Merge commit 'de749a3602423f5ee6ca56f3cf2dfff04e31ec6d' (kconfig-cleanup) into fmuv2_bringup

Makefile

@@ -151,7 +151,7 @@ $(NUTTX_ARCHIVES): $(ARCHIVE_DIR)%.export: $(NUTTX_SRC)
 	$(Q) (cd $(NUTTX_SRC)/configs && $(COPYDIR) $(PX4_BASE)nuttx-configs/$(board) .)
 	$(Q) (cd $(NUTTX_SRC)tools && ./configure.sh $(board)/$(configuration))
 	@$(ECHO) %% Exporting NuttX for $(board)
-	$(Q) make -r -j1 -C $(NUTTX_SRC) -r $(MQUIET) export
+	$(Q) make -r -j1 -C $(NUTTX_SRC) -r $(MQUIET) CONFIG_ARCH_BOARD=$(board) export
 	$(Q) mkdir -p $(dir $@)
 	$(Q) $(COPY) $(NUTTX_SRC)nuttx-export.zip $@
 	$(Q) (cd $(NUTTX_SRC)/configs && $(RMDIR) $(board))

makefiles/board_px4fmu-v1.mk

@@ -6,5 +6,6 @@
 # Configure the toolchain
 #
 CONFIG_ARCH			 = CORTEXM4F
+CONFIG_BOARD			 = PX4FMU_V1
 
 include $(PX4_MK_DIR)/toolchain_gnu-arm-eabi.mk

makefiles/board_px4fmu-v2.mk

@@ -6,5 +6,6 @@
 # Configure the toolchain
 #
 CONFIG_ARCH			 = CORTEXM4F
+CONFIG_BOARD			 = PX4FMU_V2
 
 include $(PX4_MK_DIR)/toolchain_gnu-arm-eabi.mk

makefiles/board_px4io-v1.mk

@@ -6,5 +6,6 @@
 # Configure the toolchain
 #
 CONFIG_ARCH			 = CORTEXM3
+CONFIG_BOARD			 = PX4IO_V1
 
 include $(PX4_MK_DIR)/toolchain_gnu-arm-eabi.mk

makefiles/board_px4io-v2.mk

@@ -6,5 +6,6 @@
 # Configure the toolchain
 #
 CONFIG_ARCH			 = CORTEXM3
+CONFIG_BOARD			 = PX4IO_V2
 
 include $(PX4_MK_DIR)/toolchain_gnu-arm-eabi.mk

makefiles/firmware.mk

@@ -153,6 +153,7 @@ ifeq ($(BOARD_FILE),)
 $(error Config $(CONFIG) references board $(BOARD), but no board definition file found)
 endif
 export BOARD
+export BOARD_FILE
 include $(BOARD_FILE)
 $(info %  BOARD               = $(BOARD))
 

makefiles/module.mk

@@ -98,6 +98,7 @@
 #
 # CONFIG
 # BOARD
+# BOARD_FILE
 # MODULE_WORK_DIR
 # MODULE_OBJ
 # MODULE_MK
@@ -117,7 +118,7 @@ $(info %% MODULE_MK           = $(MODULE_MK))
 #
 # Get the board/toolchain config
 #
-include $(PX4_MK_DIR)/board_$(BOARD).mk
+include $(BOARD_FILE)
 
 #
 # Get the module's config

makefiles/toolchain_gnu-arm-eabi.mk

@@ -85,6 +85,13 @@ ifeq ($(ARCHCPUFLAGS),)
 $(error Must set CONFIG_ARCH to one of CORTEXM4F, CORTEXM4 or CORTEXM3)
 endif
 
+# Set the board flags
+#
+ifeq ($(CONFIG_BOARD),)
+$(error Board config does not define CONFIG_BOARD)
+endif
+ARCHDEFINES		+= -DCONFIG_ARCH_BOARD_$(CONFIG_BOARD)
+
 # optimisation flags
 #
 ARCHOPTIMIZATION	 = $(MAXOPTIMIZATION) \

nuttx-configs/px4fmu-v1/nsh/defconfig

@@ -73,17 +73,16 @@ CONFIG_ARCH="arm"
 # CONFIG_ARCH_CHIP_LPC31XX is not set
 # CONFIG_ARCH_CHIP_LPC43XX is not set
 # CONFIG_ARCH_CHIP_NUC1XX is not set
-# CONFIG_ARCH_CHIP_SAM3U is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
 CONFIG_ARCH_CHIP_STM32=y
 # CONFIG_ARCH_CHIP_STR71X is not set
 CONFIG_ARCH_CORTEXM4=y
-CONFIG_ARCH_HAVE_FPU=y
 CONFIG_ARCH_FAMILY="armv7-m"
 CONFIG_ARCH_CHIP="stm32"
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_ARCH_HAVE_CMNVECTOR=y
 CONFIG_ARMV7M_CMNVECTOR=y
-CONFIG_ARMV7M_STACKCHECK=y
+CONFIG_ARCH_HAVE_FPU=y
 CONFIG_ARCH_FPU=y
 CONFIG_ARCH_HAVE_MPU=y
 # CONFIG_ARMV7M_MPU is not set
@@ -93,10 +92,8 @@ CONFIG_ARCH_HAVE_MPU=y
 #
 # CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
 CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
+CONFIG_ARMV7M_STACKCHECK=y
 CONFIG_SERIAL_TERMIOS=y
-CONFIG_SERIAL_DISABLE_REORDERING=y
-CONFIG_SERIAL_IFLOWCONTROL=y
-CONFIG_SERIAL_OFLOWCONTROL=y
 
 #
 # STM32 Configuration Options
@@ -248,6 +245,7 @@ CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
 # CONFIG_STM32_FORCEPOWER is not set
 # CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
 # CONFIG_STM32_CCMEXCLUDE is not set
+CONFIG_STM32_DMACAPABLE=y
 # CONFIG_STM32_TIM4_PWM is not set
 # CONFIG_STM32_TIM5_PWM is not set
 # CONFIG_STM32_TIM9_PWM is not set
@@ -275,6 +273,7 @@ CONFIG_UART5_RXDMA=y
 CONFIG_USART6_RXDMA=y
 # CONFIG_USART7_RXDMA is not set
 # CONFIG_USART8_RXDMA is not set
+CONFIG_SERIAL_DISABLE_REORDERING=y
 CONFIG_STM32_USART_SINGLEWIRE=y
 
 #
@@ -342,15 +341,12 @@ CONFIG_BOOT_RUNFROMFLASH=y
 #
 # Board Selection
 #
-CONFIG_ARCH_BOARD_PX4FMU_V1=y
+CONFIG_ARCH_BOARD_CUSTOM=y
-# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD=""
-CONFIG_ARCH_BOARD="px4fmu-v1"
 
 #
 # Common Board Options
 #
-CONFIG_ARCH_HAVE_LEDS=y
-# CONFIG_ARCH_LEDS is not set
 CONFIG_NSH_MMCSDMINOR=0
 CONFIG_NSH_MMCSDSLOTNO=0
 CONFIG_NSH_MMCSDSPIPORTNO=3
@@ -358,8 +354,6 @@ CONFIG_NSH_MMCSDSPIPORTNO=3
 #
 # Board-Specific Options
 #
-CONFIG_HRT_TIMER=y
-CONFIG_HRT_PPM=y
 
 #
 # RTOS Features
@@ -497,6 +491,8 @@ CONFIG_USART1_BAUD=57600
 CONFIG_USART1_BITS=8
 CONFIG_USART1_PARITY=0
 CONFIG_USART1_2STOP=0
+# CONFIG_USART1_IFLOWCONTROL is not set
+# CONFIG_USART1_OFLOWCONTROL is not set
 
 #
 # USART2 Configuration
@@ -507,6 +503,8 @@ CONFIG_USART2_BAUD=57600
 CONFIG_USART2_BITS=8
 CONFIG_USART2_PARITY=0
 CONFIG_USART2_2STOP=0
+CONFIG_USART2_IFLOWCONTROL=y
+CONFIG_USART2_OFLOWCONTROL=y
 
 #
 # UART5 Configuration
@@ -517,6 +515,8 @@ CONFIG_UART5_BAUD=57600
 CONFIG_UART5_BITS=8
 CONFIG_UART5_PARITY=0
 CONFIG_UART5_2STOP=0
+# CONFIG_UART5_IFLOWCONTROL is not set
+# CONFIG_UART5_OFLOWCONTROL is not set
 
 #
 # USART6 Configuration
@@ -527,6 +527,10 @@ CONFIG_USART6_BAUD=57600
 CONFIG_USART6_BITS=8
 CONFIG_USART6_PARITY=0
 CONFIG_USART6_2STOP=0
+# CONFIG_USART6_IFLOWCONTROL is not set
+# CONFIG_USART6_OFLOWCONTROL is not set
+CONFIG_SERIAL_IFLOWCONTROL=y
+CONFIG_SERIAL_OFLOWCONTROL=y
 CONFIG_USBDEV=y
 
 #
@@ -534,10 +538,9 @@ CONFIG_USBDEV=y
 #
 # CONFIG_USBDEV_ISOCHRONOUS is not set
 # CONFIG_USBDEV_DUALSPEED is not set
-# CONFIG_USBDEV_SELFPOWERED is not set
+CONFIG_USBDEV_SELFPOWERED=y
-CONFIG_USBDEV_BUSPOWERED=y
+# CONFIG_USBDEV_BUSPOWERED is not set
 CONFIG_USBDEV_MAXPOWER=500
-# CONFIG_USBDEV_REMOTEWAKEUP is not set
 # CONFIG_USBDEV_DMA is not set
 # CONFIG_USBDEV_TRACE is not set
 
@@ -560,8 +563,9 @@ CONFIG_CDCACM_EPBULKIN_FSSIZE=64
 CONFIG_CDCACM_EPBULKIN_HSSIZE=512
 CONFIG_CDCACM_NWRREQS=4
 CONFIG_CDCACM_NRDREQS=4
-CONFIG_CDCACM_RXBUFSIZE=512
+CONFIG_CDCACM_BULKIN_REQLEN=96
-CONFIG_CDCACM_TXBUFSIZE=512
+CONFIG_CDCACM_RXBUFSIZE=256
+CONFIG_CDCACM_TXBUFSIZE=256
 CONFIG_CDCACM_VENDORID=0x26ac
 CONFIG_CDCACM_PRODUCTID=0x0010
 CONFIG_CDCACM_VENDORSTR="3D Robotics"
@@ -748,6 +752,7 @@ CONFIG_EXAMPLES_CDCACM=y
 # CONFIG_EXAMPLES_MM is not set
 # CONFIG_EXAMPLES_MODBUS is not set
 CONFIG_EXAMPLES_MOUNT=y
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
 CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_NULL is not set
 # CONFIG_EXAMPLES_NX is not set

nuttx-configs/px4io-v1/nsh/defconfig

@@ -200,28 +200,6 @@ SERIAL_HAVE_CONSOLE_DMA=y
 CONFIG_USART2_RXDMA=n
 CONFIG_USART3_RXDMA=y
 
-#
-# PX4IO specific driver settings
-#
-# CONFIG_HRT_TIMER
-#   Enables the high-resolution timer.  The board definition must
-#   set HRT_TIMER and HRT_TIMER_CHANNEL to the timer and capture/
-#   compare channels to be used.
-# CONFIG_HRT_PPM
-#   Enables R/C PPM input using the HRT.  The board definition must
-#   set HRT_PPM_CHANNEL to the timer capture/compare channel to be
-#   used, and define GPIO_PPM_IN to configure the appropriate timer
-#   GPIO.
-# CONFIG_PWM_SERVO
-#   Enables the PWM servo driver.  The driver configuration must be
-#   supplied by the board support at initialisation time.
-#   Note that USART2 must be disabled on the PX4 board for this to
-#   be available.
-#
-#
-CONFIG_HRT_TIMER=y
-CONFIG_HRT_PPM=y
-
 #
 # General build options
 #

src/drivers/stm32/drv_hrt.c

@@ -59,7 +59,7 @@
 #include <errno.h>
 #include <string.h>
 
-#include <board_config.h>
+#include <arch/board/board.h>
 #include <drivers/drv_hrt.h>
 
 #include "chip.h"
@@ -70,6 +70,8 @@
 #include "stm32_gpio.h"
 #include "stm32_tim.h"
 
+#ifdef HRT_TIMER
+
 /* HRT configuration */
 #if   HRT_TIMER == 1
 # define HRT_TIMER_BASE		STM32_TIM1_BASE
@@ -153,7 +155,7 @@
 #  error must not set CONFIG_STM32_TIM11=y and HRT_TIMER=11
 # endif
 #else
-# error HRT_TIMER must be set in board.h if CONFIG_HRT_TIMER=y
+# error HRT_TIMER must be a value between 1 and 11
 #endif
 
 /*
@@ -324,7 +326,7 @@ static void		hrt_call_invoke(void);
 #  define CCER_PPM	(GTIM_CCER_CC4E | GTIM_CCER_CC4P | GTIM_CCER_CC4NP) /* CC4, both edges */
 #  define CCER_PPM_FLIP	GTIM_CCER_CC4P
 # else
-#  error HRT_PPM_CHANNEL must be a value between 1 and 4 if CONFIG_HRT_PPM is set
+#  error HRT_PPM_CHANNEL must be a value between 1 and 4
 # endif
 
 /*
@@ -422,7 +424,7 @@ hrt_tim_init(void)
 	up_enable_irq(HRT_TIMER_VECTOR);
 }
 
-#ifdef CONFIG_HRT_PPM
+#ifdef HRT_PPM_CHANNEL
 /*
  * Handle the PPM decoder state machine.
  */
@@ -524,7 +526,7 @@ error:
 	ppm_decoded_channels = 0;
 
 }
-#endif /* CONFIG_HRT_PPM */
+#endif /* HRT_PPM_CHANNEL */
 
 /*
  * Handle the compare interupt by calling the callout dispatcher
@@ -544,7 +546,7 @@ hrt_tim_isr(int irq, void *context)
 	/* ack the interrupts we just read */
 	rSR = ~status;
 
-#ifdef CONFIG_HRT_PPM
+#ifdef HRT_PPM_CHANNEL
 
 	/* was this a PPM edge? */
 	if (status & (SR_INT_PPM | SR_OVF_PPM)) {
@@ -684,7 +686,7 @@ hrt_init(void)
 	sq_init(&callout_queue);
 	hrt_tim_init();
 
-#ifdef CONFIG_HRT_PPM
+#ifdef HRT_PPM_CHANNEL
 	/* configure the PPM input pin */
 	stm32_configgpio(GPIO_PPM_IN);
 #endif
@@ -903,3 +905,6 @@ hrt_latency_update(void)
 	/* catch-all at the end */
 	latency_counters[index]++;
 }
+
+
+#endif /* HRT_TIMER */

src/systemcmds/tests/test_hrt.c

@@ -94,7 +94,7 @@ extern uint16_t ppm_pulse_history[];
 
 int test_ppm(int argc, char *argv[])
 {
-#ifdef CONFIG_HRT_PPM
+#ifdef HRT_PPM_CHANNEL
 	unsigned i;
 
 	printf("channels: %u\n", ppm_decoded_channels);