dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
43,619 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

52 Commits

Author SHA1 Message Date
Igor Mišić c1dbe177b8
boards: move FRAM emulated sector size to the 32-byte granularity (#21204) 2023-09-20 16:50:36 -04:00
alexklimaj 3d61ab84c4 Cannode add ability to get node ID after boot. Fix ARK CAN OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 2023-08-30 11:40:01 -04:00
Alex Klimaj ea97a38b2b
Initial Cannode PWM Support (#19748) 
* Add uavcannode esc/servo pwm control pipeline
* Remove cannode rc.interface with mixer purge
* Cannode add Kconfig options to reduce flash usage
 2023-03-15 11:20:07 -04:00
Daniel Agar 45912066d2 fix copyright header year range 2023-01-14 09:16:16 -05:00
Daniel Agar 635daeed8a NuttX push jlink-nuttx into cmake and enable CONFIG_DEBUG_TCBINFO by default 2023-01-12 09:05:26 -05:00
Daniel Agar dc5ce9b0ce
boards: NuttX increase default CONFIG_ARCH_INTERRUPTSTACK 512->768 bytes 
- during casual testing on default configs the stack was penetration was reaching ~90% which is a bit too close for comfort
 - increasing by 50% to be conservative
 2023-01-07 12:07:35 -05:00
Daniel Agar 40e3503c39 boards: fix all NuttX configs (CONFIG_SMALL NuttX upgrade migration) 2022-12-29 12:50:37 -05:00
Daniel Agar 0fbb6db6d4 boards: update all NuttX defconfig (make all_olddefconfig) 2022-12-29 12:50:37 -05:00
Daniel Agar 2cb4ef0629
NuttX 10.3+ upgrade (#20190) 
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com>
Co-authored-by: alexklimaj <alex@arkelectron.com>
 2022-11-20 20:28:07 -05:00
Igor Mišić 4b503c310e Merge PR #19575 (changes to pr-extendend_hw_ver_rev_format) 
- 4096 of 3 hex digits each for rev and ver is enough.
    #defines used in SPI versions do not be long format, use use the macro
 - Board provides a prefix and the formatting is sized and built in
 - No need for funky board_get_base_eeprom_mtd_manifest interface
    Original mft is used where the abstraction is done with the MFT interface

Co-authored-by: David Sidrane <David.Sidrane@Nscdg.com>
 2022-07-05 09:29:26 +02:00
Igor Mišić ec1614d156 boards: update id string from V5X{0-a}{0-a} to V5X{xxxx}{xxxx} 
boards: new format for hwtypecmp string
boards: update manifest.c to follow the new hw_ver_rev format
 2022-07-05 09:29:26 +02:00
alexklimaj 4cc3e78558 Add mag bias estimator to CAN GPS units with IMUs 
- run `sensors` hub to process sensor_mag and publish vehicle_magnetometer
 - update uavcannode to use vehicle_magnetometer
 2022-06-19 15:46:36 -04:00
Daniel Agar 5b6e5a0968 boards: NuttX update all boards to preallocated sem holder list 
- CONFIG_SEM_PREALLOCHOLDERS=32
 - CONFIG_SEM_NNESTPRIO=16 (default)
 2022-05-31 01:41:07 -07:00
Jukka Laitinen 700c13cdff Remove linking of arch_io_pins into drivers_board 
This goes the other way around; arch_io_pins is using the pin
definitions from drivers_board, so the drivers_board needs to be linked
into arch_io_pins

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-01-27 12:42:40 -05:00
Daniel Agar 8185e2a384 boards: board_app_initialize() don't return early on failure 
- depending on the situation we're more likely to get actionable user
feedback by allowing boot to complete rather than silently failing
 2021-12-09 20:41:54 -05:00
Daniel Agar a2064cceff boards: enable early MPU reset on any board potentially not using the PX4 bootloader 2021-12-01 20:13:41 -05:00
David Sidrane 6921b04600 holybro_can-gps-v1 nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
Daniel Agar f5d9b01f5c
NuttX build in place 
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
    - slightly faster skipping necessary copying (depending on system)
    - allows debugging in place
    - easier to work directly in NuttX following official documentation
    - simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
 - the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
 - also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
 2021-11-15 18:47:38 -05:00
Daniel Agar f1016dc32c boards: add systemcmds/topic_listener to CAN nodes 2021-10-21 14:06:11 -04:00
Daniel Agar cb6b1bd427 boards: delete unused test and debug variants 2021-10-07 10:09:01 -04:00
Peter van der Perk 33fd65e5fe [Kconfig] Fix regressions found by bloaty and cleanup unused cmake 2021-10-07 10:09:01 -04:00
Peter van der Perk 21e6547ac7 [Kconfig] Toolchain & platform fixes, SITL still broken 2021-10-07 10:09:01 -04:00
Peter van der Perk c2ad07b983 [Kconfig] Don't inherit kconfig when bootloader (and canbootloader) 2021-10-07 10:09:01 -04:00
Peter van der Perk 6af0477733 [Kconfig] Gnerate px4board from old cmake 
Added make updateconfig to update all config when default's have changed
Added cmake to px4board conversion script
 2021-10-07 10:09:01 -04:00
Daniel Agar bbfaa4694c
boards: cleanup serial RX DMA hrt_call_every 
- remove ts_to_abstime dependency
 2021-10-06 14:39:59 -04:00
Daniel Agar 51758bd7e6
boards: delete unused variants 2021-10-05 23:14:04 -04:00
David Sidrane 63e29b821c holybro_can-gps-v1:Ensure sensors are powered 2021-09-29 14:37:17 -04:00
Daniel Agar 40e5477edb NuttX boards fix mkfatfs and rcS logic 2021-09-01 15:16:00 -04:00
David Sidrane bb913ae11a system_load:Track Dynamic PID hash 2021-08-13 14:22:00 -04:00
David Sidrane b3555ada6b holybro_can-gps-v1: Update nsh defconfig NuttX 10.1.0+ 2021-08-13 14:22:00 -04:00
David Sidrane ec61512cdf NuttX inits null console 2021-08-13 14:22:00 -04:00
Beat Küng 0e1f3a2d62 px4_add_board: infer VENDOR, MODEL & LABEL from cmake file name 2021-08-03 10:36:25 +02:00
David Sidrane 05bdef867d Track NuttX syslog change 2021-06-16 17:07:47 +02:00
David Sidrane 62fd132047 boards:Use inttypes 
nxp_ucans32k146:Fix constant

spracing_h7extreme:Use inttypes
 2021-06-16 17:07:47 +02:00
David Sidrane 973068ebfe holybro_can-gps-v1:Rev to RC9 HW 
holybro_can-gps-v1:Fix LEDs

holybro_can-gps-v1:Only CAN1

holybro_can-gps-v1:ncp5623c at 0x39
 2021-05-29 10:53:27 -04:00
Beat Küng 369d375417 holybro_can-gps-v1_debug: disable ekf & listener due to flash overflow 2021-04-01 08:35:36 -04:00
Daniel Agar 6874e9fba0 boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default 
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
 2021-03-30 09:23:43 -04:00
Daniel Agar e58af90bac boards: holybro can-gps-v1 create separate default and debug variants 2021-03-28 12:39:22 -04:00
Daniel Agar 4d288512b5 add board architecture specific init defaults 2021-03-09 19:59:41 +01:00
David Sidrane fd0494555c canbootloader:stm32_boarddeinitialize->board_deinitialize 2021-02-24 19:20:15 +01:00
David Sidrane dd736f8540 holybro_can-gps-v1:Ensure yeild is used for FLASH programing 2021-02-23 17:45:25 -05:00
David Sidrane 174f2624df holybro_can-gps-v1:board_id uses as Uavcan HW version 2021-02-17 22:47:35 -05:00
David Sidrane 070db73e91 holybro_can-gps-v1:Use common uavcan board identity 2021-02-17 22:47:35 -05:00
Daniel Agar 8f0918a16b boards: remove unused linker __param section 2021-02-08 23:22:48 -05:00
Daniel Agar d67a84d941 boards: holybro can-gps-v1 fix bosch bmm150 path 2021-02-06 15:56:11 -05:00
David Sidrane 8167023dfb holybro_can-gps-v1: Reorder Sensor Startup for reliabiltiy 2021-02-05 19:55:16 -05:00
David Sidrane 9e834d26f8 holybro_can-gps-v1:Add Flash Based Parameters 2021-02-05 19:55:16 -05:00
David Sidrane 7b3ce832d6 holybro_can-gps-v1: Add UAVCAN CAN2 Support 2021-02-05 19:55:16 -05:00
David Sidrane fe732930d2 holybro_can-gps-v1:Fix ver HW NAME 2021-02-05 19:55:16 -05:00
David Sidrane caba734d26 PR review AIs 2021-02-05 19:55:16 -05:00