More Kconfig stuff

git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@4633 7fd9a85b-ad96-42d3-883c-3090e2eb8679

nuttx/arch/arm/Kconfig

@@ -112,6 +112,48 @@ config ARCH
 	default "stm32"		if ARCH_CHIP_STM32
 	default "str71x"	if ARCH_CHIP_STR71X
 
+config ARCH_STACKDUMP
+	bool "Dump stack on assertions"
+	default n
+	---help---
+		Enable to do stack dumps after assertions
+
+config ARCH_LEDS
+	bool "Use board LEDs to show state"
+	default y
+	---help---
+		Use LEDs to show state. Unique to boards that have LEDs
+
+config ARCH_INTERRUPTSTACK
+	bool "Use interrupt stack"
+	default y
+	---help---
+		This architecture supports an interrupt stack. If defined, this symbol
+		is the size of the interrupt stack in bytes.  If not defined, the user
+		task stacks will be used during interrupt handling.
+
+config ARCH_IRQPRIO
+	bool "Interrupt priority"
+	default y		if ARCH_CORTEXM
+	---help---
+		Select if your board supports interrupt prioritization.
+
+config ARCH_LOOPSPERMSEC
+	int "Delay loops per millisecond"
+	default 5000
+	---help---
+		Delay loops nust be calibrated for correct operation.
+
+config ARCH_CALIBRATION
+	bool "Calibrate delay loop"
+	default n
+	---help---
+		Enables some built in instrumentation that causes a 100 second delay
+		during boot-up.  This 100 second delay serves no purpose other than it
+		allows you to calibratre ARCH_LOOPSPERMSEC.  You simply use a stop
+		watch to measure the 100 second delay then adjust ARCH_LOOPSPERMSEC until
+		the delay actually is 100 seconds.
+
 source arch/arm/src/c5471/Kconfig
 source arch/arm/src/calypso/Kconfig
 source arch/arm/src/dm320/Kconfig

nuttx/configs/stm3210e-eval/Kconfig

@@ -2,3 +2,95 @@
 # For a description of the syntax of this configuration file,
 # see misc/tools/kconfig-language.txt.
 #
+
+if ARCH_BOARD_STM3210E_EVAL
+comment "STM3210E-EVAL LCD Hardware Configuration"
+
+config STM3210E_LCD
+	bool "Select support for the STM3210E-EVAL LCD"
+	default y
+	depends on STM32_FSMC
+
+choice
+	prompt "STM3210E-EVAL LCD Orientation"
+	default LCD_LANDSCAPE
+	depends on STM3210E_LCD
+
+config LCD_LANDSCAPE
+	bool "320x240 landscape display"
+	---help---
+		Define for 320x240 display "landscape" support. Default is this 320x240
+		"landscape" orientation (this setting is informative only... not used).
+
+config LCD_PORTRAIT
+	bool "240x320 portrait display"
+	---help---
+		Define for 240x320 display "portrait" orientation support.  In this
+		orientation, the STM3210E-EVAL's LCD ribbon cable is at the bottom of
+		the display. Default is 320x240 "landscape" orientation.
+
+config LCD_RPORTRAIT
+	bool "240x320 reverse portrait display"
+	---help---
+		Define for 240x320 display "reverse portrait" orientation support.  In
+		this orientation, the STM3210E-EVAL's LCD ribbon cable is at the top
+		of the display. Default is 320x240 "landscape" orientation.
+
+endchoice
+
+config LCD_BACKLIGHT
+	bool "LCD backlight support"
+	depends on STM3210E_LCD
+	default n
+	---help---
+		Define to support a backlight.
+
+config LCD_PWM
+	bool "LCD backlight PWM control"
+	default n
+	depends on LCD_BACKLIGHT && STM32_TIM1
+	---help---
+		If STM32_TIM1 is also defined, then an adjustable backlight will be
+		provided using timer 1 to generate various pulse widthes.  The
+		granularity of the settings is determined by LCD_MAXPOWER.  If LCD_PWM
+		(or STM32_TIM1) is not defined, then a simple on/off backlight is
+		provided.
+
+config LCD_RDSHIFT
+	int "LCD data shift
+	default 5
+	depends on STM3210E_LCD
+	---help---
+		When reading 16-bit gram data, there appears to be a shift in the returned
+		data.  This value fixes the offset.  Default 5.
+
+config STM32_AM240320_DISABLE
+	bool "Disable AM240320 support"
+	default n
+	depends on STM3210E_LCD
+	---help---
+		The LCD driver dynamically selects the LCD based on the reported LCD
+		ID value.  However, code size can be reduced by suppressing support for
+		individual LCDs using this option
+
+config STM32_SPFD5408B_DISABLE
+	bool "Disable SPFD5408B support"
+	default n
+	depends on STM3210E_LCD
+	---help---
+		The LCD driver dynamically selects the LCD based on the reported LCD
+		ID value.  However, code size can be reduced by suppressing support for
+		individual LCDs using this option
+
+config STM32_R61580_DISABLE
+	bool "Disable R61580 support"
+	default n
+	depends on STM3210E_LCD
+	---help---
+		The LCD driver dynamically selects the LCD based on the reported LCD
+		ID value.  However, code size can be reduced by suppressing support for
+		individual LCDs using this option
+
+endif
+
+