dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity

Merge branch 'rssi' of github.com:PX4/Firmware into rssi

This commit is contained in:
Lorenz Meier 2014-01-23 09:18:01 +01:00
parent 2aa76f1a3c 0994412cca
commit c74660fec5
3 changed files with 29 additions and 33 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
src/drivers/px4io/px4io.cpp
View File

@ -2646,17 +2646,17 @@ monitor(void)
read(0, &c, 1);
if (cancels-- == 0) {
printf("\033[H"); /* move cursor home and clear screen */
printf("\033[2J\033[H"); /* move cursor home and clear screen */
exit(0);
}
}
if (g_dev != nullptr) {
printf("\033[H"); /* move cursor home and clear screen */
printf("\033[2J\033[H"); /* move cursor home and clear screen */
(void)g_dev->print_status();
(void)g_dev->print_debug();
printf("[ Use 'px4io debug <N>' for more output. Hit <enter> three times to exit monitor mode ]\n");
printf("\n\n\n[ Use 'px4io debug <N>' for more output. Hit <enter> three times to exit monitor mode ]\n");
} else {
errx(1, "driver not loaded, exiting");

53
src/modules/px4iofirmware/adc.c
View File

@ -83,6 +83,14 @@ adc_init(void)
{
adc_perf = perf_alloc(PC_ELAPSED, "adc");
/* put the ADC into power-down mode */
rCR2 &= ~ADC_CR2_ADON;
up_udelay(10);
/* bring the ADC out of power-down mode */
rCR2 |= ADC_CR2_ADON;
up_udelay(10);
/* do calibration if supported */
#ifdef ADC_CR2_CAL
rCR2 |= ADC_CR2_RSTCAL;
@ -96,41 +104,25 @@ adc_init(void)
if (rCR2 & ADC_CR2_CAL)
return -1;
#endif
/* arbitrarily configure all channels for 55 cycle sample time */
rSMPR1 = 0b00000011011011011011011011011011;
/*
* Configure sampling time.
*
* For electrical protection reasons, we want to be able to have
* 10K in series with ADC inputs that leave the board. At 12MHz this
* means we need 28.5 cycles of sampling time (per table 43 in the
* datasheet).
*/
rSMPR1 = 0b00000000011011011011011011011011;
rSMPR2 = 0b00011011011011011011011011011011;
/* XXX for F2/4, might want to select 12-bit mode? */
rCR1 = 0;
/* enable the temperature sensor / Vrefint channel if supported*/
rCR2 =
#ifdef ADC_CR2_TSVREFE
/* enable the temperature sensor in CR2 */
ADC_CR2_TSVREFE |
#endif
0;
#ifdef ADC_CCR_TSVREFE
/* enable temperature sensor in CCR */
rCCR = ADC_CCR_TSVREFE;
#endif
rCR2 |= ADC_CR2_TSVREFE; /* enable the temperature sensor / Vrefint channel */
/* configure for a single-channel sequence */
rSQR1 = 0;
rSQR2 = 0;
rSQR3 = 0; /* will be updated with the channel each tick */
/* power-cycle the ADC and turn it on */
rCR2 &= ~ADC_CR2_ADON;
up_udelay(10);
rCR2 |= ADC_CR2_ADON;
up_udelay(10);
rCR2 |= ADC_CR2_ADON;
up_udelay(10);
rSQR3 = 0; /* will be updated with the channel at conversion time */
return 0;
}
@ -141,11 +133,12 @@ adc_init(void)
uint16_t
adc_measure(unsigned channel)
{
perf_begin(adc_perf);
/* clear any previous EOC */
if (rSR & ADC_SR_EOC)
rSR &= ~ADC_SR_EOC;
rSR = 0;
(void)rDR;
/* run a single conversion right now - should take about 60 cycles (a few microseconds) max */
rSQR3 = channel;
@ -158,7 +151,6 @@ adc_measure(unsigned channel)
/* never spin forever - this will give a bogus result though */
if (hrt_elapsed_time(&now) > 100) {
debug("adc timeout");
perf_end(adc_perf);
return 0xffff;
}
@ -166,6 +158,7 @@ adc_measure(unsigned channel)
/* read the result and clear EOC */
uint16_t result = rDR;
rSR = 0;
perf_end(adc_perf);
return result;

3
src/modules/px4iofirmware/px4io.c
View File

@ -210,6 +210,9 @@ user_start(int argc, char *argv[])
/* initialise the control inputs */
controls_init();
/* set up the ADC */
adc_init();
/* start the FMU interface */
interface_init();