- in a lot of cases this won't really matter, although you can see it in logs (especially with things like vehicle_at_rest), but it's something we might as well do properly
Co-authored-by: Mathieu Bresciani <brescianimathieu@gmail.com>
Fixes a regression from 8bae4e5c0e, where
the orbit flight task wasn't an extra task (flight_tasks_to_add) anymore
and therefore the command handling wasn't generated.
There was a race condition that could cause several outcomes. The most severe
was that flight_mode_manager gets the command, switches to orbit and then
in the next iteration switches back because commander did not change
nav_state yet. When commander then switches, flight_mode_manager would still
be in the old mode.
This is prevented by storing the command (allowing it to arrive before or
after mode switch), and then apply it after the switch happens.
- vehicle_angular_velocity and vehicle_angular_acceleration are produced together from the same input data, consumed together, and share the the same metadata (timestamps)
- individually these topics each have 16 bytes of metadata (2 timestamps) for 12 bytes of data (x,y,z float32)
During the whole flight, if the difference between the yaw estimate from
EKF2 and the emergency estimator is large and that the GNSS velocity
fusion is failing continuously, immediately reset to the emergency yaw
estimate.
- with Ekf::initialiseFilter() resetting _time_last_hagl_fuse the terrain estimate was technically valid regardless of any range or flow data availability and as a result optical flow fusion is able to start and stay active
- only consider terrain estimate valid based on control status flags and recent fusion
The CameraFeedback module used only the vehicle attitude for the camera orientation so far. With this change, the gimbal_device_attitude_status is used to compute the global camera orientation when a gimbal is used.
In this case it did not cause any problems.
Fixes a compiler warning:
/src/modules/commander/HealthAndArmingChecks/HealthAndArmingChecks.cpp:39:21: error: member ‘HealthAndArmingChecks::_failsafe_flags’ is used uninitialized [-Werror=uninitialized]
39 | _reporter(_failsafe_flags)
| ^~~~~~~~~~~~~~~
* simulator_mavlink: Add basic vio failure injection
Signed-off-by: Paul Frivold <paul@kefrobotics.com>
* simulator_mavlink: Rm failure not supported warning
Failures commands are also handled in other files,
so warning here could be confusing.
Signed-off-by: Paul Frivold <paul@kefrobotics.com>
Signed-off-by: Paul Frivold <paul@kefrobotics.com>
previous change in logic to hold after mission clear also broke rtl, as non-mission takeoff still published a mission result which allowed entering the mission finished condition and always changing state to loiter (ignoring rtl). new logic only switches navigation states if mission is finish and the nav state is explicitly in takeoff state, or in mission state
The srcparser.py is specific to each use case (e.g. Airframes, Parameters, px4events, etc as in Tool/* folders).
Therefore it is confusing to have the px_process_airframes.py script handle concept of airframes under the generic name 'params'.
This improves readability and sets the baseground for implementing more specific vehicle type supports, as mentioned in https://github.com/PX4/PX4-user_guide/pull/1858#discussion_r876554728
once the rampup starts. The rampup requires a valid vertical velocity setpoint.
The corner case is:
- We are before takeoff and amending the setpoint to be 0,0,100 acceleration
in order to idle
- The rampup starts BUT the setpoint is not yet overwritten by the trajectory
setpoint topic
- The idle setpoint gets amended to not contain a feed-forward vertical
acceleration because the rampup is velocity based
- The result is a brief invalid 0,0,NAN acceleration setpoint
- That invalid setpoint gets overridden by a failsafe that holds zero velocity
- Zero velocity leads to applying ~hover thrust briefly
- buffer at least 2 samples for the IMU output predictor buffers
- dropping below 2 becomes problematic for the minimum observation
interval calculation and the vertical output buffer trapezoidal
integration
- sitl_gazebo in PX4/Firmware (0e2b1ee979): 56b5508b72
- sitl_gazebo current upstream: b38e701ec4
- Changes: 56b5508b72...b38e701ec4
b38e701 2022-11-03 frederictaillandier - adding jinja parameters
cc8f33d 2022-11-03 frederictaillandier - allowing to override the streaming gimbal ip and port
6c3f1f8 2022-11-03 alessandro - send orientation q with landing_target message (#919)
48e764b 2022-11-02 Frederic Taillandier - allowing to override the video stream ip in a simpler way than using the jinja file (#923)
bresch
Daniel Agar
Beat Küng
GaspardBesacier
Silvan Fuhrer
Matthias Grob
alexklimaj
Michael Schaeuble
Paul Erik Frivold
Igor Mišić
batinkov
Zachary Lowell
Thomas Stastny
Junwoo Hwang
Damien SIX
Daniel Mesham
Basti
PX4 BuildBot
Hamish Willee
tanja
Chris Seto