dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity

ARK Flow Basic Functionality

This commit is contained in:
alexklimaj 2021-01-27 19:17:40 -07:00 committed by Daniel Agar
parent 19576c5db3
commit 741c1da634
24 changed files with 1760 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
.ci/Jenkinsfile-compile
View File

@ -37,6 +37,7 @@ pipeline {
def nuttx_builds_archive = [
target: [
"airmind_mindpx-v2_default",
"ark_can-flow_default",
"av_x-v1_default",
"bitcraze_crazyflie_default",
"bitcraze_crazyflie21_default",

2
.github/workflows/compile_nuttx.yml vendored
View File

@ -16,6 +16,8 @@ jobs:
matrix:
config: [
airmind_mindpx-v2_default,
ark_can-flow_canbootloader,
ark_can-flow_default,
av_x-v1_default,
bitcraze_crazyflie_default,
bitcraze_crazyflie21_default,

1
.github/workflows/compile_nuttx_cannode.yml vendored
View File

@ -15,6 +15,7 @@ jobs:
strategy:
matrix:
config: [
ark_can-flow_default,
cuav_can-gps-v1_default,
#nxp_ucans32k146_default,
px4_fmu-v4_cannode

10
.vscode/cmake-variants.yaml vendored
View File

@ -56,6 +56,16 @@ CONFIG:
buildType: MinSizeRel
settings:
CONFIG: airmind_mindpx-v2_default
ark_can-flow_default:
short: ark_can-flow_default
buildType: MinSizeRel
settings:
CONFIG: ark_can-flow_default
ark_can-flow_canbootloader:
short: ark_can-flow_canbootloader
buildType: MinSizeRel
settings:
CONFIG: ark_can-flow_canbootloader
av_x-v1_default:
short: av_x-v1
buildType: MinSizeRel

29
boards/ark/can-flow/canbootloader.cmake Normal file
View File

@ -0,0 +1,29 @@
# UAVCAN boot loadable Module ID
set(uavcanblid_sw_version_major 0)
set(uavcanblid_sw_version_minor 1)
add_definitions(
-DAPP_VERSION_MAJOR=${uavcanblid_sw_version_major}
-DAPP_VERSION_MINOR=${uavcanblid_sw_version_minor}
)
set(uavcanblid_hw_version_major 1)
set(uavcanblid_hw_version_minor 0)
set(uavcanblid_name "\"org.ark.can-flow\"")
add_definitions(
-DHW_UAVCAN_NAME=${uavcanblid_name}
-DHW_VERSION_MAJOR=${uavcanblid_hw_version_major}
-DHW_VERSION_MINOR=${uavcanblid_hw_version_minor}
)
px4_add_board(
PLATFORM nuttx
VENDOR ark
MODEL can-flow
LABEL canbootloader
TOOLCHAIN arm-none-eabi
ARCHITECTURE cortex-m4
DRIVERS
bootloaders
)

47
boards/ark/can-flow/default.cmake Normal file
View File

@ -0,0 +1,47 @@
# UAVCAN boot loadable Module ID
set(uavcanblid_sw_version_major 0)
set(uavcanblid_sw_version_minor 1)
add_definitions(
-DAPP_VERSION_MAJOR=${uavcanblid_sw_version_major}
-DAPP_VERSION_MINOR=${uavcanblid_sw_version_minor}
)
set(uavcanblid_hw_version_major 1)
set(uavcanblid_hw_version_minor 0)
set(uavcanblid_name "\"org.ark.can-flow\"")
add_definitions(
-DHW_UAVCAN_NAME=${uavcanblid_name}
-DHW_VERSION_MAJOR=${uavcanblid_hw_version_major}
-DHW_VERSION_MINOR=${uavcanblid_hw_version_minor}
)
px4_add_board(
PLATFORM nuttx
VENDOR ark
MODEL can-flow
LABEL default
TOOLCHAIN arm-none-eabi
ARCHITECTURE cortex-m4
ROMFSROOT cannode
UAVCAN_INTERFACES 1
DRIVERS
bootloaders
imu/bosch/bmi088
optical_flow/paw3902
uavcannode
MODULES
#ekf2
load_mon
#sensors
SYSTEMCMDS
param
perf
reboot
top
topic_listener
ver
work_queue
)

13
boards/ark/can-flow/firmware.prototype Normal file
View File

@ -0,0 +1,13 @@
{
"board_id": 11,
"magic": "PX4FWv1",
"description": "Firmware for the ARK flow board",
"image": "",
"build_time": 0,
"summary": "ARFFLOW",
"version": "0.1",
"image_size": 0,
"image_maxsize": 2080768,
"git_identity": "",
"board_revision": 0
}

9
boards/ark/can-flow/init/rc.board_defaults Normal file
View File

@ -0,0 +1,9 @@
#!/bin/sh
#
# board specific defaults
#------------------------------------------------------------------------------
if [ $AUTOCNF = yes ]
then
fi

9
boards/ark/can-flow/init/rc.board_sensors Normal file
View File

@ -0,0 +1,9 @@
#!/bin/sh
#
# board sensors init
#------------------------------------------------------------------------------
# Internal SPI
paw3902 -s start
bmi088 -A -s -R 0 start
bmi088 -G -s -R 0 start

68
boards/ark/can-flow/nuttx-config/canbootloader/defconfig Normal file
View File

@ -0,0 +1,68 @@
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../nuttx-config"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
CONFIG_ARCH_CHIP="stm32"
CONFIG_ARCH_CHIP_STM32=y
CONFIG_ARCH_CHIP_STM32F412CE=y
CONFIG_ARCH_INTERRUPTSTACK=4096
CONFIG_ARMV7M_MEMCPY=y
CONFIG_ARMV7M_USEBASEPRI=y
CONFIG_BINFMT_DISABLE=y
CONFIG_BOARD_LOOPSPERMSEC=16717
CONFIG_C99_BOOL8=y
CONFIG_CLOCK_MONOTONIC=y
CONFIG_DEBUG_FULLOPT=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_DEFAULT_SMALL=y
CONFIG_DISABLE_MOUNTPOINT=y
CONFIG_DISABLE_MQUEUE=y
CONFIG_DISABLE_PTHREAD=y
CONFIG_EXPERIMENTAL=y
CONFIG_FDCLONE_DISABLE=y
CONFIG_FDCLONE_STDIO=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_IDLETHREAD_STACKSIZE=4096
CONFIG_LIBC_FLOATINGPOINT=y
CONFIG_LIBC_LONG_LONG=y
CONFIG_LIBC_STRERROR=y
CONFIG_LIB_BOARDCTL=y
CONFIG_MAX_TASKS=0
CONFIG_MM_REGIONS=2
CONFIG_NAME_MAX=0
CONFIG_NUNGET_CHARS=0
CONFIG_NXFONTS_DISABLE_16BPP=y
CONFIG_NXFONTS_DISABLE_1BPP=y
CONFIG_NXFONTS_DISABLE_24BPP=y
CONFIG_NXFONTS_DISABLE_2BPP=y
CONFIG_NXFONTS_DISABLE_32BPP=y
CONFIG_NXFONTS_DISABLE_4BPP=y
CONFIG_NXFONTS_DISABLE_8BPP=y
CONFIG_PREALLOC_TIMERS=0
CONFIG_PTHREAD_STACK_MIN=512
CONFIG_RAM_SIZE=262144
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONFIG_SDCLONE_DISABLE=y
CONFIG_SIG_DEFAULT=y
CONFIG_SIG_SIGALRM_ACTION=y
CONFIG_SIG_SIGUSR1_ACTION=y
CONFIG_SIG_SIGUSR2_ACTION=y
CONFIG_STACK_COLORATION=y
CONFIG_START_DAY=30
CONFIG_START_MONTH=11
CONFIG_STDIO_DISABLE_BUFFERING=y
CONFIG_STM32_NOEXT_VECTORS=y
CONFIG_STM32_TIM8=y
CONFIG_TASK_NAME_SIZE=0
CONFIG_USEC_PER_TICK=1000
CONFIG_USERMAIN_STACKSIZE=4096

140
boards/ark/can-flow/nuttx-config/include/board.h Normal file
View File

@ -0,0 +1,140 @@
/************************************************************************************
* configs/px4fmu/include/board.h
* include/arch/board/board.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#include "board_dma_map.h"
#ifndef __ARCH_BOARD_BOARD_H
#define __ARCH_BOARD_BOARD_H
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
#include <stm32.h>
/* HSI - 8 MHz RC factory-trimmed
* LSI - 32 KHz RC
* HSE - 8 MHz Crystal
* LSE - not installed
*/
#define STM32_BOARD_USEHSE 1
#define STM32_BOARD_XTAL 8000000
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
#define STM32_HSI_FREQUENCY 16000000ul
#define STM32_LSI_FREQUENCY 32000
/* Main PLL Configuration */
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(8)
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(384)
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_4
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(8)
#define STM32_PLLCFG_PLLR RCC_PLLCFG_PLLR(2)
#define STM32_RCC_PLLI2SCFGR_PLLI2SM RCC_PLLI2SCFGR_PLLI2SM(16)
#define STM32_RCC_PLLI2SCFGR_PLLI2SN RCC_PLLI2SCFGR_PLLI2SN(192)
#define STM32_RCC_PLLI2SCFGR_PLLI2SQ RCC_PLLI2SCFGR_PLLI2SQ(2)
#define STM32_RCC_PLLI2SCFGR_PLLI2SR RCC_PLLI2SCFGR_PLLI2SR(2)
#define STM32_RCC_PLLI2SCFGR_PLLI2SSRC RCC_PLLI2SCFGR_PLLI2SSRC(0) /* HSE or HSI depending on PLLSRC of PLLCFGR*/
#define STM32_RCC_DCKCFGR2_CK48MSEL RCC_DCKCFGR2_CK48MSEL_PLL
#define STM32_RCC_DCKCFGR2_FMPI2C1SEL RCC_DCKCFGR2_FMPI2C1SEL_APB
#define STM32_RCC_DCKCFGR2_SDIOSEL RCC_DCKCFGR2_SDIOSEL_48MHZ
#define STM32_SYSCLK_FREQUENCY 96000000ul
/* AHB clock (HCLK) is SYSCLK (96MHz) */
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* Same as above, to satisfy compiler */
/* APB1 clock (PCLK1) is HCLK/2 (48MHz) */
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd2 /* PCLK1 = HCLK / 2 */
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* Timers driven from APB1 will be twice PCLK1 (see page 112 of reference manual) */
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
/* APB2 clock (PCLK2) is HCLK (96MHz) */
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK /* PCLK2 = HCLK */
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY)
/* Timers driven from APB2 will be PCLK2 since no prescale division */
#define STM32_APB2_TIM1_CLKIN (STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM8_CLKIN (STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM9_CLKIN (STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM10_CLKIN (STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM11_CLKIN (STM32_PCLK2_FREQUENCY)
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx otherwise frequency is 2xAPBx. */
#define BOARD_TIM2_FREQUENCY (2 * STM32_PCLK1_FREQUENCY)
#define BOARD_TIM3_FREQUENCY (2 * STM32_PCLK1_FREQUENCY)
#define BOARD_TIM4_FREQUENCY (2 * STM32_PCLK1_FREQUENCY)
#define BOARD_TIM5_FREQUENCY (2 * STM32_PCLK1_FREQUENCY)
#define BOARD_TIM6_FREQUENCY (2 * STM32_PCLK1_FREQUENCY)
#define BOARD_TIM7_FREQUENCY (2 * STM32_PCLK1_FREQUENCY)
#define BOARD_TIM8_FREQUENCY (2 * STM32_PCLK2_FREQUENCY)
/* Alternate function pin selections ************************************************/
/* UARTs */
#define GPIO_USART2_RX GPIO_USART2_RX_1
#define GPIO_USART2_TX GPIO_USART2_TX_1
/* CAN */
#define GPIO_CAN1_RX GPIO_CAN1_RX_2
#define GPIO_CAN1_TX GPIO_CAN1_TX_2
/* I2C */
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_1
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_1
/* SPI */
#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1
#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1
#define GPIO_SPI1_SCK GPIO_SPI1_SCK_1
#define GPIO_SPI2_MISO GPIO_SPI2_MISO_1
#define GPIO_SPI2_MOSI GPIO_SPI2_MOSI_1
#define GPIO_SPI2_SCK GPIO_SPI2_SCK_1
#endif /* __ARCH_BOARD_BOARD_H */

45
boards/ark/can-flow/nuttx-config/include/board_dma_map.h Normal file
View File

@ -0,0 +1,45 @@
/****************************************************************************
*
* Copyright (c) 2021 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#pragma once
// DMA1 Channel/Stream Selections
//--------------------------------------------//---------------------------//----------------
// DMA2 Channel/Stream Selections
//--------------------------------------------//---------------------------//----------------
#define DMACHAN_SPI1_RX DMAMAP_SPI1_RX_2 // DMA2, Stream 2, Channel 3
#define DMACHAN_SPI2_RX DMAMAP_SPI2_RX // DMA2, Stream 3, Channel 0
#define DMACHAN_SPI2_TX DMAMAP_SPI2_TX // DMA2, Stream 4, Channel 0
#define DMACHAN_SPI1_TX DMAMAP_SPI1_TX_1 // DMA2, Stream 5, Channel 3

161
boards/ark/can-flow/nuttx-config/nsh/defconfig Normal file
View File

@ -0,0 +1,161 @@
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_DISABLE_OS_API is not set
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
# CONFIG_NSH_DISABLEBG is not set
# CONFIG_NSH_DISABLESCRIPT is not set
# CONFIG_NSH_DISABLE_DF is not set
# CONFIG_NSH_DISABLE_EXEC is not set
# CONFIG_NSH_DISABLE_EXIT is not set
# CONFIG_NSH_DISABLE_GET is not set
# CONFIG_NSH_DISABLE_ITEF is not set
# CONFIG_NSH_DISABLE_LOOPS is not set
# CONFIG_NSH_DISABLE_SEMICOLON is not set
# CONFIG_NSH_DISABLE_TIME is not set
# CONFIG_STM32_DMACAPABLE is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../nuttx-config"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
CONFIG_ARCH_CHIP="stm32"
CONFIG_ARCH_CHIP_STM32=y
CONFIG_ARCH_CHIP_STM32F412CE=y
CONFIG_ARCH_INTERRUPTSTACK=512
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_MEMCPY=y
CONFIG_ARMV7M_USEBASEPRI=y
CONFIG_BOARDCTL_RESET=y
CONFIG_BOARD_LOOPSPERMSEC=16717
CONFIG_BOARD_RESET_ON_ASSERT=2
CONFIG_BUILTIN=y
CONFIG_C99_BOOL8=y
CONFIG_CLOCK_MONOTONIC=y
CONFIG_DEBUG_FULLOPT=y
CONFIG_DEBUG_HARDFAULT_ALERT=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_DEFAULT_SMALL=y
CONFIG_DEV_FIFO_SIZE=0
CONFIG_DEV_PIPE_MAXSIZE=1024
CONFIG_DEV_PIPE_SIZE=70
CONFIG_FDCLONE_STDIO=y
CONFIG_FS_BINFS=y
CONFIG_FS_CROMFS=y
CONFIG_FS_FAT=y
CONFIG_FS_FATTIME=y
CONFIG_FS_PROCFS=y
CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
CONFIG_FS_PROCFS_REGISTER=y
CONFIG_FS_ROMFS=y
CONFIG_GRAN=y
CONFIG_GRAN_INTR=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_I2C=y
CONFIG_I2C_RESET=y
CONFIG_IDLETHREAD_STACKSIZE=750
CONFIG_LIBC_FLOATINGPOINT=y
CONFIG_LIBC_LONG_LONG=y
CONFIG_LIBC_STRERROR=y
CONFIG_MEMSET_64BIT=y
CONFIG_MEMSET_OPTSPEED=y
CONFIG_MM_REGIONS=2
CONFIG_MTD=y
CONFIG_MTD_BYTE_WRITE=y
CONFIG_MTD_PARTITION=y
CONFIG_MTD_RAMTRON=y
CONFIG_NAME_MAX=40
CONFIG_NFILE_DESCRIPTORS=12
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_ARCHROMFS=y
CONFIG_NSH_ARGCAT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_CMDPARMS=y
CONFIG_NSH_CROMFSETC=y
CONFIG_NSH_DISABLE_IFCONFIG=y
CONFIG_NSH_DISABLE_IFUPDOWN=y
CONFIG_NSH_DISABLE_MB=y
CONFIG_NSH_DISABLE_MH=y
CONFIG_NSH_DISABLE_TELNETD=y
CONFIG_NSH_LINELEN=128
CONFIG_NSH_MAXARGUMENTS=15
CONFIG_NSH_NESTDEPTH=8
CONFIG_NSH_QUOTE=y
CONFIG_NSH_ROMFSETC=y
CONFIG_NSH_ROMFSSECTSIZE=128
CONFIG_NSH_STRERROR=y
CONFIG_NSH_VARS=y
CONFIG_PIPES=y
CONFIG_PREALLOC_TIMERS=50
CONFIG_PRIORITY_INHERITANCE=y
CONFIG_PTHREAD_MUTEX_ROBUST=y
CONFIG_PTHREAD_STACK_MIN=512
CONFIG_RAMTRON_SETSPEED=y
CONFIG_RAMTRON_WRITEWAIT=y
CONFIG_RAM_SIZE=262144
CONFIG_RAM_START=0x20000000
CONFIG_RAW_BINARY=y
CONFIG_RTC_DATETIME=y
CONFIG_SCHED_ATEXIT=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_HPWORKPRIORITY=249
CONFIG_SCHED_HPWORKSTACKSIZE=1280
CONFIG_SCHED_INSTRUMENTATION=y
CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
CONFIG_SCHED_LPWORK=y
CONFIG_SCHED_LPWORKPRIORITY=50
CONFIG_SCHED_LPWORKSTACKSIZE=1632
CONFIG_SCHED_WAITPID=y
CONFIG_SEM_NNESTPRIO=8
CONFIG_SEM_PREALLOCHOLDERS=0
CONFIG_SERIAL_TERMIOS=y
CONFIG_SIG_DEFAULT=y
CONFIG_SIG_SIGALRM_ACTION=y
CONFIG_SIG_SIGUSR1_ACTION=y
CONFIG_SIG_SIGUSR2_ACTION=y
CONFIG_SIG_SIGWORK=4
CONFIG_STACK_COLORATION=y
CONFIG_START_DAY=30
CONFIG_START_MONTH=11
CONFIG_STDIO_BUFFER_SIZE=32
CONFIG_STM32_ADC1=y
CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
CONFIG_STM32_DMA1=y
CONFIG_STM32_DMA2=y
CONFIG_STM32_FLASH_PREFETCH=y
CONFIG_STM32_FLOWCONTROL_BROKEN=y
CONFIG_STM32_I2C1=y
CONFIG_STM32_JTAG_SW_ENABLE=y
CONFIG_STM32_PWR=y
CONFIG_STM32_RTC=y
CONFIG_STM32_RTC_HSECLOCK=y
CONFIG_STM32_RTC_MAGIC=0xfacefeee
CONFIG_STM32_RTC_MAGIC_REG=1
CONFIG_STM32_RTC_MAGIC_TIME_SET=0xfacefeef
CONFIG_STM32_SERIALBRK_BSDCOMPAT=y
CONFIG_STM32_SERIAL_DISABLE_REORDERING=y
CONFIG_STM32_SPI1=y
CONFIG_STM32_SPI1_DMA=y
CONFIG_STM32_SPI1_DMA_BUFFER=1024
CONFIG_STM32_SPI2=y
CONFIG_STM32_SPI2_DMA=y
CONFIG_STM32_SPI2_DMA_BUFFER=1024
CONFIG_STM32_SPI_DMA=y
CONFIG_STM32_TIM8=y
CONFIG_STM32_USART2=y
CONFIG_STM32_USART_BREAKS=y
CONFIG_STM32_WWDG=y
CONFIG_SYSTEM_NSH=y
CONFIG_TASK_NAME_SIZE=24
CONFIG_USART2_BAUD=57600
CONFIG_USART2_RXBUFSIZE=600
CONFIG_USART2_SERIAL_CONSOLE=y
CONFIG_USART2_TXBUFSIZE=1100
CONFIG_USEC_PER_TICK=1000
CONFIG_USERMAIN_STACKSIZE=2624
CONFIG_USER_ENTRYPOINT="nsh_main"

134
boards/ark/can-flow/nuttx-config/scripts/canbootloader_script.ld Normal file
View File

@ -0,0 +1,134 @@
/****************************************************************************
* nuttx-config/scripts/canbootloader_script.ld
*
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F412 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 256Kb of SRAM. SRAM is split up into three blocks:
*
* 1) 112Kb of SRAM beginning at address 0x2000:0000
* 2) 16Kb of SRAM beginning at address 0x2001:c000
* 3) 64Kb of SRAM beginning at address 0x2002:0000
* 4) 64Kb of TCM SRAM beginning at address 0x1000:0000
*
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
* where the code expects to begin execution by jumping to the entry point in
* the 0x0800:0000 address range.
*
* The first 0x10000 of flash is reserved for the bootloader.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 32K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 192K
}
OUTPUT_ARCH(arm)
ENTRY(__start) /* treat __start as the anchor for dead code stripping */
EXTERN(_vectors) /* force the vectors to be included in the output */
/*
* Ensure that abort() is present in the final object. The exception handling
* code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
*/
EXTERN(abort)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
/*
* Init functions (static constructors and the like)
*/
.init_section : {
_sinit = ABSOLUTE(.);
KEEP(*(.init_array .init_array.*))
_einit = ABSOLUTE(.);
} > flash
.ARM.extab : {
*(.ARM.extab*)
} > flash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > flash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
. = ALIGN(4);
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

154
boards/ark/can-flow/nuttx-config/scripts/script.ld Normal file
View File

@ -0,0 +1,154 @@
/****************************************************************************
* scripts/ld.script
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F412 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 256Kb of SRAM. SRAM is split up into three blocks:
*
* 1) 112Kb of SRAM beginning at address 0x2000:0000
* 2) 16Kb of SRAM beginning at address 0x2001:c000
* 3) 64Kb of SRAM beginning at address 0x2002:0000
* 4) 64Kb of TCM SRAM beginning at address 0x1000:0000
*
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
* where the code expects to begin execution by jumping to the entry point in
* the 0x0800:0000 address range.
*
* The first 0x10000 of flash is reserved for the bootloader.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08010000, LENGTH = 448K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 192K
}
OUTPUT_ARCH(arm)
ENTRY(__start) /* treat __start as the anchor for dead code stripping */
EXTERN(_vectors) /* force the vectors to be included in the output */
/*
* Ensure that abort() is present in the final object. The exception handling
* code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
*/
EXTERN(abort)
EXTERN(_bootdelay_signature)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
. = ALIGN(8);
/*
* This section positions the app_descriptor_t used
* by the make_can_boot_descriptor.py tool to set
* the application image's descriptor so that the
* uavcan bootloader has the ability to validate the
* image crc, size etc
*/
KEEP(*(.app_descriptor))
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
/*
* Init functions (static constructors and the like)
*/
.init_section : {
_sinit = ABSOLUTE(.);
KEEP(*(.init_array .init_array.*))
_einit = ABSOLUTE(.);
} > flash
/*
* Construction data for parameters.
*/
__param ALIGN(4): {
__param_start = ABSOLUTE(.);
KEEP(*(__param*))
__param_end = ABSOLUTE(.);
} > flash
.ARM.extab : {
*(.ARM.extab*)
} > flash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > flash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
. = ALIGN(4);
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

65
boards/ark/can-flow/src/CMakeLists.txt Normal file
View File

@ -0,0 +1,65 @@
############################################################################
#
# Copyright (c) 2020 PX4 Development Team. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name PX4 nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
if("${PX4_BOARD_LABEL}" STREQUAL "canbootloader")
add_library(drivers_board
boot_config.h
boot.c
led.c
)
target_link_libraries(drivers_board
PRIVATE
nuttx_arch
nuttx_drivers
canbootloader
)
target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/canbootloader)
else()
add_library(drivers_board
can.c
i2c.cpp
init.c
spi.cpp
)
target_link_libraries(drivers_board
PRIVATE
arch_spi
nuttx_arch
nuttx_drivers
px4_layer
arch_io_pins
)
endif()

75
boards/ark/can-flow/src/board_config.h Normal file
View File

@ -0,0 +1,75 @@
/****************************************************************************
*
* Copyright (c) 2021 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file board_config.h
*
* board internal definitions
*/
#pragma once
#include <px4_platform_common/px4_config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
/* CAN Silent mode control */
#define GPIO_CAN1_SILENT_S0 /* PA9 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN9)
/* CAN termination software control */
#define GPIO_CAN1_TERMINATION /* PB13 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN13)
/* Boot config */
#define GPIO_BOOT_CONFIG /* PC15 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN15|GPIO_EXTI)
/* LEDs are driven with push open drain to support Anode to 5V or 3.3V */
#define GPIO_LED_RED /* PB3 */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN3)
#define GPIO_LED_BLUE /* PA8 */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN8)
#define FLASH_BASED_PARAMS
/* High-resolution timer */
#define HRT_TIMER 3 /* use timer 3 for the HRT */
#define HRT_TIMER_CHANNEL 4 /* use capture/compare channel 4 */
__BEGIN_DECLS
#ifndef __ASSEMBLY__
extern void stm32_spiinitialize(void);
#include <px4_platform_common/board_common.h>
#endif /* __ASSEMBLY__ */
__END_DECLS

199
boards/ark/can-flow/src/boot.c Normal file
View File

@ -0,0 +1,199 @@
/****************************************************************************
*
* Copyright (c) 2021 PX4 Development Team. All rights reserved.
* Author: Ben Dyer <ben_dyer@mac.com>
* Pavel Kirienko <pavel.kirienko@zubax.com>
* David Sidrane <david_s5@nscdg.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <px4_config.h>
#include <stdint.h>
#include "boot_config.h"
#include "board.h"
#include <debug.h>
#include <string.h>
#include <arch/board/board.h>
#include <nuttx/board.h>
/************************************************************************************
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the initialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
__EXPORT void stm32_boardinitialize(void)
{
putreg32(getreg32(STM32_RCC_APB1ENR) | RCC_APB1ENR_CAN1EN, STM32_RCC_APB1ENR);
stm32_configgpio(GPIO_CAN1_RX);
stm32_configgpio(GPIO_CAN1_TX);
stm32_configgpio(GPIO_CAN1_SILENT_S0);
stm32_configgpio(GPIO_CAN1_TERMINATION);
putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
putreg32(getreg32(STM32_RCC_APB1RSTR) & ~RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
#if defined(OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO)
stm32_configgpio(GPIO_GETNODEINFO_JUMPER);
#endif
}
/************************************************************************************
* Name: stm32_boarddeinitialize
*
* Description:
* This function is called by the bootloader code prior to booting
* the application. Is should place the HW into an benign initialized state.
*
************************************************************************************/
void stm32_boarddeinitialize(void)
{
putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
}
/****************************************************************************
* Name: board_get_product_name
*
* Description:
* Called to retrieve the product name. The returned value is a assumed
* to be written to a pascal style string that will be length prefixed
* and not null terminated
*
* Input Parameters:
* product_name - A pointer to a buffer to write the name.
* maxlen - The maximum number of charter that can be written
*
* Returned Value:
* The length of characters written to the buffer.
*
****************************************************************************/
uint8_t board_get_product_name(uint8_t *product_name, size_t maxlen)
{
DEBUGASSERT(maxlen > UAVCAN_STRLEN(HW_UAVCAN_NAME));
memcpy(product_name, HW_UAVCAN_NAME, UAVCAN_STRLEN(HW_UAVCAN_NAME));
return UAVCAN_STRLEN(HW_UAVCAN_NAME);
}
/****************************************************************************
* Name: board_get_hardware_version
*
* Description:
* Called to retrieve the hardware version information. The function
* will first initialize the the callers struct to all zeros.
*
* Input Parameters:
* hw_version - A pointer to a uavcan_hardwareversion_t.
*
* Returned Value:
* Length of the unique_id
*
****************************************************************************/
size_t board_get_hardware_version(uavcan_HardwareVersion_t *hw_version)
{
memset(hw_version, 0, sizeof(uavcan_HardwareVersion_t));
hw_version->major = HW_VERSION_MAJOR;
hw_version->minor = HW_VERSION_MINOR;
return board_get_mfguid(*(mfguid_t *) hw_version->unique_id);
}
/****************************************************************************
* Name: board_indicate
*
* Description:
* Provides User feedback to indicate the state of the bootloader
* on board specific hardware.
*
* Input Parameters:
* indication - A member of the uiindication_t
*
* Returned Value:
* None
*
****************************************************************************/
// #define led(n, code, r , g , b, h) {.red = (r),.green = (g), .blue = (b),.hz = (h)}
// typedef begin_packed_struct struct led_t {
// uint8_t red;
// uint8_t green;
// uint8_t blue;
// uint8_t hz;
// } end_packed_struct led_t;
// static const led_t i2l[] = {
// led(0, off, 0, 0, 0, 0),
// led(1, reset, 128, 128, 128, 30),
// led(2, autobaud_start, 0, 128, 0, 1),
// led(3, autobaud_end, 0, 128, 0, 2),
// led(4, allocation_start, 0, 0, 64, 2),
// led(5, allocation_end, 0, 128, 64, 3),
// led(6, fw_update_start, 32, 128, 64, 3),
// led(7, fw_update_erase_fail, 32, 128, 32, 3),
// led(8, fw_update_invalid_response, 64, 0, 0, 1),
// led(9, fw_update_timeout, 64, 0, 0, 2),
// led(a, fw_update_invalid_crc, 64, 0, 0, 4),
// led(b, jump_to_app, 0, 128, 0, 10),
// };
void board_indicate(uiindication_t indication)
{
// switch(indication) {
// case off:
// led_off(GPIO_nLED_RED);
// led_off(GPIO_nLED_BLUE);
// break;
// case reset:
// led_on(GPIO_nLED_RED);
// led_on(GPIO_nLED_BLUE);
// break;
// case jump_to_app:
// led_on(GPIO_nLED_RED);
// led_off(GPIO_nLED_BLUE);
// break;
// default:
// break;
// }
}

135
boards/ark/can-flow/src/boot_config.h Normal file
View File

@ -0,0 +1,135 @@
/****************************************************************************
*
* Copyright (c) 2021 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/*
* @file boot_config.h
*
* bootloader definitions that configures the behavior and options
* of the Boot loader
* This file is relies on the parent folder's boot_config.h file and defines
* different usages of the hardware for bootloading
*/
#pragma once
/************************************************************************************
* Included Files
************************************************************************************/
/* Bring in the board_config.h definitions
* todo:make this be pulled in from a targed's build
* files in nuttx*/
#include "board_config.h"
#include "uavcan.h"
#include <nuttx/compiler.h>
#include <stdint.h>
#include <stm32_flash.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define OPT_PREFERRED_NODE_ID ANY_NODE_ID
//todo:wrap OPT_x in in ifdefs for command line definitions
#define OPT_TBOOT_MS 5000
#define OPT_NODE_STATUS_RATE_MS 800
#define OPT_NODE_INFO_RATE_MS 50
#define OPT_BL_NUMBER_TIMERS 7
/*
* This Option set is set to 1 ensure a provider of firmware has an
* opportunity update the node's firmware.
* This Option is the default policy and can be overridden by
* a jumper
* When this Policy is set, the node will ignore tboot and
* wait indefinitely for a GetNodeInfo request before booting.
*
* OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT is used to allow
* the polarity of the jumper to be True Active
*
* wait OPT_WAIT_FOR_GETNODEINFO OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO
* Jumper
* yes 1 0 x
* yes 1 1 Active
* no 1 1 Not Active
* no 0 0 X
* yes 0 1 Active
* no 0 1 Not Active
*
*/
#define OPT_WAIT_FOR_GETNODEINFO 0
#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO 1
#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 0
#define OPT_ENABLE_WD 1
#define OPT_RESTART_TIMEOUT_MS 20000
/* Reserved for the Booloader */
#define OPT_BOOTLOADER_SIZE_IN_K (1024*64)
/* Reserved for the application out of the total
* system flash minus the BOOTLOADER_SIZE_IN_K
*/
#define OPT_APPLICATION_RESERVER_IN_K 0
#define OPT_APPLICATION_IMAGE_OFFSET OPT_BOOTLOADER_SIZE_IN_K
#define OPT_APPLICATION_IMAGE_LENGTH (FLASH_SIZE-(OPT_BOOTLOADER_SIZE_IN_K+OPT_APPLICATION_RESERVER_IN_K))
#define FLASH_BASE STM32_FLASH_BASE
#define FLASH_SIZE STM32_FLASH_SIZE
#define APPLICATION_LOAD_ADDRESS (FLASH_BASE + OPT_APPLICATION_IMAGE_OFFSET)
#define APPLICATION_SIZE (FLASH_SIZE-OPT_APPLICATION_IMAGE_OFFSET)
#define APPLICATION_LAST_8BIT_ADDRRESS ((uint8_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint8_t)))
#define APPLICATION_LAST_32BIT_ADDRRESS ((uint32_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint32_t)))
#define APPLICATION_LAST_64BIT_ADDRRESS ((uint64_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint64_t)))
/* If this board uses big flash that have large sectors */
#if defined(CONFIG_STM32_FLASH_CONFIG_E) || \
defined(CONFIG_STM32_FLASH_CONFIG_F) || \
defined(CONFIG_STM32_FLASH_CONFIG_G) || \
defined(CONFIG_STM32_FLASH_CONFIG_I)
#define OPT_USE_YIELD
#endif
/* Bootloader Option*****************************************************************
*
*/
#define GPIO_GETNODEINFO_JUMPER (GPIO_BOOT_CONFIG & ~GPIO_EXTI)

130
boards/ark/can-flow/src/can.c Normal file
View File

@ -0,0 +1,130 @@
/****************************************************************************
*
* Copyright (C) 2021 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file can.c
*
* Board-specific CAN functions.
*/
/************************************************************************************
* Included Files
************************************************************************************/
#include <px4_platform_common/px4_config.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/can/can.h>
#include <arch/board/board.h>
#include "chip.h"
#include "arm_arch.h"
#include "stm32.h"
#include "stm32_can.h"
#include "board_config.h"
#ifdef CONFIG_CAN
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Configuration ********************************************************************/
#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
# warning "Both CAN1 and CAN2 are enabled. Assuming only CAN1."
# undef CONFIG_STM32_CAN2
#endif
#ifdef CONFIG_STM32_CAN1
# define CAN_PORT 1
#else
# define CAN_PORT 2
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
int can_devinit(void);
/************************************************************************************
* Name: can_devinit
*
* Description:
* All STM32 architectures must provide the following interface to work with
* examples/can.
*
************************************************************************************/
int can_devinit(void)
{
static bool initialized = false;
struct can_dev_s *can;
int ret;
/* Check if we have already initialized */
if (!initialized) {
/* Call stm32_caninitialize() to get an instance of the CAN interface */
can = stm32_caninitialize(CAN_PORT);
if (can == NULL) {
canerr("ERROR: Failed to get CAN interface\n");
return -ENODEV;
}
/* Register the CAN driver at "/dev/can0" */
ret = can_register("/dev/can0", can);
if (ret < 0) {
canerr("ERROR: can_register failed: %d\n", ret);
return ret;
}
/* Now we are initialized */
initialized = true;
}
return OK;
}
#endif

38
boards/ark/can-flow/src/i2c.cpp Normal file
View File

@ -0,0 +1,38 @@
/****************************************************************************
*
* Copyright (C) 2021 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include <px4_arch/i2c_hw_description.h>
constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
initI2CBusExternal(1),
};

144
boards/ark/can-flow/src/init.c Normal file
View File

@ -0,0 +1,144 @@
/****************************************************************************
*
* Copyright (c) 2021 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file init.c
*
* board specific early startup code. This file implements the
* board_app_initialize() function that is called early by nsh during startup.
*
* Code here is run before the rcS script is invoked; it should start required
* subsystems and perform board-specific initialization.
*/
#include <px4_platform_common/px4_config.h>
#include <px4_platform_common/tasks.h>
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/board.h>
#include <stm32.h>
#include "board_config.h"
#include <stm32_uart.h>
#include <arch/board/board.h>
#include <drivers/drv_hrt.h>
#include <drivers/drv_board_led.h>
#include <systemlib/px4_macros.h>
#include <px4_platform_common/init.h>
# if defined(FLASH_BASED_PARAMS)
# include <parameters/flashparams/flashfs.h>
#endif
/************************************************************************************
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the initialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
__EXPORT void stm32_boardinitialize(void)
{
// Configure CAN interface
stm32_configgpio(GPIO_CAN1_RX);
stm32_configgpio(GPIO_CAN1_TX);
stm32_configgpio(GPIO_CAN1_SILENT_S0);
stm32_configgpio(GPIO_CAN1_TERMINATION);
// Configure SPI all interfaces GPIO & enable power.
stm32_spiinitialize();
}
/****************************************************************************
* Name: board_app_initialize
*
* Description:
* Perform application specific initialization. This function is never
* called directly from application code, but only indirectly via the
* (non-standard) boardctl() interface using the command BOARDIOC_INIT.
*
* Input Parameters:
* arg - The boardctl() argument is passed to the board_app_initialize()
* implementation without modification. The argument has no
* meaning to NuttX; the meaning of the argument is a contract
* between the board-specific initalization logic and the the
* matching application logic. The value cold be such things as a
* mode enumeration value, a set of DIP switch switch settings, a
* pointer to configuration data read from a file or serial FLASH,
* or whatever you would like to do with it. Every implementation
* should accept zero/NULL as a default configuration.
*
* Returned Value:
* Zero (OK) is returned on success; a negated errno value is returned on
* any failure to indicate the nature of the failure.
*
****************************************************************************/
__EXPORT int board_app_initialize(uintptr_t arg)
{
px4_platform_init();
#if defined(FLASH_BASED_PARAMS)
static sector_descriptor_t params_sector_map[] = {
{2, 16 * 1024, 0x08008000},
{3, 16 * 1024, 0x0800C000},
{0, 0, 0},
};
/* Initialize the flashfs layer to use heap allocated memory */
int result = parameter_flashfs_init(params_sector_map, NULL, 0);
if (result != OK) {
syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
return -ENODEV;
}
#endif // FLASH_BASED_PARAMS
//px4_platform_configure();
return OK;
}

102
boards/ark/can-flow/src/led.c Normal file
View File

@ -0,0 +1,102 @@
/****************************************************************************
*
* Copyright (c) 2021 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file led.c
*
* board LED backend.
*/
#include <px4_platform_common/px4_config.h>
#include <stdbool.h>
#include "stm32.h"
#include "board_config.h"
#include <arch/board/board.h>
/*
* Ideally we'd be able to get these from up_internal.h,
* but since we want to be able to disable the NuttX use
* of leds for system indication at will and there is no
* separate switch, we need to build independent of the
* CONFIG_ARCH_LEDS configuration switch.
*/
__BEGIN_DECLS
extern void led_init(void);
extern void led_on(int led);
extern void led_off(int led);
extern void led_toggle(int led);
__END_DECLS
static uint32_t g_ledmap[] = {
GPIO_LED_RED,
GPIO_LED_BLUE,
};
__EXPORT void led_init(void)
{
/* Configure LED GPIOs for output */
for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
stm32_configgpio(g_ledmap[l]);
stm32_gpiowrite(g_ledmap[l], true);
}
}
static void phy_set_led(int led, bool state)
{
/* Pull Down to switch on */
stm32_gpiowrite(g_ledmap[led], !state);
}
static bool phy_get_led(int led)
{
return !stm32_gpioread(g_ledmap[led]);
}
__EXPORT void led_on(int led)
{
phy_set_led(led, true);
}
__EXPORT void led_off(int led)
{
phy_set_led(led, false);
}
__EXPORT void led_toggle(int led)
{
phy_set_led(led, !phy_get_led(led));
}

49
boards/ark/can-flow/src/spi.cpp Normal file
View File

@ -0,0 +1,49 @@
/****************************************************************************
*
* Copyright (C) 2021 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include <px4_arch/spi_hw_description.h>
#include <drivers/drv_sensor.h>
#include <nuttx/spi/spi.h>
constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
initSPIBus(SPI::Bus::SPI1, {
initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortA, GPIO::Pin4}, SPI::DRDY{GPIO::PortB, GPIO::Pin0}),
initSPIDevice(DRV_FLOW_DEVTYPE_PAW3902, SPI::CS{GPIO::PortB, GPIO::Pin5}, SPI::DRDY{GPIO::PortB, GPIO::Pin2}),
}),
initSPIBus(SPI::Bus::SPI2, {
initSPIDevice(DRV_DEVTYPE_UNUSED, SPI::CS{GPIO::PortB, GPIO::Pin12}, SPI::DRDY{GPIO::PortB, GPIO::Pin4}),
}),
};
static constexpr bool unused = validateSPIConfig(px4_spi_buses);