px4-firmware/Tools/px_uploader.py

327 lines
9.5 KiB
Python
Raw Normal View History

############################################################################
#
# Copyright (C) 2012 PX4 Development Team. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name PX4 nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
#
# Serial firmware uploader for the PX4FMU bootloader
#
# The PX4 firmware file is a JSON-encoded Python object, containing
# metadata fields and a zlib-compressed base64-encoded firmware image.
#
# The uploader uses the following fields from the firmware file:
#
# image
# The firmware that will be uploaded.
# image_size
# The size of the firmware in bytes.
# board_id
# The board for which the firmware is intended.
# board_revision
# Currently only used for informational purposes.
#
import sys
import argparse
import binascii
import serial
import os
import struct
import json
import zlib
import base64
import time
from sys import platform as _platform
class firmware(object):
'''Loads a firmware file'''
desc = {}
image = bytearray()
def __init__(self, path):
# read the file
f = open(path, "r")
self.desc = json.load(f)
f.close()
self.image = zlib.decompress(base64.b64decode(self.desc['image']))
# pad image to 4-byte length
while ((len(self.image) % 4) != 0):
self.image += b'\x00'
def property(self, propname):
return self.desc[propname]
class uploader(object):
'''Uploads a firmware file to the PX FMU bootloader'''
NOP = chr(0x00)
OK = chr(0x10)
FAILED = chr(0x11)
INSYNC = chr(0x12)
EOC = chr(0x20)
GET_SYNC = chr(0x21)
GET_DEVICE = chr(0x22)
CHIP_ERASE = chr(0x23)
CHIP_VERIFY = chr(0x24)
PROG_MULTI = chr(0x27)
READ_MULTI = chr(0x28)
REBOOT = chr(0x30)
INFO_BL_REV = chr(1) # bootloader protocol revision
BL_REV = 2 # supported bootloader protocol
INFO_BOARD_ID = chr(2) # board type
INFO_BOARD_REV = chr(3) # board revision
INFO_FLASH_SIZE = chr(4) # max firmware size in bytes
PROG_MULTI_MAX = 60 # protocol max is 255, must be multiple of 4
READ_MULTI_MAX = 60 # protocol max is 255, something overflows with >= 64
def __init__(self, portname, baudrate):
# open the port, keep the default timeout short so we can poll quickly
self.port = serial.Serial(portname, baudrate, timeout=0.25)
def close(self):
if self.port is not None:
self.port.close()
def __send(self, c):
# print("send " + binascii.hexlify(c))
self.port.write(str(c))
def __recv(self, count = 1):
c = self.port.read(count)
if (len(c) < 1):
raise RuntimeError("timeout waiting for data")
# print("recv " + binascii.hexlify(c))
return c
def __getSync(self):
self.port.flush()
c = self.__recv()
if (c != self.INSYNC):
raise RuntimeError("unexpected 0x%x instead of INSYNC" % ord(c))
c = self.__recv()
if (c != self.OK):
raise RuntimeError("unexpected 0x%x instead of OK" % ord(c))
# attempt to get back into sync with the bootloader
def __sync(self):
# send a stream of ignored bytes longer than the longest possible conversation
# that we might still have in progress
# self.__send(uploader.NOP * (uploader.PROG_MULTI_MAX + 2))
self.port.flushInput()
self.__send(uploader.GET_SYNC
+ uploader.EOC)
self.__getSync()
def __trySync(self):
c = self.__recv()
if (c != self.INSYNC):
#print("unexpected 0x%x instead of INSYNC" % ord(c))
return False;
c = self.__recv()
if (c != self.OK):
#print("unexpected 0x%x instead of OK" % ord(c))
return False
return True
# send the GET_DEVICE command and wait for an info parameter
def __getInfo(self, param):
self.__send(uploader.GET_DEVICE + param + uploader.EOC)
raw = self.__recv(4)
self.__getSync()
value = struct.unpack_from('<I', raw)
return value[0]
# send the CHIP_ERASE command and wait for the bootloader to become ready
def __erase(self):
self.__send(uploader.CHIP_ERASE
+ uploader.EOC)
# erase is very slow, give it 10s
old_timeout = self.port.timeout
self.port.timeout = 10
self.__getSync()
self.port.timeout = old_timeout
# send a PROG_MULTI command to write a collection of bytes
def __program_multi(self, data):
self.__send(uploader.PROG_MULTI
+ chr(len(data)))
self.__send(data)
self.__send(uploader.EOC)
self.__getSync()
# verify multiple bytes in flash
def __verify_multi(self, data):
self.__send(uploader.READ_MULTI
+ chr(len(data))
+ uploader.EOC)
programmed = self.__recv(len(data))
if (programmed != data):
print("got " + binascii.hexlify(programmed))
print("expect " + binascii.hexlify(data))
return False
self.__getSync()
return True
# send the reboot command
def __reboot(self):
self.__send(uploader.REBOOT)
self.port.flush()
# split a sequence into a list of size-constrained pieces
def __split_len(self, seq, length):
return [seq[i:i+length] for i in range(0, len(seq), length)]
# upload code
def __program(self, fw):
code = fw.image
groups = self.__split_len(code, uploader.PROG_MULTI_MAX)
for bytes in groups:
self.__program_multi(bytes)
# verify code
def __verify(self, fw):
self.__send(uploader.CHIP_VERIFY
+ uploader.EOC)
self.__getSync()
code = fw.image
groups = self.__split_len(code, uploader.READ_MULTI_MAX)
for bytes in groups:
if (not self.__verify_multi(bytes)):
raise RuntimeError("Verification failed")
# get basic data about the board
def identify(self):
# make sure we are in sync before starting
self.__sync()
# get the bootloader protocol ID first
bl_rev = self.__getInfo(uploader.INFO_BL_REV)
if bl_rev != uploader.BL_REV:
raise RuntimeError("Bootloader protocol mismatch")
self.board_type = self.__getInfo(uploader.INFO_BOARD_ID)
self.board_rev = self.__getInfo(uploader.INFO_BOARD_REV)
self.fw_maxsize = self.__getInfo(uploader.INFO_FLASH_SIZE)
# upload the firmware
def upload(self, fw):
# Make sure we are doing the right thing
if self.board_type != fw.property('board_id'):
raise RuntimeError("Firmware not suitable for this board")
if self.fw_maxsize < fw.property('image_size'):
raise RuntimeError("Firmware image is too large for this board")
print("erase...")
self.__erase()
print("program...")
self.__program(fw)
print("verify...")
self.__verify(fw)
print("done, rebooting.")
self.__reboot()
self.port.close()
# Parse commandline arguments
parser = argparse.ArgumentParser(description="Firmware uploader for the PX autopilot system.")
parser.add_argument('--port', action="store", required=True, help="Serial port(s) to which the FMU may be attached")
parser.add_argument('--baud', action="store", type=int, default=115200, help="Baud rate of the serial port (default is 115200), only required for true serial ports.")
parser.add_argument('firmware', action="store", help="Firmware file to be uploaded")
args = parser.parse_args()
# Load the firmware file
fw = firmware(args.firmware)
print("Loaded firmware for %x,%x, waiting for the bootloader..." % (fw.property('board_id'), fw.property('board_revision')))
# Spin waiting for a device to show up
while True:
for port in args.port.split(","):
#print("Trying %s" % port)
# create an uploader attached to the port
try:
if "linux" in _platform:
# Linux, don't open Mac OS and Win ports
if not "COM" in port and not "tty.usb" in port:
up = uploader(port, args.baud)
elif "darwin" in _platform:
# OS X, don't open Windows and Linux ports
if not "COM" in port and not "ACM" in port:
up = uploader(port, args.baud)
elif "win" in _platform:
# Windows, don't open POSIX ports
if not "/" in port:
up = uploader(port, args.baud)
except:
# open failed, rate-limit our attempts
time.sleep(0.05)
# and loop to the next port
continue
# port is open, try talking to it
try:
# identify the bootloader
up.identify()
print("Found board %x,%x on %s" % (up.board_type, up.board_rev, port))
except:
# most probably a timeout talking to the port, no bootloader
continue
try:
# ok, we have a bootloader, try flashing it
up.upload(fw)
except RuntimeError as ex:
# print the error
print("ERROR: %s" % ex.args)
finally:
# always close the port
up.close()
# we could loop here if we wanted to wait for more boards...
sys.exit(0)