Add PX4 vision v1.5 Airframe

ROMFS/px4fmu_common/init.d/airframes/4016_holybro_px4vision

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# @name PX4 Vision DevKit Platform
+# @name PX4 Vision Dev Kit v1
 #
 # @type Quadrotor x
 # @class Copter

ROMFS/px4fmu_common/init.d/airframes/4020_holybro_px4vision_v1_5

@@ -0,0 +1,130 @@
+#!/bin/sh
+#
+# @name PX4 Vision Dev Kit v1.5
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+# Commander Parameters
+param set-default COM_OBS_AVOID 1
+param set-default COM_DISARM_LAND 0.5
+
+# EKF2 parameters
+param set-default EKF2_AID_MASK 35
+param set-default EKF2_IMU_POS_X 0.02
+param set-default EKF2_GPS_POS_X 0.055
+param set-default EKF2_GPS_POS_Z -0.15
+param set-default EKF2_MIN_RNG 0.03
+param set-default EKF2_OF_POS_X 0.055
+param set-default EKF2_OF_POS_Y 0.02
+param set-default EKF2_OF_POS_Z 0.065
+param set-default EKF2_REQ_HDRIFT 0.3
+param set-default EKF2_REQ_SACC 1
+param set-default EKF2_REQ_VDRIFT 0.3
+param set-default EKF2_RNG_A_HMAX 8
+param set-default EKF2_RNG_A_VMAX 2
+param set-default EKF2_RNG_POS_X 0.055
+param set-default EKF2_RNG_POS_Y -0.01
+param set-default EKF2_RNG_POS_Z 0.065
+param set-default EKF2_PCOEF_XP -0.25
+param set-default EKF2_PCOEF_YN -0.55
+param set-default EKF2_PCOEF_YP -0.55
+
+# MAVLink parameters
+param set-default MAV_0_CONFIG 101
+param set-default MAV_1_CONFIG 102
+param set-default MAV_1_RATE 80000
+param set-default MAV_1_MODE 9
+param set-default SER_TEL1_BAUD 921600
+
+# Vehicle attitude PID tuning
+param set-default MC_ACRO_EXPO 0
+param set-default MC_ACRO_EXPO_Y 0
+param set-default MC_ACRO_P_MAX 200
+param set-default MC_ACRO_R_MAX 200
+param set-default MC_ACRO_SUPEXPO 0
+param set-default MC_ACRO_SUPEXPOY 0
+param set-default MC_ACRO_Y_MAX 150
+param set-default MC_PITCHRATE_D 0.0015
+param set-default MC_ROLLRATE_D 0.0015
+param set-default MC_YAWRATE_P 0.3
+
+# Position Control Tuning
+param set-default CP_DIST 6
+param set-default MPC_ACC_DOWN_MAX 5
+param set-default MPC_ACC_HOR_MAX 10
+param set-default MPC_ACC_UP_MAX 4
+param set-default MPC_MANTHR_MIN 0
+param set-default MPC_MAN_Y_MAX 120
+param set-default MPC_TILTMAX_AIR 45
+param set-default MPC_THR_HOVER 0.3
+param set-default MPC_TKO_SPEED 1
+param set-default MPC_VEL_MANUAL 5
+param set-default MPC_XY_CRUISE 5
+param set-default MPC_XY_VEL_MAX 5
+param set-default MPC_XY_VEL_P_ACC 1.58
+param set-default MPC_XY_TRAJ_P 0.3
+param set-default MPC_Z_TRAJ_P 0.3
+param set-default MPC_Z_VEL_P_ACC 5
+param set-default MPC_Z_VEL_I_ACC 3
+param set-default MPC_LAND_ALT1 3
+param set-default MPC_LAND_ALT2 1
+param set-default MPC_POS_MODE 3
+param set-default CP_GO_NO_DATA 1
+
+# Navigator Parameters
+param set-default NAV_ACC_RAD 2
+
+# use oneshot motor output protocol
+param set-default PWM_MAIN_RATE 0
+
+# RTL Parameters
+param set-default RTL_DESCEND_ALT 5
+param set-default RTL_RETURN_ALT 5
+
+# Logging Parameters
+param set-default SDLOG_PROFILE 131
+
+# Sensors Parameters
+param set-default SENS_CM8JL65_CFG 202
+param set-default SENS_FLOW_MAXHGT 25
+param set-default SENS_FLOW_MINHGT 0.5
+param set-default IMU_GYRO_CUTOFF 100
+param set-default SENS_TFLOW_CFG 103
+
+# Power Parameters
+param set-default BAT1_N_CELLS 4
+param set-default BAT1_A_PER_V 36.364
+param set-default BAT1_V_DIV 18.182
+
+# Circuit breakers
+param set-default CBRK_IO_SAFETY 22027
+
+param set-default THR_MDL_FAC 0.3
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
+
+# Outputs
+param set-default PWM_AUX_FUNC1 101
+param set-default PWM_AUX_FUNC2 102
+param set-default PWM_AUX_FUNC3 103
+param set-default PWM_AUX_FUNC4 104
+

ROMFS/px4fmu_common/init.d/airframes/CMakeLists.txt

@@ -73,6 +73,7 @@ px4_add_romfs_files(
 	4016_holybro_px4vision
 	4017_nxp_hovergames
 	4019_x500_v2
+	4020_holybro_px4vision_v1_5
 	4030_3dr_solo
 	4031_3dr_quad
 	4040_reaper