Add STM32F4 discovery config.

This commit is contained in:
Lorenz Meier 2015-04-16 22:50:24 +02:00
parent bb9e5d0d4c
commit 3ee9b441c6
21 changed files with 2397 additions and 4 deletions

View File

@ -0,0 +1,12 @@
{
"board_id": 99,
"magic": "PX4FWv1",
"description": "Firmware for the STM32F4Discovery board",
"image": "",
"build_time": 0,
"summary": "PX4/STM32F4Discovery",
"version": "0.1",
"image_size": 0,
"git_identity": "",
"board_revision": 0
}

View File

@ -0,0 +1,11 @@
#
# Board-specific definitions for the PX4_STM32F4DISCOVERY
#
#
# Configure the toolchain
#
CONFIG_ARCH = CORTEXM4F
CONFIG_BOARD = PX4_STM32F4DISCOVERY
include $(PX4_MK_DIR)/toolchain_gnu-arm-eabi.mk

View File

@ -0,0 +1,92 @@
#
# Makefile for the px4fmu_default configuration
#
#
# Use the configuration's ROMFS, copy the PX4_STM32F4DISCOVERY firmware into
# the ROMFS if it's available
#
ROMFS_ROOT = $(PX4_BASE)/ROMFS/px4fmu_common
ROMFS_OPTIONAL_FILES =
#
# Board support modules
#
MODULES += drivers/device
MODULES += drivers/stm32
MODULES += drivers/led
MODULES += drivers/boards/px4-stm32f4discovery
#
# System commands
#
MODULES += systemcmds/bl_update
MODULES += systemcmds/mixer
MODULES += systemcmds/param
MODULES += systemcmds/perf
MODULES += systemcmds/reboot
MODULES += systemcmds/top
MODULES += systemcmds/tests
MODULES += systemcmds/config
MODULES += systemcmds/nshterm
MODULES += systemcmds/ver
#
# Library modules
#
MODULES += modules/systemlib
MODULES += modules/systemlib/mixer
MODULES += modules/controllib
MODULES += modules/uORB
#
# Libraries
#
LIBRARIES += lib/mathlib/CMSIS
MODULES += lib/mathlib
MODULES += lib/mathlib/math/filter
MODULES += lib/ecl
MODULES += lib/external_lgpl
MODULES += lib/geo
MODULES += lib/conversion
MODULES += platforms/nuttx
#
# Demo apps
#
#MODULES += examples/math_demo
# Tutorial code from
# https://pixhawk.ethz.ch/px4/dev/hello_sky
MODULES += examples/px4_simple_app
# Tutorial code from
# https://pixhawk.ethz.ch/px4/dev/daemon
#MODULES += examples/px4_daemon_app
# Tutorial code from
# https://pixhawk.ethz.ch/px4/dev/debug_values
#MODULES += examples/px4_mavlink_debug
# Tutorial code from
# https://pixhawk.ethz.ch/px4/dev/example_fixedwing_control
#MODULES += examples/fixedwing_control
# Hardware test
#MODULES += examples/hwtest
#
# Transitional support - add commands from the NuttX export archive.
#
# In general, these should move to modules over time.
#
# Each entry here is <command>.<priority>.<stacksize>.<entrypoint> but we use a helper macro
# to make the table a bit more readable.
#
define _B
$(strip $1).$(or $(strip $2),SCHED_PRIORITY_DEFAULT).$(or $(strip $3),CONFIG_PTHREAD_STACK_DEFAULT).$(strip $4)
endef
# command priority stack entrypoint
BUILTIN_COMMANDS := \
$(call _B, sercon, , 2048, sercon_main ) \
$(call _B, serdis, , 2048, serdis_main )

View File

@ -33,7 +33,8 @@ upload-serial-px4fmu-v2: $(BUNDLE) $(UPLOADER)
upload-serial-aerocore:
openocd -f $(PX4_BASE)/makefiles/gumstix-aerocore.cfg -c 'init; reset halt; flash write_image erase $(PX4_BASE)/../Bootloader/px4aerocore_bl.bin 0x08000000; flash write_image erase $(PX4_BASE)/Build/aerocore_default.build/firmware.bin 0x08004000; reset run; exit'
upload-serial-px4-stm32f4discovery: $(BUNDLE) $(UPLOADER)
$(Q) $(PYTHON) -u $(UPLOADER) --port $(SERIAL_PORTS) $(BUNDLE)
#
# JTAG firmware uploading with OpenOCD

View File

@ -0,0 +1,273 @@
/************************************************************************************
* configs/stm32f4discovery/include/board.h
* include/arch/board/board.h
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIG_PX4FMU_V1_INCLUDE_BOARD_H
#define __CONFIG_PX4FMU_V1_INCLUDE_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
#include "stm32_rcc.h"
#include "stm32_sdio.h"
#include "stm32.h"
/************************************************************************************
* Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* The STM32F4 Discovery board features a single 8MHz crystal. Space is provided
* for a 32kHz RTC backup crystal, but it is not stuffed.
*
* This is the canonical configuration:
* System Clock source : PLL (HSE)
* SYSCLK(Hz) : 168000000 Determined by PLL configuration
* HCLK(Hz) : 168000000 (STM32_RCC_CFGR_HPRE)
* AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE)
* APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1)
* APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2)
* HSE Frequency(Hz) : 8000000 (STM32_BOARD_XTAL)
* PLLM : 8 (STM32_PLLCFG_PLLM)
* PLLN : 336 (STM32_PLLCFG_PLLN)
* PLLP : 2 (STM32_PLLCFG_PLLP)
* PLLQ : 7 (STM32_PLLCFG_PLLQ)
* Main regulator output voltage : Scale1 mode Needed for high speed SYSCLK
* Flash Latency(WS) : 5
* Prefetch Buffer : OFF
* Instruction cache : ON
* Data cache : ON
* Require 48MHz for USB OTG FS, : Enabled
* SDIO and RNG clock
*/
/* HSI - 16 MHz RC factory-trimmed
* LSI - 32 KHz RC
* HSE - On-board crystal frequency is 8MHz
* LSE - 32.768 kHz
*/
#define STM32_BOARD_XTAL 8000000ul
#define STM32_HSI_FREQUENCY 16000000ul
#define STM32_LSI_FREQUENCY 32000
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
#define STM32_LSE_FREQUENCY 32768
/* Main PLL Configuration.
*
* PLL source is HSE
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
* = (8,000,000 / 8) * 336
* = 336,000,000
* SYSCLK = PLL_VCO / PLLP
* = 336,000,000 / 2 = 168,000,000
* USB OTG FS, SDIO and RNG Clock
* = PLL_VCO / PLLQ
* = 48,000,000
*/
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(8)
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(336)
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(7)
#define STM32_SYSCLK_FREQUENCY 168000000ul
/* AHB clock (HCLK) is SYSCLK (168MHz) */
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
/* Timers driven from APB1 will be twice PCLK1 */
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
/* APB2 clock (PCLK2) is HCLK/2 (84MHz) */
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* Timers driven from APB2 will be twice PCLK2 */
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
* otherwise frequency is 2xAPBx.
* Note: TIM1,8 are on APB2, others on APB1
*/
#define STM32_TIM18_FREQUENCY (2*STM32_PCLK2_FREQUENCY)
#define STM32_TIM27_FREQUENCY (2*STM32_PCLK1_FREQUENCY)
/* LED definitions ******************************************************************/
/* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any
* way. The following definitions are used to access individual LEDs.
*/
/* LED index values for use with stm32_setled() */
#define BOARD_LED1 0
#define BOARD_LED2 1
#define BOARD_NLEDS 2
#define BOARD_LED_BLUE BOARD_LED1
#define BOARD_LED_RED BOARD_LED2
/* LED bits for use with stm32_setleds() */
#define BOARD_LED1_BIT (1 << BOARD_LED1)
#define BOARD_LED2_BIT (1 << BOARD_LED2)
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 2 LEDs on board the
* px4fmu-v1. The following definitions describe how NuttX controls the LEDs:
*/
#define LED_STARTED 0 /* LED1 */
#define LED_HEAPALLOCATE 1 /* LED2 */
#define LED_IRQSENABLED 2 /* LED1 */
#define LED_STACKCREATED 3 /* LED1 + LED2 */
#define LED_INIRQ 4 /* LED1 */
#define LED_SIGNAL 5 /* LED2 */
#define LED_ASSERTION 6 /* LED1 + LED2 */
#define LED_PANIC 7 /* LED1 + LED2 */
/* Alternate function pin selections ************************************************/
/* UART2:
*
* The STM32F4 Discovery has no on-board serial devices, but the console is
* brought out to PA2 (TX) and PA3 (RX) for connection to an external serial device.
* (See the README.txt file for other options)
*/
#define GPIO_USART2_RX GPIO_USART2_RX_1
#define GPIO_USART2_TX GPIO_USART2_TX_1
/* SPI - There is a MEMS device on SPI1 using these pins: */
#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1
#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1
#define GPIO_SPI1_SCK GPIO_SPI1_SCK_1
/*
* I2C
*
* The optional _GPIO configurations allow the I2C driver to manually
* reset the bus to clear stuck slaves. They match the pin configuration,
* but are normally-high GPIOs.
*/
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_1
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2
#define GPIO_I2C1_SCL_GPIO (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN6)
#define GPIO_I2C1_SDA_GPIO (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN9)
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
EXTERN void stm32_boardinitialize(void);
/************************************************************************************
* Name: stm32_ledinit, stm32_setled, and stm32_setleds
*
* Description:
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board LEDs. If
* CONFIG_ARCH_LEDS is not defined, then the following interfacesare available to
* control the LEDs from user applications.
*
************************************************************************************/
#ifndef CONFIG_ARCH_LEDS
EXTERN void stm32_ledinit(void);
EXTERN void stm32_setled(int led, bool ledon);
EXTERN void stm32_setleds(uint8_t ledset);
#endif
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIG_PX4FMU_V1_INCLUDE_BOARD_H */

View File

@ -0,0 +1,42 @@
/****************************************************************************
*
* Copyright (C) 2013 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* nsh_romfsetc.h
*
* This file is a stub for 'make export' purposes; the actual ROMFS
* must be supplied by the library client.
*/
extern unsigned char romfs_img[];
extern unsigned int romfs_img_len;

View File

@ -0,0 +1,179 @@
############################################################################
# configs/px4fmu-v2/nsh/Make.defs
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
#
# We only support building with the ARM bare-metal toolchain from
# https://launchpad.net/gcc-arm-embedded on Windows, Linux or Mac OS.
#
CONFIG_ARMV7M_TOOLCHAIN := GNU_EABI
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
MAXOPTIMIZATION = -O3
ARCHCPUFLAGS = -mcpu=cortex-m4 \
-mthumb \
-march=armv7e-m \
-mfpu=fpv4-sp-d16 \
-mfloat-abi=hard
# enable precise stack overflow tracking
INSTRUMENTATIONDEFINES = -finstrument-functions \
-ffixed-r10
# pull in *just* libm from the toolchain ... this is grody
LIBM = "${shell $(CC) $(ARCHCPUFLAGS) -print-file-name=libm.a}"
EXTRA_LIBS += $(LIBM)
# use our linker script
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
else
ifeq ($(PX4_WINTOOL),y)
# Windows-native toolchains (MSYS)
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
endif
# tool versions
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
# optimisation flags
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) \
-fno-strict-aliasing \
-fno-strength-reduce \
-fomit-frame-pointer \
-funsafe-math-optimizations \
-fno-builtin-printf \
-ffunction-sections \
-fdata-sections
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
ARCHOPTIMIZATION += -g
endif
ARCHCFLAGS = -std=gnu99
ARCHCXXFLAGS = -fno-exceptions -fno-rtti -std=gnu++0x
ARCHWARNINGS = -Wall \
-Wextra \
-Wdouble-promotion \
-Wshadow \
-Wfloat-equal \
-Wframe-larger-than=1024 \
-Wpointer-arith \
-Wlogical-op \
-Wmissing-declarations \
-Wpacked \
-Wno-unused-parameter
# -Wcast-qual - generates spurious noreturn attribute warnings, try again later
# -Wconversion - would be nice, but too many "risky-but-safe" conversions in the code
# -Wcast-align - would help catch bad casts in some cases, but generates too many false positives
ARCHCWARNINGS = $(ARCHWARNINGS) \
-Wbad-function-cast \
-Wstrict-prototypes \
-Wold-style-declaration \
-Wmissing-parameter-type \
-Wmissing-prototypes \
-Wnested-externs \
-Wunsuffixed-float-constants
ARCHWARNINGSXX = $(ARCHWARNINGS) \
-Wno-psabi
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
# this seems to be the only way to add linker flags
EXTRA_LIBS += --warn-common \
--gc-sections
CFLAGS = $(ARCHCFLAGS) $(ARCHCWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -fno-common
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
# produce partially-linked $1 from files in $2
define PRELINK
@echo "PRELINK: $1"
$(Q) $(LD) -Ur -o $1 $2 && $(OBJCOPY) --localize-hidden $1
endef
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

View File

@ -0,0 +1,48 @@
############################################################################
# configs/px4fmu/nsh/appconfig
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
# Path to example in apps/examples containing the user_start entry point
CONFIGURED_APPS += examples/nsh
# The NSH application library
CONFIGURED_APPS += nshlib
CONFIGURED_APPS += system/readline
#ifeq ($(CONFIG_USBDEV),y)
#ifeq ($(CONFIG_CDCACM),y)
CONFIGURED_APPS += examples/cdcacm
#endif
#endif

View File

@ -0,0 +1,897 @@
#
# Automatically generated file; DO NOT EDIT.
# Nuttx/ Configuration
#
CONFIG_NUTTX_NEWCONFIG=y
#
# Build Setup
#
# CONFIG_EXPERIMENTAL is not set
# CONFIG_HOST_LINUX is not set
CONFIG_HOST_OSX=y
# CONFIG_HOST_WINDOWS is not set
# CONFIG_HOST_OTHER is not set
#
# Build Configuration
#
CONFIG_APPS_DIR="../apps"
# CONFIG_BUILD_2PASS is not set
#
# Binary Output Formats
#
# CONFIG_RRLOAD_BINARY is not set
# CONFIG_INTELHEX_BINARY is not set
# CONFIG_MOTOROLA_SREC is not set
CONFIG_RAW_BINARY=y
#
# Customize Header Files
#
# CONFIG_ARCH_STDBOOL_H is not set
CONFIG_ARCH_MATH_H=y
# CONFIG_ARCH_FLOAT_H is not set
# CONFIG_ARCH_STDARG_H is not set
#
# Debug Options
#
# CONFIG_DEBUG is not set
CONFIG_DEBUG_SYMBOLS=y
#
# System Type
#
# CONFIG_ARCH_8051 is not set
CONFIG_ARCH_ARM=y
# CONFIG_ARCH_AVR is not set
# CONFIG_ARCH_HC is not set
# CONFIG_ARCH_MIPS is not set
# CONFIG_ARCH_RGMP is not set
# CONFIG_ARCH_SH is not set
# CONFIG_ARCH_SIM is not set
# CONFIG_ARCH_X86 is not set
# CONFIG_ARCH_Z16 is not set
# CONFIG_ARCH_Z80 is not set
CONFIG_ARCH="arm"
#
# ARM Options
#
# CONFIG_ARCH_CHIP_C5471 is not set
# CONFIG_ARCH_CHIP_CALYPSO is not set
# CONFIG_ARCH_CHIP_DM320 is not set
# CONFIG_ARCH_CHIP_IMX is not set
# CONFIG_ARCH_CHIP_KINETIS is not set
# CONFIG_ARCH_CHIP_KL is not set
# CONFIG_ARCH_CHIP_LM is not set
# CONFIG_ARCH_CHIP_LPC17XX is not set
# CONFIG_ARCH_CHIP_LPC214X is not set
# CONFIG_ARCH_CHIP_LPC2378 is not set
# CONFIG_ARCH_CHIP_LPC31XX is not set
# CONFIG_ARCH_CHIP_LPC43XX is not set
# CONFIG_ARCH_CHIP_NUC1XX is not set
# CONFIG_ARCH_CHIP_SAM34 is not set
CONFIG_ARCH_CHIP_STM32=y
# CONFIG_ARCH_CHIP_STR71X is not set
CONFIG_ARCH_CORTEXM4=y
CONFIG_ARCH_FAMILY="armv7-m"
CONFIG_ARCH_CHIP="stm32"
CONFIG_ARMV7M_USEBASEPRI=y
CONFIG_ARCH_HAVE_CMNVECTOR=y
CONFIG_ARMV7M_CMNVECTOR=y
CONFIG_ARCH_HAVE_FPU=y
CONFIG_ARCH_FPU=y
CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_MPU is not set
#
# ARMV7M Configuration Options
#
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
CONFIG_ARMV7M_STACKCHECK=y
CONFIG_SERIAL_TERMIOS=y
#
# STM32 Configuration Options
#
# CONFIG_ARCH_CHIP_STM32L151C6 is not set
# CONFIG_ARCH_CHIP_STM32L151C8 is not set
# CONFIG_ARCH_CHIP_STM32L151CB is not set
# CONFIG_ARCH_CHIP_STM32L151R6 is not set
# CONFIG_ARCH_CHIP_STM32L151R8 is not set
# CONFIG_ARCH_CHIP_STM32L151RB is not set
# CONFIG_ARCH_CHIP_STM32L151V6 is not set
# CONFIG_ARCH_CHIP_STM32L151V8 is not set
# CONFIG_ARCH_CHIP_STM32L151VB is not set
# CONFIG_ARCH_CHIP_STM32L152C6 is not set
# CONFIG_ARCH_CHIP_STM32L152C8 is not set
# CONFIG_ARCH_CHIP_STM32L152CB is not set
# CONFIG_ARCH_CHIP_STM32L152R6 is not set
# CONFIG_ARCH_CHIP_STM32L152R8 is not set
# CONFIG_ARCH_CHIP_STM32L152RB is not set
# CONFIG_ARCH_CHIP_STM32L152V6 is not set
# CONFIG_ARCH_CHIP_STM32L152V8 is not set
# CONFIG_ARCH_CHIP_STM32L152VB is not set
# CONFIG_ARCH_CHIP_STM32F100C8 is not set
# CONFIG_ARCH_CHIP_STM32F100CB is not set
# CONFIG_ARCH_CHIP_STM32F100R8 is not set
# CONFIG_ARCH_CHIP_STM32F100RB is not set
# CONFIG_ARCH_CHIP_STM32F100RC is not set
# CONFIG_ARCH_CHIP_STM32F100RD is not set
# CONFIG_ARCH_CHIP_STM32F100RE is not set
# CONFIG_ARCH_CHIP_STM32F100V8 is not set
# CONFIG_ARCH_CHIP_STM32F100VB is not set
# CONFIG_ARCH_CHIP_STM32F100VC is not set
# CONFIG_ARCH_CHIP_STM32F100VD is not set
# CONFIG_ARCH_CHIP_STM32F100VE is not set
# CONFIG_ARCH_CHIP_STM32F103C4 is not set
# CONFIG_ARCH_CHIP_STM32F103C8 is not set
# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
# CONFIG_ARCH_CHIP_STM32F107VC is not set
# CONFIG_ARCH_CHIP_STM32F207IG is not set
# CONFIG_ARCH_CHIP_STM32F302CB is not set
# CONFIG_ARCH_CHIP_STM32F302CC is not set
# CONFIG_ARCH_CHIP_STM32F302RB is not set
# CONFIG_ARCH_CHIP_STM32F302RC is not set
# CONFIG_ARCH_CHIP_STM32F302VB is not set
# CONFIG_ARCH_CHIP_STM32F302VC is not set
# CONFIG_ARCH_CHIP_STM32F303CB is not set
# CONFIG_ARCH_CHIP_STM32F303CC is not set
# CONFIG_ARCH_CHIP_STM32F303RB is not set
# CONFIG_ARCH_CHIP_STM32F303RC is not set
# CONFIG_ARCH_CHIP_STM32F303VB is not set
# CONFIG_ARCH_CHIP_STM32F303VC is not set
# CONFIG_ARCH_CHIP_STM32F405RG is not set
# CONFIG_ARCH_CHIP_STM32F405VG is not set
# CONFIG_ARCH_CHIP_STM32F405ZG is not set
# CONFIG_ARCH_CHIP_STM32F407VE is not set
CONFIG_ARCH_CHIP_STM32F407VG=y
# CONFIG_ARCH_CHIP_STM32F407ZE is not set
# CONFIG_ARCH_CHIP_STM32F407ZG is not set
# CONFIG_ARCH_CHIP_STM32F407IE is not set
# CONFIG_ARCH_CHIP_STM32F407IG is not set
# CONFIG_ARCH_CHIP_STM32F427V is not set
# CONFIG_ARCH_CHIP_STM32F427Z is not set
# CONFIG_ARCH_CHIP_STM32F427I is not set
# CONFIG_STM32_STM32L15XX is not set
# CONFIG_STM32_ENERGYLITE is not set
# CONFIG_STM32_STM32F10XX is not set
# CONFIG_STM32_VALUELINE is not set
# CONFIG_STM32_CONNECTIVITYLINE is not set
# CONFIG_STM32_PERFORMANCELINE is not set
# CONFIG_STM32_HIGHDENSITY is not set
# CONFIG_STM32_MEDIUMDENSITY is not set
# CONFIG_STM32_LOWDENSITY is not set
# CONFIG_STM32_STM32F20XX is not set
# CONFIG_STM32_STM32F30XX is not set
CONFIG_STM32_STM32F40XX=y
# CONFIG_STM32_STM32F427 is not set
# CONFIG_STM32_DFU is not set
#
# STM32 Peripheral Support
#
CONFIG_STM32_ADC1=y
# CONFIG_STM32_ADC2 is not set
# CONFIG_STM32_ADC3 is not set
CONFIG_STM32_BKPSRAM=y
# CONFIG_STM32_CAN1 is not set
# CONFIG_STM32_CAN2 is not set
CONFIG_STM32_CCMDATARAM=y
# CONFIG_STM32_CRC is not set
# CONFIG_STM32_CRYP is not set
CONFIG_STM32_DMA1=y
CONFIG_STM32_DMA2=y
# CONFIG_STM32_DAC1 is not set
# CONFIG_STM32_DAC2 is not set
# CONFIG_STM32_DCMI is not set
# CONFIG_STM32_ETHMAC is not set
# CONFIG_STM32_FSMC is not set
# CONFIG_STM32_HASH is not set
CONFIG_STM32_I2C1=y
# CONFIG_STM32_I2C2 is not set
# CONFIG_STM32_I2C3 is not set
CONFIG_STM32_OTGFS=y
# CONFIG_STM32_OTGHS is not set
CONFIG_STM32_PWR=y
# CONFIG_STM32_RNG is not set
# CONFIG_STM32_SDIO is not set
CONFIG_STM32_SPI1=y
# CONFIG_STM32_SPI2 is not set
# CONFIG_STM32_SPI3 is not set
# CONFIG_STM32_SPI4 is not set
# CONFIG_STM32_SPI5 is not set
# CONFIG_STM32_SPI6 is not set
CONFIG_STM32_SYSCFG=y
CONFIG_STM32_TIM1=y
# CONFIG_STM32_TIM2 is not set
CONFIG_STM32_TIM3=y
CONFIG_STM32_TIM4=y
# CONFIG_STM32_TIM5 is not set
# CONFIG_STM32_TIM6 is not set
# CONFIG_STM32_TIM7 is not set
# CONFIG_STM32_TIM8 is not set
CONFIG_STM32_TIM9=y
CONFIG_STM32_TIM10=y
CONFIG_STM32_TIM11=y
# CONFIG_STM32_TIM12 is not set
# CONFIG_STM32_TIM13 is not set
# CONFIG_STM32_TIM14 is not set
# CONFIG_STM32_USART1 is not set
CONFIG_STM32_USART2=y
# CONFIG_STM32_USART3 is not set
# CONFIG_STM32_UART4 is not set
# CONFIG_STM32_UART5 is not set
# CONFIG_STM32_USART6 is not set
# CONFIG_STM32_UART7 is not set
# CONFIG_STM32_UART8 is not set
# CONFIG_STM32_IWDG is not set
# CONFIG_STM32_WWDG is not set
CONFIG_STM32_ADC=y
CONFIG_STM32_SPI=y
CONFIG_STM32_I2C=y
#
# Alternate Pin Mapping
#
CONFIG_STM32_FLASH_PREFETCH=y
# CONFIG_STM32_JTAG_DISABLE is not set
# CONFIG_STM32_JTAG_FULL_ENABLE is not set
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
CONFIG_STM32_JTAG_SW_ENABLE=y
CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
# CONFIG_STM32_FORCEPOWER is not set
# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
# CONFIG_STM32_CCMEXCLUDE is not set
CONFIG_STM32_DMACAPABLE=y
# CONFIG_STM32_TIM1_PWM is not set
# CONFIG_STM32_TIM3_PWM is not set
# CONFIG_STM32_TIM4_PWM is not set
# CONFIG_STM32_TIM9_PWM is not set
# CONFIG_STM32_TIM10_PWM is not set
# CONFIG_STM32_TIM11_PWM is not set
# CONFIG_STM32_TIM1_ADC is not set
# CONFIG_STM32_TIM3_ADC is not set
# CONFIG_STM32_TIM4_ADC is not set
CONFIG_STM32_USART=y
#
# U[S]ART Configuration
#
# CONFIG_USART2_RS485 is not set
CONFIG_USART2_RXDMA=y
CONFIG_SERIAL_DISABLE_REORDERING=y
CONFIG_STM32_USART_SINGLEWIRE=y
#
# SPI Configuration
#
# CONFIG_STM32_SPI_INTERRUPTS is not set
# CONFIG_STM32_SPI_DMA is not set
#
# I2C Configuration
#
# CONFIG_STM32_I2C_DYNTIMEO is not set
CONFIG_STM32_I2CTIMEOSEC=0
CONFIG_STM32_I2CTIMEOMS=500
CONFIG_STM32_I2CTIMEOTICKS=500
# CONFIG_STM32_I2C_DUTY16_9 is not set
#
# USB Host Configuration
#
#
# USB Device Configuration
#
#
# External Memory Configuration
#
#
# Architecture Options
#
# CONFIG_ARCH_NOINTC is not set
# CONFIG_ARCH_VECNOTIRQ is not set
CONFIG_ARCH_DMA=y
CONFIG_ARCH_IRQPRIO=y
# CONFIG_CUSTOM_STACK is not set
# CONFIG_ADDRENV is not set
CONFIG_ARCH_HAVE_VFORK=y
CONFIG_ARCH_STACKDUMP=y
# CONFIG_ENDIAN_BIG is not set
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
CONFIG_ARCH_HAVE_RAMVECTORS=y
# CONFIG_ARCH_RAMVECTORS is not set
#
# Board Settings
#
CONFIG_BOARD_LOOPSPERMSEC=16717
# CONFIG_ARCH_CALIBRATION is not set
CONFIG_DRAM_START=0x20000000
CONFIG_DRAM_SIZE=196608
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
CONFIG_ARCH_INTERRUPTSTACK=4096
#
# Boot options
#
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
CONFIG_BOOT_RUNFROMFLASH=y
# CONFIG_BOOT_RUNFROMISRAM is not set
# CONFIG_BOOT_RUNFROMSDRAM is not set
# CONFIG_BOOT_COPYTORAM is not set
#
# Board Selection
#
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD=""
#
# Common Board Options
#
CONFIG_NSH_MMCSDMINOR=0
#
# Board-Specific Options
#
#
# RTOS Features
#
# CONFIG_BOARD_INITIALIZE is not set
CONFIG_MSEC_PER_TICK=1
CONFIG_RR_INTERVAL=0
CONFIG_SCHED_INSTRUMENTATION=y
CONFIG_TASK_NAME_SIZE=24
# CONFIG_SCHED_HAVE_PARENT is not set
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=1970
CONFIG_START_MONTH=1
CONFIG_START_DAY=1
CONFIG_DEV_CONSOLE=y
# CONFIG_MUTEX_TYPES is not set
CONFIG_PRIORITY_INHERITANCE=y
CONFIG_SEM_PREALLOCHOLDERS=0
CONFIG_SEM_NNESTPRIO=8
# CONFIG_FDCLONE_DISABLE is not set
CONFIG_FDCLONE_STDIO=y
CONFIG_SDCLONE_DISABLE=y
CONFIG_SCHED_WAITPID=y
# CONFIG_SCHED_STARTHOOK is not set
CONFIG_SCHED_ATEXIT=y
CONFIG_SCHED_ATEXIT_MAX=1
# CONFIG_SCHED_ONEXIT is not set
CONFIG_USER_ENTRYPOINT="nsh_main"
# CONFIG_DISABLE_OS_API is not set
#
# Signal Numbers
#
CONFIG_SIG_SIGUSR1=1
CONFIG_SIG_SIGUSR2=2
CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
CONFIG_SIG_SIGWORK=4
#
# Sizes of configurable things (0 disables)
#
CONFIG_MAX_TASKS=32
CONFIG_MAX_TASK_ARGS=10
CONFIG_NPTHREAD_KEYS=4
CONFIG_NFILE_DESCRIPTORS=32
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_MQ_MAXMSGSIZE=32
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=50
CONFIG_PREALLOC_TIMERS=50
#
# Stack and heap information
#
CONFIG_IDLETHREAD_STACKSIZE=6000
CONFIG_USERMAIN_STACKSIZE=4096
CONFIG_PTHREAD_STACK_MIN=512
CONFIG_PTHREAD_STACK_DEFAULT=2048
#
# Device Drivers
#
# CONFIG_DISABLE_POLL is not set
CONFIG_DEV_NULL=y
# CONFIG_DEV_ZERO is not set
# CONFIG_LOOP is not set
# CONFIG_RAMDISK is not set
# CONFIG_CAN is not set
# CONFIG_PWM is not set
CONFIG_I2C=y
# CONFIG_I2C_SLAVE is not set
CONFIG_I2C_TRANSFER=y
# CONFIG_I2C_WRITEREAD is not set
# CONFIG_I2C_POLLED is not set
# CONFIG_I2C_TRACE is not set
CONFIG_ARCH_HAVE_I2CRESET=y
CONFIG_I2C_RESET=y
CONFIG_SPI=y
# CONFIG_SPI_OWNBUS is not set
CONFIG_SPI_EXCHANGE=y
# CONFIG_SPI_CMDDATA is not set
# CONFIG_RTC is not set
CONFIG_WATCHDOG=y
# CONFIG_ANALOG is not set
# CONFIG_AUDIO_DEVICES is not set
# CONFIG_BCH is not set
# CONFIG_INPUT is not set
# CONFIG_LCD is not set
# CONFIG_MMCSD is not set
# CONFIG_MTD is not set
CONFIG_PIPES=y
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
CONFIG_SERIAL=y
# CONFIG_DEV_LOWCONSOLE is not set
CONFIG_SERIAL_REMOVABLE=y
# CONFIG_16550_UART is not set
CONFIG_ARCH_HAVE_USART2=y
CONFIG_MCU_SERIAL=y
CONFIG_STANDARD_SERIAL=y
CONFIG_SERIAL_NPOLLWAITERS=2
CONFIG_USART2_SERIAL_CONSOLE=y
# CONFIG_NO_SERIAL_CONSOLE is not set
#
# USART2 Configuration
#
CONFIG_USART2_RXBUFSIZE=512
CONFIG_USART2_TXBUFSIZE=512
CONFIG_USART2_BAUD=57600
CONFIG_USART2_BITS=8
CONFIG_USART2_PARITY=0
CONFIG_USART2_2STOP=0
# CONFIG_USART2_IFLOWCONTROL is not set
# CONFIG_USART2_OFLOWCONTROL is not set
# CONFIG_SERIAL_IFLOWCONTROL is not set
# CONFIG_SERIAL_OFLOWCONTROL is not set
CONFIG_USBDEV=y
#
# USB Device Controller Driver Options
#
# CONFIG_USBDEV_ISOCHRONOUS is not set
# CONFIG_USBDEV_DUALSPEED is not set
# CONFIG_USBDEV_SELFPOWERED is not set
CONFIG_USBDEV_BUSPOWERED=y
CONFIG_USBDEV_MAXPOWER=500
# CONFIG_USBDEV_DMA is not set
# CONFIG_USBDEV_TRACE is not set
#
# USB Device Class Driver Options
#
# CONFIG_USBDEV_COMPOSITE is not set
# CONFIG_PL2303 is not set
CONFIG_CDCACM=y
# CONFIG_CDCACM_CONSOLE is not set
CONFIG_CDCACM_EP0MAXPACKET=64
CONFIG_CDCACM_EPINTIN=1
CONFIG_CDCACM_EPINTIN_FSSIZE=64
CONFIG_CDCACM_EPINTIN_HSSIZE=64
CONFIG_CDCACM_EPBULKOUT=3
CONFIG_CDCACM_EPBULKOUT_FSSIZE=64
CONFIG_CDCACM_EPBULKOUT_HSSIZE=512
CONFIG_CDCACM_EPBULKIN=2
CONFIG_CDCACM_EPBULKIN_FSSIZE=64
CONFIG_CDCACM_EPBULKIN_HSSIZE=512
CONFIG_CDCACM_NWRREQS=4
CONFIG_CDCACM_NRDREQS=4
CONFIG_CDCACM_BULKIN_REQLEN=96
CONFIG_CDCACM_RXBUFSIZE=512
CONFIG_CDCACM_TXBUFSIZE=2048
CONFIG_CDCACM_VENDORID=0x26ac
CONFIG_CDCACM_PRODUCTID=0x0011
CONFIG_CDCACM_VENDORSTR="3D Robotics"
CONFIG_CDCACM_PRODUCTSTR="PX4 FMU v2.x"
# CONFIG_USBMSC is not set
# CONFIG_USBHOST is not set
# CONFIG_WIRELESS is not set
#
# System Logging Device Options
#
#
# System Logging
#
# CONFIG_RAMLOG is not set
#
# Networking Support
#
# CONFIG_NET is not set
#
# File Systems
#
#
# File system configuration
#
# CONFIG_DISABLE_MOUNTPOINT is not set
# CONFIG_FS_RAMMAP is not set
CONFIG_FS_FAT=y
# CONFIG_FAT_LCNAMES is not set
# CONFIG_FAT_LFN is not set
# CONFIG_FS_FATTIME is not set
# CONFIG_FAT_DMAMEMORY is not set
CONFIG_FS_NXFFS=y
CONFIG_NXFFS_PREALLOCATED=y
CONFIG_NXFFS_ERASEDSTATE=0xff
CONFIG_NXFFS_PACKTHRESHOLD=32
CONFIG_NXFFS_MAXNAMLEN=32
CONFIG_NXFFS_TAILTHRESHOLD=2048
CONFIG_FS_ROMFS=y
# CONFIG_FS_SMARTFS is not set
CONFIG_FS_BINFS=y
#
# System Logging
#
# CONFIG_SYSLOG_ENABLE is not set
# CONFIG_SYSLOG is not set
#
# Graphics Support
#
# CONFIG_NX is not set
#
# Memory Management
#
# CONFIG_MM_MULTIHEAP is not set
# CONFIG_MM_SMALL is not set
CONFIG_MM_REGIONS=2
CONFIG_GRAN=y
# CONFIG_GRAN_SINGLE is not set
# CONFIG_GRAN_INTR is not set
#
# Audio Support
#
# CONFIG_AUDIO is not set
#
# Binary Formats
#
# CONFIG_BINFMT_DISABLE is not set
# CONFIG_BINFMT_EXEPATH is not set
# CONFIG_NXFLAT is not set
# CONFIG_ELF is not set
CONFIG_BUILTIN=y
# CONFIG_PIC is not set
# CONFIG_SYMTAB_ORDEREDBYNAME is not set
#
# Library Routines
#
#
# Standard C Library Options
#
CONFIG_STDIO_BUFFER_SIZE=32
CONFIG_STDIO_LINEBUFFER=y
CONFIG_NUNGET_CHARS=2
CONFIG_LIB_HOMEDIR="/"
# CONFIG_NOPRINTF_FIELDWIDTH is not set
CONFIG_LIBC_FLOATINGPOINT=y
CONFIG_LIB_RAND_ORDER=1
# CONFIG_EOL_IS_CR is not set
# CONFIG_EOL_IS_LF is not set
# CONFIG_EOL_IS_BOTH_CRLF is not set
CONFIG_EOL_IS_EITHER_CRLF=y
# CONFIG_LIBC_EXECFUNCS is not set
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
CONFIG_LIBC_STRERROR=y
# CONFIG_LIBC_STRERROR_SHORT is not set
# CONFIG_LIBC_PERROR_STDOUT is not set
CONFIG_ARCH_LOWPUTC=y
CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_ROMGETC is not set
CONFIG_ARCH_OPTIMIZED_FUNCTIONS=y
CONFIG_ARCH_MEMCPY=y
# CONFIG_ARCH_MEMCMP is not set
# CONFIG_ARCH_MEMMOVE is not set
# CONFIG_ARCH_MEMSET is not set
# CONFIG_MEMSET_OPTSPEED is not set
# CONFIG_ARCH_STRCHR is not set
# CONFIG_ARCH_STRCMP is not set
# CONFIG_ARCH_STRCPY is not set
# CONFIG_ARCH_STRNCPY is not set
# CONFIG_ARCH_STRLEN is not set
# CONFIG_ARCH_STRNLEN is not set
# CONFIG_ARCH_BZERO is not set
#
# Non-standard Library Support
#
CONFIG_SCHED_WORKQUEUE=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_WORKPRIORITY=192
CONFIG_SCHED_WORKPERIOD=5000
CONFIG_SCHED_WORKSTACKSIZE=4000
CONFIG_SCHED_LPWORK=y
CONFIG_SCHED_LPWORKPRIORITY=50
CONFIG_SCHED_LPWORKPERIOD=50000
CONFIG_SCHED_LPWORKSTACKSIZE=4000
# CONFIG_LIB_KBDCODEC is not set
# CONFIG_LIB_SLCDCODEC is not set
#
# Basic CXX Support
#
CONFIG_C99_BOOL8=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
# CONFIG_CXX_NEWLONG is not set
#
# uClibc++ Standard C++ Library
#
# CONFIG_UCLIBCXX is not set
#
# Application Configuration
#
#
# Built-In Applications
#
CONFIG_BUILTIN_PROXY_STACKSIZE=1024
#
# Examples
#
# CONFIG_EXAMPLES_BUTTONS is not set
# CONFIG_EXAMPLES_CAN is not set
CONFIG_EXAMPLES_CDCACM=y
# CONFIG_EXAMPLES_COMPOSITE is not set
# CONFIG_EXAMPLES_CXXTEST is not set
# CONFIG_EXAMPLES_DHCPD is not set
# CONFIG_EXAMPLES_ELF is not set
# CONFIG_EXAMPLES_FTPC is not set
# CONFIG_EXAMPLES_FTPD is not set
# CONFIG_EXAMPLES_HELLO is not set
# CONFIG_EXAMPLES_HELLOXX is not set
# CONFIG_EXAMPLES_JSON is not set
# CONFIG_EXAMPLES_HIDKBD is not set
# CONFIG_EXAMPLES_KEYPADTEST is not set
# CONFIG_EXAMPLES_IGMP is not set
# CONFIG_EXAMPLES_LCDRW is not set
# CONFIG_EXAMPLES_MM is not set
# CONFIG_EXAMPLES_MODBUS is not set
CONFIG_EXAMPLES_MOUNT=y
# CONFIG_EXAMPLES_NRF24L01TERM is not set
CONFIG_EXAMPLES_NSH=y
# CONFIG_EXAMPLES_NULL is not set
# CONFIG_EXAMPLES_NX is not set
# CONFIG_EXAMPLES_NXCONSOLE is not set
# CONFIG_EXAMPLES_NXFFS is not set
# CONFIG_EXAMPLES_NXFLAT is not set
# CONFIG_EXAMPLES_NXHELLO is not set
# CONFIG_EXAMPLES_NXIMAGE is not set
# CONFIG_EXAMPLES_NXLINES is not set
# CONFIG_EXAMPLES_NXTEXT is not set
# CONFIG_EXAMPLES_OSTEST is not set
# CONFIG_EXAMPLES_PASHELLO is not set
# CONFIG_EXAMPLES_PIPE is not set
# CONFIG_EXAMPLES_POSIXSPAWN is not set
# CONFIG_EXAMPLES_QENCODER is not set
# CONFIG_EXAMPLES_RGMP is not set
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_SLCD is not set
# CONFIG_EXAMPLES_SMART_TEST is not set
# CONFIG_EXAMPLES_SMART is not set
# CONFIG_EXAMPLES_TCPECHO is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
# CONFIG_EXAMPLES_UDP is not set
# CONFIG_EXAMPLES_UIP is not set
# CONFIG_EXAMPLES_USBSERIAL is not set
# CONFIG_EXAMPLES_USBMSC is not set
# CONFIG_EXAMPLES_USBTERM is not set
# CONFIG_EXAMPLES_WATCHDOG is not set
#
# Graphics Support
#
# CONFIG_TIFF is not set
#
# Interpreters
#
# CONFIG_INTERPRETERS_FICL is not set
# CONFIG_INTERPRETERS_PCODE is not set
#
# Network Utilities
#
#
# Networking Utilities
#
# CONFIG_NETUTILS_CODECS is not set
# CONFIG_NETUTILS_DHCPC is not set
# CONFIG_NETUTILS_DHCPD is not set
# CONFIG_NETUTILS_FTPC is not set
# CONFIG_NETUTILS_FTPD is not set
# CONFIG_NETUTILS_JSON is not set
# CONFIG_NETUTILS_RESOLV is not set
# CONFIG_NETUTILS_SMTP is not set
# CONFIG_NETUTILS_TELNETD is not set
# CONFIG_NETUTILS_TFTPC is not set
# CONFIG_NETUTILS_THTTPD is not set
# CONFIG_NETUTILS_UIPLIB is not set
# CONFIG_NETUTILS_WEBCLIENT is not set
#
# FreeModBus
#
# CONFIG_MODBUS is not set
#
# NSH Library
#
CONFIG_NSH_LIBRARY=y
CONFIG_NSH_BUILTIN_APPS=y
#
# Disable Individual commands
#
# CONFIG_NSH_DISABLE_CAT is not set
# CONFIG_NSH_DISABLE_CD is not set
# CONFIG_NSH_DISABLE_CP is not set
# CONFIG_NSH_DISABLE_DD is not set
# CONFIG_NSH_DISABLE_ECHO is not set
# CONFIG_NSH_DISABLE_EXEC is not set
# CONFIG_NSH_DISABLE_EXIT is not set
# CONFIG_NSH_DISABLE_FREE is not set
# CONFIG_NSH_DISABLE_GET is not set
# CONFIG_NSH_DISABLE_HELP is not set
# CONFIG_NSH_DISABLE_HEXDUMP is not set
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_KILL is not set
# CONFIG_NSH_DISABLE_LOSETUP is not set
# CONFIG_NSH_DISABLE_LS is not set
# CONFIG_NSH_DISABLE_MB is not set
# CONFIG_NSH_DISABLE_MKDIR is not set
# CONFIG_NSH_DISABLE_MKFATFS is not set
# CONFIG_NSH_DISABLE_MKFIFO is not set
# CONFIG_NSH_DISABLE_MKRD is not set
# CONFIG_NSH_DISABLE_MH is not set
# CONFIG_NSH_DISABLE_MOUNT is not set
# CONFIG_NSH_DISABLE_MW is not set
# CONFIG_NSH_DISABLE_NSFMOUNT is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_NSH_DISABLE_PING is not set
# CONFIG_NSH_DISABLE_PUT is not set
# CONFIG_NSH_DISABLE_PWD is not set
# CONFIG_NSH_DISABLE_RM is not set
# CONFIG_NSH_DISABLE_RMDIR is not set
# CONFIG_NSH_DISABLE_SET is not set
# CONFIG_NSH_DISABLE_SH is not set
# CONFIG_NSH_DISABLE_SLEEP is not set
# CONFIG_NSH_DISABLE_TEST is not set
# CONFIG_NSH_DISABLE_UMOUNT is not set
# CONFIG_NSH_DISABLE_UNSET is not set
# CONFIG_NSH_DISABLE_USLEEP is not set
# CONFIG_NSH_DISABLE_WGET is not set
# CONFIG_NSH_DISABLE_XD is not set
#
# Configure Command Options
#
# CONFIG_NSH_CMDOPT_DF_H is not set
CONFIG_NSH_CODECS_BUFSIZE=128
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_STRERROR=y
CONFIG_NSH_LINELEN=128
CONFIG_NSH_MAXARGUMENTS=12
CONFIG_NSH_NESTDEPTH=8
# CONFIG_NSH_DISABLESCRIPT is not set
# CONFIG_NSH_DISABLEBG is not set
CONFIG_NSH_ROMFSETC=y
# CONFIG_NSH_ROMFSRC is not set
CONFIG_NSH_ROMFSMOUNTPT="/etc"
CONFIG_NSH_INITSCRIPT="init.d/rcS"
CONFIG_NSH_ROMFSDEVNO=0
CONFIG_NSH_ROMFSSECTSIZE=128
CONFIG_NSH_ARCHROMFS=y
CONFIG_NSH_FATDEVNO=0
CONFIG_NSH_FATSECTSIZE=512
CONFIG_NSH_FATNSECTORS=1024
CONFIG_NSH_FATMOUNTPT="/tmp"
CONFIG_NSH_CONSOLE=y
# CONFIG_NSH_USBCONSOLE is not set
#
# USB Trace Support
#
# CONFIG_NSH_CONDEV is not set
CONFIG_NSH_ARCHINIT=y
#
# NxWidgets/NxWM
#
#
# System NSH Add-Ons
#
#
# Custom Free Memory Command
#
# CONFIG_SYSTEM_FREE is not set
#
# I2C tool
#
# CONFIG_SYSTEM_I2CTOOL is not set
#
# FLASH Program Installation
#
# CONFIG_SYSTEM_INSTALL is not set
#
# FLASH Erase-all Command
#
#
# readline()
#
CONFIG_SYSTEM_READLINE=y
CONFIG_READLINE_ECHO=y
#
# Power Off
#
# CONFIG_SYSTEM_POWEROFF is not set
#
# RAMTRON
#
# CONFIG_SYSTEM_RAMTRON is not set
#
# SD Card
#
# CONFIG_SYSTEM_SDCARD is not set
#
# Sysinfo
#
CONFIG_SYSTEM_SYSINFO=y
#
# USB Monitor
#

View File

@ -0,0 +1,67 @@
#!/bin/bash
# configs/stm3240g-eval/nsh/setenv.sh
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# This the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

View File

@ -0,0 +1,149 @@
/****************************************************************************
* configs/px4fmu-v1/scripts/ld.script
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F40VGG has 1024Kb of FLASH beginning at address 0x0800:0000 and
* 192Kb of SRAM. SRAM is split up into three blocks:
*
* 1) 112Kb of SRAM beginning at address 0x2000:0000
* 2) 16Kb of SRAM beginning at address 0x2001:c000
* 3) 64Kb of CCM SRAM beginning at address 0x1000:0000
*
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
* where the code expects to begin execution by jumping to the entry point in
* the 0x0800:0000 address range.
*
* The first 0x4000 of flash is reserved for the bootloader.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08004000, LENGTH = 1008K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 128K
ccsram (rwx) : ORIGIN = 0x10000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(__start) /* treat __start as the anchor for dead code stripping */
EXTERN(_vectors) /* force the vectors to be included in the output */
/*
* Ensure that abort() is present in the final object. The exception handling
* code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
*/
EXTERN(abort)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
/*
* This is a hack to make the newlib libm __errno() call
* use the NuttX get_errno_ptr() function.
*/
__errno = get_errno_ptr;
} > flash
/*
* Init functions (static constructors and the like)
*/
.init_section : {
_sinit = ABSOLUTE(.);
KEEP(*(.init_array .init_array.*))
_einit = ABSOLUTE(.);
} > flash
/*
* Construction data for parameters.
*/
__param ALIGN(4): {
__param_start = ABSOLUTE(.);
KEEP(*(__param*))
__param_end = ABSOLUTE(.);
} > flash
.ARM.extab : {
*(.ARM.extab*)
} > flash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > flash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

View File

@ -0,0 +1,84 @@
############################################################################
# configs/px4fmu/src/Makefile
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
-include $(TOPDIR)/Make.defs
CFLAGS += -I$(TOPDIR)/sched
ASRCS =
AOBJS = $(ASRCS:.S=$(OBJEXT))
CSRCS = empty.c
COBJS = $(CSRCS:.c=$(OBJEXT))
SRCS = $(ASRCS) $(CSRCS)
OBJS = $(AOBJS) $(COBJS)
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
ifeq ($(WINTOOL),y)
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
-I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
else
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
endif
all: libboard$(LIBEXT)
$(AOBJS): %$(OBJEXT): %.S
$(call ASSEMBLE, $<, $@)
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
$(call COMPILE, $<, $@)
libboard$(LIBEXT): $(OBJS)
$(call ARCHIVE, $@, $(OBJS))
.depend: Makefile $(SRCS)
$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
$(Q) touch $@
depend: .depend
clean:
$(call DELFILE, libboard$(LIBEXT))
$(call CLEAN)
distclean: clean
$(call DELFILE, Make.dep)
$(call DELFILE, .depend)
-include Make.dep

View File

@ -0,0 +1,4 @@
/*
* There are no source files here, but libboard.a can't be empty, so
* we have this empty source file to keep it company.
*/

View File

@ -0,0 +1,136 @@
/****************************************************************************
*
* Copyright (c) 2013, 2014 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file board_config.h
*
* PX4-STM32F4Discovery internal definitions
*/
#pragma once
/****************************************************************************************************
* Included Files
****************************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
__BEGIN_DECLS
/* these headers are not C++ safe */
#include <stm32.h>
#include <arch/board/board.h>
#define UDID_START 0x1FFF7A10
/****************************************************************************************************
* Definitions
****************************************************************************************************/
/* Configuration ************************************************************************************/
/* PX4FMU GPIOs ***********************************************************************************/
/* LEDs */
/* LEDs */
#define GPIO_LED1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN12)
#define GPIO_LED2 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN13)
#define GPIO_LED3 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14)
#define GPIO_LED4 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN15)
/* SPI chip selects */
#define GPIO_SPI_CS_MEMS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
/* USB OTG FS
*
* PA9 OTG_FS_VBUS VBUS sensing
*/
#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9)
/* High-resolution timer */
#define HRT_TIMER 8 /* use timer8 for the HRT */
#define HRT_TIMER_CHANNEL 1 /* use capture/compare channel */
/****************************************************************************************************
* Public Types
****************************************************************************************************/
/****************************************************************************************************
* Public data
****************************************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************************************
* Public Functions
****************************************************************************************************/
/****************************************************************************************************
* Name: stm32_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the PX4FMU board.
*
****************************************************************************************************/
extern void stm32_spiinitialize(void);
extern void stm32_usbinitialize(void);
/****************************************************************************
* Name: nsh_archinitialize
*
* Description:
* Perform architecture specific initialization for NSH.
*
* CONFIG_NSH_ARCHINIT=y :
* Called from the NSH library
*
* CONFIG_BOARD_INITIALIZE=y, CONFIG_NSH_LIBRARY=y, &&
* CONFIG_NSH_ARCHINIT=n :
* Called from board_initialize().
*
****************************************************************************/
#ifdef CONFIG_NSH_LIBRARY
int nsh_archinitialize(void);
#endif
#endif /* __ASSEMBLY__ */
__END_DECLS

View File

@ -0,0 +1,7 @@
#
# Board-specific startup code for the PX4-STM32F4Discovery
#
SRCS = px4discovery_init.c \
px4discovery_usb.c \
px4discovery_led.c

View File

@ -0,0 +1,173 @@
/****************************************************************************
*
* Copyright (C) 2012 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file px4discovery_init.c
*
* PX4-stm32f4discovery specific early startup code. This file implements the
* nsh_archinitialize() function that is called early by nsh during startup.
*
* Code here is run before the rcS script is invoked; it should start required
* subsystems and perform board-specific initialisation.
*/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <stdio.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/arch.h>
#include <nuttx/spi.h>
#include <nuttx/i2c.h>
#include <nuttx/sdio.h>
#include <nuttx/mmcsd.h>
#include <nuttx/analog/adc.h>
#include <nuttx/gran.h>
#include <stm32.h>
#include "board_config.h"
#include <stm32_uart.h>
#include <arch/board/board.h>
#include <drivers/drv_hrt.h>
#include <drivers/drv_led.h>
#include <systemlib/cpuload.h>
#include <systemlib/perf_counter.h>
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* Debug ********************************************************************/
#ifdef CONFIG_CPP_HAVE_VARARGS
# ifdef CONFIG_DEBUG
# define message(...) lowsyslog(__VA_ARGS__)
# else
# define message(...) printf(__VA_ARGS__)
# endif
#else
# ifdef CONFIG_DEBUG
# define message lowsyslog
# else
# define message printf
# endif
#endif
/****************************************************************************
* Protected Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/************************************************************************************
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
__EXPORT void
stm32_boardinitialize(void)
{
/* configure LEDs */
up_ledinit();
}
/****************************************************************************
* Name: nsh_archinitialize
*
* Description:
* Perform architecture specific initialization
*
****************************************************************************/
#include <math.h>
#ifdef __cplusplus
__EXPORT int matherr(struct __exception *e)
{
return 1;
}
#else
__EXPORT int matherr(struct exception *e)
{
return 1;
}
#endif
__EXPORT int nsh_archinitialize(void)
{
/* configure the high-resolution time/callout interface */
hrt_init();
/* configure CPU load estimation */
#ifdef CONFIG_SCHED_INSTRUMENTATION
cpuload_initialize_once();
#endif
/* set up the serial DMA polling */
static struct hrt_call serial_dma_call;
struct timespec ts;
/*
* Poll at 1ms intervals for received bytes that have not triggered
* a DMA event.
*/
ts.tv_sec = 0;
ts.tv_nsec = 1000000;
hrt_call_every(&serial_dma_call,
ts_to_abstime(&ts),
ts_to_abstime(&ts),
(hrt_callout)stm32_serial_dma_poll,
NULL);
return OK;
}

View File

@ -0,0 +1,97 @@
/****************************************************************************
*
* Copyright (c) 2013 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file px4discovery_led.c
*
* PX4-stm32f4discovery LED backend.
*/
#include <nuttx/config.h>
#include <stdbool.h>
#include "stm32.h"
#include "board_config.h"
#include <arch/board/board.h>
/*
* Ideally we'd be able to get these from up_internal.h,
* but since we want to be able to disable the NuttX use
* of leds for system indication at will and there is no
* separate switch, we need to build independent of the
* CONFIG_ARCH_LEDS configuration switch.
*/
__BEGIN_DECLS
extern void led_init(void);
extern void led_on(int led);
extern void led_off(int led);
extern void led_toggle(int led);
__END_DECLS
__EXPORT void led_init()
{
/* Configure LED1 GPIO for output */
stm32_configgpio(GPIO_LED1);
}
__EXPORT void led_on(int led)
{
if (led == 1)
{
/* Pull down to switch on */
stm32_gpiowrite(GPIO_LED1, false);
}
}
__EXPORT void led_off(int led)
{
if (led == 1)
{
/* Pull up to switch off */
stm32_gpiowrite(GPIO_LED1, true);
}
}
__EXPORT void led_toggle(int led)
{
if (led == 1)
{
if (stm32_gpioread(GPIO_LED1))
stm32_gpiowrite(GPIO_LED1, false);
else
stm32_gpiowrite(GPIO_LED1, true);
}
}

View File

@ -0,0 +1,108 @@
/****************************************************************************
*
* Copyright (C) 2012 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file px4discovery_usb.c
*
* Board-specific USB functions.
*/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <nuttx/usb/usbdev.h>
#include <nuttx/usb/usbdev_trace.h>
#include <up_arch.h>
#include <stm32.h>
#include "board_config.h"
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_usbinitialize
*
* Description:
* Called to setup USB-related GPIO pins for the PX4-STM32F4Discovery board.
*
************************************************************************************/
__EXPORT void stm32_usbinitialize(void)
{
/* The OTG FS has an internal soft pull-up */
/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
#ifdef CONFIG_STM32_OTGFS
stm32_configgpio(GPIO_OTGFS_VBUS);
/* XXX We only support device mode
stm32_configgpio(GPIO_OTGFS_PWRON);
stm32_configgpio(GPIO_OTGFS_OVER);
*/
#endif
}
/************************************************************************************
* Name: stm32_usbsuspend
*
* Description:
* Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
* used. This function is called whenever the USB enters or leaves suspend mode.
* This is an opportunity for the board logic to shutdown clocks, power, etc.
* while the USB is suspended.
*
************************************************************************************/
__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
{
ulldbg("resume: %d\n", resume);
}

View File

@ -110,9 +110,13 @@
/* no GPIO driver on the PX4IOv2 board */
#endif
#ifdef CONFIG_ARCH_BOARD_PX4_STM32F4DISCOVERY
/* no GPIO driver on the PX4_STM32F4DISCOVERY board */
#endif
#if !defined(CONFIG_ARCH_BOARD_PX4IO_V1) && !defined(CONFIG_ARCH_BOARD_PX4IO_V2) && \
!defined(CONFIG_ARCH_BOARD_PX4FMU_V1) && !defined(CONFIG_ARCH_BOARD_PX4FMU_V2) && \
!defined(CONFIG_ARCH_BOARD_AEROCORE)
!defined(CONFIG_ARCH_BOARD_AEROCORE) && !defined(CONFIG_ARCH_BOARD_PX4_STM32F4DISCOVERY)
# error No CONFIG_ARCH_BOARD_xxxx set
#endif
/*

View File

@ -63,4 +63,8 @@
#define HW_ARCH "AEROCORE"
#endif
#ifdef CONFIG_ARCH_BOARD_PX4_STM32F4DISCOVERY
#define HW_ARCH "PX4_STM32F4DISCOVERY"
#endif
#endif /* VERSION_H_ */

View File

@ -89,10 +89,11 @@
int test_gpio(int argc, char *argv[])
{
int fd;
int ret = 0;
fd = open(PX4IO_DEVICE_PATH, 0);
#ifdef PX4IO_DEVICE_PATH
int fd = open(PX4IO_DEVICE_PATH, 0);
if (fd < 0) {
printf("GPIO: open fail\n");
@ -109,7 +110,11 @@ int test_gpio(int argc, char *argv[])
/* Go back to default */
ioctl(fd, GPIO_RESET, ~0);
close(fd);
printf("\t GPIO test successful.\n");
#endif
return ret;
}