Support for relays on the Shenzhou board (Darcy Gong)

git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5266 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2012-10-27 13:57:17 +00:00
parent 1f1319f25b
commit 54aa383686
5 changed files with 316 additions and 3 deletions

View File

@ -422,6 +422,28 @@ EXTERN void stm32_setleds(uint8_t ledset);
EXTERN void stm32_lcdclear(uint16_t color);
/************************************************************************************
* Relay control functions
*
* Description:
* Non-standard fucntions for relay control from the Shenzhou board.
*
************************************************************************************/
#ifdef CONFIG_ARCH_RELAYS
EXTERN void up_relaysinit(void);
EXTERN void relays_setstat(int relays,bool stat);
EXTERN bool relays_getstat(int relays);
EXTERN void relays_setstats(uint32_t relays_stat);
EXTERN uint32_t relays_getstats(void);
EXTERN void relays_onoff(int relays,uint32_t mdelay);
EXTERN void relays_onoffs(uint32_t relays_stat,uint32_t mdelay);
EXTERN void relays_resetmode(int relays);
EXTERN void relays_powermode(int relays);
EXTERN void relays_resetmodes(uint32_t relays_stat);
EXTERN void relays_powermodes(uint32_t relays_stat);
#endif
#undef EXTERN
#if defined(__cplusplus)
}

View File

@ -56,6 +56,10 @@ ifeq ($(CONFIG_ARCH_BUTTONS),y)
CSRCS += up_buttons.c
endif
ifeq ($(CONFIG_ARCH_RELAYS),y)
CSRCS += up_relays.c
endif
ifeq ($(CONFIG_STM32_OTGFS),y)
CSRCS += up_usb.c
endif

View File

@ -387,10 +387,16 @@
* 58 PD11 SD_CS Active low: Pulled high (See also TFT LCD CN13, pin 32)
*/
#define GPIO_SD_CD (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_EXTI|GPIO_PORTB|GPIO_PIN14)
#define GPIO_SD_CS (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
#define GPIO_SD_CD (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_EXTI|GPIO_PORTB|GPIO_PIN14)
#define GPIO_SD_CS (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN11)
/* Relays */
#define NUM_RELAYS 1
#define GPIO_RELAYS_R00 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN0)
/****************************************************************************************************
* Public Types
****************************************************************************************************/

View File

@ -0,0 +1,276 @@
/****************************************************************************
* configs/shenzhou/src/up_relays.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
* Darcy Gong
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <unistd.h>
#include <arch/board/board.h>
#include "shenzhou-internal.h"
#include <debug.h>
#ifdef CONFIG_ARCH_RELAYS
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define RELAYS_MIN_RESET_TIME 5
#define RELAYS_RESET_MTIME 5
#define RELAYS_POWER_MTIME 50
/****************************************************************************
* Private Data
****************************************************************************/
static uint32_t g_relays_stat = 0;
static const uint16_t g_relays[NUM_RELAYS] =
{
GPIO_RELAYS_R00
#ifdef GPIO_RELAYS_R01
, GPIO_RELAYS_R01
#endif
#ifdef GPIO_RELAYS_R02
, GPIO_RELAYS_R02
#endif
#ifdef GPIO_RELAYS_R03
, GPIO_RELAYS_R03
#endif
#ifdef GPIO_RELAYS_R04
, GPIO_RELAYS_R04
#endif
#ifdef GPIO_RELAYS_R05
, GPIO_RELAYS_R05
#endif
#ifdef GPIO_RELAYS_R06
, GPIO_RELAYS_R06
#endif
#ifdef GPIO_RELAYS_R07
, GPIO_RELAYS_R07
#endif
#ifdef GPIO_RELAYS_R08
, GPIO_RELAYS_R08
#endif
#ifdef GPIO_RELAYS_R09
, GPIO_RELAYS_R09
#endif
#ifdef GPIO_RELAYS_R10
, GPIO_RELAYS_R10
#endif
#ifdef GPIO_RELAYS_R11
, GPIO_RELAYS_R11
#endif
#ifdef GPIO_RELAYS_R12
, GPIO_RELAYS_R12
#endif
#ifdef GPIO_RELAYS_R13
, GPIO_RELAYS_R13
#endif
#ifdef GPIO_RELAYS_R14
, GPIO_RELAYS_R14
#endif
#ifdef GPIO_RELAYS_R15
, GPIO_RELAYS_R15
#endif
#ifdef GPIO_RELAYS_R16
, GPIO_RELAYS_R16
#endif
#ifdef GPIO_RELAYS_R17
, GPIO_RELAYS_R17
#endif
#ifdef GPIO_RELAYS_R18
, GPIO_RELAYS_R18
#endif
#ifdef GPIO_RELAYS_R19
, GPIO_RELAYS_R19
#endif
#ifdef GPIO_RELAYS_R20
, GPIO_RELAYS_R20
#endif
#ifdef GPIO_RELAYS_R21
, GPIO_RELAYS_R21
#endif
#ifdef GPIO_RELAYS_R22
, GPIO_RELAYS_R22
#endif
#ifdef GPIO_RELAYS_R23
, GPIO_RELAYS_R23
#endif
#ifdef GPIO_RELAYS_R24
, GPIO_RELAYS_R24
#endif
#ifdef GPIO_RELAYS_R25
, GPIO_RELAYS_R25
#endif
#ifdef GPIO_RELAYS_R26
, GPIO_RELAYS_R26
#endif
#ifdef GPIO_RELAYS_R27
, GPIO_RELAYS_R27
#endif
#ifdef GPIO_RELAYS_R28
, GPIO_RELAYS_R28
#endif
#ifdef GPIO_RELAYS_R29
, GPIO_RELAYS_R29
#endif
#ifdef GPIO_RELAYS_R30
, GPIO_RELAYS_R30
#endif
#ifdef GPIO_RELAYS_R31
, GPIO_RELAYS_R31
#endif
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
void up_relaysinit(void)
{
int i;
/* Configure the GPIO pins as inputs. NOTE that EXTI interrupts are
* configured for some pins but NOT used in this file
*/
for (i = 0; i < NUM_RELAYS; i++)
{
stm32_configgpio(g_relays[i]);
}
}
void relays_setstat(int relays,bool stat)
{
if ((unsigned)relays < NUM_RELAYS)
{
stm32_gpiowrite(g_relays[relays], stat);
if (!stat)
{
g_relays_stat &= ~(1 << relays);
}
else
{
g_relays_stat |= (1 << relays);
}
}
}
bool relays_getstat(int relays)
{
if ((unsigned)relays < NUM_RELAYS)
{
return (g_relays_stat & (1 << relays)) != 0;
}
return false;
}
void relays_setstats(uint32_t relays_stat)
{
int i;
for (i = 0; i < NUM_RELAYS; i++)
{
relays_setstat(i, (relays_stat & (1<<i))!=0);
}
}
uint32_t relays_getstats(void)
{
return (uint32_t)g_relays_stat;
}
void relays_onoff(int relays, uint32_t mdelay)
{
if ((unsigned)relays < NUM_RELAYS)
{
if (mdelay>0)
{
if (relays_getstat(relays))
{
relays_setstat(relays, false);
usleep(RELAYS_MIN_RESET_TIME*1000*1000);
}
relays_setstat(relays,true);
usleep(mdelay*100*1000);
relays_setstat(relays, false);
}
}
}
void relays_onoffs(uint32_t relays_stat, uint32_t mdelay)
{
int i;
for (i = 0; i < NUM_RELAYS; i++)
{
relays_onoff(i, mdelay);
}
}
void relays_resetmode(int relays)
{
relays_onoff(relays, RELAYS_RESET_MTIME);
}
void relays_powermode(int relays)
{
relays_onoff(relays, RELAYS_POWER_MTIME);
}
void relays_resetmodes(uint32_t relays_stat)
{
relays_onoffs(relays_stat, RELAYS_RESET_MTIME);
}
void relays_powermodes(uint32_t relays_stat)
{
relays_onoffs(relays_stat, RELAYS_POWER_MTIME);
}
#endif /* CONFIG_ARCH_BUTTONS */

View File

@ -1007,7 +1007,12 @@ Where <subdir> is one of the following:
3. By default, this project assumes that you are *NOT* using the DFU
bootloader.
4. This configuration requires that you have the genromfs tool installed
4. It appears that you cannot excute from CCM RAM. This is why the
following definition appears in the defconfig file:
CONFIG_STM32_CCMEXCLUDE=y
5. This configuration requires that you have the genromfs tool installed
on your system and that you have the full path to the installed genromfs
executable in PATH variable (see apps/examples/README.txt)