dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
43,375 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

50 Commits

Author SHA1 Message Date
alexklimaj 59abab8379 sensors: add parameter to silence imu clipping 2023-11-28 11:57:14 -05:00
Daniel Agar d7f388e590 boards: ARK CAN node NuttX flash savings 2023-10-31 09:59:15 -04:00
Igor Mišić c1dbe177b8
boards: move FRAM emulated sector size to the 32-byte granularity (#21204) 2023-09-20 16:50:36 -04:00
alexklimaj 3d61ab84c4 Cannode add ability to get node ID after boot. Fix ARK CAN OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 2023-08-30 11:40:01 -04:00
Alex Klimaj ea97a38b2b
Initial Cannode PWM Support (#19748) 
* Add uavcannode esc/servo pwm control pipeline
* Remove cannode rc.interface with mixer purge
* Cannode add Kconfig options to reduce flash usage
 2023-03-15 11:20:07 -04:00
Daniel Agar 9d7c4b8273
boards: ark_can-flow_default disable sensors/vehicle_acceleration to save flash 2023-01-18 22:58:19 -05:00
Daniel Agar 635daeed8a NuttX push jlink-nuttx into cmake and enable CONFIG_DEBUG_TCBINFO by default 2023-01-12 09:05:26 -05:00
alexklimaj e19c7ca18b Add reboot command to ark flow 2023-01-11 08:11:18 +01:00
Daniel Agar dc5ce9b0ce
boards: NuttX increase default CONFIG_ARCH_INTERRUPTSTACK 512->768 bytes 
- during casual testing on default configs the stack was penetration was reaching ~90% which is a bit too close for comfort
 - increasing by 50% to be conservative
 2023-01-07 12:07:35 -05:00
Daniel Agar 0fbb6db6d4 boards: update all NuttX defconfig (make all_olddefconfig) 2022-12-29 12:50:37 -05:00
Daniel Agar 2cb4ef0629
NuttX 10.3+ upgrade (#20190) 
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com>
Co-authored-by: alexklimaj <alex@arkelectron.com>
 2022-11-20 20:28:07 -05:00
alexklimaj fdf4b668eb Ark flow rev 3 with PAA3905" 
Add AFBR-S50LX85D
 2022-09-22 20:36:43 -04:00
Daniel Agar c7cec4252c sensors: add CONFIG_SENSORS_VEHICLE_AIRSPEED for airspeed/differential pressure 
- disable CONFIG_SENSORS_VEHICLE_AIRSPEED on boards only used for multicopter
 2022-06-17 19:31:45 -04:00
Daniel Agar 10deb7019e enable gyro_calibration for CAN nodes 
- allow saving initial gyro cal if very close to 0
 2022-06-17 19:31:45 -04:00
Daniel Agar 5b6e5a0968 boards: NuttX update all boards to preallocated sem holder list 
- CONFIG_SEM_PREALLOCHOLDERS=32
 - CONFIG_SEM_NNESTPRIO=16 (default)
 2022-05-31 01:41:07 -07:00
Jukka Laitinen 700c13cdff Remove linking of arch_io_pins into drivers_board 
This goes the other way around; arch_io_pins is using the pin
definitions from drivers_board, so the drivers_board needs to be linked
into arch_io_pins

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-01-27 12:42:40 -05:00
Daniel Agar 8185e2a384 boards: board_app_initialize() don't return early on failure 
- depending on the situation we're more likely to get actionable user
feedback by allowing boot to complete rather than silently failing
 2021-12-09 20:41:54 -05:00
David Sidrane c06e6ffaf7 ark_can-flow nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
Daniel Agar f5d9b01f5c
NuttX build in place 
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
    - slightly faster skipping necessary copying (depending on system)
    - allows debugging in place
    - easier to work directly in NuttX following official documentation
    - simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
 - the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
 - also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
 2021-11-15 18:47:38 -05:00
Daniel Agar 7b7b7acd36 i2c_spi_buses: respect CONFIG_I2C and CONFIG_SPI 
- bmp280, dps310, and ms5611 barometers support boards without I2C
 2021-11-15 15:57:33 -05:00
Daniel Agar f1016dc32c boards: add systemcmds/topic_listener to CAN nodes 2021-10-21 14:06:11 -04:00
Alex Klimaj b482986e8e
uavcannode: Add CANNODE_TERM parameter (configure CAN termination on ARK cannodes) 
- adds functionality to enable the built in can termination on the ARK cannodes
 2021-10-15 09:29:56 -04:00
Daniel Agar cb6b1bd427 boards: delete unused test and debug variants 2021-10-07 10:09:01 -04:00
Peter van der Perk 33fd65e5fe [Kconfig] Fix regressions found by bloaty and cleanup unused cmake 2021-10-07 10:09:01 -04:00
Peter van der Perk b3e799e277 [Kconfig] Add all distance sensors 2021-10-07 10:09:01 -04:00
Peter van der Perk 21e6547ac7 [Kconfig] Toolchain & platform fixes, SITL still broken 2021-10-07 10:09:01 -04:00
Peter van der Perk c2ad07b983 [Kconfig] Don't inherit kconfig when bootloader (and canbootloader) 2021-10-07 10:09:01 -04:00
Peter van der Perk 6af0477733 [Kconfig] Gnerate px4board from old cmake 
Added make updateconfig to update all config when default's have changed
Added cmake to px4board conversion script
 2021-10-07 10:09:01 -04:00
Daniel Agar 51758bd7e6
boards: delete unused variants 2021-10-05 23:14:04 -04:00
Daniel Agar 40e5477edb NuttX boards fix mkfatfs and rcS logic 2021-09-01 15:16:00 -04:00
David Sidrane bb913ae11a system_load:Track Dynamic PID hash 2021-08-13 14:22:00 -04:00
David Sidrane 7268c344e4 ark_can-flow: Update nsh defconfig NuttX 10.1.0+ 2021-08-13 14:22:00 -04:00
Beat Küng 0e1f3a2d62 px4_add_board: infer VENDOR, MODEL & LABEL from cmake file name 2021-08-03 10:36:25 +02:00
alexklimaj 72389c2306 Increase hp work priority. Turn on SPI2 DMA for AFBR. 2021-07-06 11:35:01 -04:00
alexklimaj 9d3e18dbe1 ARK Flow rev 2 add icm42688p 2021-06-25 09:44:45 -04:00
David Sidrane 05bdef867d Track NuttX syslog change 2021-06-16 17:07:47 +02:00
AlexKlimaj dddd2c3297
drivers/distance_sensor: New Broadcom AFBR-S50LV85D distance sensor driver 
* Basic Broadcom AFBR-S50 driver using vendor API and binary blob https://github.com/Broadcom/AFBR-S50-API
* fix ARK Flow paw3902 rotation
 2021-06-15 12:12:24 -04:00
alexklimaj 3e9b295c22 Add watchdog_init to ark boards to ensure watchdog pauses during debugging 2021-06-03 00:54:57 -04:00
Daniel Agar 6874e9fba0 boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default 
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
 2021-03-30 09:23:43 -04:00
Daniel Agar 19fc33a66e boards: ark/can-flow add debug build and reduce default 2021-03-19 15:44:57 +01:00
alexklimaj 69e57b22ac Add LEDs to ARK Can Bootloader 2021-03-17 18:10:22 -04:00
alexklimaj 38ce892582 ARK Flow sensor rotations 2021-03-17 18:06:38 -04:00
Daniel Agar 4d288512b5 add board architecture specific init defaults 2021-03-09 19:59:41 +01:00
David Sidrane fd0494555c canbootloader:stm32_boarddeinitialize->board_deinitialize 2021-02-24 19:20:15 +01:00
David Sidrane 84b3f51c6b ark_can-flow:Ensure yeild is used for FLASH programing 2021-02-23 17:45:25 -05:00
David Sidrane d1cadb6441 ark_can-flow:Assign board_id 2021-02-17 22:47:35 -05:00
David Sidrane 51a5c63bac ark_can-flow:Use common uavcan board identity 2021-02-17 22:47:35 -05:00
Daniel Agar 8f0918a16b boards: remove unused linker __param section 2021-02-08 23:22:48 -05:00
Daniel Agar 78dff6adcb boards: add CONSTRAINED_MEMORY build option 
- currently the main change is that it reduces the max number of ORB multi instances to 4, but usage will be expanded as needed
 - limits number of EKF2 multi instances to 2.
 - enabled on all cortex m4 boards
 2021-02-01 08:56:22 +01:00
alexklimaj 741c1da634 ARK Flow Basic Functionality 2021-01-28 08:56:10 -05:00