px4-firmware/ROMFS/logging/logconv.m

101 lines
4.7 KiB
Mathematica
Raw Normal View History

% This Matlab Script can be used to import the binary logged values of the
% PX4FMU into data that can be plotted and analyzed.
% Clear everything
clc
2012-09-14 13:59:45 -03:00
clear all
close all
2012-09-14 13:59:45 -03:00
% Set the path to your sysvector.bin file here
filePath = 'sysvector.bin';
%%%%%%%%%%%%%%%%%%%%%%%
% SYSTEM VECTOR
%
% //All measurements in NED frame
%
% uint64_t timestamp; //[us]
% float gyro[3]; //[rad/s]
% float accel[3]; //[m/s^2]
% float mag[3]; //[gauss]
% float baro; //pressure [millibar]
% float baro_alt; //altitude above MSL [meter]
% float baro_temp; //[degree celcius]
% float control[4]; //roll, pitch, yaw [-1..1], thrust [0..1]
% float actuators[8]; //motor 1-8, in motor units (PWM: 1000-2000,AR.Drone: 0-512)
% float vbat; //battery voltage in [volt]
% float adc[3]; //remaining auxiliary ADC ports [volt]
% float local_position[3]; //tangent plane mapping into x,y,z [m]
% int32_t gps_raw_position[3]; //latitude [degrees] north, longitude [degrees] east, altitude above MSL [millimeter]
% float attitude[3]; //pitch, roll, yaw [rad]
% float rotMatrix[9]; //unitvectors
% float actuator_control[4]; //unitvector
% float optical_flow[4]; //roll, pitch, yaw [-1..1], thrust [0..1]
% Definition of the logged values
logFormat{1} = struct('name', 'timestamp', 'bytes', 8, 'array', 1, 'precision', 'uint64', 'machineformat', 'ieee-le.l64');
logFormat{2} = struct('name', 'gyro', 'bytes', 4, 'array', 3, 'precision', 'float', 'machineformat', 'ieee-le');
logFormat{3} = struct('name', 'accel', 'bytes', 4, 'array', 3, 'precision', 'float', 'machineformat', 'ieee-le');
logFormat{4} = struct('name', 'mag', 'bytes', 4, 'array', 3, 'precision', 'float', 'machineformat', 'ieee-le');
logFormat{5} = struct('name', 'baro', 'bytes', 4, 'array', 1, 'precision', 'float', 'machineformat', 'ieee-le');
logFormat{6} = struct('name', 'baro_alt', 'bytes', 4, 'array', 1, 'precision', 'float', 'machineformat', 'ieee-le');
logFormat{7} = struct('name', 'baro_temp', 'bytes', 4, 'array', 1, 'precision', 'float', 'machineformat', 'ieee-le');
logFormat{8} = struct('name', 'control', 'bytes', 4, 'array', 4, 'precision', 'float', 'machineformat', 'ieee-le');
logFormat{9} = struct('name', 'actuators', 'bytes', 4, 'array', 8, 'precision', 'float', 'machineformat', 'ieee-le');
logFormat{10} = struct('name', 'vbat', 'bytes', 4, 'array', 1, 'precision', 'float', 'machineformat', 'ieee-le');
logFormat{11} = struct('name', 'adc', 'bytes', 4, 'array', 3, 'precision', 'float', 'machineformat', 'ieee-le');
logFormat{12} = struct('name', 'local_position', 'bytes', 4, 'array', 3, 'precision', 'float', 'machineformat', 'ieee-le');
logFormat{13} = struct('name', 'gps_raw_position', 'bytes', 4, 'array', 3, 'precision', 'uint32', 'machineformat', 'ieee-le');
logFormat{14} = struct('name', 'attitude', 'bytes', 4, 'array', 3, 'precision', 'float', 'machineformat', 'ieee-le');
logFormat{15} = struct('name', 'rot_matrix', 'bytes', 4, 'array', 9, 'precision', 'float', 'machineformat', 'ieee-le');
logFormat{16} = struct('name', 'vicon_position', 'bytes', 4, 'array', 6, 'precision', 'float', 'machineformat', 'ieee-le');
logFormat{17} = struct('name', 'actuator_control', 'bytes', 4, 'array', 4, 'precision', 'float', 'machineformat', 'ieee-le');
logFormat{18} = struct('name', 'optical_flow', 'bytes', 4, 'array', 6, 'precision', 'float', 'machineformat', 'ieee-le');
% First get length of one line
columns = length(logFormat);
lineLength = 0;
for i=1:columns
lineLength = lineLength + logFormat{i}.bytes * logFormat{i}.array;
end
if exist(filePath, 'file')
fileInfo = dir(filePath);
fileSize = fileInfo.bytes;
elements = int64(fileSize./(lineLength))
fid = fopen(filePath, 'r');
offset = 0;
for i=1:columns
% using fread with a skip speeds up the import drastically, do not
% import the values one after the other
sysvector.(genvarname(logFormat{i}.name)) = transpose(fread(...
fid, ...
[logFormat{i}.array, elements], [num2str(logFormat{i}.array),'*',logFormat{i}.precision,'=>',logFormat{i}.precision], ...
lineLength - logFormat{i}.bytes*logFormat{i}.array, ...
logFormat{i}.machineformat) ...
);
offset = offset + logFormat{i}.bytes*logFormat{i}.array;
fseek(fid, offset,'bof');
2012-09-14 13:59:45 -03:00
end
% shot the flight time
time_us = sysvector.timestamp(end) - sysvector.timestamp(1);
time_s = time_us*1e-6
time_m = time_s/60
% close the logfile
fclose(fid);
disp(['end log2matlab conversion' char(10)]);
else
disp(['file: ' filePath ' does not exist' char(10)]);
2012-09-14 13:59:45 -03:00
end