px4-firmware/nuttx/drivers/input/tsc2007.h

121 lines
6.2 KiB
C
Raw Normal View History

/********************************************************************************************
* drivers/input/tsc2007.h
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* References:
* "1.2V to 3.6V, 12-Bit, Nanopower, 4-Wire Micro TOUCH SCREEN CONTROLLER
* with I2C Interface," SBAS405A March 2007, Revised, March 2009, Texas
* Instruments Incorporated
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
********************************************************************************************/
/* The TSC2007 is an analog interface circuit for a human interface touch screen device.
* All peripheral functions are controlled through the command byte and onboard state
* machines.
*/
#ifndef __DRIVERS_INPUT_TSC2007_H
#define __DRIVERS_INPUT_TSC2007_H
/********************************************************************************************
* Included Files
********************************************************************************************/
/********************************************************************************************
* Pre-Processor Definitions
********************************************************************************************/
/* TSC2007 Address */
#define TSC2007_ADDRESS_MASK (0xf8) /* Bits 3-7: Invariant part of TSC2007 address */
#define TSC2007_ADDRESS (0x90) /* Bits 3-7: Always set at '10010' */
#define TSC2007_A1 (1 << 2) /* Bit 2: A1 */
#define TSC2007_A0 (1 << 1) /* Bit 1: A1 */
#define TSC2007_READ (1 << 0) /* Bit0=1: Selects read operation */
#define TSC2007_WRITE (0) /* Bit0=0: Selects write operation */
/* TSC2007 Command Byte */
#define TSC2007_CMD_FUNC_SHIFT (4) /* Bits 4-7: Converter function select bits */
#define TSC2007_CMD_FUNC_MASK (15 << TSC2007_CMD_FUNC_SHIFT)
# define TSC2007_CMD_FUNC_TEMP0 (0 << TSC2007_CMD_FUNC_SHIFT) /* Measure TEMP0 */
# define TSC2007_CMD_FUNC_AUX (2 << TSC2007_CMD_FUNC_SHIFT) /* Measure AUX */
# define TSC2007_CMD_FUNC_TEMP1 (4 << TSC2007_CMD_FUNC_SHIFT) /* Measure TEMP1 */
# define TSC2007_CMD_FUNC_XON (8 << TSC2007_CMD_FUNC_SHIFT) /* Activate X-drivers */
# define TSC2007_CMD_FUNC_YON (9 << TSC2007_CMD_FUNC_SHIFT) /* Activate Y-drivers */
# define TSC2007_CMD_FUNC_YXON (10 << TSC2007_CMD_FUNC_SHIFT) /* Activate Y+, X-drivers */
# define TSC2007_CMD_FUNC_SETUP (11 << TSC2007_CMD_FUNC_SHIFT) /* Setup command */
# define TSC2007_CMD_FUNC_XPOS (12 << TSC2007_CMD_FUNC_SHIFT) /* Measure X position */
# define TSC2007_CMD_FUNC_YPOS (13 << TSC2007_CMD_FUNC_SHIFT) /* Measure Y position */
# define TSC2007_CMD_FUNC_Z1POS (14 << TSC2007_CMD_FUNC_SHIFT) /* Measure Z1 position */
# define TSC2007_CMD_FUNC_Z2POS (15 << TSC2007_CMD_FUNC_SHIFT) /* Measure Z2 positionn */
#define TSC2007_CMD_PWRDN_SHIFT (2) /* Bits 2-3: Power-down bits */
#define TSC2007_CMD_PWRDN_MASK (3 << TSC2007_CMD_PWRDN_SHIFT)
# define TSC2007_CMD_PWRDN_IRQEN (0 << TSC2007_CMD_PWRDN_SHIFT) /* 00: Power down between cycles; PENIRQ enabled */
# define TSC2007_CMD_ADCON_IRQDIS (1 << TSC2007_CMD_PWRDN_SHIFT) /* 01: A/D converter on; PENIRQ disabled */
# define TSC2007_CMD_ADCOFF_IRQEN (2 << TSC2007_CMD_PWRDN_SHIFT) /* 10: A/D converter off; PENIRQ enabled. */
/* 11: A/D converter on; PENIRQ disabled. */
#define TSC2007_CMD_12BIT (0) /* Bit 1: 0=12-bit */
#define TSC2007_CMD_8BIT (1 << 1) /* Bit 1: 1=8-bit */
/* Bit 0: Don't care */
/* TSC2007 Setup Command */
#define TSC2007_SETUP_CMD TSC2007_CMD_FUNC_SETUP /* Bits 4-7: Setup command */
/* Bits 2-3: Must be zero */
#define TSC2007_CMD_USEMAV (0) /* Bit 1: 0: Use the onboard MAV filter (default) */
#define TSC2007_CMD_BYPASSMAV (1 << 1) /* Bit 1: 1: Bypass the onboard MAV filter */
#define TSC2007_CMD_PU_50KOHM (0) /* Bit 0: 0: RIRQ = 50kOhm (default). */
#define TSC2007_CMD_PU_90KOHM (1 << 1) /* Bit 0: 1: 1: RIRQ = 90kOhm */
/********************************************************************************************
* Public Types
********************************************************************************************/
/********************************************************************************************
* Public Function Prototypes
********************************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __DRIVERS_INPUT_TSC2007_H */