px4-firmware/nuttx/configs/olimex-strp711/scripts/oocd-reset

42 lines
1.3 KiB
Plaintext
Raw Normal View History

#
# The following command wills be executed on
# reset (because of run_and_init in the config-file)
# - wait for target halt
# - erase memory
# - flash content of file main.bin into target-memory
# - shutdown openocd
#
# created by Martin Thomas 8/2007
# http://www.siwawi.arubi.uni-kl.de/avr_projects/arm_projects
# based on information from Dominic Rath
#
arm7_9 dcc_downloads enable
wait_halt
sleep 10
poll
flash probe 0
# STR710FZ2 erase all banks:
#flash erase 0 0 9
# STR710FZ2 erase first 5 banks (0-4)
flash erase 0 0 4
# if flash earse is not available in your OpenOCD-version use
# flash erase_sector but also read the documentation on
# flash auto_erase which can be used together with flash write_image
flash write 0 main.bin 0x0
# flash write may not be available in your OpenOCD-version
# alternative: flash write_binary (flash write_binary <bank-num> <file> <offset>)
# flash write_binary 0 main.bin 0x0
# flash write_binary may not be available in your OpenOCD-version
# alternatives: flash write_bank or flash write_image
# syntax: flash write_image <file> [offset] [type] where type can
# be ihex, bin, elf or s19
# flash write_bank flash-bank bin-filename offset
# i.e. flash write_bank 0 main.bin 0x0
reset run
sleep 10
shutdown