dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity

boards: Add ModalAI Flight Core v2 initial support

This commit is contained in:
modaltb 2021-05-28 19:26:40 -07:00 committed by GitHub
parent 34de392425
commit e25cfaaa2f
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
31 changed files with 3736 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
.ci/Jenkinsfile-compile
View File

@ -57,6 +57,7 @@ pipeline {
"holybro_pix32v5_default",
"modalai_fc-v1_default",
"modalai_fc-v1_rtps",
"modalai_fc-v2_default",
"mro_ctrl-zero-f7_default",
"mro_ctrl-zero-f7-oem_default",
"mro_ctrl-zero-h7_default",

1
.github/workflows/compile_nuttx.yml vendored
View File

@ -45,6 +45,7 @@ jobs:
holybro_pix32v5_default,
modalai_fc-v1_default,
modalai_fc-v1_rtps,
modalai_fc-v2_default,
mro_ctrl-zero-f7-oem_default,
mro_ctrl-zero-f7_default,
mro_ctrl-zero-h7-oem_default,

5
.vscode/cmake-variants.yaml vendored
View File

@ -146,6 +146,11 @@ CONFIG:
buildType: MinSizeRel
settings:
CONFIG: modalai_fc-v1_default
modalai_fc-v2_default:
short: modalai_fc-v2
buildType: MinSizeRel
settings:
CONFIG: modalai_fc-v2_default
mro_ctrl-zero-f7_default:
short: mro_ctrl-zero-f7
buildType: MinSizeRel

20
boards/modalai/fc-v2/bootloader.cmake Normal file
View File

@ -0,0 +1,20 @@
px4_add_board(
PLATFORM nuttx
VENDOR modalai
MODEL fc-v2
LABEL bootloader
TOOLCHAIN arm-none-eabi
ARCHITECTURE cortex-m7
DRIVERS
# bootloader
MODULES
SYSTEMCMDS
EXAMPLES
)

135
boards/modalai/fc-v2/default.cmake Normal file
View File

@ -0,0 +1,135 @@
px4_add_board(
PLATFORM nuttx
VENDOR modalai
MODEL fc-v2
LABEL default
TOOLCHAIN arm-none-eabi
ARCHITECTURE cortex-m7
ROMFSROOT px4fmu_common
BUILD_BOOTLOADER
#IO px4_io-v2_default
UAVCAN_INTERFACES 1
UAVCAN_TIMER_OVERRIDE 2
#ETHERNET
SERIAL_PORTS
GPS1:/dev/ttyS0
TEL1:/dev/ttyS6
TEL2:/dev/ttyS4
DRIVERS
adc/ads1115
adc/board_adc
barometer # all available barometer drivers
batt_smbus
camera_capture
camera_trigger
differential_pressure # all available differential pressure drivers
distance_sensor # all available distance sensor drivers
dshot
gps
#heater
#imu # all available imu drivers
imu/bosch/bmi088
imu/invensense/icm20602
imu/invensense/icm20649
imu/invensense/icm20948 # required for ak09916 mag
imu/invensense/icm42688p
irlock
lights # all available light drivers
magnetometer # all available magnetometer drivers
optical_flow # all available optical flow drivers
osd
pca9685
pca9685_pwm_out
power_monitor/ina226
power_monitor/voxlpm
#protocol_splitter
pwm_out_sim
pwm_out
#px4io
rc_input
roboclaw
rpm
#safety_button
telemetry # all available telemetry drivers
#tone_alarm
uavcan
MODULES
airspeed_selector
attitude_estimator_q
camera_feedback
commander
dataman
ekf2
esc_battery
events
flight_mode_manager
fw_att_control
fw_pos_control_l1
gyro_calibration
gyro_fft
land_detector
landing_target_estimator
load_mon
local_position_estimator
logger
mavlink
mc_att_control
mc_hover_thrust_estimator
mc_pos_control
mc_rate_control
#micrortps_bridge
navigator
rc_update
rover_pos_control
sensors
sih
temperature_compensation
#uuv_att_control
#uuv_pos_control
vmount
vtol_att_control
SYSTEMCMDS
bl_update
dmesg
esc_calib
gpio
hardfault_log
i2cdetect
led_control
mft
mixer
motor_ramp
motor_test
mtd
nshterm
#netman
param
perf
pwm
reboot
#reflect
sd_bench
#serial_test
system_time
top
topic_listener
tune_control
uorb
#usb_connected
ver
work_queue
EXAMPLES
fake_gps
#fake_imu
#fake_magnetometer
#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
#hello
#hwtest # Hardware test
#matlab_csv_serial
#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
#rover_steering_control # Rover example app
#uuv_example_app
#work_item
)

13
boards/modalai/fc-v2/firmware.prototype Normal file
View File

@ -0,0 +1,13 @@
{
"board_id": 41776,
"magic": "PX4FWv1",
"description": "Firmware for the ModalAI Flight Core v2 board",
"image": "",
"build_time": 0,
"summary": "modalaifcv2",
"version": "0.1",
"image_size": 0,
"image_maxsize": 1966080,
"git_identity": "",
"board_revision": 0
}

5
boards/modalai/fc-v2/init/rc.board_defaults Normal file
View File

@ -0,0 +1,5 @@
#!/bin/sh
#
# ModalAI FC-v2 specific board defaults
#------------------------------------------------------------------------------

7
boards/modalai/fc-v2/init/rc.board_mavlink Normal file
View File

@ -0,0 +1,7 @@
#!/bin/sh
#
# ModalAI FC-v2 specific board MAVLink startup script.
#------------------------------------------------------------------------------
# Start MAVLink on the USB port
mavlink start -d /dev/ttyACM0

28
boards/modalai/fc-v2/init/rc.board_sensors Normal file
View File

@ -0,0 +1,28 @@
#!/bin/sh
#
# ModalAI FC-v2 specific board sensors init
#------------------------------------------------------------------------------
# VOXL ESC - TODO
#if param greater UART_ESC_CONFIG 0
#then
# modalai_esc -d /dev/ttyS4 start
#fi
board_adc start
# VOXL Power Module
voxlpm -X -b 3 -k -T VBATT start
voxlpm -X -b 3 -T P5VDC start
# Internal SPI1 ICM-42688
icm42688p -s -b 1 -R 12 start
# Internal SPI2 ICM-42688
icm42688p -s -b 2 -R 12 start
# Internal I2C mag
bmm150 -I start
# Internal I2C baro
bmp388 -I start

17
boards/modalai/fc-v2/nuttx-config/Kconfig Normal file
View File

@ -0,0 +1,17 @@
#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#
config BOARD_HAS_PROBES
bool "Board provides GPIO or other Hardware for signaling to timing analyze."
default y
---help---
This board provides GPIO FMU-CH1-5, CAP1-6 as PROBE_1-11 to provide timing signals from selected drivers.
config BOARD_USE_PROBES
bool "Enable the use the board provided FMU-CH1-5, CAP1-6 as PROBE_1-11"
default n
depends on BOARD_HAS_PROBES
---help---
Select to use GPIO FMU-CH1-5, CAP1-6 to provide timing signals from selected drivers.

94
boards/modalai/fc-v2/nuttx-config/bootloader/defconfig Normal file
View File

@ -0,0 +1,94 @@
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_DEV_CONSOLE is not set
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
# CONFIG_SPI_EXCHANGE is not set
# CONFIG_STM32H7_SYSCFG is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../nuttx-config"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
CONFIG_ARCH_CHIP="stm32h7"
CONFIG_ARCH_CHIP_STM32H753II=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_INTERRUPTSTACK=512
CONFIG_ARMV7M_BASEPRI_WAR=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_ARMV7M_MEMCPY=y
CONFIG_ARMV7M_USEBASEPRI=y
CONFIG_BOARDCTL_RESET=y
CONFIG_BOARD_INITTHREAD_PRIORITY=254
CONFIG_BOARD_LATE_INITIALIZE=y
CONFIG_BOARD_LOOPSPERMSEC=95150
CONFIG_BOARD_RESET_ON_ASSERT=2
CONFIG_C99_BOOL8=y
CONFIG_CDCACM=y
CONFIG_CDCACM_PRODUCTID=0xa32f
CONFIG_CDCACM_PRODUCTSTR="PX4 BL ModalAI FCv2"
CONFIG_CDCACM_RXBUFSIZE=600
CONFIG_CDCACM_TXBUFSIZE=12000
CONFIG_CDCACM_VENDORID=0x0483
CONFIG_CDCACM_VENDORSTR="ModalAI"
CONFIG_CLOCK_MONOTONIC=y
CONFIG_DEBUG_FULLOPT=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_DEFAULT_SMALL=y
CONFIG_DISABLE_MQUEUE=y
CONFIG_DISABLE_PTHREAD=y
CONFIG_EXPERIMENTAL=y
CONFIG_FDCLONE_DISABLE=y
CONFIG_FDCLONE_STDIO=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_IDLETHREAD_STACKSIZE=750
CONFIG_LIBC_FLOATINGPOINT=y
CONFIG_LIBC_LONG_LONG=y
CONFIG_LIBC_STRERROR=y
CONFIG_LIB_BOARDCTL=y
CONFIG_MAX_TASKS=8
CONFIG_MEMSET_64BIT=y
CONFIG_MEMSET_OPTSPEED=y
CONFIG_NFILE_DESCRIPTORS=5
CONFIG_PREALLOC_TIMERS=50
CONFIG_PTHREAD_STACK_MIN=512
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONFIG_SDCLONE_DISABLE=y
CONFIG_SERIAL_TERMIOS=y
CONFIG_SIG_DEFAULT=y
CONFIG_SIG_SIGALRM_ACTION=y
CONFIG_SIG_SIGUSR1_ACTION=y
CONFIG_SIG_SIGUSR2_ACTION=y
CONFIG_SPI=y
CONFIG_STACK_COLORATION=y
CONFIG_START_DAY=30
CONFIG_START_MONTH=11
CONFIG_STDIO_BUFFER_SIZE=32
CONFIG_STM32H7_BKPSRAM=y
CONFIG_STM32H7_DMA1=y
CONFIG_STM32H7_OTGFS=y
CONFIG_STM32H7_PROGMEM=y
CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
CONFIG_STM32H7_TIM1=y
CONFIG_STM32H7_USART3=y
CONFIG_SYSTEMTICK_HOOK=y
CONFIG_SYSTEM_CDCACM=y
CONFIG_TASK_NAME_SIZE=24
CONFIG_TTY_SIGINT=y
CONFIG_TTY_SIGINT_CHAR=0x03
CONFIG_TTY_SIGSTP=y
CONFIG_USART3_RXBUFSIZE=600
CONFIG_USART3_TXBUFSIZE=300
CONFIG_USBDEV=y
CONFIG_USBDEV_BUSPOWERED=y
CONFIG_USBDEV_MAXPOWER=500
CONFIG_USEC_PER_TICK=1000
CONFIG_USERMAIN_STACKSIZE=2944
CONFIG_USER_ENTRYPOINT="bootloader_main"

555
boards/modalai/fc-v2/nuttx-config/include/board.h Normal file
View File

@ -0,0 +1,555 @@
/************************************************************************************
* nuttx-configs/px4_fmu-v6x/include/board.h
*
* Copyright (C) 2016-2019 Gregory Nutt. All rights reserved.
* Authors: David Sidrane <david.sidrane@nscdg.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __NUTTX_CONFIG_PX4_FMU_V6X_INCLUDE_BOARD_H
#define __NUTTX_CONFIG_PX4_FMU_V6X_INCLUDE_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include "board_dma_map.h"
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
#include "stm32_rcc.h"
#include "stm32_sdmmc.h"
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* The px4_fmu-v6X board provides the following clock sources:
*
* X1: 16 MHz crystal for HSE
*
* So we have these clock source available within the STM32
*
* HSI: 16 MHz RC factory-trimmed
* HSE: 16 MHz crystal for HSE
*/
#define STM32_BOARD_XTAL 16000000ul
#define STM32_HSI_FREQUENCY 16000000ul
#define STM32_LSI_FREQUENCY 32000
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
#define STM32_LSE_FREQUENCY 32768
/* Main PLL Configuration.
*
* PLL source is HSE = 16,000,000
*
* PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
* Subject to:
*
* 1 <= PLLM <= 63
* 4 <= PLLN <= 512
* 150 MHz <= PLL_VCOL <= 420MHz
* 192 MHz <= PLL_VCOH <= 836MHz
*
* SYSCLK = PLL_VCO / PLLP
* CPUCLK = SYSCLK / D1CPRE
* Subject to
*
* PLLP1 = {2, 4, 6, 8, ..., 128}
* PLLP2,3 = {2, 3, 4, ..., 128}
* CPUCLK <= 480 MHz
*/
#define STM32_BOARD_USEHSE
#define STM32_PLLCFG_PLLSRC RCC_PLLCKSELR_PLLSRC_HSE
/* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
*
* PLL1_VCO = (16,000,000 / 1) * 60 = 960 MHz
*
* PLL1P = PLL1_VCO/2 = 960 MHz / 2 = 480 MHz
* PLL1Q = PLL1_VCO/4 = 960 MHz / 4 = 240 MHz
* PLL1R = PLL1_VCO/8 = 960 MHz / 8 = 120 MHz
*/
#define STM32_PLLCFG_PLL1CFG (RCC_PLLCFGR_PLL1VCOSEL_WIDE | \
RCC_PLLCFGR_PLL1RGE_4_8_MHZ | \
RCC_PLLCFGR_DIVP1EN | \
RCC_PLLCFGR_DIVQ1EN | \
RCC_PLLCFGR_DIVR1EN)
#define STM32_PLLCFG_PLL1M RCC_PLLCKSELR_DIVM1(1)
#define STM32_PLLCFG_PLL1N RCC_PLL1DIVR_N1(60)
#define STM32_PLLCFG_PLL1P RCC_PLL1DIVR_P1(2)
#define STM32_PLLCFG_PLL1Q RCC_PLL1DIVR_Q1(4)
#define STM32_PLLCFG_PLL1R RCC_PLL1DIVR_R1(8)
#define STM32_VCO1_FREQUENCY ((STM32_HSE_FREQUENCY / 1) * 60)
#define STM32_PLL1P_FREQUENCY (STM32_VCO1_FREQUENCY / 2)
#define STM32_PLL1Q_FREQUENCY (STM32_VCO1_FREQUENCY / 4)
#define STM32_PLL1R_FREQUENCY (STM32_VCO1_FREQUENCY / 8)
/* PLL2 */
#define STM32_PLLCFG_PLL2CFG (RCC_PLLCFGR_PLL2VCOSEL_WIDE | \
RCC_PLLCFGR_PLL2RGE_4_8_MHZ | \
RCC_PLLCFGR_DIVP2EN | \
RCC_PLLCFGR_DIVQ2EN | \
RCC_PLLCFGR_DIVR2EN)
#define STM32_PLLCFG_PLL2M RCC_PLLCKSELR_DIVM2(4)
#define STM32_PLLCFG_PLL2N RCC_PLL2DIVR_N2(48)
#define STM32_PLLCFG_PLL2P RCC_PLL2DIVR_P2(2)
#define STM32_PLLCFG_PLL2Q RCC_PLL2DIVR_Q2(2)
#define STM32_PLLCFG_PLL2R RCC_PLL2DIVR_R2(2)
#define STM32_VCO2_FREQUENCY ((STM32_HSE_FREQUENCY / 4) * 48)
#define STM32_PLL2P_FREQUENCY (STM32_VCO2_FREQUENCY / 2)
#define STM32_PLL2Q_FREQUENCY (STM32_VCO2_FREQUENCY / 2)
#define STM32_PLL2R_FREQUENCY (STM32_VCO2_FREQUENCY / 2)
/* PLL3 */
#define STM32_PLLCFG_PLL3CFG (RCC_PLLCFGR_PLL3VCOSEL_WIDE | \
RCC_PLLCFGR_PLL3RGE_4_8_MHZ | \
RCC_PLLCFGR_DIVQ3EN)
#define STM32_PLLCFG_PLL3M RCC_PLLCKSELR_DIVM3(4)
#define STM32_PLLCFG_PLL3N RCC_PLL3DIVR_N3(48)
#define STM32_PLLCFG_PLL3P RCC_PLL3DIVR_P3(2)
#define STM32_PLLCFG_PLL3Q RCC_PLL3DIVR_Q3(4)
#define STM32_PLLCFG_PLL3R RCC_PLL3DIVR_R3(2)
#define STM32_VCO3_FREQUENCY ((STM32_HSE_FREQUENCY / 4) * 48)
#define STM32_PLL3P_FREQUENCY (STM32_VCO3_FREQUENCY / 2)
#define STM32_PLL3Q_FREQUENCY (STM32_VCO3_FREQUENCY / 4)
#define STM32_PLL3R_FREQUENCY (STM32_VCO3_FREQUENCY / 2)
/* SYSCLK = PLL1P = 480MHz
* CPUCLK = SYSCLK / 1 = 480 MHz
*/
#define STM32_RCC_D1CFGR_D1CPRE (RCC_D1CFGR_D1CPRE_SYSCLK)
#define STM32_SYSCLK_FREQUENCY (STM32_PLL1P_FREQUENCY)
#define STM32_CPUCLK_FREQUENCY (STM32_SYSCLK_FREQUENCY / 1)
/* Configure Clock Assignments */
/* AHB clock (HCLK) is SYSCLK/2 (240 MHz max)
* HCLK1 = HCLK2 = HCLK3 = HCLK4 = 240
*/
#define STM32_RCC_D1CFGR_HPRE RCC_D1CFGR_HPRE_SYSCLKd2 /* HCLK = SYSCLK / 2 */
#define STM32_ACLK_FREQUENCY (STM32_CPUCLK_FREQUENCY / 2) /* ACLK in D1, HCLK3 in D1 */
#define STM32_HCLK_FREQUENCY (STM32_CPUCLK_FREQUENCY / 2) /* HCLK in D2, HCLK4 in D3 */
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
/* APB1 clock (PCLK1) is HCLK/2 (120 MHz) */
#define STM32_RCC_D2CFGR_D2PPRE1 RCC_D2CFGR_D2PPRE1_HCLKd2 /* PCLK1 = HCLK / 2 */
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* APB2 clock (PCLK2) is HCLK/2 (120 MHz) */
#define STM32_RCC_D2CFGR_D2PPRE2 RCC_D2CFGR_D2PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* APB3 clock (PCLK3) is HCLK/2 (120 MHz) */
#define STM32_RCC_D1CFGR_D1PPRE RCC_D1CFGR_D1PPRE_HCLKd2 /* PCLK3 = HCLK / 2 */
#define STM32_PCLK3_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* APB4 clock (PCLK4) is HCLK/4 (120 MHz) */
#define STM32_RCC_D3CFGR_D3PPRE RCC_D3CFGR_D3PPRE_HCLKd2 /* PCLK4 = HCLK / 2 */
#define STM32_PCLK4_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* Timer clock frequencies */
/* Timers driven from APB1 will be twice PCLK1 */
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
/* Timers driven from APB2 will be twice PCLK2 */
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM15_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM16_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM17_CLKIN (2*STM32_PCLK2_FREQUENCY)
/* Kernel Clock Configuration
*
* Note: look at Table 54 in ST Manual
*/
/* I2C123 clock source */
#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI
/* I2C4 clock source */
#define STM32_RCC_D3CCIPR_I2C4SRC RCC_D3CCIPR_I2C4SEL_HSI
/* SPI123 clock source */
#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL2
/* SPI45 clock source */
#define STM32_RCC_D2CCIP1R_SPI45SRC RCC_D2CCIP1R_SPI45SEL_PLL2
/* SPI6 clock source */
#define STM32_RCC_D3CCIPR_SPI6SRC RCC_D3CCIPR_SPI6SEL_PLL2
/* USB 1 and 2 clock source */
#define STM32_RCC_D2CCIP2R_USBSRC RCC_D2CCIP2R_USBSEL_PLL3
/* ADC 1 2 3 clock source */
#define STM32_RCC_D3CCIPR_ADCSEL RCC_D3CCIPR_ADCSEL_PLL2
/* FDCAN 1 2 clock source */
#define STM32_RCC_D2CCIP1R_FDCANSEL RCC_D2CCIP1R_FDCANSEL_HSE /* FDCAN 1 2 clock source */
#define STM32_FDCANCLK STM32_HSE_FREQUENCY
/* FLASH wait states
*
* ------------ ---------- -----------
* Vcore MAX ACLK WAIT STATES
* ------------ ---------- -----------
* 1.15-1.26 V 70 MHz 0
* (VOS1 level) 140 MHz 1
* 210 MHz 2
* 1.05-1.15 V 55 MHz 0
* (VOS2 level) 110 MHz 1
* 165 MHz 2
* 220 MHz 3
* 0.95-1.05 V 45 MHz 0
* (VOS3 level) 90 MHz 1
* 135 MHz 2
* 180 MHz 3
* 225 MHz 4
* ------------ ---------- -----------
*/
#define BOARD_FLASH_WAITSTATES 2
/* SDMMC definitions ********************************************************/
/* Init 400kHz, freq = PLL1Q/(2*div) div = PLL1Q/(2*freq) */
#define STM32_SDMMC_INIT_CLKDIV (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
/* 25 MHz Max for now, 25 mHZ = PLL1Q/(2*div), div = PLL1Q/(2*freq)
* div = 4.8 = 240 / 50, So round up to 5 for default speed 24 MB/s
*/
#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
# define STM32_SDMMC_MMCXFR_CLKDIV (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
#else
# define STM32_SDMMC_MMCXFR_CLKDIV (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
#endif
#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
# define STM32_SDMMC_SDXFR_CLKDIV (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
#else
# define STM32_SDMMC_SDXFR_CLKDIV (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
#endif
#define STM32_SDMMC_CLKCR_EDGE STM32_SDMMC_CLKCR_NEGEDGE
/* LED definitions ******************************************************************/
/* The PX4 FMUV6X board has three, LED_GREEN a Green LED, LED_BLUE a Blue LED and
* LED_RED a Red LED, that can be controlled by software.
*
* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
* The following definitions are used to access individual LEDs.
*/
/* LED index values for use with board_userled() */
/* LED definitions ******************************************************************/
/* The px4_fmu-v6x board has three, LED_GREEN a Green LED, LED_BLUE a Blue LED and
* LED_RED a Red LED, that can be controlled by software.
*
* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
* The following definitions are used to access individual LEDs.
*/
/* LED index values for use with board_userled() */
#define BOARD_LED1 0
#define BOARD_LED2 1
#define BOARD_LED3 2
#define BOARD_NLEDS 3
#define BOARD_LED_RED BOARD_LED1
#define BOARD_LED_GREEN BOARD_LED2
#define BOARD_LED_BLUE BOARD_LED3
/* LED bits for use with board_userled_all() */
#define BOARD_LED1_BIT (1 << BOARD_LED1)
#define BOARD_LED2_BIT (1 << BOARD_LED2)
#define BOARD_LED3_BIT (1 << BOARD_LED3)
/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
* include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
* events as follows:
*
*
* SYMBOL Meaning LED state
* Red Green Blue
* ---------------------- -------------------------- ------ ------ ----*/
#define LED_STARTED 0 /* NuttX has been started OFF OFF OFF */
#define LED_HEAPALLOCATE 1 /* Heap has been allocated OFF OFF ON */
#define LED_IRQSENABLED 2 /* Interrupts enabled OFF ON OFF */
#define LED_STACKCREATED 3 /* Idle stack created OFF ON ON */
#define LED_INIRQ 4 /* In an interrupt N/C N/C GLOW */
#define LED_SIGNAL 5 /* In a signal handler N/C GLOW N/C */
#define LED_ASSERTION 6 /* An assertion failed GLOW N/C GLOW */
#define LED_PANIC 7 /* The system has crashed Blink OFF N/C */
#define LED_IDLE 8 /* MCU is is sleep mode ON OFF OFF */
/* Thus if the Green LED is statically on, NuttX has successfully booted and
* is, apparently, running normally. If the Red LED is flashing at
* approximately 2Hz, then a fatal error has been detected and the system
* has halted.
*/
/* Alternate function pin selections ************************************************/
#define GPIO_USART1_RX GPIO_USART1_RX_3 /* PB7 */
#define GPIO_USART1_TX GPIO_USART1_TX_3 /* PB6 */
#define GPIO_USART2_RX GPIO_USART2_RX_1 /* PA3 */
#define GPIO_USART2_TX GPIO_USART2_TX_2 /* PD5 */
#define GPIO_USART2_RTS GPIO_USART2_RTS_2 /* PD4 */
#define GPIO_USART2_CTS GPIO_USART2_CTS_NSS_2 /* PD3 */
#define GPIO_USART3_RX GPIO_USART3_RX_3 /* PD9 */
#define GPIO_USART3_TX GPIO_USART3_TX_3 /* PD8 */
#define GPIO_UART4_RX GPIO_UART4_RX_6 /* PH14 */
#define GPIO_UART4_TX GPIO_UART4_TX_6 /* PH13 */
#define GPIO_UART5_RX GPIO_UART5_RX_3 /* PD2 */
#define GPIO_UART5_TX GPIO_UART5_TX_3 /* PC12 */
// GPIO_UART5_RTS no remap /* PC8 */
// GPIO_UART5_CTS No remap /* PC9 */
#define GPIO_USART6_RX GPIO_USART6_RX_1 /* PC7 */
#define GPIO_USART6_TX GPIO_USART6_TX_1 /* PC6 */
#define GPIO_UART7_RX GPIO_UART7_RX_4 /* PF6 */
#define GPIO_UART7_TX GPIO_UART7_TX_3 /* PE8 */
#define GPIO_UART7_RTS GPIO_UART7_RTS_2 /* PF8 */
#define GPIO_UART7_CTS GPIO_UART7_CTS_1 /* PE10 */
#define GPIO_UART8_RX GPIO_UART8_RX_1 /* PE0 */
#define GPIO_UART8_TX GPIO_UART8_TX_1 /* PE1 */
/* CAN
*
* CAN1 is routed to transceiver.
*/
#define GPIO_CAN1_RX GPIO_CAN1_RX_3 /* PD0 */
#define GPIO_CAN1_TX GPIO_CAN1_TX_3 /* PD1 */
/* SPI
* SPI1 is IMU1
* SPI2 is IMU2
* SPI3 is Not Used
* SPI4 is Magnetometer
* SPI5 is FRAM
* SPI6 is EXTERNAL1
*
*/
#define ADJ_SLEW_RATE(p) (((p) & ~GPIO_SPEED_MASK) | (GPIO_SPEED_2MHz))
#define GPIO_SPI1_MISO GPIO_SPI1_MISO_3 /* PG9 */
#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_2 /* PB5 */
#define GPIO_SPI1_SCK ADJ_SLEW_RATE(GPIO_SPI1_SCK_1) /* PA5 */
#define GPIO_SPI2_MISO GPIO_SPI2_MISO_3 /* PI2 */
#define GPIO_SPI2_MOSI GPIO_SPI2_MOSI_4 /* PI3 */
#define GPIO_SPI2_SCK ADJ_SLEW_RATE(GPIO_SPI2_SCK_6) /* PI1 */
#define GPIO_SPI4_MISO GPIO_SPI4_MISO_2 /* PE13 */
#define GPIO_SPI4_MOSI GPIO_SPI4_MOSI_2 /* PE14 */
#define GPIO_SPI4_SCK ADJ_SLEW_RATE(GPIO_SPI4_SCK_2) /* PE12 */
#define GPIO_SPI5_MISO GPIO_SPI5_MISO_2 /* PH7 */
#define GPIO_SPI5_MOSI GPIO_SPI5_MOSI_1 /* PF11 */
#define GPIO_SPI5_SCK ADJ_SLEW_RATE(GPIO_SPI5_SCK_1) /* PF7 */
#define GPIO_SPI6_MISO GPIO_SPI6_MISO_2 /* PA6 */
#define GPIO_SPI6_MOSI GPIO_SPI6_MOSI_1 /* PG14 */
#define GPIO_SPI6_SCK ADJ_SLEW_RATE(GPIO_SPI6_SCK_3) /* PB3 */
/* I2C
*
* The optional _GPIO configurations allow the I2C driver to manually
* reset the bus to clear stuck slaves. They match the pin configuration,
* but are normally-high GPIOs.
*
*/
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2 /* PB8 */
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2 /* PB9 */
#define GPIO_I2C1_SCL_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN8)
#define GPIO_I2C1_SDA_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN9)
#define GPIO_I2C2_SCL GPIO_I2C2_SCL_2 /* PF1 */
#define GPIO_I2C2_SDA GPIO_I2C2_SDA_2 /* PF0 */
#define GPIO_I2C2_SCL_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN1)
#define GPIO_I2C2_SDA_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN0)
#define GPIO_I2C3_SCL GPIO_I2C3_SCL_1 /* PA8 */
#define GPIO_I2C3_SDA GPIO_I2C3_SDA_2 /* PH8 */
#define GPIO_I2C3_SCL_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTA | GPIO_PIN8)
#define GPIO_I2C3_SDA_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTH | GPIO_PIN8)
#define GPIO_I2C4_SCL GPIO_I2C4_SCL_2 /* PF14 */
#define GPIO_I2C4_SDA GPIO_I2C4_SDA_2 /* PF15 */
#define GPIO_I2C4_SCL_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN14)
#define GPIO_I2C4_SDA_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN15)
/* SDMMC2
*
* VDD 3.3
* GND
* SDMMC2_CK PD6
* SDMMC2_CMD PD7
* SDMMC2_D0 PB14
* SDMMC2_D1 PB15
* SDMMC2_D2 PG11
* SDMMC2_D3 PB4
*/
#define GPIO_SDMMC2_CK GPIO_SDMMC2_CK_1 /* PD6 */
#define GPIO_SDMMC2_CMD GPIO_SDMMC2_CMD_1 /* PD7 */
// GPIO_SDMMC2_D0 No Remap /* PB14 */
// GPIO_SDMMC2_D1 No Remap /* PB15 */
#define GPIO_SDMMC2_D2 GPIO_SDMMC2_D2_1 /* PG11 */
// GPIO_SDMMC2_D3 No Remap /* PB4 */
/* The STM32 H7 connects to a TI DP83848TSQ/NOPB
* using RMII
*
* STM32 H7 BOARD DP83848TSQ/NOPB
* GPIO SIGNAL PIN NAME
* -------- ------------ -------------
* PA7 ETH_CRS_DV CRS_DV
* PC1 ETH_MDC MDC
* PA2 ETH_MDIO MDIO
* PA1 ETH_REF_CL X1
* PC4 ETH_RXD0 RX_D0
* PC5 ETH_RXD1 RX_D1
* PB11 ETH_TX_EN TX_EN
* PG13 ETH_TXD0 TX_D0
* PG12 ETH_TXD1 TX_D1
*
* The PHY address is 1, since COL/PHYAD0 features a pull up.
*/
#define GPIO_ETH_RMII_TX_EN GPIO_ETH_RMII_TX_EN_1 /* PB11 */
#define GPIO_ETH_RMII_TXD0 GPIO_ETH_RMII_TXD0_2 /* PG13 */
#define GPIO_ETH_RMII_TXD1 GPIO_ETH_RMII_TXD1_2 /* PG12 */
/* USB
*
* OTG_FS_DM PA11
* OTG_FS_DP PA12
* VBUS PA9
*/
/* Board provides GPIO or other Hardware for signaling to timing analyzer */
#if defined(CONFIG_BOARD_USE_PROBES)
# include "stm32_gpio.h"
# define PROBE_N(n) (1<<((n)-1))
# define PROBE_1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTI|GPIO_PIN0) /* PI0 AUX1 */
# define PROBE_2 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN12) /* PH12 AUX2 */
# define PROBE_3 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN11) /* PH11 AUX3 */
# define PROBE_4 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN10) /* PH10 AUX4 */
# define PROBE_5 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN13) /* PD13 AUX5 */
# define PROBE_6 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14) /* PD14 AUX6 */
# define PROBE_7 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN6) /* PH6 AUX7 */
# define PROBE_8 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN9) /* PH9 AUX8 */
# define PROBE_9 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN11) /* PE11 CAP1 */
# define PROBE_INIT(mask) \
do { \
if ((mask)& PROBE_N(1)) { stm32_configgpio(PROBE_1); } \
if ((mask)& PROBE_N(2)) { stm32_configgpio(PROBE_2); } \
if ((mask)& PROBE_N(3)) { stm32_configgpio(PROBE_3); } \
if ((mask)& PROBE_N(4)) { stm32_configgpio(PROBE_4); } \
if ((mask)& PROBE_N(5)) { stm32_configgpio(PROBE_5); } \
if ((mask)& PROBE_N(6)) { stm32_configgpio(PROBE_6); } \
if ((mask)& PROBE_N(7)) { stm32_configgpio(PROBE_7); } \
if ((mask)& PROBE_N(8)) { stm32_configgpio(PROBE_8); } \
if ((mask)& PROBE_N(9)) { stm32_configgpio(PROBE_9); } \
} while(0)
# define PROBE(n,s) do {stm32_gpiowrite(PROBE_##n,(s));}while(0)
# define PROBE_MARK(n) PROBE(n,false);PROBE(n,true)
#else
# define PROBE_INIT(mask)
# define PROBE(n,s)
# define PROBE_MARK(n)
#endif
#endif /*__NUTTX_CONFIG_PX4_FMU_V6X_INCLUDE_BOARD_H */

51
boards/modalai/fc-v2/nuttx-config/include/board_dma_map.h Normal file
View File

@ -0,0 +1,51 @@
/****************************************************************************
*
* Copyright (c) 2020 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#pragma once
// DMAMUX1
#define DMAMAP_SPI1_RX DMAMAP_DMA12_SPI1RX_0 /* DMA1:37 */
#define DMAMAP_SPI1_TX DMAMAP_DMA12_SPI1TX_0 /* DMA1:38 */
#define DMAMAP_SPI2_RX DMAMAP_DMA12_SPI2RX_0 /* DMA1:39 */
#define DMAMAP_SPI2_TX DMAMAP_DMA12_SPI2TX_0 /* DMA1:40 */
#define DMAMAP_USART6_RX DMAMAP_DMA12_USART6RX_0 /* DMA1:71 */
#define DMAMAP_USART6_TX DMAMAP_DMA12_USART6TX_0 /* DMA1:72 */
// DMAMUX2
#define DMAMAP_SPI3_RX DMAMAP_DMA12_SPI3RX_1 /* DMA2:61 */
#define DMAMAP_SPI3_TX DMAMAP_DMA12_SPI3TX_1 /* DMA2:62 */
#define DMAMAP_SPI6_RX DMAMAP_BDMA_SPI6_RX /* BDMA:11 */
#define DMAMAP_SPI6_TX DMAMAP_BDMA_SPI6_TX /* BDMA:12 */

253
boards/modalai/fc-v2/nuttx-config/nsh/defconfig Normal file
View File

@ -0,0 +1,253 @@
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_DISABLE_ENVIRON is not set
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
# CONFIG_MMCSD_HAVE_CARDDETECT is not set
# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
# CONFIG_MMCSD_MMCSUPPORT is not set
# CONFIG_MMCSD_SPI is not set
# CONFIG_NSH_DISABLEBG is not set
# CONFIG_NSH_DISABLESCRIPT is not set
# CONFIG_NSH_DISABLE_DF is not set
# CONFIG_NSH_DISABLE_EXEC is not set
# CONFIG_NSH_DISABLE_EXIT is not set
# CONFIG_NSH_DISABLE_GET is not set
# CONFIG_NSH_DISABLE_ITEF is not set
# CONFIG_NSH_DISABLE_LOOPS is not set
# CONFIG_NSH_DISABLE_SEMICOLON is not set
# CONFIG_NSH_DISABLE_TIME is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../nuttx-config"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
CONFIG_ARCH_CHIP="stm32h7"
CONFIG_ARCH_CHIP_STM32H753II=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_INTERRUPTSTACK=512
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_BASEPRI_WAR=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_ARMV7M_MEMCPY=y
CONFIG_ARMV7M_USEBASEPRI=y
CONFIG_BOARDCTL_RESET=y
CONFIG_BOARD_CRASHDUMP=y
CONFIG_BOARD_LOOPSPERMSEC=95751
CONFIG_BOARD_RESET_ON_ASSERT=2
CONFIG_BUILTIN=y
CONFIG_C99_BOOL8=y
CONFIG_CDCACM=y
CONFIG_CDCACM_PRODUCTID=0xa32f
CONFIG_CDCACM_PRODUCTSTR="PX4 FMU ModalAI FCv1"
CONFIG_CDCACM_RXBUFSIZE=600
CONFIG_CDCACM_TXBUFSIZE=12000
CONFIG_CDCACM_VENDORID=0x0483
CONFIG_CDCACM_VENDORSTR="ModalAI"
CONFIG_CLOCK_MONOTONIC=y
CONFIG_DEBUG_FULLOPT=y
CONFIG_DEBUG_HARDFAULT_ALERT=y
CONFIG_DEBUG_MEMFAULT=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_DEFAULT_SMALL=y
CONFIG_DEV_FIFO_SIZE=0
CONFIG_DEV_PIPE_MAXSIZE=1024
CONFIG_DEV_PIPE_SIZE=70
CONFIG_EXPERIMENTAL=y
CONFIG_FAT_DMAMEMORY=y
CONFIG_FAT_LCNAMES=y
CONFIG_FAT_LFN=y
CONFIG_FAT_LFN_ALIAS_HASH=y
CONFIG_FDCLONE_STDIO=y
CONFIG_FS_BINFS=y
CONFIG_FS_CROMFS=y
CONFIG_FS_FAT=y
CONFIG_FS_FATTIME=y
CONFIG_FS_PROCFS=y
CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
CONFIG_FS_PROCFS_REGISTER=y
CONFIG_FS_ROMFS=y
CONFIG_GRAN=y
CONFIG_GRAN_INTR=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_I2C=y
CONFIG_I2C_RESET=y
CONFIG_IDLETHREAD_STACKSIZE=750
CONFIG_IOB_NBUFFERS=24
CONFIG_IOB_NCHAINS=24
CONFIG_LIBC_FLOATINGPOINT=y
CONFIG_LIBC_LONG_LONG=y
CONFIG_LIBC_STRERROR=y
CONFIG_MAX_TASKS=64
CONFIG_MEMSET_64BIT=y
CONFIG_MEMSET_OPTSPEED=y
CONFIG_MMCSD=y
CONFIG_MMCSD_SDIO=y
CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
CONFIG_MM_IOB=y
CONFIG_MM_REGIONS=4
CONFIG_MTD=y
CONFIG_MTD_BYTE_WRITE=y
CONFIG_MTD_PARTITION=y
CONFIG_MTD_PROGMEM=y
CONFIG_MTD_RAMTRON=y
CONFIG_NAME_MAX=40
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_ARCHROMFS=y
CONFIG_NSH_ARGCAT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_CMDPARMS=y
CONFIG_NSH_CROMFSETC=y
CONFIG_NSH_DISABLE_MB=y
CONFIG_NSH_DISABLE_MH=y
CONFIG_NSH_DISABLE_MW=y
CONFIG_NSH_LINELEN=128
CONFIG_NSH_MAXARGUMENTS=15
CONFIG_NSH_NESTDEPTH=8
CONFIG_NSH_QUOTE=y
CONFIG_NSH_ROMFSETC=y
CONFIG_NSH_ROMFSSECTSIZE=128
CONFIG_NSH_STRERROR=y
CONFIG_NSH_VARS=y
CONFIG_PIPES=y
CONFIG_PREALLOC_TIMERS=50
CONFIG_PRIORITY_INHERITANCE=y
CONFIG_PTHREAD_MUTEX_ROBUST=y
CONFIG_PTHREAD_STACK_MIN=512
CONFIG_RAMTRON_SETSPEED=y
CONFIG_RAMTRON_WRITEWAIT=y
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONFIG_READLINE_CMD_HISTORY=y
CONFIG_READLINE_TABCOMPLETION=y
CONFIG_RTC_DATETIME=y
CONFIG_SCHED_ATEXIT=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_HPWORKPRIORITY=249
CONFIG_SCHED_HPWORKSTACKSIZE=1280
CONFIG_SCHED_INSTRUMENTATION=y
CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
CONFIG_SCHED_LPWORK=y
CONFIG_SCHED_LPWORKPRIORITY=50
CONFIG_SCHED_LPWORKSTACKSIZE=1632
CONFIG_SCHED_WAITPID=y
CONFIG_SDCLONE_DISABLE=y
CONFIG_SDMMC2_SDIO_PULLUP=y
CONFIG_SEM_NNESTPRIO=8
CONFIG_SEM_PREALLOCHOLDERS=0
CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
CONFIG_SERIAL_TERMIOS=y
CONFIG_SIG_DEFAULT=y
CONFIG_SIG_SIGALRM_ACTION=y
CONFIG_SIG_SIGUSR1_ACTION=y
CONFIG_SIG_SIGUSR2_ACTION=y
CONFIG_SIG_SIGWORK=4
CONFIG_STACK_COLORATION=y
CONFIG_START_DAY=30
CONFIG_START_MONTH=11
CONFIG_STDIO_BUFFER_SIZE=256
CONFIG_STM32H7_ADC1=y
CONFIG_STM32H7_ADC3=y
CONFIG_STM32H7_BBSRAM=y
CONFIG_STM32H7_BBSRAM_FILES=5
CONFIG_STM32H7_BDMA=y
CONFIG_STM32H7_BKPSRAM=y
CONFIG_STM32H7_DMA1=y
CONFIG_STM32H7_DMA2=y
CONFIG_STM32H7_DMACAPABLE=y
CONFIG_STM32H7_FLASH_OVERRIDE_I=y
CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
CONFIG_STM32H7_I2C1=y
CONFIG_STM32H7_I2C2=y
CONFIG_STM32H7_I2C3=y
CONFIG_STM32H7_I2C4=y
CONFIG_STM32H7_I2C_DYNTIMEO=y
CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
CONFIG_STM32H7_OTGFS=y
CONFIG_STM32H7_PHYSR=31
CONFIG_STM32H7_PHYSR_100MBPS=0x8
CONFIG_STM32H7_PHYSR_FULLDUPLEX=0x10
CONFIG_STM32H7_PHYSR_MODE=0x10
CONFIG_STM32H7_PHYSR_SPEED=0x8
CONFIG_STM32H7_PROGMEM=y
CONFIG_STM32H7_RTC=y
CONFIG_STM32H7_RTC_AUTO_LSECLOCK_START_DRV_CAPABILITY=y
CONFIG_STM32H7_RTC_MAGIC_REG=1
CONFIG_STM32H7_SAVE_CRASHDUMP=y
CONFIG_STM32H7_SDMMC2=y
CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
CONFIG_STM32H7_SPI1=y
CONFIG_STM32H7_SPI1_DMA=y
CONFIG_STM32H7_SPI1_DMA_BUFFER=1024
CONFIG_STM32H7_SPI2=y
CONFIG_STM32H7_SPI2_DMA=y
CONFIG_STM32H7_SPI2_DMA_BUFFER=4096
CONFIG_STM32H7_SPI4=y
CONFIG_STM32H7_SPI5=y
CONFIG_STM32H7_SPI6=y
CONFIG_STM32H7_SPI_DMA=y
CONFIG_STM32H7_SPI_DMATHRESHOLD=8
CONFIG_STM32H7_TIM12=y
CONFIG_STM32H7_TIM1=y
CONFIG_STM32H7_TIM4=y
CONFIG_STM32H7_TIM5=y
CONFIG_STM32H7_UART4=y
CONFIG_STM32H7_UART5=y
CONFIG_STM32H7_UART7=y
CONFIG_STM32H7_UART8=y
CONFIG_STM32H7_USART1=y
CONFIG_STM32H7_USART2=y
CONFIG_STM32H7_USART3=y
CONFIG_STM32H7_USART6=y
CONFIG_STM32H7_USART_BREAKS=y
CONFIG_STM32H7_USART_INVERT=y
CONFIG_STM32H7_USART_SINGLEWIRE=y
CONFIG_STM32H7_USART_SWAP=y
CONFIG_SYSTEM_CDCACM=y
CONFIG_SYSTEM_NSH=y
CONFIG_TASK_NAME_SIZE=24
CONFIG_UART4_BAUD=57600
CONFIG_UART4_RXBUFSIZE=600
CONFIG_UART4_TXBUFSIZE=1500
CONFIG_UART5_IFLOWCONTROL=y
CONFIG_UART5_OFLOWCONTROL=y
CONFIG_UART7_BAUD=57600
CONFIG_UART7_IFLOWCONTROL=y
CONFIG_UART7_OFLOWCONTROL=y
CONFIG_UART7_RXBUFSIZE=600
CONFIG_UART7_TXBUFSIZE=3000
CONFIG_UART8_BAUD=57600
CONFIG_UART8_RXBUFSIZE=600
CONFIG_UART8_TXBUFSIZE=1500
CONFIG_USART1_BAUD=57600
CONFIG_USART1_RXBUFSIZE=600
CONFIG_USART1_TXBUFSIZE=1500
CONFIG_USART2_BAUD=57600
CONFIG_USART2_IFLOWCONTROL=y
CONFIG_USART2_OFLOWCONTROL=y
CONFIG_USART2_RXBUFSIZE=600
CONFIG_USART2_TXBUFSIZE=3000
CONFIG_USART3_BAUD=57600
CONFIG_USART3_RXBUFSIZE=180
CONFIG_USART3_SERIAL_CONSOLE=y
CONFIG_USART3_TXBUFSIZE=1500
CONFIG_USART6_BAUD=57600
CONFIG_USART6_RXBUFSIZE=600
CONFIG_USART6_TXBUFSIZE=1500
CONFIG_USBDEV=y
CONFIG_USBDEV_BUSPOWERED=y
CONFIG_USBDEV_MAXPOWER=500
CONFIG_USEC_PER_TICK=1000
CONFIG_USERMAIN_STACKSIZE=2944
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_WATCHDOG=y
CONFIG_WQUEUE_NOTIFIER=y

215
boards/modalai/fc-v2/nuttx-config/scripts/bootloader_script.ld Normal file
View File

@ -0,0 +1,215 @@
/****************************************************************************
* scripts/script.ld
*
* Copyright (C) 2016, 2019 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The ModalAi FlightCore v2 uses an STM32H756II has 2048Kb of main FLASH memory.
* The flash memory is partitioned into a User Flash memory and a System
* Flash memory. Each of these memories has two banks:
*
* 1) User Flash memory:
*
* Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
* Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
*
* 2) System Flash memory:
*
* Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
* Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
*
* 3) User option bytes for user configuration, only in Bank 1.
*
* In the STM32H756II, two different boot spaces can be selected through
* the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
* BOOT_ADD1 option bytes:
*
* 1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
* ST programmed value: Flash memory at 0x0800:0000
* 2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
* ST programmed value: System bootloader at 0x1FF0:0000
*
* The ModalAi FlightCore v2 has a test point on board, the BOOT0 pin is at ground so by
* default, the STM32 will boot to address 0x0800:0000 in FLASH unless the test
* point is pulled to 3.3V.then the boot will be from 0x1FF0:0000
*
* The STM32H756II also has 1024Kb of data SRAM.
* SRAM is split up into several blocks and into three power domains:
*
* 1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
* 0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
*
* 1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
*
* The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
* DTCM ports. The DTCM-RAM could be used for critical real-time
* data, such as interrupt service routines or stack / heap memory.
* Both DTCM-RAMs can be used in parallel (for load/store operations)
* thanks to the Cortex-M7 dual issue capability.
*
* 1.2) 64Kb of ITCM-RAM beginning at address 0x0000:0000
*
* This RAM is connected to ITCM 64-bit interface designed for
* execution of critical real-times routines by the CPU.
*
* 2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
* through D1 domain AXI bus matrix
*
* 2.1) 512Kb of SRAM beginning at address 0x2400:0000
*
* 3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
* through D2 domain AHB bus matrix
*
* 3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
* 3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
* 3.3) 32Kb of SRAM3 beginning at address 0x3004:0000
*
* SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
*
* 4) AHB SRAM (D3 domain) accessible by most of system masters
* through D3 domain AHB bus matrix
*
* 4.1) 64Kb of SRAM4 beginning at address 0x3800:0000
* 4.1) 4Kb of backup RAM beginning at address 0x3880:0000
*
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
* where the code expects to begin execution by jumping to the entry point in
* the 0x0800:0000 address range.
*
* The bootloader uses the first sector of the flash, which is 128K in length.
*/
MEMORY
{
itcm (rwx) : ORIGIN = 0x00000000, LENGTH = 64K
flash (rx) : ORIGIN = 0x08000000, LENGTH = 128K
dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH = 64K
sram (rwx) : ORIGIN = 0x24000000, LENGTH = 512K
sram1 (rwx) : ORIGIN = 0x30000000, LENGTH = 128K
sram2 (rwx) : ORIGIN = 0x30020000, LENGTH = 128K
sram3 (rwx) : ORIGIN = 0x30040000, LENGTH = 32K
sram4 (rwx) : ORIGIN = 0x38000000, LENGTH = 64K
bbram (rwx) : ORIGIN = 0x38800000, LENGTH = 4K
}
OUTPUT_ARCH(arm)
EXTERN(_vectors)
ENTRY(_stext)
/*
* Ensure that abort() is present in the final object. The exception handling
* code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
*/
EXTERN(abort)
EXTERN(_bootdelay_signature)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
. = ALIGN(32);
/*
This signature provides the bootloader with a way to delay booting
*/
_bootdelay_signature = ABSOLUTE(.);
FILL(0xffecc2925d7d05c5)
. += 8;
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
/*
* Init functions (static constructors and the like)
*/
.init_section : {
_sinit = ABSOLUTE(.);
KEEP(*(.init_array .init_array.*))
_einit = ABSOLUTE(.);
} > flash
.ARM.extab : {
*(.ARM.extab*)
} > flash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > flash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
. = ALIGN(4);
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

223
boards/modalai/fc-v2/nuttx-config/scripts/script.ld Normal file
View File

@ -0,0 +1,223 @@
/****************************************************************************
* scripts/script.ld
*
* Copyright (C) 2016, 2019 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The ModalAi FlightCore v2 uses an STM32H756II has 2048Kb of main FLASH memory.
* The flash memory is partitioned into a User Flash memory and a System
* Flash memory. Each of these memories has two banks:
*
* 1) User Flash memory:
*
* Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
* Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
*
* 2) System Flash memory:
*
* Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
* Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
*
* 3) User option bytes for user configuration, only in Bank 1.
*
* In the STM32H756II, two different boot spaces can be selected through
* the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
* BOOT_ADD1 option bytes:
*
* 1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
* ST programmed value: Flash memory at 0x0800:0000
* 2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
* ST programmed value: System bootloader at 0x1FF0:0000
*
* The ModalAi FlightCore v2 has a test point on board, the BOOT0 pin is at ground so by
* default, the STM32 will boot to address 0x0800:0000 in FLASH unless the test
* point is pulled to 3.3V.then the boot will be from 0x1FF0:0000
*
* The STM32H756II also has 1024Kb of data SRAM.
* SRAM is split up into several blocks and into three power domains:
*
* 1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
* 0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
*
* 1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
*
* The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
* DTCM ports. The DTCM-RAM could be used for critical real-time
* data, such as interrupt service routines or stack / heap memory.
* Both DTCM-RAMs can be used in parallel (for load/store operations)
* thanks to the Cortex-M7 dual issue capability.
*
* 1.2) 64Kb of ITCM-RAM beginning at address 0x0000:0000
*
* This RAM is connected to ITCM 64-bit interface designed for
* execution of critical real-times routines by the CPU.
*
* 2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
* through D1 domain AXI bus matrix
*
* 2.1) 512Kb of SRAM beginning at address 0x2400:0000
*
* 3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
* through D2 domain AHB bus matrix
*
* 3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
* 3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
* 3.3) 32Kb of SRAM3 beginning at address 0x3004:0000
*
* SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
*
* 4) AHB SRAM (D3 domain) accessible by most of system masters
* through D3 domain AHB bus matrix
*
* 4.1) 64Kb of SRAM4 beginning at address 0x3800:0000
* 4.1) 4Kb of backup RAM beginning at address 0x3880:0000
*
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
* where the code expects to begin execution by jumping to the entry point in
* the 0x0800:0000 address range.
*/
MEMORY
{
itcm (rwx) : ORIGIN = 0x00000000, LENGTH = 64K
flash (rx) : ORIGIN = 0x08020000, LENGTH = 1920K
dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH = 64K
sram (rwx) : ORIGIN = 0x24000000, LENGTH = 512K
sram1 (rwx) : ORIGIN = 0x30000000, LENGTH = 128K
sram2 (rwx) : ORIGIN = 0x30020000, LENGTH = 128K
sram3 (rwx) : ORIGIN = 0x30040000, LENGTH = 32K
sram4 (rwx) : ORIGIN = 0x38000000, LENGTH = 64K
bbram (rwx) : ORIGIN = 0x38800000, LENGTH = 4K
}
OUTPUT_ARCH(arm)
EXTERN(_vectors)
ENTRY(_stext)
/*
* Ensure that abort() is present in the final object. The exception handling
* code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
*/
EXTERN(abort)
EXTERN(_bootdelay_signature)
EXTERN(board_get_manifest)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
. = ALIGN(32);
/*
This signature provides the bootloader with a way to delay booting
*/
_bootdelay_signature = ABSOLUTE(.);
FILL(0xffecc2925d7d05c5)
. += 8;
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
/*
* Init functions (static constructors and the like)
*/
.init_section : {
_sinit = ABSOLUTE(.);
KEEP(*(.init_array .init_array.*))
_einit = ABSOLUTE(.);
} > flash
.ARM.extab : {
*(.ARM.extab*)
} > flash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > flash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
. = ALIGN(4);
_ebss = ABSOLUTE(.);
} > sram
/* Emit the the D3 power domain section for locating BDMA data */
.sram4_reserve (NOLOAD) :
{
*(.sram4)
. = ALIGN(4);
_sram4_heap_start = ABSOLUTE(.);
} > sram4
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

70
boards/modalai/fc-v2/src/CMakeLists.txt Normal file
View File

@ -0,0 +1,70 @@
############################################################################
#
# Copyright (c) 2016 PX4 Development Team. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name PX4 nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
if("${PX4_BOARD_LABEL}" STREQUAL "bootloader")
add_library(drivers_board
bootloader_main.c
usb.c
)
target_link_libraries(drivers_board
PRIVATE
nuttx_arch # sdio
nuttx_drivers # sdio
bootloader
)
target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader/common)
else()
add_library(drivers_board
can.c
i2c.cpp
init.c
led.c
mtd.cpp
manifest.c
sdio.c
spi.cpp
timer_config.cpp
usb.c
)
add_dependencies(drivers_board arch_board_hw_info)
target_link_libraries(drivers_board
PRIVATE
arch_spi
arch_board_hw_info
drivers__led # drv_led_start
nuttx_arch # sdio
nuttx_drivers # sdio
px4_layer
)
endif()

400
boards/modalai/fc-v2/src/board_config.h Normal file
View File

@ -0,0 +1,400 @@
/****************************************************************************
*
* Copyright (c) 2016, 2020 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file board_config.h
*
* ModalAI FC v2 internal definitions
*/
#pragma once
/****************************************************************************************************
* Included Files
****************************************************************************************************/
#include <px4_platform_common/px4_config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
#include <stm32_gpio.h>
/****************************************************************************************************
* Definitions
****************************************************************************************************/
/* PX4IO connection configuration */
#define BOARD_USES_PX4IO_VERSION 2
#define PX4IO_SERIAL_DEVICE "/dev/ttyS5"
#define PX4IO_SERIAL_TX_GPIO GPIO_USART6_TX
#define PX4IO_SERIAL_RX_GPIO GPIO_USART6_RX
#define PX4IO_SERIAL_BASE STM32_USART6_BASE
#define PX4IO_SERIAL_VECTOR STM32_IRQ_USART6
#define PX4IO_SERIAL_TX_DMAMAP DMAMAP_USART6_TX
#define PX4IO_SERIAL_RX_DMAMAP DMAMAP_USART6_RX
#define PX4IO_SERIAL_RCC_REG STM32_RCC_APB2ENR
#define PX4IO_SERIAL_RCC_EN RCC_APB2ENR_USART6EN
#define PX4IO_SERIAL_CLOCK STM32_PCLK2_FREQUENCY
#define PX4IO_SERIAL_BITRATE 1500000 /* 1.5Mbps -> max rate for IO */
/* Configuration ************************************************************************************/
/* PX4FMU GPIOs ***********************************************************************************/
/* Trace Clock and D0-D3 are available on the trace connector
*
* TRACECLK PE2 - Dedicated - Trace Connector Pin 1
* TRACED0 PE3 - nLED_RED - Trace Connector Pin 3
* TRACED1 PE4 - nLED_GREEN - Trace Connector Pin 5
* TRACED2 PE5 - nLED_BLUE - Trace Connector Pin 7
* TRACED3 PC12 - UART5_TX_TELEM2 - Trace Connector Pin 8
*/
#undef TRACE_PINS
/* LEDs are driven with push open drain to support Anode to 5V or 3.3V or used as TRACE0-2 */
#if !defined(TRACE_PINS)
# define GPIO_nLED_RED /* PE3 */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
# define GPIO_nLED_GREEN /* PE4 */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN4)
# define GPIO_nLED_BLUE /* PE5 */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN5)
# define BOARD_HAS_CONTROL_STATUS_LEDS 1
# define BOARD_OVERLOAD_LED LED_RED
# define BOARD_ARMED_STATE_LED LED_BLUE
#else
# if defined(CONFIG_STM32H7_UART5) && (GPIO_UART5_TX == GPIO_UART5_TX_3)
# error Need to disable CONFIG_STM32H7_UART5 for Trace 3 (Retarget to CAN2 if need be)
# endif
#endif
/* SPI */
#define GPIO_SPI4_MAG_INT /* PD12 */ (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTD|GPIO_PIN12)
#define GPIO_SYNC /* PE9 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_100MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN9)
/* I2C busses */
/* Devices on the onboard buses.
*
* Note that these are unshifted addresses.
*/
#define PX4_I2C_OBDEV_BMP388 0x76
#define GPIO_I2C4_DRDY1_BMP388 /* PG5 */ (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTG|GPIO_PIN5)
/*
* ADC channels
*
* These are the channel numbers of the ADCs of the microcontroller that
* can be used by the Px4 Firmware in the adc driver
*/
/* ADC defines to be used in sensors.cpp to read from a particular channel */
#define ADC1_CH(n) (n)
/* N.B. there is no offset mapping needed for ADC3 because */
#define ADC3_CH(n) (n)
/* We are only use ADC3 for REV/VER.
* ADC3_6V6 and ADC3_3V3 are mapped back to ADC1
* To do this We are relying on PC2_C, PC3_C being connected to PC2, PC3
* respectively by the SYSCFG_PMCR default of setting for PC3SO PC2SO PA1SO
* PA0SO of 0.
*
* 0 Analog switch closed (pads are connected through the analog switch)
*
* So ADC3_INP0 is GPIO_ADC123_INP12
* ADC3_INP1 is GPIO_ADC12_INP13
*/
/* Define GPIO pins used as ADC N.B. Channel numbers must match below */
#define PX4_ADC_GPIO \
/* PB1 */ GPIO_ADC12_INP5, \
/* PC2 */ GPIO_ADC123_INP12, \
/* PC3 */ GPIO_ADC12_INP13, \
/* PH3 */ GPIO_ADC3_INP14, \
/* PH4 */ GPIO_ADC3_INP15
/* Define Channel numbers must match above GPIO pin IN(n)*/
#define ADC_SCALED_V5_CHANNEL /* PB1 */ ADC1_CH(5)
#define ADC_ADC3_6V6_CHANNEL /* PC2 */ ADC3_CH(12)
#define ADC_ADC3_3V3_CHANNEL /* PC3 */ ADC3_CH(13)
#define ADC_HW_VER_SENSE_CHANNEL /* PH3 */ ADC3_CH(14)
#define ADC_HW_REV_SENSE_CHANNEL /* PH4 */ ADC3_CH(15)
#define ADC_CHANNELS \
((1 << ADC_SCALED_V5_CHANNEL) | \
(1 << ADC_ADC3_6V6_CHANNEL) | \
(1 << ADC_ADC3_3V3_CHANNEL))
/* HW has to large of R termination on ADC todo:change when HW value is chosen */
#define HW_REV_VER_ADC_BASE STM32_ADC3_BASE
#define SYSTEM_ADC_BASE STM32_ADC1_BASE
/* Define Battery 1 Voltage Divider and A per V
*/
#define BOARD_BATTERY1_V_DIV (18.1f) /* measured with the provided PM board */
#define BOARD_BATTERY1_A_PER_V (36.367515152f)
/* HW has to large of R termination on ADC todo:change when HW value is chosen */
#define BOARD_ADC_OPEN_CIRCUIT_V (5.6f)
/* HW Version and Revision drive signals Default to 1 to detect */
#define BOARD_HAS_HW_VERSIONING
#define GPIO_HW_VER_REV_DRIVE /* PG0 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTG|GPIO_PIN0)
#define GPIO_HW_REV_SENSE /* PH4 */ GPIO_ADC3_INP15
#define GPIO_HW_VER_SENSE /* PH3 */ GPIO_ADC3_INP14
#define HW_INFO_INIT {'V','2','x', 'x',0}
#define HW_INFO_INIT_VER 3 /* Offset in above string of the VER */
#define HW_INFO_INIT_REV 4 /* Offset in above string of the REV */
/* PWM Capture - not routed
*/
#define DIRECT_PWM_CAPTURE_CHANNELS 0
/* PE6 is nARMED --> FCv2 this goes to TP13
* The GPIO will be set as input while not armed HW will have external HW Pull UP.
* While armed it shall be configured at a GPIO OUT set LOW
*/
#define GPIO_nARMED_INIT /* PE6 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN6)
#define GPIO_nARMED /* PE6 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN6)
#define BOARD_INDICATE_ARMED_STATE(enabled) px4_arch_configgpio((enabled) ? GPIO_nARMED : GPIO_nARMED_INIT)
/* PWM
*/
#define DIRECT_PWM_OUTPUT_CHANNELS 8
#define DIRECT_INPUT_TIMER_CHANNELS 8
#define BOARD_DSHOT_MOTOR_ASSIGNMENT {3, 2, 1, 0, 4, 5, 6, 7};
/* Power supply control and monitoring GPIOs */
#define GPIO_nVDD_USB_VALID /* PF13 */ (GPIO_INPUT |GPIO_FLOAT|GPIO_PORTF|GPIO_PIN13) /* Low for USB power, High for DC power */
#define GPIO_VDD_3V3_SPEKTRUM_POWER_EN /* PH2 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN2)
/* Spare GPIO */
#define CAN1_SILENT /* PD15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN15)
/* Define True logic Power Control in arch agnostic form */
#define VDD_3V3_SPEKTRUM_POWER_EN(on_true) px4_arch_gpiowrite(GPIO_VDD_3V3_SPEKTRUM_POWER_EN, (on_true))
#define READ_VDD_3V3_SPEKTRUM_POWER_EN() px4_arch_gpioread(GPIO_VDD_3V3_SPEKTRUM_POWER_EN)
/* Future Use - IMU FSYNC */
#define IMU_FYSNC_TIMER 14 /* Timer 14 */
#define IMU_FYSNC_CHANNEL 1 /* PF9 GPIO_TIM14_CH1OUT_2 */
#define GPIO_IMU_FYSNC_1 /* PF9 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN9)
#define GPIO_IMU_FYSNC_IDLE GPIO_IMU_FYSNC_1
#define GPIO_IMU_FYSNC GPIO_TIM14_CH1OUT_2
/* USB OTG FS
*
* PA9 OTG_FS_VBUS VBUS sensing
*/
#define GPIO_OTGFS_VBUS /* PA9 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_100MHz|GPIO_PORTA|GPIO_PIN9)
/* High-resolution timer */
#define HRT_TIMER 8 /* use timer8 for the HRT */
#define HRT_TIMER_CHANNEL 3 /* use capture/compare channel 3 */
//#define HRT_PPM_CHANNEL /* T8C1 */ 1 /* use capture/compare channel 1 */
//#define GPIO_PPM_IN /* PI5 T8C1 */ GPIO_TIM8_CH1IN_2
/* RC Serial port */
#define RC_SERIAL_PORT "/dev/ttyS5"
/* Input Capture Channels. */
#define INPUT_CAP1_TIMER 1
#define INPUT_CAP1_CHANNEL /* T1C2 */ 2
#define GPIO_INPUT_CAP1 /* PE11 */ GPIO_TIM1_CH2IN
/* PWM input driver. Use FMU AUX5 pins attached to timer4 channel 2 */
#define PWMIN_TIMER 4
#define PWMIN_TIMER_CHANNEL /* T4C2 */ 2
#define GPIO_PWM_IN /* PD13 */ GPIO_TIM4_CH2IN_2
/* Power switch controls ******************************************************/
#define SPEKTRUM_POWER(_on_true) VDD_3V3_SPEKTRUM_POWER_EN(_on_true)
/*
* ModalAI FC v2 has NO separate RC_IN
*
* SPEKTRUM_RX (it's TX or RX in Bind) on UART6 PC7
* Inversion is possible in the UART
*/
#define SPEKTRUM_RX_AS_OUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN7)
#define SPEKTRUM_RX_AS_GPIO_OUTPUT() px4_arch_configgpio(SPEKTRUM_RX_AS_OUT)
#define SPEKTRUM_RX_AS_UART() /* Can be left as uart */
#define SPEKTRUM_OUT(_one_true) px4_arch_gpiowrite(SPEKTRUM_RX_AS_OUT, (_one_true))
#define SDIO_SLOTNO 0 /* Only one slot */
#define SDIO_MINOR 0
/* SD card bringup does not work if performed on the IDLE thread because it
* will cause waiting. Use either:
*
* CONFIG_LIB_BOARDCTL=y, OR
* CONFIG_BOARD_INITIALIZE=y && CONFIG_BOARD_INITTHREAD=y
*/
#if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_LIB_BOARDCTL) && \
!defined(CONFIG_BOARD_INITTHREAD)
# warning SDIO initialization cannot be perfomed on the IDLE thread
#endif
/* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
* this board support the ADC system_power interface, and therefore
* provides the true logic GPIO BOARD_ADC_xxxx macros.
*/
#define BOARD_ADC_USB_CONNECTED (px4_arch_gpioread(GPIO_OTGFS_VBUS))
#define BOARD_ADC_USB_VALID (!px4_arch_gpioread(GPIO_nVDD_USB_VALID))
/* ModalAI FC v2 never powers off the Servo rail */
#define BOARD_ADC_SERVO_VALID (1)
#if !defined(BOARD_HAS_LTC44XX_VALIDS) || BOARD_HAS_LTC44XX_VALIDS == 0
# define BOARD_ADC_BRICK1_VALID (1)
# define BOARD_ADC_BRICK2_VALID (0)
#elif BOARD_HAS_LTC44XX_VALIDS == 1
# define BOARD_ADC_BRICK1_VALID (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
# define BOARD_ADC_BRICK2_VALID (0)
#elif BOARD_HAS_LTC44XX_VALIDS == 2
# define BOARD_ADC_BRICK1_VALID (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
# define BOARD_ADC_BRICK2_VALID (!px4_arch_gpioread(GPIO_nVDD_BRICK2_VALID))
#elif BOARD_HAS_LTC44XX_VALIDS == 3
# define BOARD_ADC_BRICK1_VALID (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
# define BOARD_ADC_BRICK2_VALID (!px4_arch_gpioread(GPIO_nVDD_BRICK2_VALID))
# define BOARD_ADC_BRICK3_VALID (!px4_arch_gpioread(GPIO_nVDD_BRICK3_VALID))
#elif BOARD_HAS_LTC44XX_VALIDS == 4
# define BOARD_ADC_BRICK1_VALID (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
# define BOARD_ADC_BRICK2_VALID (!px4_arch_gpioread(GPIO_nVDD_BRICK2_VALID))
# define BOARD_ADC_BRICK3_VALID (!px4_arch_gpioread(GPIO_nVDD_BRICK3_VALID))
# define BOARD_ADC_BRICK4_VALID (!px4_arch_gpioread(GPIO_nVDD_BRICK4_VALID))
#else
# error Unsupported BOARD_HAS_LTC44XX_VALIDS value
#endif
#define BOARD_HAS_PWM DIRECT_PWM_OUTPUT_CHANNELS
/* This board provides a DMA pool and APIs */
#define BOARD_DMA_ALLOC_POOL_SIZE 5120
/* This board provides the board_on_reset interface */
#define BOARD_HAS_ON_RESET 1
#define PX4_GPIO_INIT_LIST { \
PX4_ADC_GPIO, \
GPIO_HW_VER_REV_DRIVE, \
GPIO_CAN1_TX, \
GPIO_CAN1_RX, \
GPIO_VDD_3V3_SPEKTRUM_POWER_EN, \
CAN1_SILENT, \
GPIO_SYNC, \
GPIO_IMU_FYSNC_IDLE, \
GPIO_IMU_FYSNC, \
}
#define BOARD_ENABLE_CONSOLE_BUFFER
#define BOARD_NUM_IO_TIMERS 5
__BEGIN_DECLS
/****************************************************************************************************
* Public Types
****************************************************************************************************/
/****************************************************************************************************
* Public data
****************************************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************************************
* Public Functions
****************************************************************************************************/
/****************************************************************************
* Name: stm32_sdio_initialize
*
* Description:
* Initialize SDIO-based MMC/SD card support
*
****************************************************************************/
int stm32_sdio_initialize(void);
/****************************************************************************************************
* Name: stm32_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the PX4FMU board.
*
****************************************************************************************************/
extern void stm32_spiinitialize(void);
extern void stm32_usbinitialize(void);
extern void board_peripheral_reset(int ms);
#include <px4_platform_common/board_common.h>
#endif /* __ASSEMBLY__ */
__END_DECLS

76
boards/modalai/fc-v2/src/bootloader_main.c Normal file
View File

@ -0,0 +1,76 @@
/****************************************************************************
*
* Copyright (c) 2019 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file bootloader_main.c
*
* FMU-specific early startup code for bootloader
*/
#include "board_config.h"
#include "bl.h"
#include <nuttx/config.h>
#include <nuttx/board.h>
#include <chip.h>
#include <stm32_uart.h>
#include <arch/board/board.h>
#include "arm_internal.h"
#include <px4_platform_common/init.h>
extern int sercon_main(int c, char **argv);
__EXPORT void board_on_reset(int status) {}
__EXPORT void stm32_boardinitialize(void)
{
/* configure USB interfaces */
stm32_usbinitialize();
}
__EXPORT int board_app_initialize(uintptr_t arg)
{
return 0;
}
void board_late_initialize(void)
{
px4_platform_console_init();
sercon_main(0, NULL);
}
extern void sys_tick_handler(void);
void board_timerhook(void)
{
sys_tick_handler();
}

128
boards/modalai/fc-v2/src/can.c Normal file
View File

@ -0,0 +1,128 @@
/****************************************************************************
*
* Copyright (C) 2021 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file px4fmu_can.c
*
* Board-specific CAN functions.
*/
#ifdef CONFIG_CAN
#include <errno.h>
#include <debug.h>
#include <nuttx/can/can.h>
#include <arch/board/board.h>
#include "chip.h"
#include "arm_arch.h"
#include "chip.h"
#include "stm32_can.h"
#include "board_config.h"
#ifdef CONFIG_CAN
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Configuration ********************************************************************/
#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
# warning "Both CAN1 and CAN2 are enabled. Assuming only CAN1."
# undef CONFIG_STM32_CAN2
#endif
#ifdef CONFIG_STM32_CAN1
# define CAN_PORT 1
#else
# define CAN_PORT 2
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
int can_devinit(void);
/************************************************************************************
* Name: can_devinit
*
* Description:
* All STM32 architectures must provide the following interface to work with
* examples/can.
*
************************************************************************************/
int can_devinit(void)
{
static bool initialized = false;
struct can_dev_s *can;
int ret;
/* Check if we have already initialized */
if (!initialized) {
/* Call stm32_caninitialize() to get an instance of the CAN interface */
can = stm32_caninitialize(CAN_PORT);
if (can == NULL) {
canerr("ERROR: Failed to get CAN interface\n");
return -ENODEV;
}
/* Register the CAN driver at "/dev/can0" */
ret = can_register("/dev/can0", can);
if (ret < 0) {
canerr("ERROR: can_register failed: %d\n", ret);
return ret;
}
/* Now we are initialized */
initialized = true;
}
return OK;
}
#endif
#endif /* CONFIG_CAN */

128
boards/modalai/fc-v2/src/hw_config.h Normal file
View File

@ -0,0 +1,128 @@
/*
* hw_config.h
*
* Created on: May 17, 2015
* Author: david_s5
*/
#ifndef HW_CONFIG_H_
#define HW_CONFIG_H_
/****************************************************************************
* 10-8--2016:
* To simplify the ripple effect on the tools, we will be using
* /dev/serial/by-id/<asterisk>PX4<asterisk> to locate PX4 devices. Therefore
* moving forward all Bootloaders must contain the prefix "PX4 BL "
* in the USBDEVICESTRING
* This Change will be made in an upcoming BL release
****************************************************************************/
/*
* Define usage to configure a bootloader
*
*
* Constant example Usage
* APP_LOAD_ADDRESS 0x08004000 - The address in Linker Script, where the app fw is org-ed
* BOOTLOADER_DELAY 5000 - Ms to wait while under USB pwr or bootloader request
* BOARD_FMUV2
* INTERFACE_USB 1 - (Optional) Scan and use the USB interface for bootloading
* INTERFACE_USART 1 - (Optional) Scan and use the Serial interface for bootloading
* USBDEVICESTRING "PX4 BL FMU v2.x" - USB id string
* USBPRODUCTID 0x0011 - PID Should match defconfig
* BOOT_DELAY_ADDRESS 0x000001a0 - (Optional) From the linker script from Linker Script to get a custom
* delay provided by an APP FW
* BOARD_TYPE 9 - Must match .prototype boad_id
* _FLASH_KBYTES (*(uint16_t *)0x1fff7a22) - Run time flash size detection
* BOARD_FLASH_SECTORS ((_FLASH_KBYTES == 0x400) ? 11 : 23) - Run time determine the physical last sector
* BOARD_FLASH_SECTORS 11 - Hard coded zero based last sector
* BOARD_FLASH_SIZE (_FLASH_KBYTES*1024)- Total Flash size of device, determined at run time.
* (1024 * 1024) - Hard coded Total Flash of device - The bootloader and app reserved will be deducted
* programmatically
*
* BOARD_FIRST_FLASH_SECTOR_TO_ERASE 2 - Optional sectors index in the flash_sectors table (F4 only), to begin erasing.
* This is to allow sectors to be reserved for app fw usage. That will NOT be erased
* during a FW upgrade.
* The default is 0, and selects the first sector to be erased, as the 0th entry in the
* flash_sectors table. Which is the second physical sector of FLASH in the device.
* The first physical sector of FLASH is used by the bootloader, and is not defined
* in the table.
*
* APP_RESERVATION_SIZE (BOARD_FIRST_FLASH_SECTOR_TO_ERASE * 16 * 1024) - Number of bytes reserved by the APP FW. This number plus
* BOOTLOADER_RESERVATION_SIZE will be deducted from
* BOARD_FLASH_SIZE to determine the size of the App FW
* and hence the address space of FLASH to erase and program.
* USBMFGSTRING "PX4 AP" - Optional USB MFG string (default is '3D Robotics' if not defined.)
* SERIAL_BREAK_DETECT_DISABLED - Optional prevent break selection on Serial port from entering or staying in BL
*
* * Other defines are somewhat self explanatory.
*/
/* Boot device selection list*/
#define USB0_DEV 0x01
#define SERIAL0_DEV 0x02
#define SERIAL1_DEV 0x04
#define APP_LOAD_ADDRESS 0x08020000
#define BOOTLOADER_DELAY 5000
#define INTERFACE_USB 1
#define INTERFACE_USB_CONFIG "/dev/ttyACM0"
#define BOARD_VBUS MK_GPIO_INPUT(GPIO_OTGFS_VBUS)
//#define USE_VBUS_PULL_DOWN
#define INTERFACE_USART 1
#define INTERFACE_USART_CONFIG "/dev/ttyS0,115200"
#define BOOT_DELAY_ADDRESS 0x000001a0
#define BOARD_TYPE 53
#define _FLASH_KBYTES (*(uint32_t *)0x1FF1E880)
#define BOARD_FLASH_SECTORS (15)
#define BOARD_FLASH_SIZE (_FLASH_KBYTES * 1024)
#define OSC_FREQ 16
#define BOARD_PIN_LED_ACTIVITY GPIO_nLED_BLUE // BLUE
#define BOARD_PIN_LED_BOOTLOADER GPIO_nLED_GREEN // GREEN
#define BOARD_LED_ON 0
#define BOARD_LED_OFF 1
#define SERIAL_BREAK_DETECT_DISABLED 1
/*
* Uncommenting this allows to force the bootloader through
* a PWM output pin. As this can accidentally initialize
* an ESC prematurely, it is not recommended. This feature
* has not been used and hence defaults now to off.
*
* # define BOARD_FORCE_BL_PIN_OUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN14)
* # define BOARD_FORCE_BL_PIN_IN (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN11)
*
* # define BOARD_POWER_PIN_OUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4)
* # define BOARD_POWER_ON 1
* # define BOARD_POWER_OFF 0
* # undef BOARD_POWER_PIN_RELEASE // Leave pin enabling Power - un comment to release (disable power)
*
*/
#if !defined(ARCH_SN_MAX_LENGTH)
# define ARCH_SN_MAX_LENGTH 12
#endif
#if !defined(APP_RESERVATION_SIZE)
# define APP_RESERVATION_SIZE 0
#endif
#if !defined(BOARD_FIRST_FLASH_SECTOR_TO_ERASE)
# define BOARD_FIRST_FLASH_SECTOR_TO_ERASE 1
#endif
#if !defined(USB_DATA_ALIGN)
# define USB_DATA_ALIGN
#endif
#ifndef BOOT_DEVICES_SELECTION
# define BOOT_DEVICES_SELECTION USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
#endif
#ifndef BOOT_DEVICES_FILTER_ONUSB
# define BOOT_DEVICES_FILTER_ONUSB USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
#endif
#endif /* HW_CONFIG_H_ */

41
boards/modalai/fc-v2/src/i2c.cpp Normal file
View File

@ -0,0 +1,41 @@
/****************************************************************************
*
* Copyright (C) 2020 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include <px4_arch/i2c_hw_description.h>
constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
initI2CBusExternal(1), // External GPS/Mag, suggested
initI2CBusExternal(2), // External Aviator
initI2CBusExternal(3), // External VOXL PM
initI2CBusInternal(4), // Internal Barometer, Internal Mag
};

278
boards/modalai/fc-v2/src/init.c Normal file
View File

@ -0,0 +1,278 @@
/****************************************************************************
*
* Copyright (c) 2012-2021 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file init.c
*
* PX4FMU-specific early startup code. This file implements the
* board_app_initialize() function that is called early by nsh during startup.
*
* Code here is run before the rcS script is invoked; it should start required
* subsystems and perform board-specific initialization.
*/
/****************************************************************************
* Included Files
****************************************************************************/
#include "board_config.h"
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/config.h>
#include <nuttx/board.h>
#include <nuttx/spi/spi.h>
#include <nuttx/sdio.h>
#include <nuttx/mmcsd.h>
#include <nuttx/analog/adc.h>
#include <nuttx/mm/gran.h>
#include <chip.h>
#include <stm32_uart.h>
#include <arch/board/board.h>
#include "arm_internal.h"
#include <drivers/drv_hrt.h>
#include <drivers/drv_board_led.h>
#include <systemlib/px4_macros.h>
#include <px4_arch/io_timer.h>
#include <px4_platform_common/init.h>
#include <px4_platform/gpio.h>
#include <px4_platform/board_determine_hw_info.h>
#include <px4_platform/board_dma_alloc.h>
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/*
* Ideally we'd be able to get these from arm_internal.h,
* but since we want to be able to disable the NuttX use
* of leds for system indication at will and there is no
* separate switch, we need to build independent of the
* CONFIG_ARCH_LEDS configuration switch.
*/
__BEGIN_DECLS
extern void led_init(void);
extern void led_on(int led);
extern void led_off(int led);
__END_DECLS
/************************************************************************************
* Name: board_peripheral_reset
*
* Description:
*
************************************************************************************/
__EXPORT void board_peripheral_reset(int ms)
{
/* set the peripheral rails off */
board_control_spi_sensors_power(false, 0xffff);
bool last = READ_VDD_3V3_SPEKTRUM_POWER_EN();
/* Keep Spektum on to discharge rail*/
VDD_3V3_SPEKTRUM_POWER_EN(false);
/* wait for the peripheral rail to reach GND */
usleep(ms * 1000);
syslog(LOG_DEBUG, "reset done, %d ms\n", ms);
/* re-enable power */
/* switch the peripheral rail back on */
VDD_3V3_SPEKTRUM_POWER_EN(last);
board_control_spi_sensors_power(true, 0xffff);
}
/************************************************************************************
* Name: board_on_reset
*
* Description:
* Optionally provided function called on entry to board_system_reset
* It should perform any house keeping prior to the rest.
*
* status - 1 if resetting to boot loader
* 0 if just resetting
*
************************************************************************************/
__EXPORT void board_on_reset(int status)
{
for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
px4_arch_configgpio(PX4_MAKE_GPIO_INPUT_PULL_DOWN(io_timer_channel_get_as_pwm_input(i)));
}
if (status >= 0) {
up_mdelay(6);
}
}
/************************************************************************************
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the initialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
__EXPORT void
stm32_boardinitialize(void)
{
board_on_reset(-1); /* Reset PWM first thing */
/* configure LEDs */
board_autoled_initialize();
/* configure pins */
const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
px4_gpio_init(gpio, arraySize(gpio));
/* configure SPI interfaces (we can do this here as long as we only have a single SPI hw config version -
* otherwise we need to move this after board_determine_hw_info()) */
_Static_assert(BOARD_NUM_SPI_CFG_HW_VERSIONS == 1, "Need to move the SPI initialization for multi-version support");
stm32_spiinitialize();
/* configure USB interfaces */
stm32_usbinitialize();
}
/****************************************************************************
* Name: board_app_initialize
*
* Description:
* Perform application specific initialization. This function is never
* called directly from application code, but only indirectly via the
* (non-standard) boardctl() interface using the command BOARDIOC_INIT.
*
* Input Parameters:
* arg - The boardctl() argument is passed to the board_app_initialize()
* implementation without modification. The argument has no
* meaning to NuttX; the meaning of the argument is a contract
* between the board-specific initalization logic and the the
* matching application logic. The value cold be such things as a
* mode enumeration value, a set of DIP switch switch settings, a
* pointer to configuration data read from a file or serial FLASH,
* or whatever you would like to do with it. Every implementation
* should accept zero/NULL as a default configuration.
*
* Returned Value:
* Zero (OK) is returned on success; a negated errno value is returned on
* any failure to indicate the nature of the failure.
*
****************************************************************************/
__EXPORT int board_app_initialize(uintptr_t arg)
{
/* Power on Interfaces */
board_spi_reset(10, 0xffff);
VDD_3V3_SPEKTRUM_POWER_EN(true);
/* Need hrt running before using the ADC */
px4_platform_init();
if (OK == board_determine_hw_info()) {
syslog(LOG_INFO, "[boot] Rev 0x%1x : Ver 0x%1x %s\n", board_get_hw_revision(), board_get_hw_version(),
board_get_hw_type_name());
} else {
syslog(LOG_ERR, "[boot] Failed to read HW revision and version\n");
}
/* configure the DMA allocator */
if (board_dma_alloc_init() < 0) {
syslog(LOG_ERR, "[boot] DMA alloc FAILED\n");
}
#if 0 // serial DMA is not yet implemented in NuttX for stm32h7
/* set up the serial DMA polling */
static struct hrt_call serial_dma_call;
struct timespec ts;
/*
* Poll at 1ms intervals for received bytes that have not triggered
* a DMA event.
*/
ts.tv_sec = 0;
ts.tv_nsec = 1000000;
hrt_call_every(&serial_dma_call,
ts_to_abstime(&ts),
ts_to_abstime(&ts),
(hrt_callout)stm32_serial_dma_poll,
NULL);
#endif
/* initial LED state */
drv_led_start();
led_off(LED_RED);
led_on(LED_GREEN); // Indicate Power.
led_off(LED_BLUE);
if (board_hardfault_init(2, true) != 0) {
led_on(LED_RED);
}
#ifdef CONFIG_MMCSD
int ret = stm32_sdio_initialize();
if (ret != OK) {
led_on(LED_RED);
return ret;
}
#endif /* CONFIG_MMCSD */
/* Configure the HW based on the manifest */
px4_platform_configure();
return OK;
}

235
boards/modalai/fc-v2/src/led.c Normal file
View File

@ -0,0 +1,235 @@
/****************************************************************************
*
* Copyright (c) 2013 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file px4fmu2_led.c
*
* PX4FMU LED backend.
*/
#include <px4_platform_common/px4_config.h>
#include <stdbool.h>
#include "chip.h"
#include "stm32_gpio.h"
#include "board_config.h"
#include <nuttx/board.h>
#include <arch/board/board.h>
/*
* Ideally we'd be able to get these from arm_internal.h,
* but since we want to be able to disable the NuttX use
* of leds for system indication at will and there is no
* separate switch, we need to build independent of the
* CONFIG_ARCH_LEDS configuration switch.
*/
__BEGIN_DECLS
extern void led_init(void);
extern void led_on(int led);
extern void led_off(int led);
extern void led_toggle(int led);
__END_DECLS
#ifdef CONFIG_ARCH_LEDS
static bool nuttx_owns_leds = true;
// B R S G
// 0 1 2 3
static const uint8_t xlatpx4[] = {1, 2, 4, 0};
# define xlat(p) xlatpx4[(p)]
static uint32_t g_ledmap[] = {
GPIO_nLED_GREEN, // Indexed by BOARD_LED_GREEN
GPIO_nLED_BLUE, // Indexed by BOARD_LED_BLUE
GPIO_nLED_RED, // Indexed by BOARD_LED_RED
GPIO_nSAFETY_SWITCH_LED_OUT, // Indexed by LED_SAFETY by xlatpx4
};
#else
# define xlat(p) (p)
static uint32_t g_ledmap[] = {
GPIO_nLED_BLUE, // Indexed by LED_BLUE
GPIO_nLED_RED, // Indexed by LED_RED, LED_AMBER
0, // Indexed by LED_SAFETY (defaulted to an input)
GPIO_nLED_GREEN, // Indexed by LED_GREEN
};
#endif
__EXPORT void led_init(void)
{
for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
if (g_ledmap[l] != 0) {
stm32_configgpio(g_ledmap[l]);
}
}
}
static void phy_set_led(int led, bool state)
{
/* Drive Low to switch on */
if (g_ledmap[led] != 0) {
stm32_gpiowrite(g_ledmap[led], !state);
}
}
static bool phy_get_led(int led)
{
/* If Low it is on */
if (g_ledmap[led] != 0) {
return !stm32_gpioread(g_ledmap[led]);
}
return false;
}
__EXPORT void led_on(int led)
{
phy_set_led(xlat(led), true);
}
__EXPORT void led_off(int led)
{
phy_set_led(xlat(led), false);
}
__EXPORT void led_toggle(int led)
{
phy_set_led(xlat(led), !phy_get_led(xlat(led)));
}
#ifdef CONFIG_ARCH_LEDS
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: board_autoled_initialize
****************************************************************************/
void board_autoled_initialize(void)
{
led_init();
}
/****************************************************************************
* Name: board_autoled_on
****************************************************************************/
void board_autoled_on(int led)
{
if (!nuttx_owns_leds) {
return;
}
switch (led) {
default:
break;
case LED_HEAPALLOCATE:
phy_set_led(BOARD_LED_BLUE, true);
break;
case LED_IRQSENABLED:
phy_set_led(BOARD_LED_BLUE, false);
phy_set_led(BOARD_LED_GREEN, true);
break;
case LED_STACKCREATED:
phy_set_led(BOARD_LED_GREEN, true);
phy_set_led(BOARD_LED_BLUE, true);
break;
case LED_INIRQ:
phy_set_led(BOARD_LED_BLUE, true);
break;
case LED_SIGNAL:
phy_set_led(BOARD_LED_GREEN, true);
break;
case LED_ASSERTION:
phy_set_led(BOARD_LED_RED, true);
phy_set_led(BOARD_LED_BLUE, true);
break;
case LED_PANIC:
phy_set_led(BOARD_LED_RED, true);
break;
case LED_IDLE : /* IDLE */
phy_set_led(BOARD_LED_RED, true);
break;
}
}
/****************************************************************************
* Name: board_autoled_off
****************************************************************************/
void board_autoled_off(int led)
{
if (!nuttx_owns_leds) {
return;
}
switch (led) {
default:
break;
case LED_SIGNAL:
phy_set_led(BOARD_LED_GREEN, false);
break;
case LED_INIRQ:
phy_set_led(BOARD_LED_BLUE, false);
break;
case LED_ASSERTION:
phy_set_led(BOARD_LED_RED, false);
phy_set_led(BOARD_LED_BLUE, false);
break;
case LED_PANIC:
phy_set_led(BOARD_LED_RED, false);
break;
case LED_IDLE : /* IDLE */
phy_set_led(BOARD_LED_RED, false);
break;
}
}
#endif /* CONFIG_ARCH_LEDS */

130
boards/modalai/fc-v2/src/manifest.c Normal file
View File

@ -0,0 +1,130 @@
/****************************************************************************
*
* Copyright (c) 2018 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file manifest.c
*
* This module supplies the interface to the manifest of hardware that is
* optional and dependent on the HW REV and HW VER IDs
*
* The manifest allows the system to know whether a hardware option
* say for example the PX4IO is an no-pop option vs it is broken.
*
*/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <board_config.h>
#include <stdbool.h>
#include "systemlib/px4_macros.h"
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
typedef struct {
uint32_t hw_ver_rev; /* the version and revision */
const px4_hw_mft_item_t *mft; /* The first entry */
uint32_t entries; /* the lenght of the list */
} px4_hw_mft_list_entry_t;
typedef px4_hw_mft_list_entry_t *px4_hw_mft_list_entry;
#define px4_hw_mft_list_uninitialized (px4_hw_mft_list_entry) -1
static const px4_hw_mft_item_t device_unsupported = {0, 0, 0};
// List of components on a specific board configuration
// The index of those components is given by the enum (px4_hw_mft_item_id_t)
// declared in board_common.h
// M0079
static const px4_hw_mft_item_t hw_mft_list_fc0200[] = {
{
.present = 0,
.mandatory = 0,
.connection = px4_hw_con_unknown,
},
};
static px4_hw_mft_list_entry_t mft_lists[] = {
{0x0300, hw_mft_list_fc0200, arraySize(hw_mft_list_fc0200)},
};
/************************************************************************************
* Name: board_query_manifest
*
* Description:
* Optional returns manifest item.
*
* Input Parameters:
* manifest_id - the ID for the manifest item to retrieve
*
* Returned Value:
* 0 - item is not in manifest => assume legacy operations
* pointer to a manifest item
*
************************************************************************************/
__EXPORT px4_hw_mft_item board_query_manifest(px4_hw_mft_item_id_t id)
{
static px4_hw_mft_list_entry boards_manifest = px4_hw_mft_list_uninitialized;
if (boards_manifest == px4_hw_mft_list_uninitialized) {
uint32_t ver_rev = board_get_hw_version() << 8;
ver_rev |= board_get_hw_revision();
for (unsigned i = 0; i < arraySize(mft_lists); i++) {
if (mft_lists[i].hw_ver_rev == ver_rev) {
boards_manifest = &mft_lists[i];
break;
}
}
if (boards_manifest == px4_hw_mft_list_uninitialized) {
syslog(LOG_ERR, "[boot] Board %4x is not supported!\n", ver_rev);
}
}
px4_hw_mft_item rv = &device_unsupported;
if (boards_manifest != px4_hw_mft_list_uninitialized &&
id < boards_manifest->entries) {
rv = &boards_manifest->mft[id];
}
return rv;
}

80
boards/modalai/fc-v2/src/mtd.cpp Normal file
View File

@ -0,0 +1,80 @@
/****************************************************************************
*
* Copyright (C) 2020 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include <nuttx/spi/spi.h>
#include <px4_platform_common/px4_manifest.h>
// KiB BS nB
static const px4_mft_device_t spi5 = { // FM25V02A on FMUM 32K 512 X 64
.bus_type = px4_mft_device_t::SPI,
.devid = SPIDEV_FLASH(0)
};
static const px4_mtd_entry_t fmum_fram = {
.device = &spi5,
.npart = 2,
.partd = {
{
.type = MTD_PARAMETERS,
.path = "/fs/mtd_params",
.nblocks = 32
},
{
.type = MTD_WAYPOINTS,
.path = "/fs/mtd_waypoints",
.nblocks = 32
}
},
};
static const px4_mtd_manifest_t board_mtd_config = {
.nconfigs = 1,
.entries = {
&fmum_fram
}
};
static const px4_mft_entry_s mtd_mft = {
.type = MTD,
.pmft = (void *) &board_mtd_config,
};
static const px4_mft_s mft = {
.nmft = 1,
.mfts = &mtd_mft
};
const px4_mft_s *board_get_manifest(void)
{
return &mft;
}

177
boards/modalai/fc-v2/src/sdio.c Normal file
View File

@ -0,0 +1,177 @@
/****************************************************************************
*
* Copyright (C) 2014, 2016 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <board_config.h>
#include <stdbool.h>
#include <stdio.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/sdio.h>
#include <nuttx/mmcsd.h>
#include "chip.h"
#include "board_config.h"
#include "stm32_gpio.h"
#include "stm32_sdmmc.h"
#ifdef CONFIG_MMCSD
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Card detections requires card support and a card detection GPIO */
#define HAVE_NCD 1
#if !defined(GPIO_SDMMC1_NCD)
# undef HAVE_NCD
#endif
/****************************************************************************
* Private Data
****************************************************************************/
static FAR struct sdio_dev_s *sdio_dev;
#ifdef HAVE_NCD
static bool g_sd_inserted = 0xff; /* Impossible value */
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: stm32_ncd_interrupt
*
* Description:
* Card detect interrupt handler.
*
****************************************************************************/
#ifdef HAVE_NCD
static int stm32_ncd_interrupt(int irq, FAR void *context)
{
bool present;
present = !stm32_gpioread(GPIO_SDMMC1_NCD);
if (sdio_dev && present != g_sd_inserted) {
sdio_mediachange(sdio_dev, present);
g_sd_inserted = present;
}
return OK;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: stm32_sdio_initialize
*
* Description:
* Initialize SDIO-based MMC/SD card support
*
****************************************************************************/
int stm32_sdio_initialize(void)
{
int ret;
#ifdef HAVE_NCD
/* Card detect */
bool cd_status;
/* Configure the card detect GPIO */
stm32_configgpio(GPIO_SDMMC1_NCD);
/* Register an interrupt handler for the card detect pin */
stm32_gpiosetevent(GPIO_SDMMC1_NCD, true, true, true, stm32_ncd_interrupt);
#endif
/* Mount the SDIO-based MMC/SD block driver */
/* First, get an instance of the SDIO interface */
finfo("Initializing SDIO slot %d\n", SDIO_SLOTNO);
sdio_dev = sdio_initialize(SDIO_SLOTNO);
if (!sdio_dev) {
syslog(LOG_ERR, "[boot] Failed to initialize SDIO slot %d\n", SDIO_SLOTNO);
return -ENODEV;
}
/* Now bind the SDIO interface to the MMC/SD driver */
finfo("Bind SDIO to the MMC/SD driver, minor=%d\n", SDIO_MINOR);
ret = mmcsd_slotinitialize(SDIO_MINOR, sdio_dev);
if (ret != OK) {
syslog(LOG_ERR, "[boot] Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
return ret;
}
finfo("Successfully bound SDIO to the MMC/SD driver\n");
#ifdef HAVE_NCD
/* Use SD card detect pin to check if a card is g_sd_inserted */
cd_status = !stm32_gpioread(GPIO_SDMMC1_NCD);
finfo("Card detect : %d\n", cd_status);
sdio_mediachange(sdio_dev, cd_status);
#else
/* Assume that the SD card is inserted. What choice do we have? */
sdio_mediachange(sdio_dev, true);
#endif
return OK;
}
#endif /* CONFIG_MMCSD */

56
boards/modalai/fc-v2/src/spi.cpp Normal file
View File

@ -0,0 +1,56 @@
/****************************************************************************
*
* Copyright (C) 2020 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include <px4_arch/spi_hw_description.h>
#include <drivers/drv_sensor.h>
#include <nuttx/spi/spi.h>
constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
initSPIBus(SPI::Bus::SPI1, {
initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
}),
initSPIBus(SPI::Bus::SPI2, {
initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
}),
initSPIBus(SPI::Bus::SPI4, {
initSPIDevice(DRV_MAG_DEVTYPE_BMM150, SPI::CS{GPIO::PortH, GPIO::Pin15}, SPI::DRDY{GPIO::PortD, GPIO::Pin12}),
}),
initSPIBus(SPI::Bus::SPI5, {
initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7})
}),
initSPIBusExternal(SPI::Bus::SPI6, {
initSPIConfigExternal(SPI::CS{GPIO::PortI, GPIO::Pin10}),
}),
};
static constexpr bool unused = validateSPIConfig(px4_spi_buses);

71
boards/modalai/fc-v2/src/timer_config.cpp Normal file
View File

@ -0,0 +1,71 @@
/****************************************************************************
*
* Copyright (C) 2021 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include <px4_arch/io_timer_hw_description.h>
/* Timer allocation
*
* TIM5_CH4 T FMU_CH1
* TIM5_CH3 T FMU_CH2
* TIM5_CH2 T FMU_CH3
* TIM5_CH1 T FMU_CH4
*
* TIM4_CH2 T FMU_CH5
* TIM4_CH3 T FMU_CH6
*
* TIM12_CH1 T FMU_CH7
* TIM12_CH2 T FMU_CH8
*
*/
constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
initIOTimer(Timer::Timer5, DMA{DMA::Index1}),
initIOTimer(Timer::Timer4, DMA{DMA::Index1}),
initIOTimer(Timer::Timer12),
initIOTimer(Timer::Timer1),
initIOTimer(Timer::Timer2),
};
constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel4}, {GPIO::PortI, GPIO::Pin0}),
initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel3}, {GPIO::PortH, GPIO::Pin12}),
initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel2}, {GPIO::PortH, GPIO::Pin11}),
initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel1}, {GPIO::PortH, GPIO::Pin10}),
initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel2}, {GPIO::PortD, GPIO::Pin13}),
initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel3}, {GPIO::PortD, GPIO::Pin14}),
initIOTimerChannel(io_timers, {Timer::Timer12, Timer::Channel1}, {GPIO::PortH, GPIO::Pin6}),
initIOTimerChannel(io_timers, {Timer::Timer12, Timer::Channel2}, {GPIO::PortH, GPIO::Pin9}),
};
constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
initIOTimerChannelMapping(io_timers, timer_io_channels);

105
boards/modalai/fc-v2/src/usb.c Normal file
View File

@ -0,0 +1,105 @@
/****************************************************************************
*
* Copyright (C) 2016 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file px4fmu_usb.c
*
* Board-specific USB functions.
*/
/************************************************************************************
* Included Files
************************************************************************************/
#include <px4_platform_common/px4_config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <nuttx/usb/usbdev.h>
#include <nuttx/usb/usbdev_trace.h>
#include <arm_arch.h>
#include <chip.h>
#include <stm32_gpio.h>
#include <stm32_otg.h>
#include "board_config.h"
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_usbinitialize
*
* Description:
* Called to setup USB-related GPIO pins for the PX4FMU board.
*
************************************************************************************/
__EXPORT void stm32_usbinitialize(void)
{
/* The OTG FS has an internal soft pull-up */
/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
#ifdef CONFIG_STM32H7_OTGFS
stm32_configgpio(GPIO_OTGFS_VBUS);
#endif
}
/************************************************************************************
* Name: stm32_usbsuspend
*
* Description:
* Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
* used. This function is called whenever the USB enters or leaves suspend mode.
* This is an opportunity for the board logic to shutdown clocks, power, etc.
* while the USB is suspended.
*
************************************************************************************/
__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
{
uinfo("resume: %d\n", resume);
}

138
boards/modalai/fc-v2/test.cmake Normal file
View File

@ -0,0 +1,138 @@
px4_add_board(
PLATFORM nuttx
VENDOR modalai
MODEL fc-v2
LABEL test
TOOLCHAIN arm-none-eabi
ARCHITECTURE cortex-m7
ROMFSROOT px4fmu_common
BUILD_BOOTLOADER
#IO px4_io-v2_default
TESTING
UAVCAN_INTERFACES 1
UAVCAN_TIMER_OVERRIDE 2
#ETHERNET
SERIAL_PORTS
GPS1:/dev/ttyS0
TEL1:/dev/ttyS6
TEL2:/dev/ttyS4
DRIVERS
adc/ads1115
adc/board_adc
barometer # all available barometer drivers
batt_smbus
camera_capture
camera_trigger
differential_pressure # all available differential pressure drivers
distance_sensor # all available distance sensor drivers
dshot
gps
#heater
#imu # all available imu drivers
imu/bosch/bmi088
imu/invensense/icm20602
imu/invensense/icm20649
imu/invensense/icm20948 # required for ak09916 mag
imu/invensense/icm42688p
irlock
lights # all available light drivers
magnetometer # all available magnetometer drivers
optical_flow # all available optical flow drivers
osd
pca9685
pca9685_pwm_out
power_monitor/ina226
#protocol_splitter
pwm_out_sim
pwm_out
#px4io
rc_input
roboclaw
rpm
#safety_button
telemetry # all available telemetry drivers
test_ppm
#tone_alarm
uavcan
MODULES
airspeed_selector
attitude_estimator_q
camera_feedback
commander
dataman
ekf2
esc_battery
events
flight_mode_manager
fw_att_control
fw_pos_control_l1
gyro_calibration
gyro_fft
land_detector
landing_target_estimator
load_mon
local_position_estimator
logger
mavlink
mc_att_control
mc_hover_thrust_estimator
mc_pos_control
mc_rate_control
#micrortps_bridge
navigator
rc_update
rover_pos_control
sensors
sih
temperature_compensation
#uuv_att_control
#uuv_pos_control
vmount
vtol_att_control
SYSTEMCMDS
bl_update
dmesg
dumpfile
esc_calib
gpio
hardfault_log
i2cdetect
led_control
mft
mixer
motor_ramp
motor_test
mtd
nshterm
#netman
param
perf
pwm
reboot
reflect
sd_bench
serial_test
system_time
# tests # tests and test runner
top
topic_listener
tune_control
uorb
usb_connected
ver
work_queue
EXAMPLES
fake_gps
#fake_imu
#fake_magnetometer
#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
#hello
#hwtest # Hardware test
#matlab_csv_serial
#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
#rover_steering_control # Rover example app
#uuv_example_app
#work_item
)