bb0f2875a9
ekf2: disable multi-EKF across mags by default (H7 & SITL) for now
...
- re-enable once the estimator selector respects configured mag
priority (at least initially) or is otherwise able to automatically
prefer an external mag over internal
- for SITL disabled because the full matrix of esitmator instances
(IMUs X mags) was too many topics for logger currently
2023-05-19 18:35:57 -06:00
0c218e6628
atl/mantis-edu: enable mavlink ftp
2022-08-12 09:43:12 +02:00
f454dcef6b
ROMFS: set control allocation parameters for airframes
...
Removes some airframes:
- 1000_rc_fw_easystar.hil
- 10015_tbs_discovery
- 10016_3dr_iris
- 10018_tbs_endurance
- 13001_caipirinha_vtol
- 13002_firefly6
- 13003_quad_tailsitter
- 13004_quad+_tailsitter
- 13005_vtol_AAERT_quad
- 13006_vtol_standard_delta
- 13007_vtol_AAVVT_quad
- 13008_QuadRanger
- 13009_vtol_spt_ranger
- 13012_convergence
- 13050_generic_vtol_octo
- 14001_tri_y_yaw+
- 14002_tri_y_yaw-
- 15001_coax_heli
- 2105_maja
- 2200_mini_talon
- 3031_phantom
- 3032_skywalker_x5
- 3033_wingwing
- 3036_pigeon
- 3100_tbs_caipirinha
- 4003_qavr5
- 4009_qav250
- 4019_x500_v2
- 4030_3dr_solo
- 4031_3dr_quad
- 4051_s250aq
- 4072_draco
- 4080_zmr250
- 4090_nanomind
- 4100_tiltquadrotor
- 50003_aion_robotics_r1_rover
2022-08-12 09:43:12 +02:00
6ed48ad0c0
ROMFS: Remove now unused variable
2022-01-10 23:04:10 -05:00
38439256e5
Mantis: move MIXER vars to airframe init
...
The two were actually conflicting and are now consolidated.
2022-01-10 23:04:10 -05:00
14fb019821
Mantis: move SYS_DM_BACKEND to board_defaults
...
Otherwise it is set too late and not used during startup.
2022-01-10 23:04:10 -05:00
feb2987fa8
Mantis: remove unused transition script
...
When coming from the previous stack there are no params anywhere, so
this will not execute anyway.
2022-01-10 23:04:10 -05:00
b92aa92bec
Mantis: fix mixer loading
...
The ordering before did not work out, and without the sleep it fails.
2022-01-10 23:04:10 -05:00
11b60904c3
Mantis: use lower log streaming rate
2022-01-10 23:04:10 -05:00
e15cbc3a6b
Mantis: move tap_esc to extras
...
This way we work around an issue where tap_esc got stuck during bootup
in a cold boot.
2022-01-10 23:04:10 -05:00
f03990f015
Mantis: prevent output setup from running
...
This is not required as we start tap_esc directly and load the mixer.
2022-01-10 23:04:10 -05:00
cb15728536
Mantis: save mission in RAM
...
This is using a reduced number of mission items of 1000 instead of 2000
in order to fit in RAM.
2022-01-10 23:04:10 -05:00
a50f7af3b1
Mantis: update bootloader and SYS_AUTOSTART
...
This adds a check for the previous SYS_AUTOSTART id. If it is still the
old/previous SYS_AUTOSTART id, it will flash the new bootloader as well
as set the proper SYS_AUTOSTART id.
2022-01-10 23:04:10 -05:00
daa925137c
boards: move default battery calibration defines to parameter defaults
2022-01-10 09:49:36 -05:00
6d78054f50
mavlink USB auto start/stop on boards with VBUS
...
- no longer start sercon or mavlink usb by default
- on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns
- the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected
- skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards
2021-10-03 15:32:54 -04:00
be2f65be35
drives/tap_esc: refactor to use OutputModuleInterface
2021-08-04 17:15:24 -04:00
2e02ad7c4e
atl_mantis-edu front and rear status LEDS
2021-08-04 17:15:24 -04:00
e900f2ea54
boards: Advanced Technology Labs (ATL) Mantis EDU support and airfarme (SYS_AUTOSTART 4061)
...
Co-authored-by: Julian Oes <julian@oes.ch>
Co-authored-by: Daniel Agar <daniel@agar.ca>
2021-08-04 17:15:24 -04:00
Daniel Agar
Junwoo Hwang
Beat Küng
Julian Oes