From b7edb56d6f88d7d853d49f668723a6fad248692d Mon Sep 17 00:00:00 2001 From: patacongo Date: Mon, 19 Dec 2011 23:06:41 +0000 Subject: [PATCH] Add a test for PWM drivers git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@4202 7fd9a85b-ad96-42d3-883c-3090e2eb8679 --- apps/ChangeLog.txt | 2 + apps/examples/Makefile | 4 +- apps/examples/README.txt | 16 + apps/examples/adc/Makefile | 4 +- apps/examples/adc/adc.h | 4 +- apps/examples/adc/adc_main.c | 2 +- apps/examples/pwm/Makefile | 103 ++++++ apps/examples/pwm/pwm.h | 126 +++++++ apps/examples/pwm/pwm_main.c | 308 ++++++++++++++++++ nuttx/ChangeLog | 2 + nuttx/Documentation/NuttX.html | 4 +- nuttx/Documentation/NuttxPortingGuide.html | 54 ++- nuttx/arch/arm/src/stm32/stm32_internal.h | 2 +- nuttx/arch/arm/src/stm32/stm32_pwm.c | 26 +- nuttx/arch/arm/src/stm32/stm32_pwm.h | 8 +- nuttx/configs/stm3240g-eval/include/board.h | 13 + nuttx/configs/stm3240g-eval/nsh/appconfig | 4 + nuttx/configs/stm3240g-eval/nsh/defconfig | 14 +- nuttx/configs/stm3240g-eval/src/Makefile | 4 + .../stm3240g-eval/src/stm3240g-internal.h | 14 + nuttx/configs/stm3240g-eval/src/up_adc.c | 219 +++++++------ nuttx/configs/stm3240g-eval/src/up_pwm.c | 128 ++++++++ nuttx/include/nuttx/pwm.h | 10 +- 23 files changed, 937 insertions(+), 134 deletions(-) create mode 100644 apps/examples/pwm/Makefile create mode 100755 apps/examples/pwm/pwm.h create mode 100644 apps/examples/pwm/pwm_main.c create mode 100644 nuttx/configs/stm3240g-eval/src/up_pwm.c diff --git a/apps/ChangeLog.txt b/apps/ChangeLog.txt index fe8c057fe5..81b041e354 100755 --- a/apps/ChangeLog.txt +++ b/apps/ChangeLog.txt @@ -146,3 +146,5 @@ built for performance evaluation. * apps/examples/adc: Add a very simple test to drive and test an ADC driver. + * apps/examples/pwm: Add an NSH PWM command to drive and test a PWM + driver. diff --git a/apps/examples/Makefile b/apps/examples/Makefile index d549fe28e5..2c82c51453 100644 --- a/apps/examples/Makefile +++ b/apps/examples/Makefile @@ -39,12 +39,12 @@ SUBDIRS = adc buttons dhcpd ftpc hello helloxx hidkbd igmp lcdrw mm mount \ nettest nsh null nx nxffs nxflat nxhello nximage nxlines \ - nxtext ostest pashello pipe poll rgmp romfs sendmail serloop \ + nxtext ostest pashello pipe poll pwm rgmp romfs sendmail serloop \ thttpd tiff touchscreen udp uip usbserial usbstorage usbterm wget wlan # Sub-directories that might need context setup -CNTXTDIRS = +CNTXTDIRS = pwm ifeq ($(CONFIG_NSH_BUILTIN_APPS),y) CNTXTDIRS += adc diff --git a/apps/examples/README.txt b/apps/examples/README.txt index 4460e2c667..ff8dcead1f 100644 --- a/apps/examples/README.txt +++ b/apps/examples/README.txt @@ -678,6 +678,22 @@ examples/poll CONFIGURED_APPS += uiplib +examples/pwm +^^^^^^^^^^^^ + + A test of a PWM device driver. It simply enables a pulsed output for + a specified frequency and duty for a specified period of time. This + example can ONLY be built as an NSH built-in function. + + CONFIG_NSH_BUILTIN_APPS - Build the PWM test as an NSH built-in function. + Default: Not built! The example can only be used as an NSH built-in + application + CONFIG_EXAMPLES_PWM_DEVPATH - The path to the PWM device. Default: /dev/pwm0 + CONFIG_EXAMPLES_PWM_FREQUENCY - The initial PWM frequency. Default: 100 Hz + CONFIG_EXAMPLES_PWM_DUTYPCT - The initial PWM duty as a percentage. Default: 50% + CONFIG_EXAMPLES_PWM_DURATION - The initial PWM pulse train duration in sectonds. + as a percentage. Default: 5 seconds + examples/rgmp ^^^^^^^^^^^^^ diff --git a/apps/examples/adc/Makefile b/apps/examples/adc/Makefile index d9b2162e93..6357dfc3db 100644 --- a/apps/examples/adc/Makefile +++ b/apps/examples/adc/Makefile @@ -1,8 +1,8 @@ ############################################################################ -# apps/examples/touchscreen/Makefile +# apps/examples/adc/Makefile # # Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt +# Author: Gregory Nutt # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions diff --git a/apps/examples/adc/adc.h b/apps/examples/adc/adc.h index 901f84940a..214ecc6c85 100755 --- a/apps/examples/adc/adc.h +++ b/apps/examples/adc/adc.h @@ -1,8 +1,8 @@ /**************************************************************************** - * examples/examples/adc.h + * examples/examples/adc/adc.h * * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt + * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/apps/examples/adc/adc_main.c b/apps/examples/adc/adc_main.c index e685f862d4..f0876bb60c 100644 --- a/apps/examples/adc/adc_main.c +++ b/apps/examples/adc/adc_main.c @@ -132,10 +132,10 @@ int MAIN_NAME(int argc, char *argv[]) errval = 1; goto errout; } - message(MAIN_STRING "Hardware initialized. Opening the ADC device\n"); /* Open the ADC device for reading */ + message(MAIN_STRING "Hardware initialized. Opening the ADC device\n"); fd = open(CONFIG_EXAMPLES_ADC_DEVPATH, O_RDONLY); if (fd < 0) { diff --git a/apps/examples/pwm/Makefile b/apps/examples/pwm/Makefile new file mode 100644 index 0000000000..3c9c243cbd --- /dev/null +++ b/apps/examples/pwm/Makefile @@ -0,0 +1,103 @@ +############################################################################ +# apps/examples/pwm/Makefile +# +# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +-include $(TOPDIR)/.config +-include $(TOPDIR)/Make.defs +include $(APPDIR)/Make.defs + +# NuttX NX Graphics Example. + +ASRCS = +CSRCS = pwm_main.c + +AOBJS = $(ASRCS:.S=$(OBJEXT)) +COBJS = $(CSRCS:.c=$(OBJEXT)) + +SRCS = $(ASRCS) $(CSRCS) +OBJS = $(AOBJS) $(COBJS) + +ifeq ($(WINTOOL),y) + BIN = "${shell cygpath -w $(APPDIR)/libapps$(LIBEXT)}" +else + BIN = "$(APPDIR)/libapps$(LIBEXT)" +endif + +ROOTDEPPATH = --dep-path . + +# Touchscreen built-in application info + +APPNAME = pwm +PRIORITY = SCHED_PRIORITY_DEFAULT +STACKSIZE = 2048 + +# Common build + +VPATH = + +all: .built +.PHONY: context clean depend distclean + +$(AOBJS): %$(OBJEXT): %.S + $(call ASSEMBLE, $<, $@) + +$(COBJS): %$(OBJEXT): %.c + $(call COMPILE, $<, $@) + +.built: $(OBJS) + @( for obj in $(OBJS) ; do \ + $(call ARCHIVE, $(BIN), $${obj}); \ + done ; ) + @touch .built + +.context: + $(call REGISTER,$(APPNAME),$(PRIORITY),$(STACKSIZE),$(APPNAME)_main) + @touch $@ + +context: .context + +.depend: Makefile $(SRCS) + @$(MKDEP) $(ROOTDEPPATH) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep + @touch $@ + +depend: .depend + +clean: + @rm -f *.o *~ .*.swp .built + $(call CLEAN) + +distclean: clean + @rm -f Make.dep .depend + +-include Make.dep diff --git a/apps/examples/pwm/pwm.h b/apps/examples/pwm/pwm.h new file mode 100755 index 0000000000..83d87517c2 --- /dev/null +++ b/apps/examples/pwm/pwm.h @@ -0,0 +1,126 @@ +/**************************************************************************** + * examples/examples/pwm.h + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#ifndef __APPS_EXAMPLES_PWM_PWM_H +#define __APPS_EXAMPLES_PWM_PWM_H + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +/**************************************************************************** + * Definitions + ****************************************************************************/ +/* Configuration ************************************************************/ +/* CONFIG_NSH_BUILTIN_APPS - Build the PWM test as an NSH built-in function. + * Default: Not built! The example can only be used as an NSH built-in + * application + * CONFIG_EXAMPLES_PWM_DEVPATH - The path to the PWM device. Default: /dev/pwm0 + * CONFIG_EXAMPLES_PWM_FREQUENCY - The initial PWM frequency. Default: 100 Hz + * CONFIG_EXAMPLES_PWM_DUTYPCT - The initial PWM duty as a percentage. Default: 50% + * CONFIG_EXAMPLES_PWM_DURATION - The initial PWM pulse train duration in sectonds. + * as a percentage. Default: 5 seconds + */ + +#ifndef CONFIG_PWM +# error "PWM device support is not enabled (CONFIG_PWM)" +#endif + +#ifndef CONFIG_NSH_BUILTIN_APPS +# warning "The PWM example only works as an NSH built-in application (CONFIG_NSH_BUILTIN_APPS)" +#endif + +#ifndef CONFIG_EXAMPLES_PWM_DEVPATH +# define CONFIG_EXAMPLES_PWM_DEVPATH "/dev/pwm0" +#endif + +#ifndef CONFIG_EXAMPLES_PWM_FREQUENCY +# define CONFIG_EXAMPLES_PWM_FREQUENCY 100 +#endif + +#ifndef CONFIG_EXAMPLES_PWM_DUTYPCT +# define CONFIG_EXAMPLES_PWM_DUTYPCT 50 +#endif + +#ifndef CONFIG_EXAMPLES_PWM_DURATION +# define CONFIG_EXAMPLES_PWM_DURATION 5 +#endif + +/* Debug ********************************************************************/ + +#ifdef CONFIG_CPP_HAVE_VARARGS +# ifdef CONFIG_DEBUG +# define message(...) lib_rawprintf(__VA_ARGS__) +# define msgflush() +# else +# define message(...) printf(__VA_ARGS__) +# define msgflush() fflush(stdout) +# endif +#else +# ifdef CONFIG_DEBUG +# define message lib_rawprintf +# define msgflush() +# else +# define message printf +# define msgflush() fflush(stdout) +# endif +#endif + +/**************************************************************************** + * Public Types + ****************************************************************************/ + +/**************************************************************************** + * Public Variables + ****************************************************************************/ + +/**************************************************************************** + * Public Function Prototypes + ****************************************************************************/ + +/**************************************************************************** + * Name: pwm_devinit() + * + * Description: + * Perform architecuture-specific initialization of the PWM hardware. This + * interface must be provided by all configurations using apps/examples/pwm + * + ****************************************************************************/ + +int pwm_devinit(void); + +#endif /* __APPS_EXAMPLES_PWM_PWM_H */ diff --git a/apps/examples/pwm/pwm_main.c b/apps/examples/pwm/pwm_main.c new file mode 100644 index 0000000000..18b93f8d13 --- /dev/null +++ b/apps/examples/pwm/pwm_main.c @@ -0,0 +1,308 @@ +/**************************************************************************** + * examples/pwm/pwm_main.c + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +#include "pwm.h" + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/**************************************************************************** + * Private Types + ****************************************************************************/ + +struct pwm_state_s +{ + bool initialized; + uint8_t duty; + uint32_t freq; + int duration; +}; + +/**************************************************************************** + * Private Function Prototypes + ****************************************************************************/ + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +static struct pwm_state_s g_pwmstate; + +/**************************************************************************** + * Public Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: pwm_help + ****************************************************************************/ + +static void pwm_help(FAR struct pwm_state_s *pwm) +{ + message("Usage: pwm [OPTIONS]\n"); + message("\nArguments are \"sticky\". For example, once the PWM frequency is\n"); + message("specified, that frequency will be re-used until it is changed.\n"); + message("\n\"sticky\" OPTIONS include:\n"); + message(" [-f addr] selects the pulse frequency. " + "Default: %d Hz Current: %d Hz\n", + CONFIG_EXAMPLES_PWM_FREQUENCY, pwm->freq); + message(" [-d duty] selcts the pulse duty as a percentage. " + "Default: %d %% Current: %d %%\n", + CONFIG_EXAMPLES_PWM_DUTYPCT, pwm->duty); + message(" [-t duration] is the duration of the pulse train in seconds. " + "Default: %d Current: %d\n", + CONFIG_EXAMPLES_PWM_DURATION, pwm->duration); + message(" [-t] shows this message and extis\n"); +} + +/**************************************************************************** + * Name: arg_string + ****************************************************************************/ + +int arg_string(FAR char **arg, FAR char **value) +{ + FAR char *ptr = *arg; + + if (ptr[2] == '\0') + { + *value = arg[1]; + return 2; + } + else + { + *value = &ptr[2]; + return 1; + } +} + +/**************************************************************************** + * Name: arg_decimal + ****************************************************************************/ + +int arg_decimal(FAR char **arg, FAR long *value) +{ + FAR char *string; + int ret; + + ret = arg_string(arg, &string); + *value = strtol(string, NULL, 10); + return ret; +} + +/**************************************************************************** + * Name: parse_args + ****************************************************************************/ + +void parse_args(FAR struct pwm_state_s *pwm, int argc, FAR char **argv) +{ + FAR char *ptr; + long value; + int index; + int nargs; + + for (index = 1; index < argc; ) + { + ptr = argv[index]; + if (ptr[0] != '-') + { + message("Invalid options format: %s\n", ptr); + exit(0); + } + + switch (ptr[1]) + { + case 'f': + nargs = arg_decimal(&argv[index], &value); + if (value < 1) + { + message("Frequency out of range: %ld\n", value); + exit(1); + } + + pwm->freq = (uint32_t)value; + index += nargs; + break; + + case 'd': + nargs = arg_decimal(&argv[index], &value); + if (value < 1 || value > 99) + { + message("Duty out of range: %ld\n", value); + exit(1); + } + + pwm->duty = (uint8_t)value; + index += nargs; + break; + + case 't': + nargs = arg_decimal(&argv[index], &value); + if (value < 1 || value > INT_MAX) + { + message("Duration out of range: %ld\n", value); + exit(1); + } + + pwm->duration = (int)value; + index += nargs; + break; + + case 'h': + pwm_help(pwm); + exit(0); + + default: + message("Unsupported option: %s\n", ptr); + pwm_help(pwm); + exit(1); + } + } +} + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: user_start/pwm_main + ****************************************************************************/ + +int pwm_main(int argc, char *argv[]) +{ + struct pwm_info_s info; + int fd; + int ret; + + /* Initialize the state data */ + + if (!g_pwmstate.initialized) + { + g_pwmstate.duty = CONFIG_EXAMPLES_PWM_DUTYPCT; + g_pwmstate.freq = CONFIG_EXAMPLES_PWM_FREQUENCY; + g_pwmstate.duration = CONFIG_EXAMPLES_PWM_DURATION; + g_pwmstate.initialized = true; + } + + /* Parse the command line */ + + parse_args(&g_pwmstate, argc, argv); + + /* Initialization of the PWM hardware is performed by logic external to + * this test. + */ + + ret = pwm_devinit(); + if (ret != OK) + { + message("pwm_main: pwm_devinit failed: %d\n", ret); + goto errout; + } + + /* Open the PWM device for reading */ + + fd = open(CONFIG_EXAMPLES_PWM_DEVPATH, O_RDONLY); + if (fd < 0) + { + message("pwm_main: open %s failed: %d\n", + CONFIG_EXAMPLES_PWM_DEVPATH, errno); + goto errout; + } + + /* Configure the characteristics of the pulse train */ + + info.frequency = g_pwmstate.freq; + info.duty = (info.duty < 16) / 100; + + ret = ioctl(fd, PWMIOC_SETCHARACTERISTICS, (unsigned long)((uintptr_t)&info)); + if (ret < 0) + { + message("pwm_main: ioctl(PWMIOC_SETCHARACTERISTICS) failed: %d\n", errno); + goto errout_with_dev; + } + + /* Then start the pulse train */ + + ret = ioctl(fd, PWMIOC_START, 0); + if (ret < 0) + { + message("pwm_main: ioctl(PWMIOC_START) failed: %d\n", errno); + goto errout_with_dev; + } + + /* Wait for the specified duration */ + + sleep(g_pwmstate.duration); + + /* Then stop the pulse train */ + + ret = ioctl(fd, PWMIOC_STOP, 0); + if (ret < 0) + { + message("pwm_main: ioctl(PWMIOC_STOP) failed: %d\n", errno); + goto errout_with_dev; + } + + close(fd); + msgflush(); + return OK; + +errout_with_dev: + close(fd); +errout: + msgflush(); + return ERROR; +} diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index 0962166f51..69f6febf0d 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -2281,5 +2281,7 @@ that this latter bugfix also fixes some STM32 USB performance problems. * configs/hymini-stm32v: A configuration for the HY-Mini STM32v board contributed by Laurent Latil. Theses changes also include support for the STM32F103VCT6. + * arch/configs/stm3240g-eval/src/up_pwm.c: Add hooks needed to use the new + apps/examples/pwm test of the STM32 PWM driver. diff --git a/nuttx/Documentation/NuttX.html b/nuttx/Documentation/NuttX.html index d55c727d2d..d3d4af4f12 100644 --- a/nuttx/Documentation/NuttX.html +++ b/nuttx/Documentation/NuttX.html @@ -8,7 +8,7 @@

NuttX RTOS

-

Last Updated: December 6, 2011

+

Last Updated: December 19, 2011

@@ -463,7 +463,7 @@

  • - Network, USB (host), USB (device), serial, CAN, ADC, DAC driver architectures. + Network, USB (host), USB (device), serial, CAN, ADC, DAC, and PWM driver architectures.
  • diff --git a/nuttx/Documentation/NuttxPortingGuide.html b/nuttx/Documentation/NuttxPortingGuide.html index dc3dbc6728..293b7d683c 100644 --- a/nuttx/Documentation/NuttxPortingGuide.html +++ b/nuttx/Documentation/NuttxPortingGuide.html @@ -12,7 +12,7 @@

    NuttX RTOS Porting Guide

    -

    Last Updated: December 14, 2011

    +

    Last Updated: December 19, 2011

    @@ -126,7 +126,8 @@ 6.3.8 SDIO Device Drivers
    6.3.9 USB Host-Side Drivers
    6.3.10 USB Device-Side Drivers
    - 6.3.11 Analog (ADC/DAC) Drivers + 6.3.11 Analog (ADC/DAC) Drivers
    + 6.3.12 PWM Drivers 6.4 Power Management
      @@ -3120,9 +3121,21 @@ extern void up_ledoff(int led);

    6.3.11 Analog (ADC/DAC) Drivers

    +

    + The NuttX PWM driver is split into two parts: +

    +
      +
    1. + An "upper half", generic driver that provides the comman PWM interface to application level code, and +
    2. +
    3. + A "lower half", platform-specific driver that implements the low-level timer controls to implement the PWM functionality. +
    4. +
    • - General header files for the NuttX analog reside in include/nuttx/analog/. + General header files for the NuttX analog drivers reside in include/nuttx/analog/. + These header files includes both the application level interface to the analog driver as well as the interface between the "upper half" and "lower half" drivers.
    • Common analog logic and share-able analog drivers reside in the drivers/analog/. @@ -3182,6 +3195,41 @@ extern void up_ledoff(int led);
    +

    6.3.12 PWM Drivers

    +

    + For the purposes of this driver, a PWM device is any device that generates periodic output pulses of controlled frequency and pulse width. + Such a device might be used, for example, to perform pulse-width modulated output or frequency/pulse-count modulated output + (such as might be needed to control a stepper motor). +

    +

    + The NuttX PWM driver is split into two parts: +

    +
      +
    1. + An "upper half", generic driver that provides the comman PWM interface to application level code, and +
    2. +
    3. + A "lower half", platform-specific driver that implements the low-level timer controls to implement the PWM functionality. +
    4. +
    + +
      +
    • + The header file for the NuttX PWM driver reside at include/nuttx/pwm.h. + This header file includes both the application level interface to the PWM driver as well as the interface between the "upper half" and "lower half" drivers. + The PWM module uses a standard character driver framework. + However, since the PWM driver is a devices control interface and not a data transfer interface, + the majority of the functionality available to the application is implemented in driver ioctl calls. +
    • +
    • + The generic, "upper half" PWM driver resides at drivers/pwm.c. +
    • +
    • + Platform-specific PWM drivers reside in arch/<architecture>/src/<chip> directory for the specific processor <architecture> and for the specific <chip> analog peripheral devices. +
    • +
    + +

    6.4 Power Management

    6.4.1 Overview

    diff --git a/nuttx/arch/arm/src/stm32/stm32_internal.h b/nuttx/arch/arm/src/stm32/stm32_internal.h index 0c1792230c..8db936786e 100644 --- a/nuttx/arch/arm/src/stm32/stm32_internal.h +++ b/nuttx/arch/arm/src/stm32/stm32_internal.h @@ -2,7 +2,7 @@ * arch/arm/src/stm32/stm32_internal.h * * Copyright (C) 2009-2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt + * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/nuttx/arch/arm/src/stm32/stm32_pwm.c b/nuttx/arch/arm/src/stm32/stm32_pwm.c index 3162d31d1b..1e3f4f07d6 100644 --- a/nuttx/arch/arm/src/stm32/stm32_pwm.c +++ b/nuttx/arch/arm/src/stm32/stm32_pwm.c @@ -343,6 +343,8 @@ static int pwm_setup(FAR struct pwm_lowerhalf_s *dev) { FAR struct stm32_pwmtimer_s *priv = (FAR struct stm32_pwmtimer_s *)dev; + pwmvdbg("TIM%d pincfg: %08x\n", priv->timid, priv->pincfg); + /* Configure the PWM output pin, but do not start the timer yet */ stm32_configgpio(priv->pincfg); @@ -370,6 +372,8 @@ static int pwm_shutdown(FAR struct pwm_lowerhalf_s *dev) FAR struct stm32_pwmtimer_s *priv = (FAR struct stm32_pwmtimer_s *)dev; uint32_t pincfg; + pwmvdbg("TIM%d pincfg: %08x\n", priv->timid, priv->pincfg); + /* Make sure that the output has been stopped */ pwm_stop(dev); @@ -430,6 +434,9 @@ static int pwm_start(FAR struct pwm_lowerhalf_s *dev, FAR const struct pwm_info_ uint16_t ocmode1; uint16_t ocmode2; + pwmvdbg("TIM%d channel: %d frequency: %d duty: %08x\n", + priv->timid, priv->channel, info->frequency, info->duty); + /* Caculate optimal values for the timer prescaler and for the timer reload * register. If' frequency' is the desired frequency, then * @@ -599,6 +606,7 @@ static int pwm_start(FAR struct pwm_lowerhalf_s *dev, FAR const struct pwm_info_ break; default: + pwmdbg("No such channel: %d\n", priv->channel); return -EINVAL; } @@ -681,6 +689,10 @@ static int pwm_start(FAR struct pwm_lowerhalf_s *dev, FAR const struct pwm_info_ cr1 |= GTIM_CR1_CEN; pwm_putreg(priv, STM32_GTIM_CR1_OFFSET, ccmr2); + + pwmvdbg("CR1: %04x CR2:%04x CCER: %08x CCMR1: %08x CCMR2: %08x\n", + cr1, cr2, ccer, ccmr1, ccmr2); + return OK; } @@ -706,6 +718,8 @@ static int pwm_stop(FAR struct pwm_lowerhalf_s *dev) uint32_t regaddr; uint32_t regval; + pwmvdbg("TIM%d\n", priv->timid); + switch (priv->timid) { #ifdef CONFIG_STM32_TIM1_PWM @@ -792,11 +806,13 @@ static int pwm_stop(FAR struct pwm_lowerhalf_s *dev) regval &= ~resetbit; putreg32(regval, regaddr); + + pwmvdbg("regaddr: %08x resetbit: %08x\n", regaddr, resetbit); return OK; } /**************************************************************************** - * Name: + * Name: pwm_ioctl * * Description: * Lower-half logic may support platform-specific ioctl commands @@ -813,8 +829,13 @@ static int pwm_stop(FAR struct pwm_lowerhalf_s *dev) static int pwm_ioctl(FAR struct pwm_lowerhalf_s *dev, int cmd, unsigned long arg) { +#ifdef CONFIG_DEBUG_PWM + FAR struct stm32_pwmtimer_s *priv = (FAR struct stm32_pwmtimer_s *)dev; + /* There are no platform-specific ioctl commands */ + pwmvdbg("TIM%d\n", priv->timid); +#endif return -ENOTTY; } @@ -843,6 +864,8 @@ FAR struct pwm_lowerhalf_s *stm32_pwminitialize(int timer) { FAR struct stm32_pwmtimer_s *lower; + pwmvdbg("TIM%d\n", timer); + switch (timer) { #ifdef CONFIG_STM32_TIM1_PWM @@ -906,6 +929,7 @@ FAR struct pwm_lowerhalf_s *stm32_pwminitialize(int timer) break; #endif default: + pwmdbg("No such timer configured\n"); return NULL; } diff --git a/nuttx/arch/arm/src/stm32/stm32_pwm.h b/nuttx/arch/arm/src/stm32/stm32_pwm.h index bd881d3d41..b7179a7bcb 100644 --- a/nuttx/arch/arm/src/stm32/stm32_pwm.h +++ b/nuttx/arch/arm/src/stm32/stm32_pwm.h @@ -33,8 +33,8 @@ * ************************************************************************************/ -#ifndef __ARCH_ARM_SRC_STM32_STM32_TIM_H -#define __ARCH_ARM_SRC_STM32_STM32_TIM_H +#ifndef __ARCH_ARM_SRC_STM32_STM32_PWM_H +#define __ARCH_ARM_SRC_STM32_STM32_PWM_H /* The STM32 does not have dedicated PWM hardware. Rather, pulsed output control * is a capabilitiy of the STM32 timers. The logic in this file implements the @@ -303,7 +303,7 @@ # endif #endif -#ifdef CONFIG_STM32_TIM14_PWM) +#ifdef CONFIG_STM32_TIM14_PWM # if !defined(CONFIG_STM32_TIM14_CHANNEL) # error "CONFIG_STM32_TIM14_CHANNEL must be provided" # elif CONFIG_STM32_TIM14_CHANNEL == 1 @@ -367,4 +367,4 @@ EXTERN FAR struct pwm_lowerhalf_s *stm32_pwminitialize(int timer); #endif /* __ASSEMBLY__ */ #endif /* CONFIG_STM32_TIMx_PWM */ -#endif /* __ARCH_ARM_SRC_STM32_STM32_TIM_H */ +#endif /* __ARCH_ARM_SRC_STM32_STM32_PWM_H */ diff --git a/nuttx/configs/stm3240g-eval/include/board.h b/nuttx/configs/stm3240g-eval/include/board.h index 663ad7edaf..ba1016910a 100755 --- a/nuttx/configs/stm3240g-eval/include/board.h +++ b/nuttx/configs/stm3240g-eval/include/board.h @@ -263,6 +263,19 @@ #define GPIO_ETH_RMII_TXD0 GPIO_ETH_RMII_TXD0_2 #define GPIO_ETH_RMII_TXD1 GPIO_ETH_RMII_TXD1_2 +/* PWM + * + * The STM3240G-Eval has no real on-board PWM devices, but the board can be configured to output + * a pulse train using TIM4 CH2. This pin is used by FSMC is connect to CN5 just for this + * purpose: + * + * PD13 FSMC_A18 / MC_TIM4_CH2 pin 33 (EnB) + * + * FSMC must be disabled in this case! + */ + +#define GPIO_TIM4_CH2 GPIO_TIM4_CH2_1 + /************************************************************************************ * Public Data ************************************************************************************/ diff --git a/nuttx/configs/stm3240g-eval/nsh/appconfig b/nuttx/configs/stm3240g-eval/nsh/appconfig index c2745c2943..6951578dac 100644 --- a/nuttx/configs/stm3240g-eval/nsh/appconfig +++ b/nuttx/configs/stm3240g-eval/nsh/appconfig @@ -50,4 +50,8 @@ CONFIGURED_APPS += netutils/webclient CONFIGURED_APPS += netutils/tftpc endif +ifeq ($(CONFIG_PWM),y) +CONFIGURED_APPS += examples/pwm +endif + diff --git a/nuttx/configs/stm3240g-eval/nsh/defconfig b/nuttx/configs/stm3240g-eval/nsh/defconfig index 52a7ccfa30..8acd5de7c3 100755 --- a/nuttx/configs/stm3240g-eval/nsh/defconfig +++ b/nuttx/configs/stm3240g-eval/nsh/defconfig @@ -302,6 +302,18 @@ CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004 CONFIG_STM32_ETH_PTP=n CONFIG_STM32_ETHMAC_REGDEBUG=n +# +# PWM configuration +# +# The STM3240G-Eval has no real on-board PWM devices, but the board can be configured to output +# a pulse train using TIM4 CH2. This pin is used by FSMC is connect to CN5 just for this +# purpose. +# +CONFIG_PWM=n +CONFIG_STM32_TIM4=y +CONFIG_STM32_TIM4_PWM=y +CONFIG_STM32_TIM4_CHANNEL=2 + # # General build options # @@ -1113,7 +1125,7 @@ CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 # CONFIG_NSH_FATNSECTORS - FAT FS number of sectors # CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint # -CONFIG_NSH_BUILTIN_APPS=n +CONFIG_NSH_BUILTIN_APPS=y CONFIG_NSH_FILEIOSIZE=512 CONFIG_NSH_STRERROR=n CONFIG_NSH_LINELEN=64 diff --git a/nuttx/configs/stm3240g-eval/src/Makefile b/nuttx/configs/stm3240g-eval/src/Makefile index 2ba46d6829..7d09e145ae 100644 --- a/nuttx/configs/stm3240g-eval/src/Makefile +++ b/nuttx/configs/stm3240g-eval/src/Makefile @@ -46,6 +46,10 @@ ifeq ($(CONFIG_ADC),y) CSRCS += up_adc.c endif +ifeq ($(CONFIG_PWM),y) +CSRCS += up_pwm.c +endif + COBJS = $(CSRCS:.c=$(OBJEXT)) SRCS = $(ASRCS) $(CSRCS) diff --git a/nuttx/configs/stm3240g-eval/src/stm3240g-internal.h b/nuttx/configs/stm3240g-eval/src/stm3240g-internal.h index 051d0be907..4158311912 100644 --- a/nuttx/configs/stm3240g-eval/src/stm3240g-internal.h +++ b/nuttx/configs/stm3240g-eval/src/stm3240g-internal.h @@ -84,6 +84,20 @@ #define GPIO_BTN_TAMPER (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTC|GPIO_PIN13) #define GPIO_BTN_USER (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTG|GPIO_PIN15) +/* PWM + * + * The STM3240G-Eval has no real on-board PWM devices, but the board can be configured to output + * a pulse train using TIM4 CH2. This pin is used by FSMC is connect to CN5 just for this + * purpose: + * + * PD13 FSMC_A18 / MC_TIM4_CH2 pin 33 (EnB) + * + * FSMC must be disabled in this case! + */ + +#define STM3240G_EVAL_PWMTIMER 4 +#define STM3240G_EVAL_PWMCHANNEL 2 + /**************************************************************************************************** * Public Types ****************************************************************************************************/ diff --git a/nuttx/configs/stm3240g-eval/src/up_adc.c b/nuttx/configs/stm3240g-eval/src/up_adc.c index 278d830ee4..7abad06530 100644 --- a/nuttx/configs/stm3240g-eval/src/up_adc.c +++ b/nuttx/configs/stm3240g-eval/src/up_adc.c @@ -1,111 +1,110 @@ -/************************************************************************************ - * configs/stm3240g-eval/src/up_adc.c - * arch/arm/src/board/up_adc.c - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************************/ - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include - -#include - -#include -#include - -#include "chip.h" -#include "up_arch.h" -#include "stm3240g-internal.h" - -#ifdef CONFIG_ADC - -/************************************************************************************ - * Definitions - ************************************************************************************/ - -/* Configuration ************************************************************/ -/* Up to 3 ADC interfaces are supported */ - -#if STM32_NADC < 3 -# undef CONFIG_STM32_ADC3 -#endif - -#if STM32_NADC < 2 -# undef CONFIG_STM32_ADC2 -#endif - -#if STM32_NADC < 1 -# undef CONFIG_STM32_ADC1 -#endif - -#if defined(CONFIG_STM32_ADC1) || defined(CONFIG_STM32_ADC2) || defined(CONFIG_STM32_ADC3) - -/************************************************************************************ - * Private Functions - ************************************************************************************/ - -/************************************************************************************ - * Public Functions - ************************************************************************************/ - -/************************************************************************************ - * Name: stm32_boardinitialize - * - * Description: - * All STM32 architectures must provide the following entry point. This entry point - * is called early in the intitialization -- after all memory has been configured - * and mapped but before any devices have been initialized. - * - ************************************************************************************/ - -void adc_devinit(void) -{ - struct adc_dev_s *adc; - int ret; - - /* Call stm32_adcinitialize() to get an instance of the ADC interface */ -#warning "Missing Logic" - - /* Register the ADC driver at "/dev/adc0" */ - - ret = adc_register("/dev/adc0", adc); - if (ret < 0) - { - adbg("adc_register failed: %d\n", ret); - } -} - -#endif /* CONFIG_STM32_ADC || CONFIG_STM32_ADC2 || CONFIG_STM32_ADC3 */ +/************************************************************************************ + * configs/stm3240g-eval/src/up_adc.c + * arch/arm/src/board/up_adc.c + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include + +#include +#include + +#include "chip.h" +#include "up_arch.h" +#include "stm3240g-internal.h" + +#ifdef CONFIG_ADC + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/* Configuration ************************************************************/ +/* Up to 3 ADC interfaces are supported */ + +#if STM32_NADC < 3 +# undef CONFIG_STM32_ADC3 +#endif + +#if STM32_NADC < 2 +# undef CONFIG_STM32_ADC2 +#endif + +#if STM32_NADC < 1 +# undef CONFIG_STM32_ADC1 +#endif + +#if defined(CONFIG_STM32_ADC1) || defined(CONFIG_STM32_ADC2) || defined(CONFIG_STM32_ADC3) + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: adc_devinit + * + * Description: + * All STM32 architectures must provide the following interface to work with + * examples/adc. + * + ************************************************************************************/ + +void adc_devinit(void) +{ + struct adc_dev_s *adc; + int ret; + + /* Call stm32_adcinitialize() to get an instance of the ADC interface */ +#warning "Missing Logic" + + /* Register the ADC driver at "/dev/adc0" */ + + ret = adc_register("/dev/adc0", adc); + if (ret < 0) + { + adbg("adc_register failed: %d\n", ret); + } +} + +#endif /* CONFIG_STM32_ADC || CONFIG_STM32_ADC2 || CONFIG_STM32_ADC3 */ #endif /* CONFIG_ADC */ \ No newline at end of file diff --git a/nuttx/configs/stm3240g-eval/src/up_pwm.c b/nuttx/configs/stm3240g-eval/src/up_pwm.c new file mode 100644 index 0000000000..503e260733 --- /dev/null +++ b/nuttx/configs/stm3240g-eval/src/up_pwm.c @@ -0,0 +1,128 @@ +/************************************************************************************ + * configs/stm3240g-eval/src/up_pwm.c + * arch/arm/src/board/up_pwm.c + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include + +#include +#include + +#include "chip.h" +#include "up_arch.h" +#include "stm32_pwm.h" +#include "stm3240g-internal.h" + +/************************************************************************************ + * Definitions + ************************************************************************************/ +/* Configuration *******************************************************************/ +/* PWM + * + * The STM3240G-Eval has no real on-board PWM devices, but the board can be configured to output + * a pulse train using TIM4 CH2. This pin is used by FSMC is connect to CN5 just for this + * purpose: + * + * PD13 FSMC_A18 / MC_TIM4_CH2 pin 33 (EnB) + * + * FSMC must be disabled in this case! + */ + +#define HAVE_PWM 1 + +#ifndef CONFIG_PWM +# undef HAVE_PWM +#endif + +#ifndef CONFIG_STM32_TIM4 +# undef HAVE_PWM +#endif + +#ifndef CONFIG_STM32_TIM4_PWM +# undef HAVE_PWM +#endif + +#if CONFIG_STM32_TIM4_CHANNEL != STM3240G_EVAL_PWMCHANNEL +# undef HAVE_PWM +#endif + +#ifdef HAVE_PWM + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: pwm_devinit + * + * Description: + * All STM32 architectures must provide the following interface to work with + * examples/pwm. + * + ************************************************************************************/ + +void pwm_devinit(void) +{ + struct pwm_lowerhalf_s *pwm; + int ret; + + /* Call stm32_pwminitialize() to get an instance of the PWM interface */ + + pwm = stm32_pwminitialize(STM3240G_EVAL_PWMTIMER); + if (!pwm) + { + dbg("Failed to get the STM32 PWM lower half\n"); + return; + } + + /* Register the PWM driver at "/dev/pwm0" */ + + ret = pwm_register("/dev/pwm0", pwm); + if (ret < 0) + { + adbg("pwm_register failed: %d\n", ret); + } +} + +#endif /* HAVE_PWM */ diff --git a/nuttx/include/nuttx/pwm.h b/nuttx/include/nuttx/pwm.h index eca721d85c..a54b7f6106 100644 --- a/nuttx/include/nuttx/pwm.h +++ b/nuttx/include/nuttx/pwm.h @@ -36,17 +36,17 @@ #ifndef __INCLUDE_NUTTX_PWM_H #define __INCLUDE_NUTTX_PWM_H -/* For the purposes of this driver, a PWM device is any devices and generates - * periodic outputs of controlled frequency and pulse width. Such is device - * might be use, for example, to perform pulse-width modulated output or +/* For the purposes of this driver, a PWM device is any device that generates + * periodic output pulses s of controlled frequency and pulse width. Such a + * device might be used, for example, to perform pulse-width modulated output or * frequency/pulse-count modulated output (such as might be needed to control - * a stepper motor. + * a stepper motor). * * The PWM driver is split into two parts: * * 1) An "upper half", generic driver that provides the comman PWM interface * to application level code, and - * 2) An "lower half" platform-specific driver that implements the low-level + * 2) A "lower half", platform-specific driver that implements the low-level * timer controls to implement the PWM functionality. */