dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
35,194 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

87 Commits

Author SHA1 Message Date
Daniel Agar 6874e9fba0 boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default 
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
 2021-03-30 09:23:43 -04:00
Daniel Agar 631d1647d3 boards: minimize unnecessary differences in default variants 2021-03-28 14:46:47 -04:00
Daniel Agar f8eaa6e46b ROMFS handle bl_update generically 
- include all available legacy bootloaders
 2021-03-11 00:38:18 +01:00
Daniel Agar 4d288512b5 add board architecture specific init defaults 2021-03-09 19:59:41 +01:00
Daniel Agar 19de1e57e3 gyro_fft promote to modules and include on all boards 2021-03-05 10:56:54 -05:00
Daniel Agar ab0d0fd0be
uORB move to PX4 platform layer 2021-02-17 11:25:56 -05:00
Daniel Agar a257120e8d boards: use new param default mechanism 2021-02-12 08:27:47 -05:00
Daniel Agar 8f0918a16b boards: remove unused linker __param section 2021-02-08 23:22:48 -05:00
Daniel Agar 41b0f83c0c
drivers/magnetometer: Bosch BMM150 rewrite 
- same pattern as other new drivers (state machine, checked register mechanism, no sleeps, etc)
 - self test has been rolled into regular startup sequence
 - still I2C only, but will be expanded in the future
 - configure to high accuracy preset
 2021-02-06 12:50:23 -05:00
Daniel Agar 78dff6adcb boards: add CONSTRAINED_MEMORY build option 
- currently the main change is that it reduces the max number of ORB multi instances to 4, but usage will be expanded as needed
 - limits number of EKF2 multi instances to 2.
 - enabled on all cortex m4 boards
 2021-02-01 08:56:22 +01:00
Daniel Agar 1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573) 
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
 2021-01-17 22:40:21 -05:00
Daniel Agar cb74cb8692 boards: enable CONFIG_ARMV7M_LAZYFPU everywhere 2021-01-12 09:04:38 +01:00
Matthias Grob 7545249215 Add flight_mode_manager to all targets with mc_pos_control 2020-12-30 10:25:08 -05:00
David Sidrane 22bc176885 Added mft for queries 2020-12-02 20:40:23 -05:00
David Sidrane f8148593ad uvify_core: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
Daniel Agar c60743b306 boards: NuttX increase file name max 32 -> 40 2020-11-08 12:51:59 -05:00
Daniel Agar 233949a377 NuttX upgrade to 10.0.0+ defconfig changes 2020-10-28 14:25:25 -04:00
Tanja Baumann b5ebdb8e41
add system command to get and set system time 
* add system_time command for all boards
 2020-09-26 13:09:01 -04:00
David Sidrane c5f479dac7 uvify_core: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane 97c17d5d4a uvify_core Updates for NuttX 9.1.0- 
uvify_core: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
SalimTerryLi c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc 2020-09-07 23:09:20 -04:00
Daniel Agar 7569722821
iSentek IST8310 magnetometer rewrite 
- simple state machine to reset, configure, etc
 - checked register mechanism (sensor will reset itself on configuration error)
 - configured in 16 bit mode (1320 LSB/Gauss instead of 330 LSB/Gauss)
 - adjusted orientation handling in driver to match datasheet as closely as possible
     - in many external compass units the rotation was wrong and very difficult to actual determine how to set correctly
 2020-09-02 13:14:45 -04:00
Daniel Agar 2c3441aa90 boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 
- reduced now that calibration uses uORB::Subscription
 - can likely be reduced further (perhaps < 8) with additional testing
 2020-08-21 10:12:13 -04:00
Daniel Agar e3d31a881e boards: NuttX disable posix message queues 2020-07-17 17:00:21 -04:00
Daniel Agar 6f6efd60b7 boards: centralize optional external I2C sensor start 
- configured with new parameter SENS_EXT_I2C_PRB
 2020-06-10 09:04:13 -04:00
Daniel Agar 5e7d2e830d boards: delete old board.h boilerplate 2020-06-08 19:10:33 -04:00
Daniel Agar 746a8f5cf9 commander: reboot/shutdown usability fixes 
- always check with state machine before reboot/shutdown
 - respect BOARD_HAS_POWER_CONTROL (shutdown from command, low battery, power button)
 - px4_shutdown_request add optional delay and always execute from HPWORK
 - px4_shutdown_request split out px4_reboot_request
 2020-05-06 13:53:54 -04:00
Daniel Agar 28d2aca699 boards: include all procfs entries on boards that aren't flash constrained 2020-05-01 20:59:57 -04:00
Daniel Agar 8d0c92003a boards: remove all CONFIG_NXFONTS_DISABLE* 2020-05-01 20:59:57 -04:00
Beat Küng 34c75f2d36 boards: temporarily disable UART TX DMA 
work-around for https://github.com/PX4/Firmware/issues/14659.
This can be reverted when fixed properly.
 2020-04-27 08:47:46 -04:00
Daniel Agar 06478d9997 delete obsolete SENSORIOCSPOLLRATE/SENSORIOCRESET and systemcmds/config 2020-04-15 23:33:41 -04:00
mcsauder 6548fde024 Whitespace cleanup to quiet new blank line at EOF git hook. 2020-04-15 23:00:39 -04:00
Daniel Agar 66eacd24bc
px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins 
- increase stack sizes to run cleanly under stackcheck
     - this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
 - remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
 2020-04-11 21:16:10 -04:00
Daniel Agar 276b2cad5a
boards: fmu was renamed pwm_out 2020-04-11 14:18:55 -04:00
Beat Küng 8338f4e543 uvify/core: enable tx dma on telem2 2020-04-09 14:59:28 +02:00
Daniel Agar 7aa7f0ed95 switch remaining boards to new InvenSense IMU drivers 2020-04-07 09:59:12 -04:00
Daniel Agar 40b1043e12 NuttX boards minor lpwork and init stack increases 2020-04-02 23:39:17 -04:00
Daniel Agar 15332a7e56 boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15 2020-04-01 16:17:14 -04:00
Daniel Agar ca81175b07 rename drivers/px4fmu -> drivers/pwm_out 
- split out header
 2020-03-31 19:12:31 -04:00
Hyon Lim 2b54e19adf Script: As recent driver refactoring checkes start argument first, we change script accordingly. 2020-03-25 16:16:45 -04:00
Hyon Lim fd0ea29fc6 Board support: UVify Core. As Core is not using SPI4 as external, SPI4 external interface related code removed. 
Also, PMW3901 flow sensor is added on SPI2 bus.
 2020-03-25 16:16:45 -04:00
Hyon Lim 1161dac875 Script update: PMW3901 driver argument has changed. so we change scripts and SPI interface. 2020-03-25 16:16:45 -04:00
Hyon Lim e8f0c8e239 NSH argument stack increased. Specific MAVLink configuration requires more than 12 parameters. 2020-03-25 16:16:45 -04:00
Hyon Lim afcf0960df IFO-S RGB LED app setting has been changed. 2020-03-25 16:16:45 -04:00
Hyon Lim 15f997d337 Airframe: IFO-S setup is added. 2020-03-25 16:16:45 -04:00
Daniel Agar f5fe50f839 invensense/icm20608g driver minor improvements 
- interupt pin set active low and latch
 - relax retry timeout if configure failed
 - improve configured empty rate (sample rate) rounding
 - fix RegisterCheck
 - check FIFO count as part of full transfer and reset or adjust timing if necessary
 - rename DRV_IMU_DEVTYPE_ICM20608 -> DRV_IMU_DEVTYPE_ICM20608G
 2020-03-25 01:05:38 -04:00
Beat Küng b156fe5787 boards: remove deprecated SPI + I2C defines from board_config.h 
chip-selects are deselected in stm32_spiinitialize()
 2020-03-24 09:46:20 -04:00
Beat Küng 030ba24f53 refactor pca9685: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 7626be0485 refactor mpu9250: use driver base class 2020-03-24 09:46:20 -04:00
Daniel Agar 8738c26426
boards: enable NuttX SPI DMA buffers 
- update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers
 - remove explicit DMA buffer allocations from new IMU drivers
 - restore original BOARD_DMA_ALLOC_POOL_SIZE
 - decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing
 2020-03-22 19:24:26 -04:00