago (2011) we have been able to convince ourselves that the
overall system stability is at a level where this marginal benefit,
which is not present on multicopters, is not worth the hazzle.

Co-authored-by: Beat Küng <beat-kueng@gmx.net>
Co-authored-by: Daniel Agar <daniel@agar.ca>
2021-09-25 19:15:05 -04:00
Beat Küng 5b674ea831 ROMFS: remove some airframes and mixers on v2 to reduce flash 2021-09-11 14:08:41 -04:00
Beat Küng 1ee423e3c8 pwm_out, dshot: remove mode_* handling and capture ioctl's
They now use all unused pins, whereas camera_capture, camera_trigger and
pwm_input modules start before to reserve their pins.
2021-09-08 16:10:24 -04:00
Daniel Agar 000765e9f0 NuttX mount procfs and binfs in px4 init 2021-09-08 10:21:24 -04:00
Daniel Agar 40e5477edb NuttX boards fix mkfatfs and rcS logic 2021-09-01 15:16:00 -04:00
David Sidrane 1618933014 rcS:Scope netman to all 5X and 6X 2021-08-20 10:15:57 -04:00
David Sidrane 8952fa2935 rc.sensors:Fix Shell Check warning 2021-08-13 14:22:00 -04:00
Daniel Agar 3f172dbfa7 ROMFS: new parameters for starting differential pressure sensors 2021-08-12 10:11:13 -04:00
TSC21 a930edf34b init.d-posix: rcS: allow to use a different startup config to the micrortps_client in UDP 2021-08-12 08:44:53 +02:00
Daniel Agar 326c4f95ce ROMFS cmake remove directory VERBATIM 2021-08-11 13:29:14 -04:00
Daniel Agar c8366e736e ROMFS: update ATL Mantis EDU optical flow defaults 2021-08-08 14:21:28 -04:00
romain-chiap 718e5b5b5d
sih: add fixed-wing support 2021-08-05 09:16:14 +02:00
Daniel Agar be2f65be35 drives/tap_esc: refactor to use OutputModuleInterface 2021-08-04 17:15:24 -04:00
Daniel Agar e900f2ea54 boards: Advanced Technology Labs (ATL) Mantis EDU support and airfarme (SYS_AUTOSTART 4061)
Co-authored-by: Julian Oes <julian@oes.ch>
Co-authored-by: Daniel Agar <daniel@agar.ca>
2021-08-04 17:15:24 -04:00
Beat Küng b9e2d2c0f2 4100_tiltquadrotor: remove LED_RGB_MAXBRT 2021-08-03 10:36:25 +02:00
Beat Küng 95789252d0 airframes: minor param cleanups (remove commented 'param set') 2021-08-03 10:36:25 +02:00
Hyungsub 1e2877cedf Tune down solo roll rate controller 2021-08-02 07:51:13 +02:00
Daniel Agar e84c6664bb ROMFS: update airframes/4901_crazyflie21 legacy battery parameter 2021-07-23 19:58:38 -04:00
Daniel Agar 6f4111e073 ROMFS: update airframes/17003_TF-G2 legacy battery parameter 2021-07-23 19:58:38 -04:00
Blake McHale 4a436f1ac9 Add missing receive port arg to micrortps_client start 2021-07-13 21:42:10 -04:00
Daniel Agar ad11927661 ROMFS: delete redundant wing mixers
- these are nearly identical with slightly different scaling and haven't been tested for years
2021-07-13 21:12:11 +02:00
Daniel Agar 3924f0ef30 ROMFS: delete Hobbyking Micro PCB 2021-07-13 14:07:45 -04:00
Jaeyoung-Lim db1dc1c9a1 Add airframe configuration and make target for believer
This commit adds an airframe configuration and make target for believer
2021-07-13 18:04:52 +02:00
Daniel Agar d8704cee67 platforms: px4 log build string then print (fputs) 2021-07-10 13:14:49 -04:00
Daniel Agar c5b1fe86ca delete deprecated BAT_* parameters 2021-07-08 22:19:12 -04:00