px4-firmware/makefiles/upload.mk

#
# Rules and tools for uploading firmware to various PX4 boards.
#

UPLOADER		 = $(PX4_BASE)/Tools/px_uploader.py

SYSTYPE			:= $(shell uname -s)

#
# Serial port defaults.
#
# XXX The uploader should be smarter than this.
#
ifeq ($(SYSTYPE),Darwin)
SERIAL_PORTS		?= "/dev/tty.usbmodemPX1,/dev/tty.usbmodemPX2,/dev/tty.usbmodemPX3,/dev/tty.usbmodemPX4,/dev/tty.usbmodem1,/dev/tty.usbmodem2,/dev/tty.usbmodem3,/dev/tty.usbmodem4"
endif
ifeq ($(SYSTYPE),Linux)
SERIAL_PORTS		?= "/dev/ttyACM5,/dev/ttyACM4,/dev/ttyACM3,/dev/ttyACM2,/dev/ttyACM1,/dev/ttyACM0"
endif
ifeq ($(SERIAL_PORTS),)
SERIAL_PORTS		 = "\\\\.\\COM32,\\\\.\\COM31,\\\\.\\COM30,\\\\.\\COM29,\\\\.\\COM28,\\\\.\\COM27,\\\\.\\COM26,\\\\.\\COM25,\\\\.\\COM24,\\\\.\\COM23,\\\\.\\COM22,\\\\.\\COM21,\\\\.\\COM20,\\\\.\\COM19,\\\\.\\COM18,\\\\.\\COM17,\\\\.\\COM16,\\\\.\\COM15,\\\\.\\COM14,\\\\.\\COM13,\\\\.\\COM12,\\\\.\\COM11,\\\\.\\COM10,\\\\.\\COM9,\\\\.\\COM8,\\\\.\\COM7,\\\\.\\COM6,\\\\.\\COM5,\\\\.\\COM4,\\\\.\\COM3,\\\\.\\COM2,\\\\.\\COM1,\\\\.\\COM0"
endif

.PHONY:	all upload-$(METHOD)-$(BOARD)
all:	upload-$(METHOD)-$(BOARD)

upload-serial-px4fmu:	$(BUNDLE) $(UPLOADER)
	$(Q) $(PYTHON) -u $(UPLOADER) --port $(SERIAL_PORTS) $(BUNDLE)

upload-serial-px4fmuv2:	$(BUNDLE) $(UPLOADER)
	$(Q) $(PYTHON) -u $(UPLOADER) --port $(SERIAL_PORTS) $(BUNDLE)

#
# JTAG firmware uploading with OpenOCD
#
JTAGCONFIG		?= interface/olimex-jtag-tiny.cfg

upload-jtag-px4fmu: all
	@$(ECHO) Attempting to flash PX4FMU board via JTAG
	$(Q) $(OPENOCD) -f $(JTAGCONFIG) -f ../Bootloader/stm32f4x.cfg -c init -c "reset halt" -c "flash write_image erase nuttx/nuttx" -c "flash write_image erase ../Bootloader/px4fmu_bl.elf" -c "reset run" -c shutdown

upload-jtag-px4io: all
	@$(ECHO) Attempting to flash PX4IO board via JTAG
	$(Q) $(OPENOCD) -f $(JTAGCONFIG) -f ../Bootloader/stm32f1x.cfg -c init -c "reset halt" -c "flash write_image erase nuttx/nuttx" -c "flash write_image erase ../Bootloader/px4io_bl.elf" -c "reset run" -c shutdown