2012-09-17 15:18:44 -03:00
|
|
|
|
README
|
|
|
|
|
|
^^^^^^
|
|
|
|
|
|
|
|
|
|
|
|
README for NuttX port to the Stellaris EKK-LM3S9B96 Evaluation Kit
|
|
|
|
|
|
|
|
|
|
|
|
Contents
|
|
|
|
|
|
^^^^^^^^
|
|
|
|
|
|
|
|
|
|
|
|
Stellaris EKK-LM3S9B96 Evaluation Kit
|
|
|
|
|
|
Development Environment
|
|
|
|
|
|
GNU Toolchain Options
|
|
|
|
|
|
IDEs
|
|
|
|
|
|
NuttX buildroot Toolchain
|
|
|
|
|
|
Stellaris EKK-LM3S9B96 Evaluation Kit Configuration Options
|
|
|
|
|
|
Configurations
|
|
|
|
|
|
|
|
|
|
|
|
Stellaris EKK-LM3S9B96 Evaluation Kit
|
|
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
|
|
|
|
The EKK-LM3S9B96 evaluation kit provides the following features:
|
|
|
|
|
|
|
|
|
|
|
|
o LM3S9B96 high-performance Stellaris microcontroller and large memory
|
|
|
|
|
|
<20> 32-bit ARM<52> Cortex<65>-M3 core
|
|
|
|
|
|
<20> 256 KB single-cycle Flash memory, 96 KB single-cycle SRAM, 23.7 KB single-cycle ROM
|
|
|
|
|
|
o Ethernet 10/100 port with two LED indicators
|
|
|
|
|
|
o USB 2.0 Full-Speed OTG port
|
|
|
|
|
|
o SAFERTOS<4F> operating system in microcontroller ROM
|
|
|
|
|
|
o Virtual serial communications port capability
|
|
|
|
|
|
o Oversized board pads for GPIO access
|
|
|
|
|
|
o User pushbutton and LED
|
|
|
|
|
|
o Detachable ICDI board can be used for debugging other Luminary Micro boards
|
|
|
|
|
|
o Easy to customize
|
|
|
|
|
|
|
|
|
|
|
|
Features of the LM3S9B96 Microcontroller
|
|
|
|
|
|
|
|
|
|
|
|
o ARM<52> Cortex<65>-M3 architecture
|
|
|
|
|
|
<20> 80-MHz operation
|
|
|
|
|
|
<20> ARM Cortex SysTick Timer
|
|
|
|
|
|
<20> Integrated Nested Vectored Interrupt Controller (NVIC)
|
|
|
|
|
|
o External Peripheral Interface (EPI)
|
|
|
|
|
|
o 256 KB single-cycle flash
|
|
|
|
|
|
o 96 KB single-cycle SRAM
|
|
|
|
|
|
o Four general-purpose 32-bit timers
|
|
|
|
|
|
o Integrated Ethernet MAC and PHY
|
|
|
|
|
|
o Three fully programmable 16C550-type UARTs
|
|
|
|
|
|
o Two 10-bit channels (inputs) when used as single-ended inputs
|
|
|
|
|
|
o Three independent integrated analog comparators
|
|
|
|
|
|
o Two CAN modules
|
|
|
|
|
|
o Two I2C modules
|
|
|
|
|
|
o Two SSI modules
|
|
|
|
|
|
o Two Watchdog Timers (32-bit)
|
|
|
|
|
|
o Three PWM generator blocks
|
|
|
|
|
|
<20> One 16-bit counter
|
|
|
|
|
|
<20> Two comparators
|
|
|
|
|
|
<20> Produces eight independent PWM signals
|
|
|
|
|
|
<20> One dead-band generator
|
|
|
|
|
|
o Two QEI modules with position integrator for tracking encoder position
|
|
|
|
|
|
o Up to 65 GPIOs, depending on user configuration
|
|
|
|
|
|
o On-chip low drop-out (LDO) voltage regulator
|
|
|
|
|
|
|
|
|
|
|
|
GPIO Usage
|
|
|
|
|
|
|
|
|
|
|
|
PIN SIGNAL EVB Function
|
|
|
|
|
|
--- ----------- ---------------------------------------
|
|
|
|
|
|
26 PA0/U0RX Virtual COM port receive
|
|
|
|
|
|
27 PA1/U0TX Virtual COM port transmit
|
|
|
|
|
|
66 PB0/USB0ID USBID signal from the USB-On-the-Go
|
|
|
|
|
|
67 PB1/USB0VBUS USB VBUS input signal from USB-OTG
|
|
|
|
|
|
92 PB4/GPIO User pushbutton SW2.
|
|
|
|
|
|
80 PC0/TCK/SWCLK JTAG or SWD clock input
|
|
|
|
|
|
79 PC1/TMS/SWDIO JTAG TMS input or SWD bidirectional signal SWDIO
|
|
|
|
|
|
78 PC2/TDI JTAG TDI signal input
|
|
|
|
|
|
77 PC3/TDO/SWO JTAG TDO output or SWD trace signal SWO output.
|
|
|
|
|
|
10 PD0/GPIO User LED
|
|
|
|
|
|
60 PF2/LED1 Ethernet LED1 (yellow)
|
|
|
|
|
|
59 PF3/LED0 Ethernet LED0 (green)
|
|
|
|
|
|
83 PH3/USB0EPEN USB-OTG power switch
|
|
|
|
|
|
76 PH4/USB0PFLT Overcurrent input status from USB-OTG power switch
|
|
|
|
|
|
|
|
|
|
|
|
Development Environment
|
|
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
|
|
|
|
Either Linux or Cygwin on Windows can be used for the development environment.
|
|
|
|
|
|
The source has been built only using the GNU toolchain (see below). Other
|
|
|
|
|
|
toolchains will likely cause problems. Testing was performed using the Cygwin
|
|
|
|
|
|
environment.
|
|
|
|
|
|
|
|
|
|
|
|
GNU Toolchain Options
|
|
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
|
|
|
|
The NuttX make system has been modified to support the following different
|
|
|
|
|
|
toolchain options.
|
|
|
|
|
|
|
|
|
|
|
|
1. The CodeSourcery GNU toolchain,
|
|
|
|
|
|
2. The devkitARM GNU toolchain,
|
|
|
|
|
|
3. The NuttX buildroot Toolchain (see below).
|
|
|
|
|
|
|
|
|
|
|
|
All testing has been conducted using the NuttX buildroot toolchain. However,
|
|
|
|
|
|
the make system is setup to default to use the devkitARM toolchain. To use
|
|
|
|
|
|
the CodeSourcery or devkitARM, you simply need to add one of the following
|
|
|
|
|
|
configuration options to your .config (or defconfig) file:
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_LM3S_CODESOURCERYW=y : CodeSourcery under Windows
|
|
|
|
|
|
CONFIG_LM3S_CODESOURCERYL=y : CodeSourcery under Linux
|
|
|
|
|
|
CONFIG_LM3S_DEVKITARM=y : devkitARM under Windows
|
|
|
|
|
|
CONFIG_LM3S_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
|
|
|
|
|
|
|
|
|
|
|
|
If you are not using CONFIG_LM3S_BUILDROOT, then you may also have to modify
|
|
|
|
|
|
the PATH in the setenv.h file if your make cannot find the tools.
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: the CodeSourcery (for Windows) and devkitARM are Windows native toolchains.
|
|
|
|
|
|
The CodeSourcey (for Linux) and NuttX buildroot toolchains are Cygwin and/or Linux
|
|
|
|
|
|
native toolchains. There are several limitations to using a Windows based
|
|
|
|
|
|
toolchain in a Cygwin environment. The three biggest are:
|
|
|
|
|
|
|
|
|
|
|
|
1. The Windows toolchain cannot follow Cygwin paths. Path conversions are
|
|
|
|
|
|
performed automatically in the Cygwin makefiles using the 'cygpath' utility
|
|
|
|
|
|
but you might easily find some new path problems. If so, check out 'cygpath -w'
|
|
|
|
|
|
|
|
|
|
|
|
2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic links
|
|
|
|
|
|
are used in Nuttx (e.g., include/arch). The make system works around these
|
|
|
|
|
|
problems for the Windows tools by copying directories instead of linking them.
|
|
|
|
|
|
But this can also cause some confusion for you: For example, you may edit
|
|
|
|
|
|
a file in a "linked" directory and find that your changes had no effect.
|
|
|
|
|
|
That is because you are building the copy of the file in the "fake" symbolic
|
|
|
|
|
|
directory. If you use a Windows toolchain, you should get in the habit of
|
|
|
|
|
|
making like this:
|
|
|
|
|
|
|
|
|
|
|
|
make clean_context all
|
|
|
|
|
|
|
|
|
|
|
|
An alias in your .bashrc file might make that less painful.
|
|
|
|
|
|
|
|
|
|
|
|
3. Dependencies are not made when using Windows versions of the GCC. This is
|
|
|
|
|
|
because the dependencies are generated using Windows pathes which do not
|
|
|
|
|
|
work with the Cygwin make.
|
|
|
|
|
|
|
|
|
|
|
|
Support has been added for making dependencies with the windows-native toolchains.
|
|
|
|
|
|
That support can be enabled by modifying your Make.defs file as follows:
|
|
|
|
|
|
|
|
|
|
|
|
- MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
|
|
|
|
|
+ MKDEP = $(TOPDIR)/tools/mkdeps.sh --winpaths "$(TOPDIR)"
|
|
|
|
|
|
|
|
|
|
|
|
If you have problems with the dependency build (for example, if you are not
|
|
|
|
|
|
building on C:), then you may need to modify tools/mkdeps.sh
|
|
|
|
|
|
|
|
|
|
|
|
NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization
|
|
|
|
|
|
level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with
|
|
|
|
|
|
-Os.
|
|
|
|
|
|
|
|
|
|
|
|
NOTE 2: The devkitARM toolchain includes a version of MSYS make. Make sure that
|
|
|
|
|
|
the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
|
|
|
|
|
|
path or will get the wrong version of make.
|
|
|
|
|
|
|
|
|
|
|
|
NOTE 3: I recently (i.e., late 2011) tried building with the CodeSourcery Windows
|
|
|
|
|
|
toolchain. The code worked but required 40 seconds to boot (or even until the
|
|
|
|
|
|
status LED illuminates)!! Know idea why. With the buildroot tools, boot time is
|
|
|
|
|
|
a couple of seconds.
|
|
|
|
|
|
|
|
|
|
|
|
IDEs
|
|
|
|
|
|
^^^^
|
|
|
|
|
|
|
|
|
|
|
|
NuttX is built using command-line make. It can be used with an IDE, but some
|
|
|
|
|
|
effort will be required to create the project.
|
|
|
|
|
|
|
|
|
|
|
|
Makefile Build
|
|
|
|
|
|
--------------
|
|
|
|
|
|
Under Eclipse, it is pretty easy to set up an "empty makefile project" and
|
|
|
|
|
|
simply use the NuttX makefile to build the system. That is almost for free
|
|
|
|
|
|
under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty
|
|
|
|
|
|
makefile project in order to work with Windows (Google for "Eclipse Cygwin" -
|
|
|
|
|
|
there is a lot of help on the internet).
|
|
|
|
|
|
|
|
|
|
|
|
Native Build
|
|
|
|
|
|
------------
|
|
|
|
|
|
Here are a few tips before you start that effort:
|
|
|
|
|
|
|
|
|
|
|
|
1) Select the toolchain that you will be using in your .config file
|
|
|
|
|
|
2) Start the NuttX build at least one time from the Cygwin command line
|
|
|
|
|
|
before trying to create your project. This is necessary to create
|
|
|
|
|
|
certain auto-generated files and directories that will be needed.
|
|
|
|
|
|
3) Set up include pathes: You will need include/, arch/arm/src/lm3s,
|
|
|
|
|
|
arch/arm/src/common, arch/arm/src/armv7-m, and sched/.
|
|
|
|
|
|
4) All assembly files need to have the definition option -D __ASSEMBLY__
|
|
|
|
|
|
on the command line.
|
|
|
|
|
|
|
|
|
|
|
|
Startup files will probably cause you some headaches. The NuttX startup file
|
|
|
|
|
|
is arch/arm/src/lm3s/lm3s_vectors.S.
|
|
|
|
|
|
|
|
|
|
|
|
NuttX buildroot Toolchain
|
|
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
|
|
|
|
A GNU GCC-based toolchain is assumed. The files */setenv.sh should
|
|
|
|
|
|
be modified to point to the correct path to the Cortex-M3 GCC toolchain (if
|
|
|
|
|
|
different from the default in your PATH variable).
|
|
|
|
|
|
|
|
|
|
|
|
If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX
|
2012-09-17 16:33:42 -03:00
|
|
|
|
SourceForge download site (https://sourceforge.net/projects/nuttx/files/buildroot/).
|
2012-09-17 15:18:44 -03:00
|
|
|
|
This GNU toolchain builds and executes in the Linux or Cygwin environment.
|
|
|
|
|
|
|
|
|
|
|
|
1. You must have already configured Nuttx in <some-dir>/nuttx.
|
|
|
|
|
|
|
|
|
|
|
|
cd tools
|
|
|
|
|
|
./configure.sh ekk-lm3s9b96/<sub-dir>
|
|
|
|
|
|
|
|
|
|
|
|
2. Download the latest buildroot package into <some-dir>
|
|
|
|
|
|
|
|
|
|
|
|
3. unpack the buildroot tarball. The resulting directory may
|
|
|
|
|
|
have versioning information on it like buildroot-x.y.z. If so,
|
|
|
|
|
|
rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
|
|
|
|
|
|
|
|
|
|
|
|
4. cd <some-dir>/buildroot
|
|
|
|
|
|
|
|
|
|
|
|
5. cp configs/cortexm3-defconfig-4.3.3 .config
|
|
|
|
|
|
|
|
|
|
|
|
6. make oldconfig
|
|
|
|
|
|
|
|
|
|
|
|
7. make
|
|
|
|
|
|
|
|
|
|
|
|
8. Edit setenv.h, if necessary, so that the PATH variable includes
|
|
|
|
|
|
the path to the newly built binaries.
|
|
|
|
|
|
|
|
|
|
|
|
See the file configs/README.txt in the buildroot source tree. That has more
|
|
|
|
|
|
detailed PLUS some special instructions that you will need to follow if you
|
|
|
|
|
|
are building a Cortex-M3 toolchain for Cygwin under Windows.
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: This is an OABI toolchain.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stellaris EKK-LM3S9B96 Evaluation Kit Configuration Options
|
|
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
|
|
|
|
|
|
be set to:
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH=arm
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_family - For use in C code:
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_ARM=y
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_architecture - For use in C code:
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_CORTEXM3=y
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_CHIP=lm3s
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
|
|
|
|
|
|
chip:
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_CHIP_LM3S9B96
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
|
|
|
|
|
|
hence, the board that supports the particular chip or SoC.
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_BOARD=ekk-lm3s9b96 (for the Stellaris EKK-LM3S9b96 Evaluation Kit)
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_BOARD_name - For use in C code
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_BOARD_EKKLM3S9B96
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
|
|
|
|
|
|
of delay loops
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ENDIAN_BIG - define if big endian (default is little
|
|
|
|
|
|
endian)
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_DRAM_SIZE - Describes the installed DRAM (SRAM in this case):
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_DRAM_SIZE=0x00018000 (96Kb)
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_DRAM_START - The start address of installed DRAM
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_DRAM_START=0x20000000
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_IRQPRIO - The LM3S6918 supports interrupt prioritization
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_IRQPRIO=y
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
|
|
|
|
|
|
have LEDs
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
|
|
|
|
|
stack. If defined, this symbol is the size of the interrupt
|
|
|
|
|
|
stack in bytes. If not defined, the user task stacks will be
|
|
|
|
|
|
used during interrupt handling.
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
|
|
|
|
|
|
cause a 100 second delay during boot-up. This 100 second delay
|
|
|
|
|
|
serves no purpose other than it allows you to calibratre
|
|
|
|
|
|
CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure
|
|
|
|
|
|
the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
|
|
|
|
|
|
the delay actually is 100 seconds.
|
|
|
|
|
|
|
|
|
|
|
|
There are configurations for disabling support for interrupts GPIO ports.
|
|
|
|
|
|
GPIOJ must be disabled because it does not exist on the LM3S6918.
|
|
|
|
|
|
Additional interrupt support can be disabled if desired to reduce memory
|
|
|
|
|
|
footprint.
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_LM3S_DISABLE_GPIOA_IRQS=n
|
|
|
|
|
|
CONFIG_LM3S_DISABLE_GPIOB_IRQS=n
|
|
|
|
|
|
CONFIG_LM3S_DISABLE_GPIOC_IRQS=n
|
|
|
|
|
|
CONFIG_LM3S_DISABLE_GPIOD_IRQS=n
|
|
|
|
|
|
CONFIG_LM3S_DISABLE_GPIOE_IRQS=n
|
|
|
|
|
|
CONFIG_LM3S_DISABLE_GPIOF_IRQS=n
|
|
|
|
|
|
CONFIG_LM3S_DISABLE_GPIOG_IRQS=n
|
|
|
|
|
|
CONFIG_LM3S_DISABLE_GPIOH_IRQS=n
|
|
|
|
|
|
CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y
|
|
|
|
|
|
|
|
|
|
|
|
LM3S6818 specific device driver settings
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
|
|
|
|
|
|
console and ttys0 (default is the UART0).
|
|
|
|
|
|
CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
|
|
|
|
|
|
This specific the size of the receive buffer
|
|
|
|
|
|
CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
|
|
|
|
|
|
being sent. This specific the size of the transmit buffer
|
|
|
|
|
|
CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
|
|
|
|
|
|
CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
|
|
|
|
|
|
CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
|
|
|
|
|
|
CONFIG_UARTn_2STOP - Two stop bits
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_SSI0_DISABLE - Select to disable support for SSI0
|
|
|
|
|
|
CONFIG_SSI1_DISABLE - Select to disable support for SSI1
|
|
|
|
|
|
CONFIG_SSI_POLLWAIT - Select to disable interrupt driven SSI support.
|
|
|
|
|
|
Poll-waiting is recommended if the interrupt rate would be to
|
|
|
|
|
|
high in the interrupt driven case.
|
|
|
|
|
|
CONFIG_SSI_TXLIMIT - Write this many words to the Tx FIFO before
|
|
|
|
|
|
emptying the Rx FIFO. If the SPI frequency is high and this
|
|
|
|
|
|
value is large, then larger values of this setting may cause
|
|
|
|
|
|
Rx FIFO overrun errors. Default: half of the Tx FIFO size (4).
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_LM3S_ETHERNET - This must be set (along with CONFIG_NET)
|
|
|
|
|
|
to build the LM3S Ethernet driver
|
|
|
|
|
|
CONFIG_LM3S_ETHLEDS - Enable to use Ethernet LEDs on the board.
|
|
|
|
|
|
CONFIG_LM3S_BOARDMAC - If the board-specific logic can provide
|
|
|
|
|
|
a MAC address (via lm3s_ethernetmac()), then this should be selected.
|
|
|
|
|
|
CONFIG_LM3S_ETHHDUPLEX - Set to force half duplex operation
|
|
|
|
|
|
CONFIG_LM3S_ETHNOAUTOCRC - Set to suppress auto-CRC generation
|
|
|
|
|
|
CONFIG_LM3S_ETHNOPAD - Set to suppress Tx padding
|
|
|
|
|
|
CONFIG_LM3S_MULTICAST - Set to enable multicast frames
|
|
|
|
|
|
CONFIG_LM3S_PROMISCUOUS - Set to enable promiscuous mode
|
|
|
|
|
|
CONFIG_LM3S_BADCRC - Set to enable bad CRC rejection.
|
|
|
|
|
|
CONFIG_LM3S_DUMPPACKET - Dump each packet received/sent to the console.
|
|
|
|
|
|
|
|
|
|
|
|
Configurations
|
|
|
|
|
|
^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
|
|
|
|
Each Stellaris EKK-LM3S9b96 Evaluation Kit configuration is maintained in a
|
|
|
|
|
|
sudirectory and can be selected as follow:
|
|
|
|
|
|
|
|
|
|
|
|
cd tools
|
|
|
|
|
|
./configure.sh ekk-lm3s9b96/<subdir>
|
|
|
|
|
|
cd -
|
|
|
|
|
|
. ./setenv.sh
|
|
|
|
|
|
|
|
|
|
|
|
Where <subdir> is one of the following:
|
|
|
|
|
|
|
|
|
|
|
|
nsh:
|
|
|
|
|
|
Configures the NuttShell (nsh) located at examples/nsh. The
|
|
|
|
|
|
Configuration enables both the serial and telnetd NSH interfaces.
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: As it is configured now, you MUST have a network connected.
|
|
|
|
|
|
Otherwise, the NSH prompt will not come up because the Ethernet
|
|
|
|
|
|
driver is waiting for the network to come up. That is probably
|
|
|
|
|
|
a bug in the Ethernet driver behavior!
|
|
|
|
|
|
|
|
|
|
|
|
ostest:
|
|
|
|
|
|
This configuration directory, performs a simple OS test using
|
|
|
|
|
|
examples/ostest.
|
|
|
|
|
|
|
|
|
|
|
|
|
