dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity

ST3210E-EVAL: Add power management configuration; move all linker scripts to common files 

git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@4879 7fd9a85b-ad96-42d3-883c-3090e2eb8679
This commit is contained in:
patacongo 2012-06-28 00:48:00 +00:00
parent a37d2e547b
commit 5a86af642e
48 changed files with 880 additions and 2277 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
nuttx/ChangeLog
View File

@ -2936,4 +2936,12 @@
module for testing the on-module SST 25 chip using the NXFFS file system.
* arch/arm/src/lpc43xx and arch/arm/include/lpc43xx: The NXP LPC43xx port
is slowly evolving in these directories.
* configs/stm3210e-eval/pm: Add a new configuration for testing STM32 power
management.
* configs/stm3210e-eval/scripts: Moved all of the duplicate ST3210-EVAL
linker scripts into one set of linker scripts at this location.
* configs/stm3210e-eval/src/up_buttons.c, up_lcd.c, and up_pm.c: New logic
for testing STM32 power management.

3
nuttx/arch/arm/src/stm32/Make.defs
View File

@ -85,11 +85,10 @@ CHIP_CSRCS += stm32_idle.c
endif
CHIP_CSRCS += stm32_pmstop.c stm32_pmstandby.c
ifeq ($(CONFIG_PM),y)
ifneq ($(CONFIG_PM_CUSTOMINIT),y)
CHIP_CSRCS += stm32_pminitialize.c
endif
endif
ifeq ($(CONFIG_STM32_ETHMAC),y)
CHIP_CSRCS += stm32_eth.c

8
nuttx/arch/arm/src/stm32/stm32_bkp.h
View File

@ -1,8 +1,8 @@
/************************************************************************************
* arch/arm/src/stm32/stm32_bkp.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Copyright (C) 2009, 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@ -45,4 +45,8 @@
#include "chip.h"
#include "chip/stm32_bkp.h"
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
#endif /* __ARCH_ARM_SRC_STM32_STM32_BKP_H */

4
nuttx/arch/arm/src/stm32/stm32_pwr.c
View File

@ -48,6 +48,10 @@
#if defined(CONFIG_STM32_PWR)
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/

3
nuttx/arch/arm/src/stm32/stm32f10xxx_rtc.c
View File

@ -6,7 +6,7 @@
*
* With extensions, modifications by:
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Author: Gregroy Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -68,6 +68,7 @@
#include <stdint.h>
#include <stdbool.h>
#include <stdio.h>
#include <errno.h>
#include "up_arch.h"

2
nuttx/arch/arm/src/stm32/stm32f40xxx_rtc.c
View File

@ -631,7 +631,7 @@ int up_rtcinitialize(void)
#endif
g_rtc_enabled = true;
rtc_dumpregs("After Initialzation");
rtc_dumpregs("After Initialization");
return OK;
}

2
nuttx/configs/stm3210e-eval/README.txt
View File

@ -187,7 +187,7 @@ DFU and JTAG
of FLASH (0x08000000) but will be offset to 0x08003000. This offset is needed
to make space for the DFU loader and 0x08003000 is where the DFU loader expects
to find new applications at boot time. If you need to change that origin for some
other bootloader, you will need to edit the file(s) ld.script.dfu for each
other bootloader, you will need to edit the file(s) ld.script.dfu for the
configuration.
The DFU SE PC-based software is available from the STMicro website,

4
nuttx/configs/stm3210e-eval/RIDE/Make.defs
View File

@ -81,14 +81,14 @@ ifeq ($(WINTOOL),y)
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/RIDE/$(LDSCRIPT)}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/RIDE/$(LDSCRIPT)
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc

6
nuttx/configs/stm3210e-eval/buttons/Make.defs
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm3210e-eval/buttons/Make.defs
#
# Copyright (C) 2009 Gregory Nutt. All rights reserved.
# Copyright (C) 2009, 2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -81,14 +81,14 @@ ifeq ($(WINTOOL),y)
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/buttons/$(LDSCRIPT)}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/buttons/$(LDSCRIPT)
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc

112
nuttx/configs/stm3210e-eval/buttons/ld.script
View File

@ -1,112 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/buttons/ld.script
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH,
* FLASH memory is aliased to address 0x0000:0000 where the code expects to
* begin execution by jumping to the entry point in the 0x0800:0000 address
* range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

111
nuttx/configs/stm3210e-eval/buttons/ld.script.dfu
View File

@ -1,111 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/buttons/ld.script.dfu
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the
* STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct
* load .text load address is 0x08003000 (leaving 464Kb).
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

4
nuttx/configs/stm3210e-eval/composite/Make.defs
View File

@ -81,14 +81,14 @@ ifeq ($(WINTOOL),y)
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/$(LDSCRIPT)}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/$(LDSCRIPT)
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc

112
nuttx/configs/stm3210e-eval/composite/ld.script
View File

@ -1,112 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/composite/ld.script
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH,
* FLASH memory is aliased to address 0x0000:0000 where the code expects to
* begin execution by jumping to the entry point in the 0x0800:0000 address
* range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

111
nuttx/configs/stm3210e-eval/composite/ld.script.dfu
View File

@ -1,111 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/composite/ld.script.dfu
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the
* STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct
* load .text load address is 0x08003000 (leaving 464Kb).
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

13
nuttx/configs/stm3210e-eval/include/board.h
View File

@ -314,6 +314,19 @@ EXTERN int stm32_lm75initialize(FAR const char *devpath);
EXTERN xcpt_t stm32_lm75attach(xcpt_t irqhandler);
#endif
/****************************************************************************
* Name: up_pmbuttons
*
* Description:
* Configure all the buttons of the STM3210e-eval board as EXTI,
* so any button is able to wakeup the MCU from the PM_STANDBY mode
*
****************************************************************************/
#if defined(CONFIG_PM) && defined(CONFIG_IDLE_CUSTOM)
EXTERN void up_pmbuttons(void);
#endif
#undef EXTERN
#if defined(__cplusplus)
}

6
nuttx/configs/stm3210e-eval/nsh/Make.defs
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm3210e-eval/nsh/Make.defs
#
# Copyright (C) 2009 Gregory Nutt. All rights reserved.
# Copyright (C) 2009, 2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -81,14 +81,14 @@ ifeq ($(WINTOOL),y)
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/$(LDSCRIPT)}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/$(LDSCRIPT)
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc

112
nuttx/configs/stm3210e-eval/nsh/ld.script
View File

@ -1,112 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/nsh/ld.script
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH,
* FLASH memory is aliased to address 0x0000:0000 where the code expects to
* begin execution by jumping to the entry point in the 0x0800:0000 address
* range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

111
nuttx/configs/stm3210e-eval/nsh/ld.script.dfu
View File

@ -1,111 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/nsh/ld.script.dfu
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the
* STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct
* load .text load address is 0x08003000 (leaving 464Kb).
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

6
nuttx/configs/stm3210e-eval/nsh2/Make.defs
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm3210e-eval/nsh2/Make.defs
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -81,14 +81,14 @@ ifeq ($(WINTOOL),y)
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh2/$(LDSCRIPT)}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh2/$(LDSCRIPT)
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc

112
nuttx/configs/stm3210e-eval/nsh2/ld.script
View File

@ -1,112 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/nsh2/ld.script
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH,
* FLASH memory is aliased to address 0x0000:0000 where the code expects to
* begin execution by jumping to the entry point in the 0x0800:0000 address
* range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

111
nuttx/configs/stm3210e-eval/nsh2/ld.script.dfu
View File

@ -1,111 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/nsh2/ld.script.dfu
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the
* STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct
* load .text load address is 0x08003000 (leaving 464Kb).
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

6
nuttx/configs/stm3210e-eval/nx/Make.defs
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm3210e-eval/nx/Make.defs
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -81,14 +81,14 @@ ifeq ($(WINTOOL),y)
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nx/$(LDSCRIPT)}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nx/$(LDSCRIPT)
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc

112
nuttx/configs/stm3210e-eval/nx/ld.script
View File

@ -1,112 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/nx/ld.script
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH,
* FLASH memory is aliased to address 0x0000:0000 where the code expects to
* begin execution by jumping to the entry point in the 0x0800:0000 address
* range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

111
nuttx/configs/stm3210e-eval/nx/ld.script.dfu
View File

@ -1,111 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/nx/ld.script.dfu
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the
* STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct
* load .text load address is 0x08003000 (leaving 464Kb).
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

4
nuttx/configs/stm3210e-eval/nxconsole/Make.defs
View File

@ -84,13 +84,13 @@ ifeq ($(WINTOOL),y)
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxconsole/$(LDSCRIPT)}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxconsole/$(LDSCRIPT)
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc

6
nuttx/configs/stm3210e-eval/nxlines/Make.defs
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm3210e-eval/nxlines/Make.defs
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -84,13 +84,13 @@ ifeq ($(WINTOOL),y)
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxlines/$(LDSCRIPT)}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxlines/$(LDSCRIPT)
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc

112
nuttx/configs/stm3210e-eval/nxlines/ld.script
View File

@ -1,112 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/nxlines/ld.script
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH,
* FLASH memory is aliased to address 0x0000:0000 where the code expects to
* begin execution by jumping to the entry point in the 0x0800:0000 address
* range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

111
nuttx/configs/stm3210e-eval/nxlines/ld.script.dfu
View File

@ -1,111 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/nxlines/ld.script.dfu
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the
* STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct
* load .text load address is 0x08003000 (leaving 464Kb).
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

6
nuttx/configs/stm3210e-eval/nxtext/Make.defs
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm3210e-eval/nxtext/Make.defs
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -84,13 +84,13 @@ ifeq ($(WINTOOL),y)
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxtext/$(LDSCRIPT)}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxtext/$(LDSCRIPT)
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc

112
nuttx/configs/stm3210e-eval/nxtext/ld.script
View File

@ -1,112 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/nxtext/ld.script
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH,
* FLASH memory is aliased to address 0x0000:0000 where the code expects to
* begin execution by jumping to the entry point in the 0x0800:0000 address
* range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

111
nuttx/configs/stm3210e-eval/nxtext/ld.script.dfu
View File

@ -1,111 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/nxtext/ld.script.dfu
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the
* STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct
* load .text load address is 0x08003000 (leaving 464Kb).
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

6
nuttx/configs/stm3210e-eval/ostest/Make.defs
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm3210e-eval/ostest/Make.defs
#
# Copyright (C) 2009 Gregory Nutt. All rights reserved.
# Copyright (C) 2009, 2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -81,14 +81,14 @@ ifeq ($(WINTOOL),y)
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/$(LDSCRIPT)}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/$(LDSCRIPT)
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc

112
nuttx/configs/stm3210e-eval/ostest/ld.script
View File

@ -1,112 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/ostest/ld.script
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH,
* FLASH memory is aliased to address 0x0000:0000 where the code expects to
* begin execution by jumping to the entry point in the 0x0800:0000 address
* range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

111
nuttx/configs/stm3210e-eval/ostest/ld.script.dfu
View File

@ -1,111 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/ostest/ld.script.dfu
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the
* STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct
* load .text load address is 0x08003000 (leaving 464Kb).
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

4
nuttx/configs/stm3210e-eval/nxconsole/ld.script → nuttx/configs/stm3210e-eval/scripts/ld.script
View File

@ -1,7 +1,7 @@
/****************************************************************************
* configs/stm3210e-eval/nxconsole/ld.script
* configs/stm3210e-eval/scripts/ld.script
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2009, 2011-2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without

4
nuttx/configs/stm3210e-eval/nxconsole/ld.script.dfu → nuttx/configs/stm3210e-eval/scripts/ld.script.dfu
View File

@ -1,7 +1,7 @@
/****************************************************************************
* configs/stm3210e-eval/nxconsole/ld.script.dfu
* configs/stm3210e-eval/scripts/ld.script.dfu
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2009, 2011-2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without

12
nuttx/configs/stm3210e-eval/src/Makefile
View File

@ -76,6 +76,18 @@ ifeq ($(CONFIG_WATCHDOG),y)
CSRCS += up_watchdog.c
endif
ifeq ($(CONFIG_PM_CUSTOMINIT),y)
CSRCS += up_pm.c
endif
ifeq ($(CONFIG_PM),y)
CSRCS += up_pmbuttons.c
endif
ifeq ($(CONFIG_IDLE_CUSTOM),y)
CSRCS += up_idle.c
endif
COBJS = $(CSRCS:.c=$(OBJEXT))
SRCS = $(ASRCS) $(CSRCS)

194
nuttx/configs/stm3210e-eval/src/up_idle.c Normal file
View File

@ -0,0 +1,194 @@
/****************************************************************************
* configs/stm3210e-eval/src/up_idle.c
* arch/arm/src/board/up_idle.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Authors: Gregory Nutt <gnutt@nuttx.org>
* Diego Sanchez <dsanchez@nx-engineering.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <arch/board/board.h>
#include <nuttx/config.h>
#include <nuttx/arch.h>
#include <nuttx/power/pm.h>
#include <debug.h>
#include <nuttx/rtc.h>
#include <arch/irq.h>
#include "stm32_pm.h"
#include "stm32_rcc.h"
#include "up_internal.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Does the board support an IDLE LED to indicate that the board is in the
* IDLE state?
*/
#if defined(CONFIG_ARCH_LEDS) && defined(LED_IDLE)
# define BEGIN_IDLE() up_ledon(LED_IDLE)
# define END_IDLE() up_ledoff(LED_IDLE)
#else
# define BEGIN_IDLE()
# define END_IDLE()
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: up_idlepm
*
* Description:
* Perform IDLE state power management.
*
****************************************************************************/
#ifdef CONFIG_PM
static void up_idlepm(void)
{
static enum pm_state_e oldstate = PM_NORMAL;
enum pm_state_e newstate;
irqstate_t flags;
int ret;
/* Decide, which power saving level can be obtained */
newstate = pm_checkstate();
/* Check for state changes */
if (newstate != oldstate)
{
lldbg("newstate= %d oldstate=%d\n", newstate, oldstate);
flags = irqsave();
/* Force the global state change */
ret = pm_changestate(newstate);
if (ret < 0)
{
/* The new state change failed, revert to the preceding state */
(void)pm_changestate(oldstate);
}
else
{
/* Save the new state */
oldstate = newstate;
}
/* Then perform board-specific, state-dependent logic here */
switch (newstate)
{
case PM_NORMAL:
break;
case PM_IDLE:
break;
case PM_STANDBY:
/* Configure all the buttons as wakeup EXTI */
up_pmbuttons();
/* Call the MCU stop mode */
stm32_pmstop(true);
break;
case PM_SLEEP:
(void)stm32_pmstandby();
break;
default:
break;
}
irqrestore(flags);
}
}
#else
# define up_idlepm()
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_idle
*
* Description:
* up_idle() is the logic that will be executed when their is no other
* ready-to-run task. This is processor idle time and will continue until
* some interrupt occurs to cause a context switch from the idle task.
*
* Processing in this state may be processor-specific. e.g., this is where
* power management operations might be performed.
*
****************************************************************************/
void up_idle(void)
{
#if defined(CONFIG_SUPPRESS_INTERRUPTS) || defined(CONFIG_SUPPRESS_TIMER_INTS)
/* If the system is idle and there are no timer interrupts, then process
* "fake" timer interrupts. Hopefully, something will wake up.
*/
sched_process_timer();
#else
/* Perform IDLE mode power management */
up_idlepm();
/* Sleep until an interrupt occurs to save power */
BEGIN_IDLE();
asm("WFI");
END_IDLE();
#endif
}

1
nuttx/configs/stm3210e-eval/src/up_lcd.c
View File

@ -1179,7 +1179,6 @@ static void stm3210e_pm_notify(struct pm_callback_s *cb , enum pm_state_e pmstat
/* Entering IDLE mode - Turn display off */
#ifdef CONFIG_LCD_PWM
lldbg("power:%d \n", g_lcddev.power);
putreg16(0, STM32_TIM1_CCR1);
#endif
}

141
nuttx/configs/stm3210e-eval/src/up_leds.c
View File

@ -2,8 +2,8 @@
* configs/stm3210e_eval/src/up_leds.c
* arch/arm/src/board/up_leds.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Copyright (C) 2009-2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@ -45,6 +45,7 @@
#include <debug.h>
#include <arch/board/board.h>
#include <nuttx/power/pm.h>
#include "chip.h"
#include "up_arch.h"
@ -132,6 +133,23 @@
#define LED_PANIC_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT)
#define LED_PANIC_OFF_CLRBITS ((STM3210E_LED4) << OFF_CLRBITS_SHIFT)
/**************************************************************************************
* Private Function Protototypes
**************************************************************************************/
/* LED State Controls */
static inline void led_clrbits(unsigned int clrbits);
static inline void led_setbits(unsigned int setbits);
static void led_setonoff(unsigned int bits);
/* LED Power Management */
#ifdef CONFIG_PM
static void led_pm_notify(struct pm_callback_s *cb, enum pm_state_e pmstate);
static int led_pm_prepare(struct pm_callback_s *cb, enum pm_state_e pmstate);
#endif
/****************************************************************************
* Private Data
****************************************************************************/
@ -163,10 +181,26 @@ static const uint16_t g_ledbits[8] =
LED_PANIC_OFF_SETBITS | LED_PANIC_OFF_CLRBITS)
};
#ifdef CONFIG_PM
static struct pm_callback_s g_ledscb =
{
.notify = led_pm_notify,
.prepare = led_pm_prepare,
};
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: led_clrbits
*
* Description:
* Clear all LEDs to the bit encoded state
*
****************************************************************************/
static inline void led_clrbits(unsigned int clrbits)
{
if ((clrbits & STM3210E_LED1) != 0)
@ -190,6 +224,14 @@ static inline void led_clrbits(unsigned int clrbits)
}
}
/****************************************************************************
* Name: led_setbits
*
* Description:
* Set all LEDs to the bit encoded state
*
****************************************************************************/
static inline void led_setbits(unsigned int setbits)
{
if ((setbits & STM3210E_LED1) != 0)
@ -213,12 +255,95 @@ static inline void led_setbits(unsigned int setbits)
}
}
/****************************************************************************
* Name: led_setonoff
*
* Description:
* Set/clear all LEDs to the bit encoded state
*
****************************************************************************/
static void led_setonoff(unsigned int bits)
{
led_clrbits(CLRBITS(bits));
led_setbits(SETBITS(bits));
}
/****************************************************************************
* Name: led_pm_notify
*
* Description:
* Notify the driver of new power state. This callback is called after
* all drivers have had the opportunity to prepare for the new power state.
*
****************************************************************************/
#ifdef CONFIG_PM
static void led_pm_notify(struct pm_callback_s *cb , enum pm_state_e pmstate)
{
switch (pmstate)
{
case(PM_NORMAL):
{
/* Restore normal LEDs operation */
}
break;
case(PM_IDLE):
{
/* Entering IDLE mode - Turn leds off */
}
break;
case(PM_STANDBY):
{
/* Entering STANDBY mode - Logic for PM_STANDBY goes here */
}
break;
case(PM_SLEEP):
{
/* Entering SLEEP mode - Logic for PM_SLEEP goes here */
}
break;
default:
{
/* Should not get here */
}
break;
}
}
#endif
/****************************************************************************
* Name: led_pm_prepare
*
* Description:
* Request the driver to prepare for a new power state. This is a warning
* that the system is about to enter into a new power state. The driver
* should begin whatever operations that may be required to enter power
* state. The driver may abort the state change mode by returning a
* non-zero value from the callback function.
*
****************************************************************************/
#ifdef CONFIG_PM
static int led_pm_prepare(struct pm_callback_s *cb , enum pm_state_e pmstate)
{
/* No preparation to change power modes is required by the LEDs driver.
* We always accept the state change by returning OK.
*/
return OK;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
@ -244,6 +369,18 @@ void up_ledinit(void)
void up_ledon(int led)
{
#ifdef CONFIG_PM
if (led == LED_IRQSENABLED)
{
/* Register to receive power management callbacks */
int ret = pm_register(&g_ledscb);
if (ret != OK)
{
up_ledon(LED_ASSERTION);
}
}
#endif
led_setonoff(ON_BITS(g_ledbits[led]));
}

96
nuttx/configs/stm3210e-eval/src/up_pm.c Normal file
View File

@ -0,0 +1,96 @@
/****************************************************************************
* configs/stm3210e-eval/src/up_pm.c
* arch/arm/src/board/up_pm.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Authors: Gregory Nutt <gnutt@nuttx.org>
* Diego Sanchez <dsanchez@nx-engineering.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/power/pm.h>
#include "up_internal.h"
#include "stm32_pm.h"
#ifdef CONFIG_PM
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_pminitialize
*
* Description:
* This function is called by MCU-specific logic at power-on reset in
* order to provide one-time initialization the power management subystem.
* This function must be called *very* early in the intialization sequence
* *before* any other device drivers are initialized (since they may
* attempt to register with the power management subsystem).
*
* Input parameters:
* None.
*
* Returned value:
* None.
*
****************************************************************************/
void up_pminitialize(void)
{
/* Then initialize the NuttX power management subsystem proper */
pm_initialize();
}
#endif /* CONFIG_PM */

366
nuttx/configs/stm3210e-eval/src/up_pmbuttons.c Normal file
View File

@ -0,0 +1,366 @@
/****************************************************************************
* configs/stm3210e-eval/src/up_pmbuttons.c
* arch/arm/src/board/up_pmbuttons.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Authors: Gregory Nutt <gnutt@nuttx.org>
* Diego Sanchez <dsanchez@nx-engineering.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <arch/board/board.h>
#include <nuttx/config.h>
#include <nuttx/power/pm.h>
#include <arch/irq.h>
#include <stdbool.h>
#include <debug.h>
#include "up_arch.h"
#include "nvic.h"
#include "stm32_pwr.h"
#include "stm32_pm.h"
#if defined(CONFIG_PM) && defined(CONFIG_IDLE_CUSTOM)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#ifndef CONFIG_ARCH_BUTTONS
# error "CONFIG_ARCH_BUTTONS is not defined in the configuration"
#endif
#ifndef CONFIG_PM_BUTTONS_NAME0
# define CONFIG_PM_BUTTONS_NAME0 "BUTTON0"
#endif
#ifndef CONFIG_PM_BUTTONS_NAME1
# define CONFIG_PM_BUTTONS_NAME1 "BUTTON1"
#endif
#ifndef CONFIG_PM_BUTTONS_NAME2
# define CONFIG_PM_BUTTONS_NAME2 "BUTTON2"
#endif
#ifndef CONFIG_PM_BUTTONS_NAME3
# define CONFIG_PM_BUTTONS_NAME3 "BUTTON3"
#endif
#ifndef CONFIG_PM_BUTTONS_NAME4
# define CONFIG_PM_BUTTONS_NAME4 "BUTTON4"
#endif
#ifndef CONFIG_PM_BUTTONS_NAME5
# define CONFIG_PM_BUTTONS_NAME5 "BUTTON5"
#endif
#ifndef CONFIG_PM_BUTTONS_NAME6
# define CONFIG_PM_BUTTONS_NAME6 "BUTTON6"
#endif
#ifndef CONFIG_PM_BUTTONS_NAME7
# define CONFIG_PM_BUTTONS_NAME7 "BUTTON7"
#endif
#define BUTTON_MIN 0
#define BUTTON_MAX 7
#ifndef CONFIG_PM_BUTTONS_MIN
# define CONFIG_PM_BUTTONS_MIN BUTTON_MIN
#endif
#ifndef CONFIG_PM_BUTTONS_MAX
# define CONFIG_PM_BUTTONS_MAX BUTTON_MAX
#endif
#if CONFIG_PM_BUTTONS_MIN > CONFIG_PM_BUTTONS_MAX
# error "CONFIG_PM_BUTTONS_MIN > CONFIG_PM_BUTTONS_MAX"
#endif
#if CONFIG_PM_BUTTONS_MAX > 7
# error "CONFIG_PM_BUTTONS_MAX > 7"
#endif
#ifndef CONFIG_PM_IRQBUTTONS_MIN
# define CONFIG_PM_IRQBUTTONS_MIN CONFIG_PM_BUTTONS_MIN
#endif
#ifndef CONFIG_PM_IRQBUTTONS_MAX
# define CONFIG_PM_IRQBUTTONS_MAX CONFIG_PM_BUTTONS_MAX
#endif
#if CONFIG_PM_IRQBUTTONS_MIN > CONFIG_PM_IRQBUTTONS_MAX
# error "CONFIG_PM_IRQBUTTONS_MIN > CONFIG_PM_IRQBUTTONS_MAX"
#endif
#if CONFIG_PM_IRQBUTTONS_MAX > 7
# error "CONFIG_PM_IRQBUTTONS_MAX > 7"
#endif
#ifndef MIN
# define MIN(a,b) (a < b ? a : b)
#endif
#ifndef MAX
# define MAX(a,b) (a > b ? a : b)
#endif
#define MIN_BUTTON MIN(CONFIG_PM_BUTTONS_MIN, CONFIG_PM_IRQBUTTONS_MIN)
#define MAX_BUTTON MAX(CONFIG_PM_BUTTONS_MAX, CONFIG_PM_IRQBUTTONS_MAX)
#define NUM_PMBUTTONS (MAX_BUTTON - MIN_BUTTON + 1)
#define BUTTON_INDEX(b) ((b)-MIN_BUTTON)
/****************************************************************************
* Private Types
****************************************************************************/
struct button_info_s
{
FAR const char *name; /* Name for the button */
#ifdef CONFIG_ARCH_IRQBUTTONS
xcpt_t handler; /* Button interrupt handler */
#endif
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
#ifdef CONFIG_ARCH_IRQBUTTONS
static void button_handler(int id, int irq);
#if MIN_BUTTON < 1
static int button0_handler(int irq, FAR void *context);
#endif
#if MIN_BUTTON < 2 && MAX_BUTTON > 0
static int button1_handler(int irq, FAR void *context);
#endif
#if MIN_BUTTON < 3 && MAX_BUTTON > 1
static int button2_handler(int irq, FAR void *context);
#endif
#if MIN_BUTTON < 4 && MAX_BUTTON > 2
static int button3_handler(int irq, FAR void *context);
#endif
#if MIN_BUTTON < 5 && MAX_BUTTON > 3
static int button4_handler(int irq, FAR void *context);
#endif
#if MIN_BUTTON < 6 && MAX_BUTTON > 4
static int button5_handler(int irq, FAR void *context);
#endif
#if MIN_BUTTON < 7 && MAX_BUTTON > 5
static int button6_handler(int irq, FAR void *context);
#endif
#if MAX_BUTTON > 6
static int button7_handler(int irq, FAR void *context);
#endif
#endif /* CONFIG_ARCH_IRQBUTTONS */
/****************************************************************************
* Private Data
****************************************************************************/
/* Button Names */
static const struct button_info_s g_buttoninfo[NUM_PMBUTTONS] =
{
#if MIN_BUTTON < 1
{
CONFIG_PM_BUTTONS_NAME0,
#ifdef CONFIG_ARCH_IRQBUTTONS
button0_handler
#endif
},
#endif
#if MIN_BUTTON < 2 && MAX_BUTTON > 0
{
CONFIG_PM_BUTTONS_NAME1,
#ifdef CONFIG_ARCH_IRQBUTTONS
button1_handler
#endif
},
#endif
#if MIN_BUTTON < 3 && MAX_BUTTON > 1
{
CONFIG_PM_BUTTONS_NAME2,
#ifdef CONFIG_ARCH_IRQBUTTONS
button2_handler
#endif
},
#endif
#if MIN_BUTTON < 4 && MAX_BUTTON > 2
{
CONFIG_PM_BUTTONS_NAME3,
#ifdef CONFIG_ARCH_IRQBUTTONS
button3_handler
#endif
},
#endif
#if MIN_BUTTON < 5 && MAX_BUTTON > 3
{
CONFIG_PM_BUTTONS_NAME4,
#ifdef CONFIG_ARCH_IRQBUTTONS
button4_handler
#endif
},
#endif
#if MIN_BUTTON < 6 && MAX_BUTTON > 4
{
CONFIG_PM_BUTTONS_NAME5,
#ifdef CONFIG_ARCH_IRQBUTTONS
button5_handler
#endif
},
#endif
#if MIN_BUTTON < 7 && MAX_BUTTON > 5
{
CONFIG_PM_BUTTONS_NAME6,
#ifdef CONFIG_ARCH_IRQBUTTONS
button6_handler
#endif
},
#endif
#if MAX_BUTTON > 6
{
CONFIG_PM_BUTTONS_NAME7,
#ifdef CONFIG_ARCH_IRQBUTTONS
button7_handler
#endif
}
#endif
};
/****************************************************************************
* Private Functions
****************************************************************************/
#ifdef CONFIG_ARCH_IRQBUTTONS
static void button_handler(int id, int irq)
{
/* For the moment force to the normal state */
(void)pm_changestate(PM_NORMAL);
}
#if MIN_BUTTON < 1
static int button0_handler(int irq, FAR void *context)
{
button_handler(0, irq);
return OK;
}
#endif
#if MIN_BUTTON < 2 && MAX_BUTTON > 0
static int button1_handler(int irq, FAR void *context)
{
button_handler(1, irq);
return OK;
}
#endif
#if MIN_BUTTON < 3 && MAX_BUTTON > 1
static int button2_handler(int irq, FAR void *context)
{
button_handler(2, irq);
return OK;
}
#endif
#if MIN_BUTTON < 4 && MAX_BUTTON > 2
static int button3_handler(int irq, FAR void *context)
{
button_handler(3, irq);
return OK;
}
#endif
#if MIN_BUTTON < 5 && MAX_BUTTON > 3
static int button4_handler(int irq, FAR void *context)
{
button_handler(4, irq);
return OK;
}
#endif
#if MIN_BUTTON < 6 && MAX_BUTTON > 4
static int button5_handler(int irq, FAR void *context)
{
button_handler(5, irq);
return OK;
}
#endif
#if MIN_BUTTON < 7 && MAX_BUTTON > 5
static int button6_handler(int irq, FAR void *context)
{
button_handler(6, irq);
return OK;
}
#endif
#if MAX_BUTTON > 6
static int button7_handler(int irq, FAR void *context)
{
button_handler(7, irq);
return OK;
}
#endif
#endif /* CONFIG_ARCH_IRQBUTTONS */
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_pmbuttons
*
* Description:
* Configure all the buttons of the STM3210e-eval board as EXTI,
* so any button is able to wakeup the MCU from the PM_STANDBY mode
*
****************************************************************************/
void up_pmbuttons(void)
{
/* Initialize the button GPIOs */
up_buttoninit();
#ifdef CONFIG_ARCH_IRQBUTTONS
int i;
for (i = CONFIG_PM_IRQBUTTONS_MIN; i <= CONFIG_PM_IRQBUTTONS_MAX; i++)
{
xcpt_t oldhandler = up_irqbutton(i, g_buttoninfo[BUTTON_INDEX(i)].handler);
if (oldhandler != NULL)
{
lib_lowprintf("WARNING: oldhandler:%p is not NULL! "
"Button events may be lost or aliased!\n",
oldhandler);
}
}
#endif
}
#endif /* defined(CONFIG_PM) && defined(CONFIG_IDLE_CUSTOM) */

6
nuttx/configs/stm3210e-eval/usbserial/Make.defs
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm3210e-eval/usbserial/Make.defs
#
# Copyright (C) 2009 Gregory Nutt. All rights reserved.
# Copyright (C) 2009, 2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -81,14 +81,14 @@ ifeq ($(WINTOOL),y)
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbserial/$(LDSCRIPT)}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbserial/$(LDSCRIPT)
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc

112
nuttx/configs/stm3210e-eval/usbserial/ld.script
View File

@ -1,112 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/usbserial/ld.script
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH,
* FLASH memory is aliased to address 0x0000:0000 where the code expects to
* begin execution by jumping to the entry point in the 0x0800:0000 address
* range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

111
nuttx/configs/stm3210e-eval/usbserial/ld.script.dfu
View File

@ -1,111 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/usbserial/ld.script.dfu
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the
* STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct
* load .text load address is 0x08003000 (leaving 464Kb).
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

6
nuttx/configs/stm3210e-eval/usbstorage/Make.defs
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm3210e-eval/usbstorage/Make.defs
#
# Copyright (C) 2009 Gregory Nutt. All rights reserved.
# Copyright (C) 2009, 2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -81,14 +81,14 @@ ifeq ($(WINTOOL),y)
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/$(LDSCRIPT)}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/$(LDSCRIPT)
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc

112
nuttx/configs/stm3210e-eval/usbstorage/ld.script
View File

@ -1,112 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/usbstorage/ld.script
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH,
* FLASH memory is aliased to address 0x0000:0000 where the code expects to
* begin execution by jumping to the entry point in the 0x0800:0000 address
* range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

111
nuttx/configs/stm3210e-eval/usbstorage/ld.script.dfu
View File

@ -1,111 +0,0 @@
/****************************************************************************
* configs/stm3210e-eval/usbstorage/ld.script.dfu
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
* 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the
* STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct
* load .text load address is 0x08003000 (leaving 464Kb).
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.);
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}