Uploader: Move flash size check into appropriate bootloader version region

This commit is contained in:
Lorenz Meier 2018-02-03 11:13:08 +01:00
parent df32297162
commit 6d00de7b25
1 changed files with 13 additions and 7 deletions

View File

@ -493,13 +493,6 @@ class uploader(object):
if self.fw_maxsize < fw.property('image_size'):
raise RuntimeError("Firmware image is too large for this board")
# Prevent uploads where the maximum image size of the board config is smaller than the flash
# of the board. This is a hint the user chose the wrong config and will lack features
# for this particular board.
if self.fw_maxsize > fw.property('image_maxsize'):
raise RuntimeError("Board can accept larger flash images (%u bytes) than board config (%u bytes). Please use the correct board configuration to avoid lacking critical functionality."
% (self.fw_maxsize, fw.property('image_maxsize')))
# OTP added in v4:
if self.bl_rev > 3:
for byte in range(0, 32*6, 4):
@ -533,6 +526,19 @@ class uploader(object):
print("family: %s" % des[0])
print("revision: %s" % des[1])
print("flash %d" % self.fw_maxsize)
# Prevent uploads where the maximum image size of the board config is smaller than the flash
# of the board. This is a hint the user chose the wrong config and will lack features
# for this particular board.
# This check should also check if the revision is an unaffected revision
# and thus can support the full flash, see
# https://github.com/PX4/Firmware/blob/master/src/drivers/boards/common/stm32/board_mcu_version.c#L125-L144
if self.fw_maxsize > fw.property('image_maxsize'):
raise RuntimeError("Board can accept larger flash images (%u bytes) than board config (%u bytes). Please use the correct board configuration to avoid lacking critical functionality."
% (self.fw_maxsize, fw.property('image_maxsize')))
except Exception:
# ignore bad character encodings
pass