dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity

px4/fmu-v4pro: use hw description methods for timer configuration

This commit is contained in:
Beat Küng 2020-01-29 14:23:14 +01:00 committed by David Sidrane
parent d53153bb9b
commit a0bfb7ad8e
5 changed files with 57 additions and 184 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
boards/px4/fmu-v4pro/src/CMakeLists.txt
View File

@ -36,7 +36,7 @@ add_library(drivers_board
init.c
led.c
spi.c
timer_config.c
timer_config.cpp
usb.c
)
target_link_libraries(drivers_board

42
boards/px4/fmu-v4pro/src/board_config.h
View File

@ -213,24 +213,6 @@
#define BOARD_VALID_UV (4.01f)
/* User GPIOs
*
* GPIO0-5 are the PWM servo outputs.
*/
#define GPIO_GPIO0_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN14)
#define GPIO_GPIO1_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN13)
#define GPIO_GPIO2_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN11)
#define GPIO_GPIO3_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN9)
#define GPIO_GPIO4_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTD|GPIO_PIN13)
#define GPIO_GPIO5_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTD|GPIO_PIN14)
#define GPIO_GPIO0_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN14)
#define GPIO_GPIO1_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN13)
#define GPIO_GPIO2_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN11)
#define GPIO_GPIO3_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN9)
#define GPIO_GPIO4_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN13)
#define GPIO_GPIO5_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14)
/* Power supply control and monitoring GPIOs */
#define GPIO_nVDD_BRICK1_VALID (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN5)
#define GPIO_nVDD_BRICK2_VALID (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN5)
@ -250,32 +232,8 @@
#define GPIO_TONE_ALARM (GPIO_ALT|GPIO_AF1|GPIO_SPEED_2MHz|GPIO_PUSHPULL|GPIO_PORTA|GPIO_PIN15)
/* PWM
*
* Six PWM outputs are configured.
*
* Pins:
*
* CH1 : PE14 : TIM1_CH4
* CH2 : PE13 : TIM1_CH3
* CH3 : PE11 : TIM1_CH2
* CH4 : PE9 : TIM1_CH1
* CH5 : PD13 : TIM4_CH2
* CH6 : PD14 : TIM4_CH3
*/
#define GPIO_TIM1_CH1OUT (GPIO_ALT|GPIO_AF1|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PUSHPULL|GPIO_PORTE|GPIO_PIN9)
#define GPIO_TIM1_CH2OUT (GPIO_ALT|GPIO_AF1|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PUSHPULL|GPIO_PORTE|GPIO_PIN11)
#define GPIO_TIM1_CH3OUT (GPIO_ALT|GPIO_AF1|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PUSHPULL|GPIO_PORTE|GPIO_PIN13)
#define GPIO_TIM1_CH4OUT (GPIO_ALT|GPIO_AF1|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PUSHPULL|GPIO_PORTE|GPIO_PIN14)
#define GPIO_TIM4_CH2OUT (GPIO_ALT|GPIO_AF2|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PUSHPULL|GPIO_PORTD|GPIO_PIN13)
#define GPIO_TIM4_CH3OUT (GPIO_ALT|GPIO_AF2|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PUSHPULL|GPIO_PORTD|GPIO_PIN14)
#define DIRECT_PWM_OUTPUT_CHANNELS 6
#define GPIO_TIM1_CH1IN GPIO_TIM1_CH1IN_2
#define GPIO_TIM1_CH2IN GPIO_TIM1_CH2IN_2
#define GPIO_TIM1_CH3IN GPIO_TIM1_CH3IN_2
#define GPIO_TIM1_CH4IN GPIO_TIM1_CH4IN_2
#define GPIO_TIM4_CH2IN GPIO_TIM4_CH2IN_2
#define GPIO_TIM4_CH3IN GPIO_TIM4_CH3IN_2
#define DIRECT_INPUT_TIMER_CHANNELS 6
/* USB OTG FS

12
boards/px4/fmu-v4pro/src/init.c
View File

@ -73,6 +73,7 @@
#include <systemlib/px4_macros.h>
#include <px4_arch/io_timer.h>
#include <px4_platform_common/init.h>
#include <px4_platform/board_dma_alloc.h>
@ -145,15 +146,10 @@ __EXPORT void board_peripheral_reset(int ms)
************************************************************************************/
__EXPORT void board_on_reset(int status)
{
UNUSED(status);
/* configure the GPIO pins to outputs and keep them low */
stm32_configgpio(GPIO_GPIO0_OUTPUT);
stm32_configgpio(GPIO_GPIO1_OUTPUT);
stm32_configgpio(GPIO_GPIO2_OUTPUT);
stm32_configgpio(GPIO_GPIO3_OUTPUT);
stm32_configgpio(GPIO_GPIO4_OUTPUT);
stm32_configgpio(GPIO_GPIO5_OUTPUT);
for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
px4_arch_configgpio(io_timer_channel_get_gpio_output(i));
}
/* On resets invoked from system (not boot) insure we establish a low
* output state (discharge the pins) on PWM pins before they become inputs.

133
boards/px4/fmu-v4pro/src/timer_config.c
View File

@ -1,133 +0,0 @@
/****************************************************************************
*
* Copyright (C) 2012 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/*
* @file px4fmu_timer_config.c
*
* Configuration data for the stm32 pwm_servo, input capture and pwm input driver.
*
* Note that these arrays must always be fully-sized.
*/
#include <stdint.h>
#include <stm32.h>
#include <stm32_gpio.h>
#include <stm32_tim.h>
#include <drivers/drv_pwm_output.h>
#include <px4_arch/io_timer.h>
#include "board_config.h"
__EXPORT const io_timers_t io_timers[MAX_IO_TIMERS] = {
{
.base = STM32_TIM1_BASE,
.clock_register = STM32_RCC_APB2ENR,
.clock_bit = RCC_APB2ENR_TIM1EN,
.clock_freq = STM32_APB2_TIM1_CLKIN,
.vectorno = STM32_IRQ_TIM1CC,
},
{
.base = STM32_TIM4_BASE,
.clock_register = STM32_RCC_APB1ENR,
.clock_bit = RCC_APB1ENR_TIM4EN,
.clock_freq = STM32_APB1_TIM4_CLKIN,
.vectorno = STM32_IRQ_TIM4,
}
};
__EXPORT const io_timers_channel_mapping_t io_timers_channel_mapping = {
.element = {
{
.first_channel_index = 0,
.channel_count = 4,
},
{
.first_channel_index = 4,
.channel_count = 2,
}
}
};
__EXPORT const timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
{
.gpio_out = GPIO_TIM1_CH4OUT,
.gpio_in = GPIO_TIM1_CH4IN,
.timer_index = 0,
.timer_channel = 4,
.ccr_offset = STM32_GTIM_CCR4_OFFSET,
.masks = GTIM_SR_CC4IF | GTIM_SR_CC4OF
},
{
.gpio_out = GPIO_TIM1_CH3OUT,
.gpio_in = GPIO_TIM1_CH3IN,
.timer_index = 0,
.timer_channel = 3,
.ccr_offset = STM32_GTIM_CCR3_OFFSET,
.masks = GTIM_SR_CC3IF | GTIM_SR_CC3OF
},
{
.gpio_out = GPIO_TIM1_CH2OUT,
.gpio_in = GPIO_TIM1_CH2IN,
.timer_index = 0,
.timer_channel = 2,
.ccr_offset = STM32_GTIM_CCR2_OFFSET,
.masks = GTIM_SR_CC2IF | GTIM_SR_CC2OF
},
{
.gpio_out = GPIO_TIM1_CH1OUT,
.gpio_in = GPIO_TIM1_CH1IN,
.timer_index = 0,
.timer_channel = 1,
.ccr_offset = STM32_GTIM_CCR1_OFFSET,
.masks = GTIM_SR_CC1IF | GTIM_SR_CC1OF
},
{
.gpio_out = GPIO_TIM4_CH2OUT,
.gpio_in = GPIO_TIM4_CH2IN,
.timer_index = 1,
.timer_channel = 2,
.ccr_offset = STM32_GTIM_CCR2_OFFSET,
.masks = GTIM_SR_CC2IF | GTIM_SR_CC2OF
},
{
.gpio_out = GPIO_TIM4_CH3OUT,
.gpio_in = GPIO_TIM4_CH3IN,
.timer_index = 1,
.timer_channel = 3,
.ccr_offset = STM32_GTIM_CCR3_OFFSET,
.masks = GTIM_SR_CC3IF | GTIM_SR_CC3OF
}
};

52
boards/px4/fmu-v4pro/src/timer_config.cpp Normal file
View File

@ -0,0 +1,52 @@
/****************************************************************************
*
* Copyright (C) 2012 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include <px4_arch/io_timer_hw_description.h>
constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
initIOTimer(Timer::Timer1),
initIOTimer(Timer::Timer4),
};
constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
initIOTimerChannelOutputClear(io_timers, {Timer::Timer1, Timer::Channel4}, {GPIO::PortE, GPIO::Pin14}),
initIOTimerChannelOutputClear(io_timers, {Timer::Timer1, Timer::Channel3}, {GPIO::PortE, GPIO::Pin13}),
initIOTimerChannelOutputClear(io_timers, {Timer::Timer1, Timer::Channel2}, {GPIO::PortE, GPIO::Pin11}),
initIOTimerChannelOutputClear(io_timers, {Timer::Timer1, Timer::Channel1}, {GPIO::PortE, GPIO::Pin9}),
initIOTimerChannelOutputClear(io_timers, {Timer::Timer4, Timer::Channel2}, {GPIO::PortD, GPIO::Pin13}),
initIOTimerChannelOutputClear(io_timers, {Timer::Timer4, Timer::Channel3}, {GPIO::PortD, GPIO::Pin14}),
};
constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
initIOTimerChannelMapping(io_timers, timer_io_channels);