dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity

Single wire now working once moving away from UART5.

This commit is contained in:
Simon Wilks 2012-11-29 16:42:13 +01:00
parent d6e54c3ce4
commit d82c62e95b
1 changed files with 41 additions and 24 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

63
apps/hott_telemetry/hott_telemetry_main.c
View File

@ -40,12 +40,6 @@
* The HoTT receiver polls each device at a regular interval at which point
* a data packet can be returned if necessary.
*
* NOTE: Since HoTT telemetry works half-duplex over a single wire the wire
* is connected to both the UART TX and RX port. In order to send and receive
* we need to be able to disable one of these ports at a time. This level of
* control is currently not provided by Nuttx (yet) so we need to do this
* at the hardware level for now.
*
* TODO: Add support for at least the vario and GPS sensor data.
*
*/
@ -94,9 +88,6 @@ static int send_data(int uart, uint8_t *buffer, int size);
static int open_uart(const char *device, struct termios *uart_config_original)
{
/* Change the TX port to be open-drain */
stm32_configgpio(GPIO_UART5_TX | GPIO_OPENDRAIN);
/* baud rate */
int speed = B19200;
int uart;
@ -142,12 +133,37 @@ static int open_uart(const char *device, struct termios *uart_config_original)
FATAL_MSG(msg);
}
/* Get the appropriate GPIO pin and control register */
uint32_t gpio_uart;
uint32_t uart_cr3;
switch(device[strlen(device) - 1]) {
case '0':
gpio_uart = GPIO_USART1_TX;
uart_cr3 = STM32_USART1_CR3;
break;
case '1':
gpio_uart = GPIO_USART2_TX;
uart_cr3 = STM32_USART2_CR3;
break;
case '2':
sprintf(msg, "/dev/ttyS3 is not supported.\n", device);
close(uart);
FATAL_MSG(msg);
break;
case '3':
gpio_uart = GPIO_USART6_TX;
uart_cr3 = STM32_USART6_CR3;
break;
}
/* Change the TX port to be open-drain */
stm32_configgpio(gpio_uart | GPIO_OPENDRAIN);
/* Turn on half-duplex mode */
uint32_t cr;
cr = getreg32(STM32_UART5_CR3);
cr = getreg32(uart_cr3);
cr |= (USART_CR3_HDSEL);
//cr &= ~(USART_CR2_LINEN|USART_CR2_CLKEN|USART_CR3_SCEN|USART_CR3_IREN);
putreg32(cr, STM32_UART5_CR3);
putreg32(cr, uart_cr3);
return uart;
}
@ -157,7 +173,7 @@ int read_data(int uart, int *id)
const int timeout = 1000;
struct pollfd fds[] = { { .fd = uart, .events = POLLIN } };
//if (poll(fds, 1, timeout) > 0) {
if (poll(fds, 1, timeout) > 0) {
/* get the mode: binary or text */
char mode;
@ -165,14 +181,15 @@ int read_data(int uart, int *id)
read(uart, id, 1);
//printf("[%x %x]\n", mode, *id);
/* if we have a binary mode request */
if (mode != BINARY_MODE_REQUEST_ID) {
return ERROR;
}
//} else {
// ERROR_MSG("UART timeout on TX/RX port");
// return ERROR;
//}
} else {
ERROR_MSG("UART timeout on TX/RX port");
return ERROR;
}
return OK;
}
@ -190,14 +207,15 @@ int send_data(int uart, uint8_t *buffer, int size)
}
write(uart, &buffer[i], 1);
// THIS SHOULDN'T BE NECESSARY!
char dummy;
read(uart, &dummy, 1);
/* Sleep before sending the next byte. */
usleep(POST_WRITE_DELAY_IN_USECS);
}
/* A hack the reads out what was written so the next read from the receiver doesn't get it. */
/* TODO: Fix this!! */
uint8_t dummy[size];
read(uart, &dummy, size);
return OK;
}
@ -207,7 +225,7 @@ int hott_telemetry_thread_main(int argc, char *argv[])
thread_running = true;
char *device = "/dev/ttyS2"; /**< Default telemetry port: UART5 */
char *device = "/dev/ttyS1"; /**< Default telemetry port: USART2 */
/* read commandline arguments */
for (int i = 0; i < argc && argv[i]; i++) {
@ -250,7 +268,6 @@ int hott_telemetry_thread_main(int argc, char *argv[])
}
//printf("Write start\n");
send_data(uart, buffer, size);
//printf("Write end\n");
} else {
printf("NOK: %x\n", id);
}