forked from Archive/PX4-Autopilot
Extend lpc1766-stk LED support
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@4242 7fd9a85b-ad96-42d3-883c-3090e2eb8679
This commit is contained in:
patacongo
parent
2901574aff
commit
61b8ff0845
|
|
@ -1,8 +1,8 @@
|
|||
/****************************************************************************
|
||||
* arch/arm/src/lpc17xx/lpc17_allocateheap.c
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
|
|
@ -43,6 +43,7 @@
|
|||
#include <debug.h>
|
||||
|
||||
#include <nuttx/arch.h>
|
||||
#include <nuttx/mm.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "chip.h"
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
/****************************************************************************
|
||||
* arch/arm/src/lpc17xx/lpc17_ssp.c
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
|
|
@ -139,7 +139,6 @@ static inline void ssp_putreg(FAR struct lpc17_sspdev_s *priv, uint8_t offset,
|
|||
#ifndef CONFIG_SPI_OWNBUS
|
||||
static int ssp_lock(FAR struct spi_dev_s *dev, bool lock);
|
||||
#endif
|
||||
static void ssp_select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
|
||||
static uint32_t ssp_setfrequency(FAR struct spi_dev_s *dev, uint32_t frequency);
|
||||
static void ssp_setmode(FAR struct spi_dev_s *dev, enum spi_mode_e mode);
|
||||
static void ssp_setbits(FAR struct spi_dev_s *dev, int nbits);
|
||||
|
|
|
|||
|
|
@ -893,7 +893,7 @@ CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
|
|||
#
|
||||
# Settings for examples/usbterm
|
||||
#
|
||||
# CONFIG_EXAMPLES_UBSTERM_BUILTIN - Build the usbterm example as an NSH
|
||||
# CONFIG_EXAMPLES_USBTERM_BUILTIN - Build the usbterm example as an NSH
|
||||
# built-in command. NOTE: This is not fully functional as of this
|
||||
# writing.. It should work, but there is no mechanism in place yet
|
||||
# to exit the USB terminal program and return to NSH.
|
||||
|
|
@ -910,7 +910,7 @@ CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
|
|||
# CONFIG_EXAMPLES_USBTERM_TRACECONTROLLER - Show controller events
|
||||
# CONFIG_EXAMPLES_USBTERM_TRACEINTERRUPTS - Show interrupt-related events
|
||||
#
|
||||
CONFIG_EXAMPLES_UBSTERM_BUILTIN=n
|
||||
CONFIG_EXAMPLES_USBTERM_BUILTIN=n
|
||||
CONFIG_EXAMPLES_USBTERM_BUFLEN=256
|
||||
CONFIG_EXAMPLES_USBTERM_TRACEINIT=n
|
||||
CONFIG_EXAMPLES_USBTERM_TRACECLASS=n
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@
|
|||
* configs/olimex-lpc1766stk/ftpc/ld.script
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
|
|
@ -80,11 +80,11 @@ SECTIONS
|
|||
*(.ARM.extab*)
|
||||
} >sram
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
} >sram
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
.bss : { /* BSS */
|
||||
_sbss = ABSOLUTE(.);
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@
|
|||
# configs/olimex-lpc1766stk/hidkbd/defconfig
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@
|
|||
* configs/olimex-lpc1766stk/hidkbd/ld.script
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
|
|
@ -80,11 +80,11 @@ SECTIONS
|
|||
*(.ARM.extab*)
|
||||
} >sram
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
} >sram
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
.bss : { /* BSS */
|
||||
_sbss = ABSOLUTE(.);
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
* configs/olimex-lpc1766stk/include/board.h
|
||||
* include/arch/board/board.h
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
|
|
@ -46,9 +46,7 @@
|
|||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Clocking *************************************************************************/
|
||||
|
||||
/* NOTE: The following definitions require lpc17_syscon.h. It is not included here
|
||||
* because the including C file may not have that file in its include path.
|
||||
*/
|
||||
|
|
@ -130,7 +128,28 @@
|
|||
#define ETH_MCFG_CLKSEL_DIV ETH_MCFG_CLKSEL_DIV20
|
||||
|
||||
/* LED definitions ******************************************************************/
|
||||
/* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in
|
||||
* any way. The following definitions are used to access individual LEDs.
|
||||
*
|
||||
* LED1 -- Connected to P1[25]
|
||||
* LED2 -- Connected to P0[4]
|
||||
*/
|
||||
|
||||
/* LED index values for use with lpc17_setled() */
|
||||
|
||||
#define BOARD_LED1 0
|
||||
#define BOARD_LED2 1
|
||||
#define BOARD_NLEDS 2
|
||||
|
||||
/* LED bits for use with lpc17_setleds() */
|
||||
|
||||
#define BOARD_LED1_BIT (1 << BOARD_LED1)
|
||||
#define BOARD_LED2_BIT (1 << BOARD_LED2)
|
||||
|
||||
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 3 LEDs
|
||||
* on board the Olimex LPC1766-STK. The following definitions
|
||||
* describe how NuttX controls the LEDs:
|
||||
*/
|
||||
/* LED1 LED2 */
|
||||
#define LED_STARTED 0 /* OFF OFF = Still initializing */
|
||||
#define LED_HEAPALLOCATE 0 /* OFF OFF = Still initializing */
|
||||
|
|
@ -142,6 +161,45 @@
|
|||
#define LED_PANIC 2 /* N/C ON = Oops! We crashed. (flashing) */
|
||||
#define LED_IDLE 3 /* OFF N/C = LPC17 in sleep mode (LED1 glowing) */
|
||||
|
||||
/* Button definitions ***************************************************************/
|
||||
/* The LPC1766-STK supports several buttons. All will read "1" when open and "0"
|
||||
* when closed
|
||||
*
|
||||
* BUT1 -- Connected to P0[23]
|
||||
* BUT2 -- Connected to P2[13]
|
||||
* WAKE-UP -- Connected to P2[12]
|
||||
*
|
||||
* And a Joystick
|
||||
*
|
||||
* CENTER -- Connected to P0[4]
|
||||
* DOWN -- Connected to P2[1]
|
||||
* LEFT -- Connected to P2[7]
|
||||
* RIGHT -- Connected to P2[8]
|
||||
* UP -- Connected to P2[0]
|
||||
*/
|
||||
|
||||
#define BOARD_BUTTON_1 0
|
||||
#define BOARD_BUTTON_2 1
|
||||
#define BOARD_BUTTON_WAKEUP 2
|
||||
|
||||
#define BOARD_JOYSTICK_CENTER 3
|
||||
#define BOARD_JOYSTICK_DOWN 4
|
||||
#define BOARD_JOYSTICK_LEFT 5
|
||||
#define BOARD_JOYSTICK_RIGHT 6
|
||||
#define BOARD_JOYSTICK_UP 7
|
||||
|
||||
#define BOARD_NUM_BUTTONS 8
|
||||
|
||||
#define BOARD_BUTTON_BUTTON1_BIT (1 << BOARD_BUTTON_1)
|
||||
#define BOARD_BUTTON_BUTTON2_BIT (1 << BOARD_BUTTON_2)
|
||||
#define BOARD_BUTTON_WAKEUP_BIT (1 << BOARD_BUTTON_WAKEUP)
|
||||
|
||||
#define BOARD_JOYSTICK_CENTER_BIT (1 << BOARD_JOYSTICK_CENTER)
|
||||
#define BOARD_JOYSTICK_DOWN_BIT (1 << BOARD_JOYSTICK_DOWN)
|
||||
#define BOARD_JOYSTICK_LEFT_BIT (1 << BOARD_JOYSTICK_LEFT)
|
||||
#define BOARD_JOYSTICK_RIGHT_BIT (1 << BOARD_JOYSTICK_RIGHT)
|
||||
#define BOARD_JOYSTICK_UP_BIT (1 << BOARD_JOYSTICK_UP)
|
||||
|
||||
/* Alternate pin selections *********************************************************/
|
||||
|
||||
/* CAN1 GPIO PIN SIGNAL NAME
|
||||
|
|
@ -318,6 +376,22 @@ extern "C" {
|
|||
|
||||
EXTERN void lpc17_boardinitialize(void);
|
||||
|
||||
/****************************************************************************
|
||||
* Name: lpc17_ledinit and lpc17_setled
|
||||
*
|
||||
* Description:
|
||||
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board
|
||||
* LEDs. If CONFIG_ARCH_LEDS is not defined, then the following interfaces
|
||||
* are available to control the LEDs from user applications.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef CONFIG_ARCH_LEDS
|
||||
EXTERN void lpc17_ledinit(void);
|
||||
EXTERN void lpc17_setled(int led, bool ledon);
|
||||
EXTERN void lpc17_setleds(uint8_t ledset);
|
||||
#endif
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
/****************************************************************************
|
||||
* configs/olimex-lpc1766stk/nettest/ld.script
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
|
|
@ -80,11 +80,11 @@ SECTIONS
|
|||
*(.ARM.extab*)
|
||||
} >sram
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
} >sram
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
.bss : { /* BSS */
|
||||
_sbss = ABSOLUTE(.);
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
############################################################################
|
||||
# configs/olimex-lpc1766stk/nsh/defconfig
|
||||
#
|
||||
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
# Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
|
|
@ -304,9 +304,6 @@ CONFIG_HAVE_LIBM=n
|
|||
# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
|
||||
# desciptors by task_create() when a new task is started. If
|
||||
# set, all sockets will appear to be closed in the new task.
|
||||
# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
|
||||
# This format will support execution of NuttX binaries located
|
||||
# in a ROMFS filesystem (see examples/nxflat).
|
||||
# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to
|
||||
# handle delayed processing from interrupt handlers. This feature
|
||||
# is required for some drivers but, if there are not complaints,
|
||||
|
|
@ -325,20 +322,23 @@ CONFIG_HAVE_LIBM=n
|
|||
# thread. Default: CONFIG_IDLETHREAD_STACKSIZE.
|
||||
# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
|
||||
# the worker thread. Default: 4
|
||||
# CONFIG_SCHED_WAITPID - Enable the waitpid() API
|
||||
# CONFIG_SCHED_ATEXIT - Enabled the atexit() API
|
||||
#
|
||||
#CONFIG_APPS_DIR=
|
||||
CONFIG_DEBUG=n
|
||||
CONFIG_DEBUG_VERBOSE=n
|
||||
CONFIG_DEBUG_SYMBOLS=n
|
||||
CONFIG_DEBUG_NET=n
|
||||
CONFIG_DEBUG_USB=n
|
||||
CONFIG_MM_REGIONS=2
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_RR_INTERVAL=200
|
||||
CONFIG_SCHED_INSTRUMENTATION=n
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
CONFIG_START_YEAR=2010
|
||||
CONFIG_START_MONTH=11
|
||||
CONFIG_START_DAY=10
|
||||
CONFIG_START_YEAR=2011
|
||||
CONFIG_START_MONTH=12
|
||||
CONFIG_START_DAY=30
|
||||
CONFIG_GREGORIAN_TIME=n
|
||||
CONFIG_JULIAN_TIME=n
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
|
|
@ -355,6 +355,8 @@ CONFIG_SCHED_WORKPRIORITY=50
|
|||
CONFIG_SCHED_WORKPERIOD=(50*1000)
|
||||
CONFIG_SCHED_WORKSTACKSIZE=1024
|
||||
CONFIG_SIG_SIGWORK=4
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
CONFIG_SCHED_ATEXIT=n
|
||||
|
||||
#
|
||||
# Settings for NXFLAT
|
||||
|
|
@ -562,7 +564,7 @@ CONFIG_NET_UDP_CHECKSUMS=y
|
|||
CONFIG_NET_ICMP=y
|
||||
CONFIG_NET_ICMP_PING=y
|
||||
#CONFIG_NET_PINGADDRCONF=0
|
||||
CONFIG_NET_STATISTICS=y
|
||||
CONFIG_NET_STATISTICS=n
|
||||
#CONFIG_NET_RECEIVE_WINDOW=
|
||||
#CONFIG_NET_ARPTAB_SIZE=8
|
||||
CONFIG_NET_BROADCAST=n
|
||||
|
|
@ -788,6 +790,9 @@ CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
|||
#
|
||||
# Settings for apps/nshlib
|
||||
#
|
||||
# CONFIG_NSH_BUILTIN_APPS - Support external registered,
|
||||
# "named" applications that can be executed from the NSH
|
||||
# command line (see apps/README.txt for more information).
|
||||
# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer
|
||||
# CONFIG_NSH_STRERROR - Use strerror(errno)
|
||||
# CONFIG_NSH_LINELEN - Maximum length of one command line
|
||||
|
|
@ -819,6 +824,7 @@ CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
|||
# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors
|
||||
# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint
|
||||
#
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_STRERROR=n
|
||||
CONFIG_NSH_LINELEN=64
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@
|
|||
* configs/olimex-lpc1766stk/nsh/ld.script
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
|
|
@ -80,11 +80,11 @@ SECTIONS
|
|||
*(.ARM.extab*)
|
||||
} >sram
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
} >sram
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
.bss : { /* BSS */
|
||||
_sbss = ABSOLUTE(.);
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
/****************************************************************************
|
||||
* configs/olimex-lpc1766stk/nx/ld.script
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
|
|
@ -80,11 +80,11 @@ SECTIONS
|
|||
*(.ARM.extab*)
|
||||
} >sram
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
} >sram
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
.bss : { /* BSS */
|
||||
_sbss = ABSOLUTE(.);
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
/****************************************************************************
|
||||
* configs/olimex-lpc1766stk/ostest/ld.script
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
|
|
@ -80,11 +80,11 @@ SECTIONS
|
|||
*(.ARM.extab*)
|
||||
} >sram
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
} >sram
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
.bss : { /* BSS */
|
||||
_sbss = ABSOLUTE(.);
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@
|
|||
# configs/olimex-lpc1766stk/slip-httpd/defconfig
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@
|
|||
* configs/olimex-lpc1766stk/slip-httpd/ld.script
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
|
|
@ -80,11 +80,11 @@ SECTIONS
|
|||
*(.ARM.extab*)
|
||||
} >sram
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
} >sram
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
.bss : { /* BSS */
|
||||
_sbss = ABSOLUTE(.);
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@
|
|||
# configs/olimex-lpc1766stk/src/Makefile
|
||||
#
|
||||
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
|
|
|
|||
|
|
@ -1,235 +1,235 @@
|
|||
/************************************************************************************
|
||||
* configs/olimex-lpc1766stk/src/lpc1766stk_internal.h
|
||||
* arch/arm/src/board/lpc1766stk_internal.n
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H
|
||||
#define _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <nuttx/compiler.h>
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* LPC1766-STK GPIO Pin Definitions *************************************************/
|
||||
/* Board GPIO Usage:
|
||||
*
|
||||
* GPIO PIN SIGNAL NAME
|
||||
* -------------------------------- ---- --------------
|
||||
* P0[0]/RD1/TXD3/SDA1 46 RD1
|
||||
* P0[1]/TD1/RXD3/SCL1 47 TD1
|
||||
* P0[2]/TXD0/AD0[7] 98 TXD0
|
||||
* P0[3]/RXD0/AD0[6] 99 RXD0
|
||||
* P0[4]/I2SRX_CLK/RD2/CAP2[0] 81 LED2/ACC IRQ
|
||||
* P0[5]/I2SRX_WS/TD2/CAP2[1] 80 CENTER
|
||||
* P0[6]/I2SRX_SDA/SSEL1/MAT2[0] 79 SSEL1
|
||||
* P0[7]/I2STX_CLK/SCK1/MAT2[1] 78 SCK1
|
||||
* P0[8]/I2STX_WS/MISO1/MAT2[2] 77 MISO1
|
||||
* P0[9]/I2STX_SDA/MOSI1/MAT2[3] 76 MOSI1
|
||||
* P0[10]/TXD2/SDA2/MAT3[0] 48 SDA2
|
||||
* P0[11]/RXD2/SCL2/MAT3[1] 49 SCL2
|
||||
* P0[15]/TXD1/SCK0/SCK 62 TXD1
|
||||
* P0[16]/RXD1/SSEL0/SSEL 63 RXD1
|
||||
* P0[17]/CTS1/MISO0/MISO 61 CTS1
|
||||
* P0[18]/DCD1/MOSI0/MOSI 60 DCD1
|
||||
* P0[19]/DSR1/SDA1 59 DSR1
|
||||
* P0[20]/DTR1/SCL1 58 DTR1
|
||||
* P0[21]/RI1/RD1 57 MMC PWR
|
||||
* P0[22]/RTS1/TD1 56 RTS1
|
||||
* P0[23]/AD0[0]/I2SRX_CLK/CAP3[0] 9 BUT1
|
||||
* P0[24]/AD0[1]/I2SRX_WS/CAP3[1] 8 TEMP
|
||||
* P0[25]/AD0[2]/I2SRX_SDA/TXD3 7 MIC IN
|
||||
* P0[26]/AD0[3]/AOUT/RXD3 6 AOUT
|
||||
* P0[27]/SDA0/USB_SDA 25 USB_SDA
|
||||
* P0[28]/SCL0/USB_SCL 24 USB_SCL
|
||||
* P0[29]/USB_D+ 29 USB_D+
|
||||
* P0[30]/USB_D- 30 USB_D-
|
||||
* P1[0]/ENET_TXD0 95 E_TXD0
|
||||
* P1[1]/ENET_TXD1 94 E_TXD1
|
||||
* P1[4]/ENET_TX_EN 93 E_TX_EN
|
||||
* P1[8]/ENET_CRS 92 E_CRS
|
||||
* P1[9]/ENET_RXD0 91 E_RXD0
|
||||
* P1[10]/ENET_RXD1 90 E_RXD1
|
||||
* P1[14]/ENET_RX_ER 89 E_RX_ER
|
||||
* P1[15]/ENET_REF_CLK 88 E_REF_CLK
|
||||
* P1[16]/ENET_MDC 87 E_MDC
|
||||
* P1[17]/ENET_MDIO 86 E_MDIO
|
||||
* P1[18]/USB_UP_LED/PWM1[1]/CAP1[0] 32 USB_UP_LED
|
||||
* P1[19]/MC0A/#USB_PPWR/CAP1[1] 33 #USB_PPWR
|
||||
* P1[20]/MCFB0/PWM1[2]/SCK0 34 SCK0
|
||||
* P1[21]/MCABORT/PWM1[3]/SSEL0 35 SSEL0
|
||||
* P1[22]/MC0B/USB_PWRD/MAT1[0] 36 USBH_PWRD
|
||||
* P1[23]/MCFB1/PWM1[4]/MISO0 37 MISO0
|
||||
* P1[24]/MCFB2/PWM1[5]/MOSI0 38 MOSI0
|
||||
* P1[25]/MC1A/MAT1[1] 39 LED1
|
||||
* P1[26]/MC1B/PWM1[6]/CAP0[0] 40 CS_UEXT
|
||||
* P1[27]/CLKOUT/#USB_OVRCR/CAP0[1] 43 #USB_OVRCR
|
||||
* P1[28]/MC2A/PCAP1[0]/MAT0[0] 44 P1.28
|
||||
* P1[29]/MC2B/PCAP1[1]/MAT0[1] 45 P1.29
|
||||
* P1[30]/VBUS/AD0[4] 21 VBUS
|
||||
* P1[31]/SCK1/AD0[5] 20 AIN5
|
||||
* P2[0]/PWM1[1]/TXD1 75 UP
|
||||
* P2[1]/PWM1[2]/RXD1 74 DOWN
|
||||
* P2[2]/PWM1[3]/CTS1/TRACEDATA[3] 73 TRACE_D3
|
||||
* P2[3]/PWM1[4]/DCD1/TRACEDATA[2] 70 TRACE_D2
|
||||
* P2[4]/PWM1[5]/DSR1/TRACEDATA[1] 69 TRACE_D1
|
||||
* P2[5]/PWM1[6]/DTR1/TRACEDATA[0] 68 TRACE_D0
|
||||
* P2[6]/PCAP1[0]/RI1/TRACECLK 67 TRACE_CLK
|
||||
* P2[7]/RD2/RTS1 66 LEFT
|
||||
* P2[8]/TD2/TXD2 65 RIGHT
|
||||
* P2[9]/USB_CONNECT/RXD2 64 USBD_CONNECT
|
||||
* P2[10]/#EINT0/NMI 53 ISP_E4
|
||||
* P2[11]/#EINT1/I2STX_CLK 52 #EINT1
|
||||
* P2[12]/#EINT2/I2STX_WS 51 WAKE-UP
|
||||
* P2[13]/#EINT3/I2STX_SDA 50 BUT2
|
||||
* P3[25]/MAT0[0]/PWM1[2] 27 LCD_RST
|
||||
* P3[26]/STCLK/MAT0[1]/PWM1[3] 26 LCD_BL
|
||||
*/
|
||||
|
||||
/* LEDs GPIO PIN SIGNAL NAME
|
||||
* -------------------------------- ---- --------------
|
||||
* P1[25]/MC1A/MAT1[1] 39 LED1
|
||||
* P0[4]/I2SRX_CLK/RD2/CAP2[0] 81 LED2/ACC IRQ
|
||||
*/
|
||||
|
||||
#define LPC1766STK_LED1 (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT1 | GPIO_PIN25)
|
||||
#define LPC1766STK_LED2 (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN4)
|
||||
|
||||
/* Buttons GPIO PIN SIGNAL NAME
|
||||
* -------------------------------- ---- --------------
|
||||
* P2[12]/#EINT2/I2STX_WS 51 WAKE-UP
|
||||
* P0[23]/AD0[0]/I2SRX_CLK/CAP3[0] 9 BUT1
|
||||
* P2[13]/#EINT3/I2STX_SDA 50 BUT2
|
||||
*/
|
||||
|
||||
#define LPC1766STK_WAKE_UP (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN12)
|
||||
#define LPC1766STK_BUT1 (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN23)
|
||||
#define LPC1766STK_BUT2 (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN13)
|
||||
|
||||
/* Joystick GPIO PIN SIGNAL NAME
|
||||
* -------------------------------- ---- --------------
|
||||
* P0[5]/I2SRX_WS/TD2/CAP2[1] 80 CENTER
|
||||
* P2[0]/PWM1[1]/TXD1 75 UP
|
||||
* P2[1]/PWM1[2]/RXD1 74 DOWN
|
||||
* P2[7]/RD2/RTS1 66 LEFT
|
||||
* P2[8]/TD2/TXD2 65 RIGHT
|
||||
*/
|
||||
|
||||
#define LPC1766STK_CENTER (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN5)
|
||||
#define LPC1766STK_UP (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN0)
|
||||
#define LPC1766STK_DOWN (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN1)
|
||||
#define LPC1766STK_LEFT (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN7)
|
||||
#define LPC1766STK_RIGHT (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN8)
|
||||
|
||||
/* Nokia LCD GPIO PIN SIGNAL NAME
|
||||
* -------------------------------- ---- --------------
|
||||
* P1[21]/MCABORT/PWM1[3]/SSEL0 35 SSEL0
|
||||
* P1[20]/MCFB0/PWM1[2]/SCK0 34 SCK0
|
||||
* P1[23]/MCFB1/PWM1[4]/MISO0 37 MISO0
|
||||
* P1[24]/MCFB2/PWM1[5]/MOSI0 38 MOSI0
|
||||
* P3[25]/MAT0[0]/PWM1[2] 27 LCD_RST
|
||||
* P3[26]/STCLK/MAT0[1]/PWM1[3] 26 LCD_BL (PWM1)
|
||||
*/
|
||||
|
||||
#define LPC1766STK_LCD_CS (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT1 | GPIO_PIN21)
|
||||
#define LPC1766STK_LCD_RST (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT3 | GPIO_PIN25)
|
||||
#define LPC1766STK_LCD_BL GPIO_PWM1p3_3
|
||||
#define GPIO_PWM1p3 GPIO_PWM1p3_3
|
||||
|
||||
/* SD/MMC GPIO PIN SIGNAL NAME
|
||||
* -------------------------------- ---- --------------
|
||||
* P0[6]/I2SRX_SDA/SSEL1/MAT2[0] 79 SSEL1 (active low)
|
||||
* P0[7]/I2STX_CLK/SCK1/MAT2[1] 78 SCK1
|
||||
* P0[8]/I2STX_WS/MISO1/MAT2[2] 77 MISO1
|
||||
* P0[9]/I2STX_SDA/MOSI1/MAT2[3] 76 MOSI1
|
||||
* P0[21]/RI1/RD1 57 MMC PWR (active low)
|
||||
*/
|
||||
|
||||
#define LPC1766STK_MMC_CS (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN6)
|
||||
#define LPC1766STK_MMC_PWR (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN21)
|
||||
|
||||
/* AD GPIO PIN SIGNAL NAME
|
||||
* -------------------------------- ---- --------------
|
||||
* P0[24]/AD0[1]/I2SRX_WS/CAP3[1] 8 TEMP
|
||||
* P0[25]/AD0[2]/I2SRX_SDA/TXD3 7 MIC IN
|
||||
*/
|
||||
|
||||
#define LPC1766STK_TEMP GPIO_AD0p1
|
||||
#define LPC1766STK_MIC_IN GPIO_AD0p2
|
||||
|
||||
/* UEXT GPIO PIN SIGNAL NAME
|
||||
* -------------------------------- ---- --------------
|
||||
* P1[26]/MC1B/PWM1[6]/CAP0[0] 40 CS_UEXT
|
||||
*/
|
||||
|
||||
#define LPC1766STK_CS_UEXT (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT1 | GPIO_PIN26)
|
||||
|
||||
/* ISP? GPIO PIN SIGNAL NAME
|
||||
* -------------------------------- ---- --------------
|
||||
* P2[10]/#EINT0/NMI 53 ISP_E4
|
||||
*/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Types
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public data
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: lpc17_sspinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the Olimex LPC1766-STK board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
extern void weak_function lpc17_sspinitialize(void);
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H */
|
||||
|
||||
/************************************************************************************
|
||||
* configs/olimex-lpc1766stk/src/lpc1766stk_internal.h
|
||||
* arch/arm/src/board/lpc1766stk_internal.n
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H
|
||||
#define _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <nuttx/compiler.h>
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* LPC1766-STK GPIO Pin Definitions *************************************************/
|
||||
/* Board GPIO Usage:
|
||||
*
|
||||
* GPIO PIN SIGNAL NAME
|
||||
* -------------------------------- ---- --------------
|
||||
* P0[0]/RD1/TXD3/SDA1 46 RD1
|
||||
* P0[1]/TD1/RXD3/SCL1 47 TD1
|
||||
* P0[2]/TXD0/AD0[7] 98 TXD0
|
||||
* P0[3]/RXD0/AD0[6] 99 RXD0
|
||||
* P0[4]/I2SRX_CLK/RD2/CAP2[0] 81 LED2/ACC IRQ
|
||||
* P0[5]/I2SRX_WS/TD2/CAP2[1] 80 CENTER
|
||||
* P0[6]/I2SRX_SDA/SSEL1/MAT2[0] 79 SSEL1
|
||||
* P0[7]/I2STX_CLK/SCK1/MAT2[1] 78 SCK1
|
||||
* P0[8]/I2STX_WS/MISO1/MAT2[2] 77 MISO1
|
||||
* P0[9]/I2STX_SDA/MOSI1/MAT2[3] 76 MOSI1
|
||||
* P0[10]/TXD2/SDA2/MAT3[0] 48 SDA2
|
||||
* P0[11]/RXD2/SCL2/MAT3[1] 49 SCL2
|
||||
* P0[15]/TXD1/SCK0/SCK 62 TXD1
|
||||
* P0[16]/RXD1/SSEL0/SSEL 63 RXD1
|
||||
* P0[17]/CTS1/MISO0/MISO 61 CTS1
|
||||
* P0[18]/DCD1/MOSI0/MOSI 60 DCD1
|
||||
* P0[19]/DSR1/SDA1 59 DSR1
|
||||
* P0[20]/DTR1/SCL1 58 DTR1
|
||||
* P0[21]/RI1/RD1 57 MMC PWR
|
||||
* P0[22]/RTS1/TD1 56 RTS1
|
||||
* P0[23]/AD0[0]/I2SRX_CLK/CAP3[0] 9 BUT1
|
||||
* P0[24]/AD0[1]/I2SRX_WS/CAP3[1] 8 TEMP
|
||||
* P0[25]/AD0[2]/I2SRX_SDA/TXD3 7 MIC IN
|
||||
* P0[26]/AD0[3]/AOUT/RXD3 6 AOUT
|
||||
* P0[27]/SDA0/USB_SDA 25 USB_SDA
|
||||
* P0[28]/SCL0/USB_SCL 24 USB_SCL
|
||||
* P0[29]/USB_D+ 29 USB_D+
|
||||
* P0[30]/USB_D- 30 USB_D-
|
||||
* P1[0]/ENET_TXD0 95 E_TXD0
|
||||
* P1[1]/ENET_TXD1 94 E_TXD1
|
||||
* P1[4]/ENET_TX_EN 93 E_TX_EN
|
||||
* P1[8]/ENET_CRS 92 E_CRS
|
||||
* P1[9]/ENET_RXD0 91 E_RXD0
|
||||
* P1[10]/ENET_RXD1 90 E_RXD1
|
||||
* P1[14]/ENET_RX_ER 89 E_RX_ER
|
||||
* P1[15]/ENET_REF_CLK 88 E_REF_CLK
|
||||
* P1[16]/ENET_MDC 87 E_MDC
|
||||
* P1[17]/ENET_MDIO 86 E_MDIO
|
||||
* P1[18]/USB_UP_LED/PWM1[1]/CAP1[0] 32 USB_UP_LED
|
||||
* P1[19]/MC0A/#USB_PPWR/CAP1[1] 33 #USB_PPWR
|
||||
* P1[20]/MCFB0/PWM1[2]/SCK0 34 SCK0
|
||||
* P1[21]/MCABORT/PWM1[3]/SSEL0 35 SSEL0
|
||||
* P1[22]/MC0B/USB_PWRD/MAT1[0] 36 USBH_PWRD
|
||||
* P1[23]/MCFB1/PWM1[4]/MISO0 37 MISO0
|
||||
* P1[24]/MCFB2/PWM1[5]/MOSI0 38 MOSI0
|
||||
* P1[25]/MC1A/MAT1[1] 39 LED1
|
||||
* P1[26]/MC1B/PWM1[6]/CAP0[0] 40 CS_UEXT
|
||||
* P1[27]/CLKOUT/#USB_OVRCR/CAP0[1] 43 #USB_OVRCR
|
||||
* P1[28]/MC2A/PCAP1[0]/MAT0[0] 44 P1.28
|
||||
* P1[29]/MC2B/PCAP1[1]/MAT0[1] 45 P1.29
|
||||
* P1[30]/VBUS/AD0[4] 21 VBUS
|
||||
* P1[31]/SCK1/AD0[5] 20 AIN5
|
||||
* P2[0]/PWM1[1]/TXD1 75 UP
|
||||
* P2[1]/PWM1[2]/RXD1 74 DOWN
|
||||
* P2[2]/PWM1[3]/CTS1/TRACEDATA[3] 73 TRACE_D3
|
||||
* P2[3]/PWM1[4]/DCD1/TRACEDATA[2] 70 TRACE_D2
|
||||
* P2[4]/PWM1[5]/DSR1/TRACEDATA[1] 69 TRACE_D1
|
||||
* P2[5]/PWM1[6]/DTR1/TRACEDATA[0] 68 TRACE_D0
|
||||
* P2[6]/PCAP1[0]/RI1/TRACECLK 67 TRACE_CLK
|
||||
* P2[7]/RD2/RTS1 66 LEFT
|
||||
* P2[8]/TD2/TXD2 65 RIGHT
|
||||
* P2[9]/USB_CONNECT/RXD2 64 USBD_CONNECT
|
||||
* P2[10]/#EINT0/NMI 53 ISP_E4
|
||||
* P2[11]/#EINT1/I2STX_CLK 52 #EINT1
|
||||
* P2[12]/#EINT2/I2STX_WS 51 WAKE-UP
|
||||
* P2[13]/#EINT3/I2STX_SDA 50 BUT2
|
||||
* P3[25]/MAT0[0]/PWM1[2] 27 LCD_RST
|
||||
* P3[26]/STCLK/MAT0[1]/PWM1[3] 26 LCD_BL
|
||||
*/
|
||||
|
||||
/* LEDs GPIO PIN SIGNAL NAME
|
||||
* -------------------------------- ---- --------------
|
||||
* P1[25]/MC1A/MAT1[1] 39 LED1
|
||||
* P0[4]/I2SRX_CLK/RD2/CAP2[0] 81 LED2/ACC IRQ
|
||||
*/
|
||||
|
||||
#define LPC1766STK_LED1 (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT1 | GPIO_PIN25)
|
||||
#define LPC1766STK_LED2 (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN4)
|
||||
|
||||
/* Buttons GPIO PIN SIGNAL NAME
|
||||
* -------------------------------- ---- --------------
|
||||
* P2[12]/#EINT2/I2STX_WS 51 WAKE-UP
|
||||
* P0[23]/AD0[0]/I2SRX_CLK/CAP3[0] 9 BUT1
|
||||
* P2[13]/#EINT3/I2STX_SDA 50 BUT2
|
||||
*/
|
||||
|
||||
#define LPC1766STK_WAKE_UP (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN12)
|
||||
#define LPC1766STK_BUT1 (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN23)
|
||||
#define LPC1766STK_BUT2 (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN13)
|
||||
|
||||
/* Joystick GPIO PIN SIGNAL NAME
|
||||
* -------------------------------- ---- --------------
|
||||
* P0[5]/I2SRX_WS/TD2/CAP2[1] 80 CENTER
|
||||
* P2[0]/PWM1[1]/TXD1 75 UP
|
||||
* P2[1]/PWM1[2]/RXD1 74 DOWN
|
||||
* P2[7]/RD2/RTS1 66 LEFT
|
||||
* P2[8]/TD2/TXD2 65 RIGHT
|
||||
*/
|
||||
|
||||
#define LPC1766STK_CENTER (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN5)
|
||||
#define LPC1766STK_UP (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN0)
|
||||
#define LPC1766STK_DOWN (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN1)
|
||||
#define LPC1766STK_LEFT (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN7)
|
||||
#define LPC1766STK_RIGHT (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN8)
|
||||
|
||||
/* Nokia LCD GPIO PIN SIGNAL NAME
|
||||
* -------------------------------- ---- --------------
|
||||
* P1[21]/MCABORT/PWM1[3]/SSEL0 35 SSEL0
|
||||
* P1[20]/MCFB0/PWM1[2]/SCK0 34 SCK0
|
||||
* P1[23]/MCFB1/PWM1[4]/MISO0 37 MISO0
|
||||
* P1[24]/MCFB2/PWM1[5]/MOSI0 38 MOSI0
|
||||
* P3[25]/MAT0[0]/PWM1[2] 27 LCD_RST
|
||||
* P3[26]/STCLK/MAT0[1]/PWM1[3] 26 LCD_BL (PWM1)
|
||||
*/
|
||||
|
||||
#define LPC1766STK_LCD_CS (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT1 | GPIO_PIN21)
|
||||
#define LPC1766STK_LCD_RST (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT3 | GPIO_PIN25)
|
||||
#define LPC1766STK_LCD_BL GPIO_PWM1p3_3
|
||||
#define GPIO_PWM1p3 GPIO_PWM1p3_3
|
||||
|
||||
/* SD/MMC GPIO PIN SIGNAL NAME
|
||||
* -------------------------------- ---- --------------
|
||||
* P0[6]/I2SRX_SDA/SSEL1/MAT2[0] 79 SSEL1 (active low)
|
||||
* P0[7]/I2STX_CLK/SCK1/MAT2[1] 78 SCK1
|
||||
* P0[8]/I2STX_WS/MISO1/MAT2[2] 77 MISO1
|
||||
* P0[9]/I2STX_SDA/MOSI1/MAT2[3] 76 MOSI1
|
||||
* P0[21]/RI1/RD1 57 MMC PWR (active low)
|
||||
*/
|
||||
|
||||
#define LPC1766STK_MMC_CS (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN6)
|
||||
#define LPC1766STK_MMC_PWR (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN21)
|
||||
|
||||
/* AD GPIO PIN SIGNAL NAME
|
||||
* -------------------------------- ---- --------------
|
||||
* P0[24]/AD0[1]/I2SRX_WS/CAP3[1] 8 TEMP
|
||||
* P0[25]/AD0[2]/I2SRX_SDA/TXD3 7 MIC IN
|
||||
*/
|
||||
|
||||
#define LPC1766STK_TEMP GPIO_AD0p1
|
||||
#define LPC1766STK_MIC_IN GPIO_AD0p2
|
||||
|
||||
/* UEXT GPIO PIN SIGNAL NAME
|
||||
* -------------------------------- ---- --------------
|
||||
* P1[26]/MC1B/PWM1[6]/CAP0[0] 40 CS_UEXT
|
||||
*/
|
||||
|
||||
#define LPC1766STK_CS_UEXT (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT1 | GPIO_PIN26)
|
||||
|
||||
/* ISP? GPIO PIN SIGNAL NAME
|
||||
* -------------------------------- ---- --------------
|
||||
* P2[10]/#EINT0/NMI 53 ISP_E4
|
||||
*/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Types
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public data
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: lpc17_sspinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the Olimex LPC1766-STK board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
extern void weak_function lpc17_sspinitialize(void);
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H */
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
* arch/arm/src/board/up_leds.c
|
||||
*
|
||||
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
|
|
@ -54,8 +54,6 @@
|
|||
|
||||
#include "lpc1766stk_internal.h"
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
|
||||
/****************************************************************************
|
||||
* Definitions
|
||||
****************************************************************************/
|
||||
|
|
@ -92,7 +90,9 @@
|
|||
* Private Data
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
static bool g_uninitialized = true;
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
|
|
@ -117,10 +117,41 @@ void up_ledinit(void)
|
|||
led_dumpgpio("up_ledinit() Exit");
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: lpc17_setled
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef CONFIG_ARCH_LEDS
|
||||
void lpc17_setled(int led, bool ledon)
|
||||
{
|
||||
if (led == BOARD_LED1)
|
||||
{
|
||||
lpc17_gpiowrite(LPC1766STK_LED1, !ledon);
|
||||
}
|
||||
else if (led == BOARD_LED2)
|
||||
{
|
||||
lpc17_gpiowrite(LPC1766STK_LED2, !ledon);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: lpc17_setleds
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef CONFIG_ARCH_LEDS
|
||||
void lpc17_setleds(uint8_t ledset)
|
||||
{
|
||||
lpc17_gpiowrite(LPC1766STK_LED1, (ledset & BOARD_LED1_BIT) == 0);
|
||||
lpc17_gpiowrite(LPC1766STK_LED2, (ledset & BOARD_LED2_BIT) == 0);
|
||||
}
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_ledon
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
void up_ledon(int led)
|
||||
{
|
||||
switch (led)
|
||||
|
|
@ -146,11 +177,13 @@ void up_ledon(int led)
|
|||
break;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_ledoff
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
void up_ledoff(int led)
|
||||
{
|
||||
switch (led)
|
||||
|
|
@ -169,4 +202,4 @@ void up_ledoff(int led)
|
|||
break;
|
||||
}
|
||||
}
|
||||
#endif /* CONFIG_ARCH_LEDS */
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
* arch/arm/src/board/up_nsh.c
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
/****************************************************************************
|
||||
* configs/olimex-lpc1766stk/thttpd/ld.script
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
|
|
@ -80,11 +80,11 @@ SECTIONS
|
|||
*(.ARM.extab*)
|
||||
} >sram
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
} >sram
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
.bss : { /* BSS */
|
||||
_sbss = ABSOLUTE(.);
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
/****************************************************************************
|
||||
* configs/olimex-lpc1766stk/usbserial/ld.script
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
|
|
@ -80,11 +80,11 @@ SECTIONS
|
|||
*(.ARM.extab*)
|
||||
} >sram
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
} >sram
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
.bss : { /* BSS */
|
||||
_sbss = ABSOLUTE(.);
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
/****************************************************************************
|
||||
* configs/olimex-lpc1766stk/usbstorage/ld.script
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
|
|
@ -80,11 +80,11 @@ SECTIONS
|
|||
*(.ARM.extab*)
|
||||
} >sram
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
} >sram
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
.bss : { /* BSS */
|
||||
_sbss = ABSOLUTE(.);
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@
|
|||
* configs/olimex-lpc1766stk/wlan/ld.script
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
|
|
@ -80,11 +80,11 @@ SECTIONS
|
|||
*(.ARM.extab*)
|
||||
} >sram
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
} >sram
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
.bss : { /* BSS */
|
||||
_sbss = ABSOLUTE(.);
|
||||
|
|
|
|||
|
|
@ -917,7 +917,7 @@ CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
|
|||
#
|
||||
# Settings for examples/usbterm
|
||||
#
|
||||
# CONFIG_EXAMPLES_UBSTERM_BUILTIN - Build the usbterm example as an NSH
|
||||
# CONFIG_EXAMPLES_USBTERM_BUILTIN - Build the usbterm example as an NSH
|
||||
# built-in command. NOTE: This is not fully functional as of this
|
||||
# writing.. It should work, but there is no mechanism in place yet
|
||||
# to exit the USB terminal program and return to NSH.
|
||||
|
|
@ -934,7 +934,7 @@ CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
|
|||
# CONFIG_EXAMPLES_USBTERM_TRACECONTROLLER - Show controller events
|
||||
# CONFIG_EXAMPLES_USBTERM_TRACEINTERRUPTS - Show interrupt-related events
|
||||
#
|
||||
CONFIG_EXAMPLES_UBSTERM_BUILTIN=n
|
||||
CONFIG_EXAMPLES_USBTERM_BUILTIN=n
|
||||
CONFIG_EXAMPLES_USBTERM_BUFLEN=256
|
||||
CONFIG_EXAMPLES_USBTERM_TRACEINIT=n
|
||||
CONFIG_EXAMPLES_USBTERM_TRACECLASS=n
|
||||
|
|
|
|||
Loading…
Reference in New Issue