dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity

Merge pull request #584 from PX4/autostart_cleanup 

Autostart cleanup
This commit is contained in:
Lorenz Meier 2014-01-20 04:20:04 -08:00
parent 13822b35e7 f8c5a6cc50
commit c58b68d377
44 changed files with 1211 additions and 2014 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

85
ROMFS/px4fmu_common/init.d/10015_tbs_discovery
View File

@ -1,74 +1,31 @@
#!nsh
echo "[init] Team Blacksheep Discovery Quad"
#
# Load default params for this platform
# Team Blacksheep Discovery Quadcopter
#
if param compare SYS_AUTOCONFIG 1
# Maintainers: Simon Wilks <sjwilks@gmail.com>
#
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.006
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.17
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
#
# Default parameters for this platform
#
param set MC_ATT_P 5.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.15
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.17
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.006
param set MC_YAWPOS_P 0.5
param set MC_YAWRATE_D 0.0
param set MC_YAWRATE_I 0.0
param set MC_YAWPOS_I 0.15
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.2
param save
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_D 0.0
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
set VEHICLE_TYPE mc
set MIXER FMU_quad_w
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load the mixer for a quad with wide arms
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix
#
# Set PWM output frequency
#
pwm rate -c 1234 -r 400
#
# Set disarmed, min and max PWM signals
#
pwm disarmed -c 1234 -p 900
pwm min -c 1234 -p 1100
pwm max -c 1234 -p 1900
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
set PWM_OUTPUTS 1234
set PWM_RATE 400

104
ROMFS/px4fmu_common/init.d/10016_3dr_iris
View File

@ -1,73 +1,53 @@
#!nsh
echo "[init] 3DR Iris Quad"
#
# Load default params for this platform
# 3DR Iris Quadcopter
#
if param compare SYS_AUTOCONFIG 1
# Maintainers: Anton Babushkin <anton.babushkin@me.com>
#
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.004
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.13
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
#
# Default parameters for this platform
#
param set MC_ATT_P 9.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.15
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.13
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_YAWPOS_P 0.5
param set MC_YAWRATE_D 0.0
param set MC_YAWRATE_I 0.0
param set MC_YAWPOS_I 0.15
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.2
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_D 0.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.8
param set MPC_THR_MIN 0.2
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
param set BAT_V_SCALING 0.00989
param set BAT_C_SCALING 0.0124
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
set VEHICLE_TYPE mc
set MIXER FMU_quad_w
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.0098
set EXIT_ON_END yes
fi
#
# Load the mixer for a quad with wide arms
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix
#
# Set PWM output frequency
#
pwm rate -c 1234 -r 400
#
# Set disarmed, min and max PWM signals
#
pwm disarmed -c 1234 -p 900
pwm min -c 1234 -p 1050
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
set PWM_OUTPUTS 1234
set PWM_RATE 400
set PWM_DISARMED 900
set PWM_MIN 1000
set PWM_MAX 2000

105
ROMFS/px4fmu_common/init.d/1001_rc_quad.hil
View File

@ -1,105 +0,0 @@
#!nsh
#
# USB HIL start
#
echo "[HIL] HILS quadrotor starting.."
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.0
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.05
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 3.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.1
param set MC_YAWRATE_D 0.0
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_P 0.05
param set NAV_TAKEOFF_ALT 3.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.5
param set MPC_THR_MIN 0.1
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
fi
# Allow USB some time to come up
sleep 1
# Tell MAVLink that this link is "fast"
mavlink start -b 230400 -d /dev/ttyACM0
# Create a fake HIL /dev/pwm_output interface
hil mode_pwm
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor
# see https://pixhawk.ethz.ch/mavlink/
#
param set MAV_TYPE 2
#
# Check if we got an IO
#
if px4io start
then
echo "IO started"
else
fmu mode_serial
echo "FMU started"
fi
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Start the attitude estimator (depends on orb)
#
att_pos_estimator_ekf start
#
# Load mixer and start controllers (depends on px4io)
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix
#
# Start position estimator
#
position_estimator_inav start
#
# Start attitude control
#
multirotor_att_control start
#
# Start position control
#
multirotor_pos_control start
echo "[HIL] setup done, running"

46
ROMFS/px4fmu_common/init.d/1001_rc_quad_x.hil Normal file
View File

@ -0,0 +1,46 @@
#!nsh
#
# HIL Quadcopter X
#
# Maintainers: Anton Babushkin <anton.babushkin@me.com>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_ATT_P 7.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_YAWPOS_P 2.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.3
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.8
param set MPC_THR_MIN 0.2
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
fi
set HIL yes
set VEHICLE_TYPE mc
set MIXER FMU_quad_x

135
ROMFS/px4fmu_common/init.d/1003_rc_quad_+.hil
View File

@ -1,105 +1,46 @@
#!nsh
#
# USB HIL start
# HIL Quadcopter +
#
# Maintainers: Anton Babushkin <anton.babushkin@me.com>
#
echo "[HIL] HILS quadrotor + starting.."
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.0
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.05
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 3.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.1
param set MC_YAWRATE_D 0.0
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_P 0.05
param set NAV_TAKEOFF_ALT 3.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.5
param set MPC_THR_MIN 0.1
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
#
# Default parameters for this platform
#
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_ATT_P 7.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_YAWPOS_P 2.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.3
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.8
param set MPC_THR_MIN 0.2
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
fi
# Allow USB some time to come up
sleep 1
# Tell MAVLink that this link is "fast"
mavlink start -b 230400 -d /dev/ttyACM0
# Create a fake HIL /dev/pwm_output interface
hil mode_pwm
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor
# see https://pixhawk.ethz.ch/mavlink/
#
param set MAV_TYPE 2
#
# Check if we got an IO
#
if px4io start
then
echo "IO started"
else
fmu mode_serial
echo "FMU started"
fi
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Start the attitude estimator (depends on orb)
#
att_pos_estimator_ekf start
#
# Load mixer and start controllers (depends on px4io)
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_+.mix
#
# Start position estimator
#
position_estimator_inav start
#
# Start attitude control
#
multirotor_att_control start
#
# Start position control
#
multirotor_pos_control start
echo "[HIL] setup done, running"
set HIL yes
set VEHICLE_TYPE mc
set MIXER FMU_quad_+

68
ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil
View File

@ -1,14 +1,13 @@
#!nsh
#
# USB HIL start
# HIL Rascal 110 (Flightgear)
#
# Maintainers: Thomas Gubler <thomasgubler@gmail.com>
#
echo "[HIL] HILStar starting.."
echo "HIL Rascal 110 starting.."
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
@ -40,59 +39,8 @@ then
param save
fi
# Allow USB some time to come up
sleep 1
# Tell MAVLink that this link is "fast"
mavlink start -b 230400 -d /dev/ttyACM0
set HIL yes
# Create a fake HIL /dev/pwm_output interface
hil mode_pwm
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor
# see https://pixhawk.ethz.ch/mavlink/
#
param set MAV_TYPE 1
#
# Check if we got an IO
#
if px4io start
then
echo "IO started"
else
fmu mode_serial
echo "FMU started"
fi
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Start the attitude estimator (depends on orb)
#
att_pos_estimator_ekf start
#
# Load mixer and start controllers (depends on px4io)
#
set MODE autostart
mixer load /dev/pwm_output /etc/mixers/FMU_AERT.mix
if [ -f /fs/microsd/etc/mixers/FMU_AERT.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_AERT.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_AERT.mix
else
echo "Using /etc/mixers/FMU_AERT.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_AERT.mix
fi
fw_pos_control_l1 start
fw_att_control start
echo "[HIL] setup done, running"
set VEHICLE_TYPE fw
set MIXER FMU_AERT

61
ROMFS/px4fmu_common/init.d/2100_mpx_easystar
View File

@ -1,13 +1,15 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on EasyStar"
#
# Load default params for this platform
# MPX EasyStar Plane
#
if param compare SYS_AUTOCONFIG 1
# Maintainers: ???
#
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
#
# Default parameters for this platform
#
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 15
@ -31,50 +33,7 @@ then
param set FW_L1_PERIOD 16
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_RET.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_RET.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_RET.mix
else
echo "Using /etc/mixers/FMU_RET.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_RET.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
set VEHICLE_TYPE fw
set MIXER FMU_RET

85
ROMFS/px4fmu_common/init.d/3031_io_phantom
View File

@ -1,85 +0,0 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on Phantom FPV"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set FW_AIRSPD_MIN 11.4
param set FW_AIRSPD_TRIM 14
param set FW_AIRSPD_MAX 22
param set FW_L1_PERIOD 15
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 15
param set FW_P_LIM_MAX 45
param set FW_P_LIM_MIN -45
param set FW_P_P 60
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 2
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 15
param set FW_R_P 80
param set FW_R_RMAX 60
param set FW_THR_CRUISE 0.8
param set FW_THR_LND_MAX 0
param set FW_THR_MAX 1
param set FW_THR_MIN 0.5
param set FW_T_SINK_MAX 5.0
param set FW_T_SINK_MIN 2.0
param set FW_Y_ROLLFF 1.0
param set RC_SCALE_ROLL 0.6
param set RC_SCALE_PITCH 0.6
param set TRIM_PITCH 0.1
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix
else
echo "Using /etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing

44
ROMFS/px4fmu_common/init.d/3031_phantom Normal file
View File

@ -0,0 +1,44 @@
#!nsh
#
# Phantom FPV Flying Wing
#
# Maintainers: Simon Wilks <sjwilks@gmail.com>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set FW_AIRSPD_MIN 11.4
param set FW_AIRSPD_TRIM 14
param set FW_AIRSPD_MAX 22
param set FW_L1_PERIOD 15
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 15
param set FW_P_LIM_MAX 45
param set FW_P_LIM_MIN -45
param set FW_P_P 60
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 2
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 15
param set FW_R_P 80
param set FW_R_RMAX 60
param set FW_THR_CRUISE 0.8
param set FW_THR_LND_MAX 0
param set FW_THR_MAX 1
param set FW_THR_MIN 0.5
param set FW_T_SINK_MAX 5.0
param set FW_T_SINK_MIN 2.0
param set FW_Y_ROLLFF 1.0
param set RC_SCALE_ROLL 0.6
param set RC_SCALE_PITCH 0.6
param set TRIM_PITCH 0.1
fi
set VEHICLE_TYPE fw
set MIXER FMU_Q

58
ROMFS/px4fmu_common/init.d/3032_skywalker_x5
View File

@ -1,58 +1,14 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on Skywalker X5"
#
# Load default params for this platform
# Skywalker X5 Flying Wing
#
if param compare SYS_AUTOCONFIG 1
# Maintainers: Thomas Gubler <thomasgubler@gmail.com>, Julian Oes <joes@student.ethz.ch>
#
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
# TODO
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix
else
echo "Using /etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
set VEHICLE_TYPE fw
set MIXER FMU_Q

84
ROMFS/px4fmu_common/init.d/3033_io_wingwing
View File

@ -1,84 +0,0 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on the Wing Wing (aka Z-84)"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set FW_AIRSPD_MIN 7
param set FW_AIRSPD_TRIM 9
param set FW_AIRSPD_MAX 14
param set FW_L1_PERIOD 10
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 20
param set FW_P_LIM_MAX 30
param set FW_P_LIM_MIN -20
param set FW_P_P 30
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 2
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 60
param set FW_R_RMAX 60
param set FW_THR_CRUISE 0.65
param set FW_THR_MAX 0.7
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5
param set FW_T_SINK_MIN 2
param set FW_T_TIME_CONST 9
param set FW_Y_ROLLFF 2.0
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix
else
echo "Using /etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing

43
ROMFS/px4fmu_common/init.d/3033_wingwing Normal file
View File

@ -0,0 +1,43 @@
#!nsh
#
# Wing Wing (aka Z-84) Flying Wing
#
# Maintainers: Simon Wilks <sjwilks@gmail.com>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set FW_AIRSPD_MIN 7
param set FW_AIRSPD_TRIM 9
param set FW_AIRSPD_MAX 14
param set FW_L1_PERIOD 10
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 20
param set FW_P_LIM_MAX 30
param set FW_P_LIM_MIN -20
param set FW_P_P 30
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 2
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 60
param set FW_R_RMAX 60
param set FW_THR_CRUISE 0.65
param set FW_THR_MAX 0.7
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5
param set FW_T_SINK_MIN 2
param set FW_T_TIME_CONST 9
param set FW_Y_ROLLFF 2.0
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
fi
set VEHICLE_TYPE fw
set MIXER FMU_Q

43
ROMFS/px4fmu_common/init.d/3034_fx79 Normal file
View File

@ -0,0 +1,43 @@
#!nsh
#
# FX-79 Buffalo Flying Wing
#
# Maintainers: Simon Wilks <sjwilks@gmail.com>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set FW_AIRSPD_MAX 20
param set FW_AIRSPD_TRIM 12
param set FW_AIRSPD_MIN 15
param set FW_L1_PERIOD 12
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 15
param set FW_P_LIM_MAX 50
param set FW_P_LIM_MIN -50
param set FW_P_P 60
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 1.1
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 80
param set FW_R_RMAX 100
param set FW_THR_CRUISE 0.75
param set FW_THR_MAX 1
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5.0
param set FW_T_SINK_MIN 4.0
param set FW_T_TIME_CONST 9
param set FW_Y_ROLLFF 1.1
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
fi
set VEHICLE_TYPE fw
set MIXER FMU_FX79

84
ROMFS/px4fmu_common/init.d/3034_io_fx79
View File

@ -1,84 +0,0 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on FX-79 Buffalo"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set FW_AIRSPD_MAX 20
param set FW_AIRSPD_TRIM 12
param set FW_AIRSPD_MIN 15
param set FW_L1_PERIOD 12
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 15
param set FW_P_LIM_MAX 50
param set FW_P_LIM_MIN -50
param set FW_P_P 60
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 1.1
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 80
param set FW_R_RMAX 100
param set FW_THR_CRUISE 0.75
param set FW_THR_MAX 1
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5.0
param set FW_T_SINK_MIN 4.0
param set FW_T_TIME_CONST 9
param set FW_Y_ROLLFF 1.1
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_FX79.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_FX79.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_FX79.mix
else
echo "Using /etc/mixers/FMU_FX79.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_FX79.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing

76
ROMFS/px4fmu_common/init.d/4010_dji_f330
View File

@ -1,31 +1,31 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on DJI F330"
#
# Load default params for this platform
# DJI Flame Wheel F330 Quadcopter
#
if param compare SYS_AUTOCONFIG 1
# Maintainers: Anton Babushkin <anton.babushkin@me.com>
#
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.004
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
#
# Default parameters for this platform
#
param set MC_ATT_P 7.0
param set MC_YAWPOS_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_YAWPOS_P 2.8
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.0
param set MC_YAWRATE_D 0.005
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_P 0.3
param set NAV_TAKEOFF_ALT 3.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.2
param set MC_YAWRATE_I 0.05
param set MC_YAWRATE_D 0.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.7
param set MPC_THR_MIN 0.3
param set MPC_THR_MAX 0.8
param set MPC_THR_MIN 0.2
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
@ -38,32 +38,14 @@ then
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
fi
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
set VEHICLE_TYPE mc
set MIXER FMU_quad_x
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
sh /etc/init.d/rc.mc_interface
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
set PWM_OUTPUTS 1234
set PWM_RATE 400
# DJI ESC range
set PWM_DISARMED 900
set PWM_MIN 1200
set PWM_MAX 1900

91
ROMFS/px4fmu_common/init.d/4011_dji_f450
View File

@ -1,74 +1,37 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on DJI F450"
#
# Load default params for this platform
# DJI Flame Wheel F450 Quadcopter
#
if param compare SYS_AUTOCONFIG 1
# Maintainers: Lorenz Meier <lm@inf.ethz.ch>
#
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.004
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
#
# Default parameters for this platform
#
param set MC_ATT_P 7.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_YAWPOS_P 2.0
param set MC_YAWRATE_D 0.005
param set MC_YAWRATE_I 0.2
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.3
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
# TODO add default MPC parameters
fi
#
# Load mixer
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix
set VEHICLE_TYPE mc
set MIXER FMU_quad_x
#
# Set PWM output frequency
#
pwm rate -c 1234 -r 400
#
# Set disarmed, min and max PWM signals (for DJI ESCs)
#
pwm disarmed -c 1234 -p 900
pwm min -c 1234 -p 1200
pwm max -c 1234 -p 1800
#
# Start common multirotor apps
#
sh /etc/init.d/rc.multirotor
set PWM_OUTPUTS 1234
set PWM_RATE 400
# DJI ESC range
set PWM_DISARMED 900
set PWM_MIN 1200
set PWM_MAX 1900

33
ROMFS/px4fmu_common/init.d/4012_hk_x550 Normal file
View File

@ -0,0 +1,33 @@
#!nsh
#
# HobbyKing X550 Quadcopter
#
# Maintainers: Todd Stellanova <tstellanova@gmail.com>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set MC_ATT_P 5.5
param set MC_ATT_I 0
param set MC_ATT_D 0
param set MC_ATTRATE_P 0.14
param set MC_ATTRATE_I 0
param set MC_ATTRATE_D 0.006
param set MC_YAWPOS_P 0.6
param set MC_YAWPOS_I 0
param set MC_YAWPOS_D 0
param set MC_YAWRATE_P 0.08
param set MC_YAWRATE_I 0
param set MC_YAWRATE_D 0
# TODO add default MPC parameters
fi
set VEHICLE_TYPE mc
set MIXER FMU_quad_x
set PWM_OUTPUTS 1234
set PWM_RATE 400

51
ROMFS/px4fmu_common/init.d/40_io_segway
View File

@ -1,51 +0,0 @@
#!nsh
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
# TODO
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 10 = ground rover
#
param set MAV_TYPE 10
#
# Start MAVLink (depends on orb)
#
mavlink start -d /dev/ttyS1 -b 57600
usleep 5000
#
# Start and configure PX4IO interface
#
sh /etc/init.d/rc.io
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Start GPS interface (depends on orb)
#
gps start
#
# Start the attitude estimator (depends on orb)
#
attitude_estimator_ekf start
#
# Load mixer and start controllers (depends on px4io)
#
roboclaw start /dev/ttyS2 128 1200
segway start

76
ROMFS/px4fmu_common/init.d/666_fmu_q_x550
View File

@ -1,76 +0,0 @@
#!nsh
echo "[init] 666_fmu_q_x550: PX4FMU Quad X550 with or without IO"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set MC_ATTRATE_P 0.14
param set MC_ATTRATE_I 0
param set MC_ATTRATE_D 0.006
param set MC_ATT_P 5.5
param set MC_ATT_I 0
param set MC_ATT_D 0
param set MC_YAWPOS_D 0
param set MC_YAWPOS_I 0
param set MC_YAWPOS_P 0.6
param set MC_YAWRATE_D 0
param set MC_YAWRATE_I 0
param set MC_YAWRATE_P 0.08
param set RC_SCALE_PITCH 1
param set RC_SCALE_ROLL 1
param set RC_SCALE_YAW 3
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix
#
# Set PWM output frequency
#
pwm rate -c 1234 -r 400
#
# Set disarmed, min and max PWM signals
#
pwm disarmed -c 1234 -p 900
pwm min -c 1234 -p 1100
pwm max -c 1234 -p 1900
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor

51
ROMFS/px4fmu_common/init.d/800_sdlogger
View File

@ -1,51 +0,0 @@
#!nsh
echo "[init] PX4FMU v1, v2 init to log only
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param save
fi
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
# Set PWM values for DJI ESCs
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
sh /etc/init.d/rc.sensors
gps start
attitude_estimator_ekf start
position_estimator_inav start
if [ -d /fs/microsd ]
then
if [ $BOARD == fmuv1 ]
then
sdlog2 start -r 50 -e -b 16
else
sdlog2 start -r 200 -e -b 16
fi
fi

141
ROMFS/px4fmu_common/init.d/rc.autostart Normal file
View File

@ -0,0 +1,141 @@
#
# Check if auto-setup from one of the standard scripts is wanted
# SYS_AUTOSTART = 0 means no autostart (default)
#
# AUTOSTART PARTITION:
# 0 .. 999 Reserved (historical)
# 1000 .. 1999 Simulation setups
# 2000 .. 2999 Standard planes
# 3000 .. 3999 Flying wing
# 4000 .. 4999 Quad X
# 5000 .. 5999 Quad +
# 6000 .. 6999 Hexa X
# 7000 .. 7999 Hexa +
# 8000 .. 8999 Octo X
# 9000 .. 9999 Octo +
# 10000 .. 10999 Wide arm / H frame
# 11000 .. 11999 Hexa Cox
# 12000 .. 12999 Octo Cox
#
# Simulation setups
#
if param compare SYS_AUTOSTART 1000
then
#sh /etc/init.d/1000_rc_fw_easystar.hil
fi
if param compare SYS_AUTOSTART 1001
then
sh /etc/init.d/1001_rc_quad_x.hil
fi
if param compare SYS_AUTOSTART 1002
then
#sh /etc/init.d/1002_rc_fw_state.hil
fi
if param compare SYS_AUTOSTART 1003
then
sh /etc/init.d/1003_rc_quad_+.hil
fi
if param compare SYS_AUTOSTART 1004
then
sh /etc/init.d/1004_rc_fw_Rascal110.hil
fi
#
# Standard plane
#
if param compare SYS_AUTOSTART 2100 100
then
#sh /etc/init.d/2100_mpx_easystar
#set MODE custom
fi
if param compare SYS_AUTOSTART 2101 101
then
#sh /etc/init.d/2101_hk_bixler
#set MODE custom
fi
if param compare SYS_AUTOSTART 2102 102
then
#sh /etc/init.d/2102_3dr_skywalker
#set MODE custom
fi
#
# Flying wing
#
if param compare SYS_AUTOSTART 3030
then
#sh /etc/init.d/3030_io_camflyer
fi
if param compare SYS_AUTOSTART 3031
then
sh /etc/init.d/3031_phantom
fi
if param compare SYS_AUTOSTART 3032
then
sh /etc/init.d/3032_skywalker_x5
fi
if param compare SYS_AUTOSTART 3033
then
sh /etc/init.d/3033_wingwing
fi
if param compare SYS_AUTOSTART 3034
then
sh /etc/init.d/3034_fx79
fi
#
# Quad X
#
if param compare SYS_AUTOSTART 4008
then
#sh /etc/init.d/4008_ardrone
fi
if param compare SYS_AUTOSTART 4009
then
#sh /etc/init.d/4009_ardrone_flow
fi
if param compare SYS_AUTOSTART 4010
then
sh /etc/init.d/4010_dji_f330
fi
if param compare SYS_AUTOSTART 4011
then
sh /etc/init.d/4011_dji_f450
fi
if param compare SYS_AUTOSTART 4012
then
sh /etc/init.d/4012_hk_x550
fi
#
# Wide arm / H frame
#
if param compare SYS_AUTOSTART 10015
then
sh /etc/init.d/10015_tbs_discovery
fi
if param compare SYS_AUTOSTART 10016
then
sh /etc/init.d/10016_3dr_iris
fi

113
ROMFS/px4fmu_common/init.d/rc.custom_dji_f330_mkblctrl
View File

@ -1,113 +0,0 @@
#!nsh
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.002
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.09
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 6.8
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.0
param set MC_YAWRATE_D 0.005
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_P 0.3
param set NAV_TAKEOFF_ALT 3.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.7
param set MPC_THR_MIN 0.3
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
set EXIT_ON_END no
#
# Start the Mikrokopter ESC driver
#
if [ $MKBLCTRL_MODE == yes ]
then
if [ $MKBLCTRL_FRAME == x ]
then
echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame Mikrokopter-Addressing"
mkblctrl -mkmode x
else
echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame Mikrokopter-Addressing"
mkblctrl -mkmode +
fi
else
if [ $MKBLCTRL_FRAME == x ]
then
echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame"
else
echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame"
fi
mkblctrl
fi
usleep 10000
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer
#
if [ $MKBLCTRL_FRAME == x ]
then
mixer load /dev/mkblctrl /etc/mixers/FMU_quad_x.mix
else
mixer load /dev/mkblctrl /etc/mixers/FMU_quad_+.mix
fi
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
if [ $EXIT_ON_END == yes ]
then
exit
fi

120
ROMFS/px4fmu_common/init.d/rc.custom_io_esc
View File

@ -1,120 +0,0 @@
#!nsh
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.002
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.09
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 6.8
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.0
param set MC_YAWRATE_D 0.005
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_P 0.3
param set NAV_TAKEOFF_ALT 3.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.7
param set MPC_THR_MIN 0.3
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
fi
echo "RC script for PX4FMU + PX4IO + PPM-ESCs running"
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
set EXIT_ON_END no
usleep 10000
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start -d /dev/ttyS1 -b 57600
usleep 5000
sh /etc/init.d/rc.io
else
fmu mode_pwm
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS1 -b 57600
usleep 5000
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
if [ $ESC_MAKER = afro ]
then
# Set PWM values for Afro ESCs
pwm disarmed -c 1234 -p 1050
pwm min -c 1234 -p 1080
pwm max -c 1234 -p 1860
else
# Set PWM values for typical ESCs
pwm disarmed -c 1234 -p 900
pwm min -c 1234 -p 980
pwm max -c 1234 -p 1800
fi
#
# Load mixer
#
if [ $FRAME_GEOMETRY == x ]
then
echo "Frame geometry X"
mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix
else
if [ $FRAME_GEOMETRY == w ]
then
echo "Frame geometry W"
mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix
else
echo "Frame geometry +"
mixer load /dev/pwm_output /etc/mixers/FMU_quad_+.mix
fi
fi
#
# Set PWM output frequency
#
pwm rate -r 400 -c 1234
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
if [ $EXIT_ON_END == yes ]
then
exit
fi
echo "Script end"

34
ROMFS/px4fmu_common/init.d/rc.fixedwing
View File

@ -1,34 +0,0 @@
#!nsh
#
# Standard everything needed for fixedwing except mixer, actuator output and mavlink
#
#
# Start the sensors and test them.
#
sh /etc/init.d/rc.sensors
#
# Start logging (depends on sensors)
#
sh /etc/init.d/rc.logging
#
# Start GPS interface (depends on orb)
#
gps start
#
# Start the attitude and position estimator
#
att_pos_estimator_ekf start
#
# Start attitude controller
#
fw_att_control start
#
# Start the position controller
#
fw_pos_control_l1 start

19
ROMFS/px4fmu_common/init.d/rc.fw_apps Normal file
View File

@ -0,0 +1,19 @@
#!nsh
#
# Standard apps for fixed wing
#
#
# Start the attitude and position estimator
#
att_pos_estimator_ekf start
#
# Start attitude controller
#
fw_att_control start
#
# Start the position controller
#
fw_pos_control_l1 start

94
ROMFS/px4fmu_common/init.d/rc.hexa
View File

@ -1,94 +0,0 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on Hex"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.004
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 7.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.0
param set MC_YAWRATE_D 0.005
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_P 0.3
param set NAV_TAKEOFF_ALT 3.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.7
param set MPC_THR_MIN 0.3
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE list: https://pixhawk.ethz.ch/mavlink/
# 13 = hexarotor
#
param set MAV_TYPE 13
set EXIT_ON_END no
#
# Start and configure PX4IO interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# This is not possible on a hexa
tone_alarm error
fi
#
# Load mixer
#
mixer load /dev/pwm_output $MIXER
#
# Set PWM output frequency to 400 Hz
#
pwm rate -a -r 400
#
# Set disarmed, min and max PWM signals
#
pwm disarmed -c 123456 -p 900
pwm min -c 123456 -p 1100
pwm max -c 123456 -p 1900
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
if [ $EXIT_ON_END == yes ]
then
exit
fi

72
ROMFS/px4fmu_common/init.d/rc.interface Normal file
View File

@ -0,0 +1,72 @@
#!nsh
#
# Script to configure control interface
#
if [ $MIXER != none ]
then
#
# Load mixer
#
set MIXERSD /fs/microsd/etc/mixers/$MIXER.mix
#Use the mixer file from the SD-card if it exists
if [ -f $MIXERSD ]
then
set MIXER_FILE $MIXERSD
else
set MIXER_FILE /etc/mixers/$MIXER.mix
fi
if [ $OUTPUT_MODE == mkblctrl ]
then
set OUTPUT_DEV /dev/mkblctrl
else
set OUTPUT_DEV /dev/pwm_output
fi
if mixer load $OUTPUT_DEV $MIXER_FILE
then
echo "[init] Mixer loaded: $MIXER_FILE"
else
echo "[init] Error loading mixer: $MIXER_FILE"
tone_alarm $TUNE_OUT_ERROR
fi
else
echo "[init] Mixer not defined"
tone_alarm $TUNE_OUT_ERROR
fi
if [ $OUTPUT_MODE == fmu -o $OUTPUT_MODE == io ]
then
if [ $PWM_OUTPUTS != none ]
then
#
# Set PWM output frequency
#
if [ $PWM_RATE != none ]
then
echo "[init] Set PWM rate: $PWM_RATE"
pwm rate -c $PWM_OUTPUTS -r $PWM_RATE
fi
#
# Set disarmed, min and max PWM values
#
if [ $PWM_DISARMED != none ]
then
echo "[init] Set PWM disarmed: $PWM_DISARMED"
pwm disarmed -c $PWM_OUTPUTS -p $PWM_DISARMED
fi
if [ $PWM_MIN != none ]
then
echo "[init] Set PWM min: $PWM_MIN"
pwm min -c $PWM_OUTPUTS -p $PWM_MIN
fi
if [ $PWM_MAX != none ]
then
echo "[init] Set PWM max: $PWM_MAX"
pwm max -c $PWM_OUTPUTS -p $PWM_MAX
fi
fi
fi

36
ROMFS/px4fmu_common/init.d/rc.io
View File

@ -1,23 +1,21 @@
#
# Start PX4IO interface (depends on orb, commander)
# Init PX4IO interface
#
if px4io start
then
#
# Allow PX4IO to recover from midair restarts.
# this is very unlikely, but quite safe and robust.
px4io recovery
#
# Disable px4io topic limiting
#
if [ $BOARD == fmuv1 ]
then
px4io limit 200
else
px4io limit 400
fi
else
# SOS
tone_alarm error
#
# Allow PX4IO to recover from midair restarts.
# this is very unlikely, but quite safe and robust.
#
px4io recovery
#
# Adjust PX4IO update rate limit
#
set PX4IO_LIMIT 400
if hw_ver compare PX4FMU_V1
then
set PX4IO_LIMIT 200
fi
echo "[init] Set PX4IO update rate limit: $PX4IO_LIMIT Hz"
px4io limit $PX4IO_LIMIT

4
ROMFS/px4fmu_common/init.d/rc.logging
View File

@ -1,11 +1,11 @@
#!nsh
#
# Initialise logging services.
# Initialize logging services.
#
if [ -d /fs/microsd ]
then
if [ $BOARD == fmuv1 ]
if hw_ver compare PX4FMU_V1
then
sdlog2 start -r 50 -a -b 16 -t
else

24
ROMFS/px4fmu_common/init.d/rc.mc_apps Normal file
View File

@ -0,0 +1,24 @@
#!nsh
#
# Standard apps for multirotors
#
#
# Start the attitude estimator
#
attitude_estimator_ekf start
#
# Start position estimator
#
position_estimator_inav start
#
# Start attitude control
#
multirotor_att_control start
#
# Start position control
#
multirotor_pos_control start

49
ROMFS/px4fmu_common/init.d/rc.mc_interface
View File

@ -1,49 +0,0 @@
#!nsh
#
# Script to set PWM min / max limits and mixer
#
#
# Load mixer
#
if [ $FRAME_GEOMETRY == x ]
then
echo "Frame geometry X"
mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix
else
if [ $FRAME_GEOMETRY == w ]
then
echo "Frame geometry W"
mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix
else
echo "Frame geometry +"
mixer load /dev/pwm_output /etc/mixers/FMU_quad_+.mix
fi
fi
if [ $FRAME_COUNT == 4 ]
then
set OUTPUTS 1234
param set MAV_TYPE 2
else
if [ $FRAME_COUNT == 6 ]
then
set OUTPUTS 123456
param set MAV_TYPE 13
else
set OUTPUTS 12345678
fi
fi
#
# Set PWM output frequency
#
pwm rate -c $OUTPUTS -r $PWM_RATE
#
# Set disarmed, min and max PWM signals (for DJI ESCs)
#
pwm disarmed -c $OUTPUTS -p $PWM_DISARMED
pwm min -c $OUTPUTS -p $PWM_MIN
pwm max -c $OUTPUTS -p $PWM_MAX

39
ROMFS/px4fmu_common/init.d/rc.multirotor
View File

@ -1,39 +0,0 @@
#!nsh
#
# Standard everything needed for multirotors except mixer, actuator output and mavlink
#
#
# Start the sensors and test them.
#
sh /etc/init.d/rc.sensors
#
# Start logging (depends on sensors)
#
sh /etc/init.d/rc.logging
#
# Start GPS interface (depends on orb)
#
gps start
#
# Start the attitude estimator
#
attitude_estimator_ekf start
#
# Start position estimator
#
position_estimator_inav start
#
# Start attitude control
#
multirotor_att_control start
#
# Start position control
#
multirotor_pos_control start

94
ROMFS/px4fmu_common/init.d/rc.octo
View File

@ -1,94 +0,0 @@
#!nsh
echo "[init] Octorotor startup"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.004
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 7.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.0
param set MC_YAWRATE_D 0.005
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_P 0.3
param set NAV_TAKEOFF_ALT 3.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.7
param set MPC_THR_MIN 0.3
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE list: https://pixhawk.ethz.ch/mavlink/
# 14 = octorotor
#
param set MAV_TYPE 14
set EXIT_ON_END no
#
# Start and configure PX4IO interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# This is not possible on an octo
tone_alarm error
fi
#
# Load mixer
#
mixer load /dev/pwm_output $MIXER
#
# Set PWM output frequency to 400 Hz
#
pwm rate -a -r 400
#
# Set disarmed, min and max PWM signals
#
pwm disarmed -c 12345678 -p 900
pwm min -c 12345678 -p 1100
pwm max -c 12345678 -p 1900
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
if [ $EXIT_ON_END == yes ]
then
exit
fi

23
ROMFS/px4fmu_common/init.d/rc.sensors
View File

@ -10,41 +10,42 @@
ms5611 start
adc start
# mag might be external
# Mag might be external
if hmc5883 start
then
echo "using HMC5883"
echo "[init] Using HMC5883"
fi
if mpu6000 start
then
echo "using MPU6000"
echo "[init] Using MPU6000"
fi
if l3gd20 start
then
echo "using L3GD20(H)"
echo "[init] Using L3GD20(H)"
fi
if lsm303d start
if hw_ver compare PX4FMU_V2
then
set BOARD fmuv2
else
set BOARD fmuv1
if lsm303d start
then
echo "[init] Using LSM303D"
fi
fi
# Start airspeed sensors
if meas_airspeed start
then
echo "using MEAS airspeed sensor"
echo "[init] Using MEAS airspeed sensor"
else
if ets_airspeed start
then
echo "using ETS airspeed sensor (bus 3)"
echo "[init] Using ETS airspeed sensor (bus 3)"
else
if ets_airspeed start -b 1
then
echo "Using ETS airspeed sensor (bus 1)"
echo "[init] Using ETS airspeed sensor (bus 1)"
fi
fi
fi

13
ROMFS/px4fmu_common/init.d/rc.standalone
View File

@ -1,13 +0,0 @@
#!nsh
#
# Flight startup script for PX4FMU standalone configuration.
#
echo "[init] doing standalone PX4FMU startup..."
#
# Start the ORB
#
uorb start
echo "[init] startup done"

33
ROMFS/px4fmu_common/init.d/rc.usb
View File

@ -36,39 +36,6 @@ then
echo "Commander started"
fi
# Start px4io if present
if px4io start
then
echo "PX4IO driver started"
else
if fmu mode_serial
then
echo "FMU driver started"
fi
fi
# Start sensors
sh /etc/init.d/rc.sensors
# Start one of the estimators
if attitude_estimator_ekf status
then
echo "multicopter att filter running"
else
if att_pos_estimator_ekf status
then
echo "fixedwing att filter running"
else
attitude_estimator_ekf start
fi
fi
# Start GPS
if gps start
then
echo "GPS started"
fi
echo "MAVLink started, exiting shell.."
# Exit shell to make it available to MAVLink

765
ROMFS/px4fmu_common/init.d/rcS
View File

@ -8,39 +8,39 @@
#
set MODE autostart
set logfile /fs/microsd/bootlog.txt
set LOG_FILE /fs/microsd/bootlog.txt
set RC_FILE /fs/microsd/etc/rc.txt
set CONFIG_FILE /fs/microsd/etc/config.txt
set EXTRAS_FILE /fs/microsd/etc/extras.txt
set TUNE_OUT_ERROR ML<<CP4CP4CP4CP4CP4
#
# Try to mount the microSD card.
#
echo "[init] looking for microSD..."
echo "[init] Looking for microSD..."
if mount -t vfat /dev/mmcsd0 /fs/microsd
then
echo "[init] card mounted at /fs/microsd"
echo "[init] microSD card mounted at /fs/microsd"
# Start playing the startup tune
tone_alarm start
else
echo "[init] no microSD card found"
echo "[init] No microSD card found"
# Play SOS
tone_alarm error
fi
#
# Look for an init script on the microSD card.
# Disable autostart if the script found.
#
# To prevent automatic startup in the current flight mode,
# the script should set MODE to some other value.
#
if [ -f /fs/microsd/etc/rc ]
if [ -f $RC_FILE ]
then
echo "[init] reading /fs/microsd/etc/rc"
sh /fs/microsd/etc/rc
fi
# Also consider rc.txt files
if [ -f /fs/microsd/etc/rc.txt ]
then
echo "[init] reading /fs/microsd/etc/rc.txt"
sh /fs/microsd/etc/rc.txt
echo "[init] Executing init script: $RC_FILE"
sh $RC_FILE
set MODE custom
else
echo "[init] Init script not found: $RC_FILE"
fi
# if this is an APM build then there will be a rc.APM script
@ -52,20 +52,19 @@ then
echo "[init] USB interface connected"
fi
echo "Running rc.APM"
echo "[init] Running rc.APM"
# if APM startup is successful then nsh will exit
sh /etc/init.d/rc.APM
fi
if [ $MODE == autostart ]
then
echo "[init] AUTOSTART mode"
#
# Start terminal
# Start CDC/ACM serial driver
#
if sercon
then
echo "USB connected"
fi
sercon
#
# Start the ORB (first app to start)
@ -73,27 +72,20 @@ then
uorb start
#
# Load microSD params
# Load parameters
#
set PARAM_FILE /fs/microsd/params
if mtd start
then
param select /fs/mtd_params
if param load /fs/mtd_params
then
else
echo "FAILED LOADING PARAMS"
fi
set PARAM_FILE /fs/mtd_params
fi
param select $PARAM_FILE
if param load
then
echo "[init] Parameters loaded: $PARAM_FILE"
else
param select /fs/microsd/params
if [ -f /fs/microsd/params ]
then
if param load /fs/microsd/params
then
echo "Parameters loaded"
else
echo "Parameter file corrupt - ignoring"
fi
fi
echo "[init] ERROR: Parameters loading failed: $PARAM_FILE"
fi
#
@ -101,355 +93,416 @@ then
#
if rgbled start
then
echo "Using external RGB Led"
echo "[init] Using external RGB Led"
else
if blinkm start
then
echo "[init] Using blinkm"
blinkm systemstate
fi
fi
#
# Set default values
#
set HIL no
set VEHICLE_TYPE none
set MIXER none
set USE_IO yes
set OUTPUT_MODE none
set PWM_OUTPUTS none
set PWM_RATE none
set PWM_DISARMED none
set PWM_MIN none
set PWM_MAX none
set MKBLCTRL_MODE none
set FMU_MODE pwm
set MAV_TYPE none
#
# Set DO_AUTOCONFIG flag to use it in AUTOSTART scripts
#
if param compare SYS_AUTOCONFIG 1
then
set DO_AUTOCONFIG yes
else
set DO_AUTOCONFIG no
fi
#
# Set parameters and env variables for selected AUTOSTART
#
if param compare SYS_AUTOSTART 0
then
echo "[init] Don't try to find autostart script"
else
sh /etc/init.d/rc.autostart
fi
#
# Override parameters from user configuration file
#
if [ -f $CONFIG_FILE ]
then
echo "[init] Reading config: $CONFIG_FILE"
sh $CONFIG_FILE
else
echo "[init] Config file not found: $CONFIG_FILE"
fi
#
# If autoconfig parameter was set, reset it and save parameters
#
if [ $DO_AUTOCONFIG == yes ]
then
param set SYS_AUTOCONFIG 0
param save
fi
set IO_PRESENT no
if [ $USE_IO == yes ]
then
#
# Check if PX4IO present and update firmware if needed
#
if [ -f /etc/extras/px4io-v2_default.bin ]
then
set IO_FILE /etc/extras/px4io-v2_default.bin
else
set IO_FILE /etc/extras/px4io-v1_default.bin
fi
if px4io checkcrc $IO_FILE
then
echo "[init] PX4IO CRC OK"
echo "PX4IO CRC OK" >> $LOG_FILE
set IO_PRESENT yes
else
echo "[init] PX4IO CRC failure, trying to update"
echo "PX4IO CRC failure" >> $LOG_FILE
tone_alarm MLL32CP8MB
if px4io forceupdate 14662 $IO_FILE
then
usleep 500000
if px4io checkcrc $IO_FILE
then
echo "[init] PX4IO CRC OK, update successful"
echo "PX4IO CRC OK after updating" >> $LOG_FILE
tone_alarm MLL8CDE
set IO_PRESENT yes
else
echo "[init] ERROR: PX4IO update failed"
echo "PX4IO update failed" >> $LOG_FILE
fi
else
echo "[init] ERROR: PX4IO update failed"
echo "PX4IO update failed" >> $LOG_FILE
fi
fi
if [ $IO_PRESENT == no ]
then
echo "[init] ERROR: PX4IO not found"
tone_alarm $TUNE_OUT_ERROR
fi
fi
#
# Set default output if not set
#
if [ $OUTPUT_MODE == none ]
then
if [ $USE_IO == yes ]
then
set OUTPUT_MODE io
else
set OUTPUT_MODE fmu
fi
fi
if [ $OUTPUT_MODE == io -a $IO_PRESENT != yes ]
then
# Need IO for output but it not present, disable output
set OUTPUT_MODE none
echo "[init] ERROR: PX4IO not found, disabling output"
# Avoid using ttyS0 for MAVLink on FMUv1
if hw_ver compare PX4FMU_V1
then
set FMU_MODE serial
fi
fi
if [ $HIL == yes ]
then
set OUTPUT_MODE hil
if hw_ver compare PX4FMU_V1
then
set FMU_MODE serial
fi
else
# Try to get an USB console if not in HIL mode
nshterm /dev/ttyACM0 &
fi
#
# Start the Commander (needs to be this early for in-air-restarts)
#
commander start
if param compare SYS_AUTOSTART 1000
then
sh /etc/init.d/1000_rc_fw_easystar.hil
set MODE custom
fi
if param compare SYS_AUTOSTART 1001
then
sh /etc/init.d/1001_rc_quad.hil
set MODE custom
fi
if param compare SYS_AUTOSTART 1002
then
sh /etc/init.d/1002_rc_fw_state.hil
set MODE custom
fi
if param compare SYS_AUTOSTART 1003
then
sh /etc/init.d/1003_rc_quad_+.hil
set MODE custom
fi
if param compare SYS_AUTOSTART 1004
then
sh /etc/init.d/1004_rc_fw_Rascal110.hil
set MODE custom
fi
if [ $MODE != custom ]
then
# Try to get an USB console
nshterm /dev/ttyACM0 &
fi
#
# Upgrade PX4IO firmware
# Start primary output
#
if [ -f /etc/extras/px4io-v2_default.bin ]
then
set io_file /etc/extras/px4io-v2_default.bin
else
set io_file /etc/extras/px4io-v1_default.bin
fi
if px4io start
then
echo "PX4IO OK"
echo "PX4IO OK" >> $logfile
fi
set TTYS1_BUSY no
if px4io checkcrc $io_file
# If OUTPUT_MODE == none then something is wrong with setup and we shouldn't try to enable output
if [ $OUTPUT_MODE != none ]
then
echo "PX4IO CRC OK"
echo "PX4IO CRC OK" >> $logfile
else
echo "PX4IO CRC failure"
echo "PX4IO CRC failure" >> $logfile
tone_alarm MBABGP
if px4io forceupdate 14662 $io_file
if [ $OUTPUT_MODE == io ]
then
usleep 500000
echo "[init] Use PX4IO PWM as primary output"
if px4io start
then
echo "PX4IO restart OK"
echo "PX4IO restart OK" >> $logfile
tone_alarm MSPAA
echo "[init] PX4IO started"
sh /etc/init.d/rc.io
else
echo "PX4IO restart failed"
echo "PX4IO restart failed" >> $logfile
tone_alarm MNGGG
sleep 10
reboot
echo "[init] ERROR: PX4IO start failed"
tone_alarm $TUNE_OUT_ERROR
fi
fi
if [ $OUTPUT_MODE == fmu ]
then
echo "[init] Use FMU PWM as primary output"
if fmu mode_$FMU_MODE
then
echo "[init] FMU mode_$FMU_MODE started"
else
echo "[init] ERROR: FMU mode_$FMU_MODE start failed"
tone_alarm $TUNE_OUT_ERROR
fi
if hw_ver compare PX4FMU_V1
then
if [ $FMU_MODE == pwm -o $FMU_MODE == gpio ]
then
set TTYS1_BUSY yes
fi
if [ $FMU_MODE == pwm_gpio ]
then
set TTYS1_BUSY yes
fi
fi
fi
if [ $OUTPUT_MODE == mkblctrl ]
then
echo "[init] Use MKBLCTRL as primary output"
set MKBLCTRL_ARG ""
if [ $MKBLCTRL_MODE == x ]
then
set MKBLCTRL_ARG "-mkmode x"
fi
if [ $MKBLCTRL_MODE == + ]
then
set MKBLCTRL_ARG "-mkmode +"
fi
if mkblctrl $MKBLCTRL_ARG
then
echo "[init] MKBLCTRL started"
else
echo "[init] ERROR: MKBLCTRL start failed"
tone_alarm $TUNE_OUT_ERROR
fi
fi
if [ $OUTPUT_MODE == hil ]
then
echo "[init] Use HIL as primary output"
if hil mode_pwm
then
echo "[init] HIL output started"
else
echo "[init] ERROR: HIL output start failed"
tone_alarm $TUNE_OUT_ERROR
fi
fi
#
# Start IO or FMU for RC PPM input if needed
#
if [ $IO_PRESENT == yes ]
then
if [ $OUTPUT_MODE != io ]
then
if px4io start
then
echo "[init] PX4IO started"
sh /etc/init.d/rc.io
else
echo "[init] ERROR: PX4IO start failed"
tone_alarm $TUNE_OUT_ERROR
fi
fi
else
echo "PX4IO update failed"
echo "PX4IO update failed" >> $logfile
tone_alarm MNGGG
if [ $OUTPUT_MODE != fmu ]
then
if fmu mode_$FMU_MODE
then
echo "[init] FMU mode_$FMU_MODE started"
else
echo "[init] ERROR: FMU mode_$FMU_MODE start failed"
tone_alarm $TUNE_OUT_ERROR
fi
if hw_ver compare PX4FMU_V1
then
if [ $FMU_MODE == pwm -o $FMU_MODE == gpio ]
then
set TTYS1_BUSY yes
fi
if [ $FMU_MODE == pwm_gpio ]
then
set TTYS1_BUSY yes
fi
fi
fi
fi
fi
#
# MAVLink
#
set EXIT_ON_END no
#
# Check if auto-setup from one of the standard scripts is wanted
# SYS_AUTOSTART = 0 means no autostart (default)
#
# AUTOSTART PARTITION:
# 0 .. 999 Reserved (historical)
# 1000 .. 1999 Simulation setups
# 2000 .. 2999 Standard planes
# 3000 .. 3999 Flying wing
# 4000 .. 4999 Quad X
# 5000 .. 5999 Quad +
# 6000 .. 6999 Hexa X
# 7000 .. 7999 Hexa +
# 8000 .. 8999 Octo X
# 9000 .. 9999 Octo +
# 10000 .. 10999 Wide arm / H frame
# 11000 .. 11999 Hexa Cox
# 12000 .. 12999 Octo Cox
if param compare SYS_AUTOSTART 4008 8
if [ $HIL == yes ]
then
sh /etc/init.d/4008_ardrone
set MODE custom
fi
if param compare SYS_AUTOSTART 4009 9
then
sh /etc/init.d/4009_ardrone_flow
set MODE custom
fi
if param compare SYS_AUTOSTART 4010 10
then
set FRAME_GEOMETRY x
set FRAME_COUNT 4
set PWM_MIN 1200
set PWM_MAX 1900
set PWM_DISARMED 900
sh /etc/init.d/4010_dji_f330
set MODE custom
fi
if param compare SYS_AUTOSTART 4011 11
then
sh /etc/init.d/4011_dji_f450
set MODE custom
fi
if param compare SYS_AUTOSTART 4012
then
sh /etc/init.d/666_fmu_q_x550
set MODE custom
fi
if param compare SYS_AUTOSTART 6012 12
then
set MIXER /etc/mixers/FMU_hex_x.mix
sh /etc/init.d/rc.hexa
set MODE custom
fi
if param compare SYS_AUTOSTART 7013 13
then
set MIXER /etc/mixers/FMU_hex_+.mix
sh /etc/init.d/rc.hexa
set MODE custom
fi
if param compare SYS_AUTOSTART 8001
then
set MIXER /etc/mixers/FMU_octo_x.mix
sh /etc/init.d/rc.octo
set MODE custom
fi
if param compare SYS_AUTOSTART 9001
then
set MIXER /etc/mixers/FMU_octo_+.mix
sh /etc/init.d/rc.octo
set MODE custom
fi
if param compare SYS_AUTOSTART 12001
then
set MIXER /etc/mixers/FMU_octo_cox.mix
sh /etc/init.d/rc.octo
set MODE custom
fi
if param compare SYS_AUTOSTART 10015 15
then
sh /etc/init.d/10015_tbs_discovery
set MODE custom
fi
if param compare SYS_AUTOSTART 10016 16
then
sh /etc/init.d/10016_3dr_iris
set MODE custom
fi
# PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame
if param compare SYS_AUTOSTART 4017 17
then
set MKBLCTRL_MODE no
set MKBLCTRL_FRAME x
sh /etc/init.d/rc.custom_dji_f330_mkblctrl
set MODE custom
fi
# PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame
if param compare SYS_AUTOSTART 5018 18
then
set MKBLCTRL_MODE no
set MKBLCTRL_FRAME +
sh /etc/init.d/rc.custom_dji_f330_mkblctrl
set MODE custom
fi
# PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame Mikrokopter-Addressing
if param compare SYS_AUTOSTART 4019 19
then
set MKBLCTRL_MODE yes
set MKBLCTRL_FRAME x
sh /etc/init.d/rc.custom_dji_f330_mkblctrl
set MODE custom
fi
# PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame Mikrokopter-Addressing
if param compare SYS_AUTOSTART 5020 20
then
set MKBLCTRL_MODE yes
set MKBLCTRL_FRAME +
sh /etc/init.d/rc.custom_dji_f330_mkblctrl
set MODE custom
fi
# PX4FMU v1 with IO + PPM-based ESCs on Quad X-shape frame
if param compare SYS_AUTOSTART 4021 21
then
set FRAME_GEOMETRY x
set ESC_MAKER afro
sh /etc/init.d/rc.custom_io_esc
set MODE custom
fi
# PX4FMU v1 with IO + PPM-based ESCs on Quad X-shape frame
if param compare SYS_AUTOSTART 10022 22
then
set FRAME_GEOMETRY w
sh /etc/init.d/rc.custom_io_esc
set MODE custom
fi
if param compare SYS_AUTOSTART 3030 30
then
sh /etc/init.d/3030_io_camflyer
set MODE custom
fi
if param compare SYS_AUTOSTART 3031 31
then
sh /etc/init.d/3031_io_phantom
set MODE custom
fi
if param compare SYS_AUTOSTART 3032 32
then
sh /etc/init.d/3032_skywalker_x5
set MODE custom
fi
if param compare SYS_AUTOSTART 3033 33
then
sh /etc/init.d/3033_io_wingwing
set MODE custom
fi
if param compare SYS_AUTOSTART 3034 34
then
sh /etc/init.d/3034_io_fx79
set MODE custom
fi
if param compare SYS_AUTOSTART 40
then
sh /etc/init.d/40_io_segway
set MODE custom
fi
if param compare SYS_AUTOSTART 2100 100
then
sh /etc/init.d/2100_mpx_easystar
set MODE custom
fi
if param compare SYS_AUTOSTART 2101 101
then
sh /etc/init.d/2101_hk_bixler
set MODE custom
fi
if param compare SYS_AUTOSTART 2102 102
then
sh /etc/init.d/2102_3dr_skywalker
set MODE custom
fi
if param compare SYS_AUTOSTART 800
then
sh /etc/init.d/800_sdlogger
set MODE custom
fi
# Start any custom extensions that might be missing
if [ -f /fs/microsd/etc/rc.local ]
then
sh /fs/microsd/etc/rc.local
fi
# If none of the autostart scripts triggered, get a minimal setup
if [ $MODE == autostart ]
then
# Telemetry port is on both FMU boards ttyS1
# but the AR.Drone motors can be get 'flashed'
# if starting MAVLink on them - so do not
# start it as default (default link: USB)
# Start commander
commander start
# Start px4io if present
if px4io detect
sleep 1
mavlink start -b 230400 -d /dev/ttyACM0
usleep 5000
else
if [ $TTYS1_BUSY == yes ]
then
px4io start
# Start MAVLink on ttyS0, because FMU ttyS1 pins configured as something else
mavlink start -d /dev/ttyS0
usleep 5000
# Exit from nsh to free port for mavlink
set EXIT_ON_END yes
else
if fmu mode_serial
# Start MAVLink on default port: ttyS1
mavlink start
usleep 5000
fi
fi
#
# Sensors, Logging, GPS
#
echo "[init] Start sensors"
sh /etc/init.d/rc.sensors
if [ $HIL == no ]
then
echo "[init] Start logging"
sh /etc/init.d/rc.logging
echo "[init] Start GPS"
gps start
fi
#
# Fixed wing setup
#
if [ $VEHICLE_TYPE == fw ]
then
echo "[init] Vehicle type: FIXED WING"
if [ $MIXER == none ]
then
# Set default mixer for fixed wing if not defined
set MIXER FMU_AERT
fi
if [ $MAV_TYPE == none ]
then
# Use MAV_TYPE = 1 (fixed wing) if not defined
set MAV_TYPE 1
fi
param set MAV_TYPE $MAV_TYPE
# Load mixer and configure outputs
sh /etc/init.d/rc.interface
# Start standard fixedwing apps
sh /etc/init.d/rc.fw_apps
fi
#
# Multicopters setup
#
if [ $VEHICLE_TYPE == mc ]
then
echo "[init] Vehicle type: MULTICOPTER"
if [ $MIXER == none ]
then
# Set default mixer for multicopter if not defined
set MIXER quad_x
fi
if [ $MAV_TYPE == none ]
then
# Use MAV_TYPE = 2 (quadcopter) if not defined
set MAV_TYPE 2
# Use mixer to detect vehicle type
if [ $MIXER == FMU_hex_x -o $MIXER == FMU_hex_+ ]
then
echo "FMU driver (no PWM) started"
param set MAV_TYPE 13
fi
if [ $MIXER == FMU_octo_x -o $MIXER == FMU_octo_+ ]
then
param set MAV_TYPE 14
fi
if [ $MIXER == FMU_octo_cox ]
then
param set MAV_TYPE 14
fi
fi
# Start sensors
sh /etc/init.d/rc.sensors
# Start one of the estimators
attitude_estimator_ekf start
# Start GPS
gps start
param set MAV_TYPE $MAV_TYPE
# Load mixer and configure outputs
sh /etc/init.d/rc.interface
# Start standard multicopter apps
sh /etc/init.d/rc.mc_apps
fi
#
# Generic setup (autostart ID not found)
#
if [ $VEHICLE_TYPE == none ]
then
echo "[init] Vehicle type: GENERIC"
# Load mixer and configure outputs
sh /etc/init.d/rc.interface
fi
# Start any custom addons
if [ -f $EXTRAS_FILE ]
then
echo "[init] Starting addons script: $EXTRAS_FILE"
sh $EXTRAS_FILE
else
echo "[init] Addons script not found: $EXTRAS_FILE"
fi
if [ $EXIT_ON_END == yes ]

1
makefiles/config_px4fmu-v1_default.mk
View File

@ -57,6 +57,7 @@ MODULES += systemcmds/top
MODULES += systemcmds/tests
MODULES += systemcmds/config
MODULES += systemcmds/nshterm
MODULES += systemcmds/hw_ver
#
# General system control

1
makefiles/config_px4fmu-v2_default.mk
View File

@ -60,6 +60,7 @@ MODULES += systemcmds/tests
MODULES += systemcmds/config
MODULES += systemcmds/nshterm
MODULES += systemcmds/mtd
MODULES += systemcmds/hw_ver
#
# General system control

1
makefiles/config_px4fmu-v2_test.mk
View File

@ -23,6 +23,7 @@ MODULES += systemcmds/reboot
MODULES += systemcmds/tests
MODULES += systemcmds/nshterm
MODULES += systemcmds/mtd
MODULES += systemcmds/hw_ver
#
# Library modules

8
src/modules/sdlog2/sdlog2_version.h → src/lib/version/version.h
View File

@ -33,15 +33,15 @@
****************************************************************************/
/**
* @file sdlog2_version.h
* @file version.h
*
* Tools for system version detection.
*
* @author Anton Babushkin <anton.babushkin@me.com>
*/
#ifndef SDLOG2_VERSION_H_
#define SDLOG2_VERSION_H_
#ifndef VERSION_H_
#define VERSION_H_
/*
GIT_VERSION is defined at build time via a Makefile call to the
@ -59,4 +59,4 @@
#define HW_ARCH "PX4FMU_V2"
#endif
#endif /* SDLOG2_VERSION_H_ */
#endif /* VERSION_H_ */

2
src/modules/sdlog2/sdlog2.c
View File

@ -85,13 +85,13 @@
#include <systemlib/systemlib.h>
#include <systemlib/param/param.h>
#include <version/version.h>
#include <mavlink/mavlink_log.h>
#include "logbuffer.h"
#include "sdlog2_format.h"
#include "sdlog2_messages.h"
#include "sdlog2_version.h"
#define LOGBUFFER_WRITE_AND_COUNT(_msg) if (logbuffer_write(&lb, &log_msg, LOG_PACKET_SIZE(_msg))) { \
log_msgs_written++; \

73
src/systemcmds/hw_ver/hw_ver.c Normal file
View File

@ -0,0 +1,73 @@
/****************************************************************************
*
* Copyright (c) 2014 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file hw_ver.c
*
* Show and test hardware version.
*/
#include <nuttx/config.h>
#include <stdio.h>
#include <string.h>
#include <errno.h>
#include <version/version.h>
__EXPORT int hw_ver_main(int argc, char *argv[]);
int
hw_ver_main(int argc, char *argv[])
{
if (argc >= 2) {
if (!strcmp(argv[1], "show")) {
printf(HW_ARCH "\n");
exit(0);
}
if (!strcmp(argv[1], "compare")) {
if (argc >= 3) {
int ret = strcmp(HW_ARCH, argv[2]) != 0;
if (ret == 0) {
printf("hw_ver match: %s\n", HW_ARCH);
}
exit(ret);
} else {
errx(1, "not enough arguments, try 'compare PX4FMU_1'");
}
}
}
errx(1, "expected a command, try 'show' or 'compare'");
}

43
src/systemcmds/hw_ver/module.mk Normal file
View File

@ -0,0 +1,43 @@
############################################################################
#
# Copyright (c) 2014 PX4 Development Team. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name PX4 nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
#
# Show and test hardware version
#
MODULE_COMMAND = hw_ver
SRCS = hw_ver.c
MODULE_STACKSIZE = 1024
MAXOPTIMIZATION = -Os