dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
px4-firmware/nuttx/configs/ne64badge/README.txt

482 lines
18 KiB
Plaintext
Raw Normal View History

Resync new repository with old repo r5166 git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5153 42af7a65-404d-4744-a932-0658087f49c3
2012-09-17 15:18:44 -03:00
README
^^^^^^
This README discusses issues unique to NuttX configurations for the
Future Electronics Group NE64 /PoE Badge board based on the
MC9S12NE64 hcs12 cpu.
CONTENTS
^^^^^^^^
<20> MC9S12NE64 Features
<20> NE64 Badge Pin Usage
<20> Development Environment
<20> NuttX Buildroot Toolchain
<20> FreeScale HCS12 Serial Monitor
<20> Soft Registers
<20> HCS12/NE64BADGE-specific Configuration Options
<20> Configurations
MC9S12NE64 Features
^^^^^^^^^^^^^^^^^^^
<20> 16-bit HCS12 core
- HCS12 CPU
- Upward compatible with M68HC11 instruction set
- Interrupt stacking and programmer<65>s model identical to M68HC11
- Instruction queue
- Enhanced indexed addressing
- Memory map and interface (MMC)
- Interrupt control (INT)
- Background debug mode (BDM)
- Enhanced debug12 module, including breakpoints and change-of-flow
trace buffer (DBG)
- Multiplexed expansion bus interface (MEBI) - available only in
112-pin package version
<20> Wakeup interrupt inputs
- Up to 21 port bits available for wakeup interrupt function with
digital filtering
<20> Memory
- 64K bytes of FLASH EEPROM
- 8K bytes of RAM
<20> Analog-to-digital converter (ATD)
- One 8-channel module with 10-bit resolution
- External conversion trigger capability
<20> Timer module (TIM)
- 4-channel timer
- Each channel configurable as either input capture or output
compare
- Simple PWM mode
- Modulo reset of timer counter
- 16-bit pulse accumulator
- External event counting
- Gated time accumulation
<20> Serial interfaces
- Two asynchronous serial communications interface (SCI)
- One synchronous serial peripheral interface (SPI)
- One inter-IC bus (IIC)
<20> Ethernet Media access controller (EMAC)
- IEEE 802.3 compliant
- Medium-independent interface (MII)
- Full-duplex and half-duplex modes
- Flow control using pause frames
- MII management function
- Address recognition
- Frames with broadcast address are always accepted or always
rejected
- Exact match for single 48-bit individual (unicast) address
- Hash (64-bit hash) check of group (multicast) addresses
- Promiscuous mode
<20> Ethertype filter
<20> Loopback mode
<20> Two receive and one transmit Ethernet buffer interfaces
<20> Ethernet 10/100 Mbps transceiver (EPHY)
- IEEE 802.3 compliant
- Digital adaptive equalization
- Half-duplex and full-duplex
- Auto-negotiation next page ability
- Baseline wander (BLW) correction
- 125-MHz clock generator and timing recovery
- Integrated wave-shaping circuitry
- Loopback modes
<20> CRG (clock and reset generator module)
- Windowed COP watchdog
- Real-time interrupt
- Clock monitor
- Pierce oscillator
- Phase-locked loop clock frequency multiplier
- Limp home mode in absence of external clock
- 25-MHz crystal oscillator reference clock
<20> Operating frequency
- 50 MHz equivalent to 25 MHz bus speed for single chip
- 32 MHz equivalent to 16 MHz bus speed in expanded bus modes
<20> Internal 2.5-V regulator
- Supports an input voltage range from 3.3 V <20> 5%
- Low-power mode capability
- Includes low-voltage reset (LVR) circuitry
<20> 80-pin TQFP-EP or 112-pin LQFP package
- Up to 70 I/O pins with 3.3 V input and drive capability (112-pin
package)
- Up to two dedicated 3.3 V input only lines (IRQ, XIRQ)
<20> Development support
- Single-wire background debug<75> mode (BDM)
- On-chip hardware breakpoints
- Enhanced DBG debug features
NE64 Badge Pin Usage
^^^^^^^^^^^^^^^^^^^^
PIN PIN NAME BOARD SIGNAL NOTES
--- ------------------- -------------- ----------------------
44 RESET J3 RESET_L Also to SW3
57 BKGD/MODC/TAGHI_B BDM BKGD CON6A
85 PAD0 VR1 Potentiometer
86 PAD1 J3 ANALOG_IN0 Not used on board
87 PAD2 J3 ANALOG_IN1 " " " " "" " "
88 PAD3 J3 ANALOG_IN2 " " " " "" " "
89 PAD4 J3 ANALOG_IN3 " " " " "" " "
70 PHY_TXP J7 TD+ RJ45 connector
71 PHY_TXN J7 TD- RJ45 connector
73 PHY_RXP J7 RD+ RJ45 connector
74 PHY_RXN J7 RD- RJ45 connector
Ports A,B,E,K managed by the MEBI block
---------------------------------------
60 PA0/ADDR8/DATA8 J3 ADDR_DATA8 Not used on board
61 PA1/ADDR9/DATA9 J3 ADDR_DATA9 " " " " "" " "
62 PA2/ADDR10/DATA10 J3 ADDR_DATA10 " " " " "" " "
63 PA3/ADDR11/DATA11 J3 ADDR_DATA11 " " " " "" " "
77 PA4/ADDR12/DATA12 J3 ADDR_DATA12 " " " " "" " "
78 PA5/ADDR13/DATA13 J3 ADDR_DATA13 " " " " "" " "
79 PA6/ADDR14/DATA14 J3 ADDR_DATA14 " " " " "" " "
80 PA7/ADDR15/DATA15 J3 ADDR_DATA15 " " " " "" " "
10 PB0/ADDR0/DATA0 J3 ADDR_DATA0 Not used on board
11 PB1/ADDR1/DATA1 J3 ADDR_DATA1 " " " " "" " "
12 PB2/ADDR2/DATA2 J3 ADDR_DATA2 " " " " "" " "
13 PB3/ADDR3/DATA3 J3 ADDR_DATA3 " " " " "" " "
16 PB4/ADDR4/DATA4 J3 ADDR_DATA4 " " " " "" " "
17 PB5/ADDR5/DATA5 J3 ADDR_DATA5 " " " " "" " "
18 PB6/ADDR6/DATA6 J3 ADDR_DATA6 " " " " "" " "
19 PB7/ADDR7/DATA7 J3 ADDR_DATA7 " " " " "" " "
56 PE0/XIRQ_B BUTTON1 SW1
55 PE1/IRQ_B J3 IRQ Not used on board
54 PE2/R_W J3 RW " " " " "" " "
53 PE3/LSTRB_B/TAGLO_B J3 LSTRB " " " " "" " "
41 PE4/ECLK J3 ECLK " " " " "" " "
40 PE5/IPIPE0/MODA J3 MODA " " " " "" " "
39 PE6/IPIPE1/MODB J3 MODB " " " " "" " "
38 PE7/NOACC/XCLKS_B pulled low pulled low
97 PK0/XADR14 N/C N/C
98 PK1/XADR15 N/C N/C
99 PK2/XADR16 N/C N/C
100 PK3/XADR17 N/C N/C
103 PK4/XADR18 N/C N/C
104 PK5/XADR19 N/C N/C
105 PK6/XCS_B J3 XCS Not used on board
106 PK7/ECS_B/ROMCTL J3 ECS " " " " "" " "
Ports T,S,G,H,J,L managed by the PIM Block
------------------------------------------
110 PT4/IOC1_4 J3 GPIO8 Not used on board
109 PT5/IOC1_5 J3 GPIO9 " " " " "" " "
108 PT6/IOC1_6 J3 GPIO10 " " " " "" " "
107 PT7/IOC1_7 N/C N/C
30 PS0/RXD0 RS232_RX Eventually maps to J2 RXD
31 PS1/TXD0 RS232_TX Eventually maps to J2 TXD
32 PS2/RXD1 J3&J4 UART_RX Not used on board
33 PS3/TXD1 J3&J4 UART_TX " " " " "" " "
34 PS4/MISO J3 SPI_MISO " " " " "" " "
35 PS5/MOSI J3 SPI_MOSI " " " " "" " "
36 PS6/SCK J3 SPI_CLOCK " " " " "" " "
37 PS7/SS_B J3 SPI_SS " " " " "" " "
22 PG0/RXD0/KWG0 J3 GPIO0 Not used on board
23 PG1/RXD1/KWG1 J3 GPIO1 " " " " "" " "
24 PG2/RXD2/KWG2 J3 GPIO2 " " " " "" " "
25 PG3/RXD3/KWG3 J3 GPIO3 " " " " "" " "
26 PG4/RXCLK/KWG4 J3 GPIO4 " " " " "" " "
27 PG5/RXDV/KWG5 J3 GPIO5 " " " " "" " "
28 PG6/RXER/KWG6 J3 GPIO6 " " " " "" " "
29 PG7/KWG7 J3 GPIO7 " " " " "" " "
7 PH0/TXD0/KWH0 N/C N/C
6 PH1/TXD1/KWH1 N/C N/C
5 PH2/TXD2/KWH2 J4 XBEE_RESET Not used on board
4 PH3/TXD3/KWH3 J4 XBEE_RSSI Not used on board
3 PH4/TXCLK/KWH4 BUTTON2 SW2
2 PH5/TXDV/KWH5 J5 XBEE_LOAD_H Not used on board
1 PH6/TXER/KWH6 J4 XBEE_LOAD_L Not used on board
8 PJ0/MDC/KWJ0 LED1 D21, red
9 PJ1/MDIO/KWJ1 LED2 D22, red
20 PJ2/CRS/KWJ2 J3 SPI_CS Not used on board
21 PJ3/COL/KWJ3 N/C
112 PJ6/SDA/KWJ6 J3 I2C_DATA Not used on board
111 PJ7/SCL/KWJ7 J3 I2C_CLOCK " " " " "" " "
51 PL6/TXER/KWL6 N/C N/C
52 PL5/TXDV/KWL5 N/C N/C
58 PL4/COLLED Collision LED red
59 PL3/DUPLED Full Duplex LED yellow
81 PL2/SPDLED 100Mbps Speed LED yellow
83 PL1/LNKLED Link Good LED green
84 PL0/ACTLED Activity LED yellow
Development Environment
^^^^^^^^^^^^^^^^^^^^^^^
Either Linux or Cygwin on Windows can be used for the development
environment. The source has been built only using the GNU toolchain
(see below). Other toolchains will likely cause problems.
NuttX Buildroot Toolchain
^^^^^^^^^^^^^^^^^^^^^^^^^
A GNU GCC-based toolchain is assumed. The files */setenv.sh should
be modified to point to the correct path to the HC12 GCC toolchain (if
different from the default in your PATH variable).
If you have no HC12 toolchain, one can be downloaded from the NuttX
Upate some pathes for the new NuttX repository git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5156 42af7a65-404d-4744-a932-0658087f49c3
2012-09-17 16:33:42 -03:00
SourceForge download site (https://sourceforge.net/projects/nuttx/files/buildroot/).
Resync new repository with old repo r5166 git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5153 42af7a65-404d-4744-a932-0658087f49c3
2012-09-17 15:18:44 -03:00
This GNU toolchain builds and executes in the Linux or Cygwin
environments.
1. You must have already configured Nuttx in <some-dir>/nuttx.
cd tools
./configure.sh ne64badge/<sub-dir>
2. Download the latest buildroot package into <some-dir>
3. unpack the buildroot tarball. The resulting directory may
have versioning information on it like buildroot-x.y.z. If so,
rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
4. cd <some-dir>/buildroot
5. cp configs/m9s12x-defconfig-3.3.6 .config
6. make oldconfig
7. make
If the make fails because it can't find the file to download, you may
have to locate the file on the internet and download it into the archives/
directory manually. For example, binutils-2.18 can be found here:
http://ftp.gnu.org/gnu/binutils/
8. Edit setenv.h, if necessary, so that the PATH variable includes
the path to the newly built binaries.
See the file configs/README.txt in the buildroot source tree. That has more
detailed PLUS some special instructions that you will need to follow if you are
building a Cortex-M3 toolchain for Cygwin under Windows.
FreeScale HCS12 Serial Monitor
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
General:
The NuttX HCS12 port is configured to use the Freescale HCS serial
monitor. This monitor supports primitive debug commands that allow
FLASH/EEPROM programming and debugging through an RS-232 serial
interface. The serial monior is 2Kb in size and resides in FLASH at
addresses 0xf800-0xffff. The monitor does not use any RAM other than
the stack itself.
AN2458
The serial monitor is described in detail in Freescale Application
Note AN2458.pdf.
COP:
The serial monitor uses the COP for the cold reset function and should
not be used by the application without some precautions (see AN2458).
Clocking:
The serial monitor sets the operating frequency to 24 MHz. This is
not altered by the NuttX start-up; doing so would interfere with the
operation of the serial monitor.
Memory Configuration:
Registers:
<20> Register space is located at 0x0000<30>0x03ff.
FLASH:
<20> FLASH memory is any address greater than 0x4000. All paged
addresses are assumed to be FLASH memory.
<20> Application code should exclude the 0xf780<38>0xff7f memory.
SRAM:
<20> RAM ends at 0x3FFF and builds down to the limit of the device<63>s
available RAM.
<20> The serial monitor's stack pointer is set to the end of RAM+1
(0x4000).
EEPROM:
<20> EEPROM (if the target device has any) is limited to the available
space between the registers and the RAM (0x0400<30>to start of RAM).
External Devices:
<20> External devices attached to the multiplexed external bus
interface are not supported
Serial Communications:
The serial monitor uses RS-232 serial communications through SCI0 at
115,200 baud. The monitor must have exclusive use of this interface.
Access to the serial port is available through a monitor jump table.
Interrrupts:
The serial monitor redirects interrupt vectors to an unprotected
portion of FLASH just before the protected monitor program
(0xf780<38>0xf7fe). The monitor will automatically redirect vector
programming operations to these user vectors. The user code should
therefore keep the normal (non-monitor) vector locations
(0xff80<38>0xfffe).
Soft Registers
^^^^^^^^^^^^^^
The mc68hcs12 compilation is prone to errors like the following:
CC: lib_b16sin.c
lib_b16sin.c: In function `b16sin':
lib_b16sin.c:110: error: unable to find a register to spill in class `S_REGS'
lib_b16sin.c:110: error: this is the insn:
(insn:HI 41 46 44 8 (parallel [
(set (subreg:SI (reg:DI 58 [ rad ]) 4)
(reg/v:SI 54 [ rad ]))
(clobber (scratch:HI))
]) 20 {movsi_internal} (insn_list 46 (nil))
(expr_list:REG_UNUSED (scratch:HI)
(expr_list:REG_NO_CONFLICT (reg/v:SI 54 [ rad ])
(nil))))
lib_b16sin.c:110: confused by earlier errors, bailing out
There are several ways that this error could be fixed:
1. Increase the number of soft registers (i.e., "fake" registers defined
at fixed memory locations). This can be done by adding something like
-msoft-reg-count=4 to the CFLAGS. This approach was not taken
because:
- This slows hcs12 performance
- All of these soft registers wouil have to be saved and restored
on every interrupt and context switch.
2. Lowering the optimization level by dropping -Os to -O2 or, more likely,
by removing -fomit-frame-pointer. Also not desireable becauase 99% of the
files that do not have this problem also increase in size. Special case
compilation with reduced optimization levels just for the files that need
it could be done, but this would complicate the make system.
3. Restructuring files to reduce the complexity. If you add local variables
to hold intermediate computational results, this error can be eliminated.
This is the approach taken in NuttX. It has disadvantages only in that
(1) it takes some effort and good guessing to eliminate the problem, and (2)
the problem is not really eliminated -- it can and will re-occur when files
are changed or new files are added.
4. Many files are built that are needed by DEM09S12NE64. Another very simple
option if those problem files are needed is to just remove the offending
files from the Make.defs file so that they no longer cause a problem.
HCS12/NE64BADGE-specific Configuration Options
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
be set to:
CONFIG_ARCH=hc
CONFIG_ARCH_family - For use in C code:
CONFIG_ARCH_HC=y
CONFIG_ARCH_architecture - For use in C code:
CONFIG_ARCH_HCS12=y
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
CONFIG_ARCH_CHIP=mc92s12nec64
CONFIG_ARCH_CHIP_name - For use in C code
CONFIG_ARCH_CHIP_MCS92S12NEC64
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
hence, the board that supports the particular chip or SoC.
CONFIG_ARCH_BOARD=ne64badge
CONFIG_ARCH_BOARD_name - For use in C code
CONFIG_ARCH_BOARD_NE64BADGE (for the Future Electronics Group NE64 Badge)
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
of delay loops
CONFIG_ENDIAN_BIG - define if big endian (default is little
endian)
CONFIG_DRAM_SIZE - Describes the installed RAM.
CONFIG_DRAM_START - The start address of installed RAM
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
have LEDs
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
stack. If defined, this symbol is the size of the interrupt
stack in bytes. If not defined, the user task stacks will be
used during interrupt handling.
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
cause a 100 second delay during boot-up. This 100 second delay
serves no purpose other than it allows you to calibratre
CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure
the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
the delay actually is 100 seconds.
GPIO Interrupts
CONFIG_GPIO_IRQ - Enable general support for GPIO IRQs
CONFIG_HCS12_PORTG_INTS - Enable PortG IRQs
CONFIG_HCS12_PORTH_INTS - Enable PortH IRQs
CONFIG_HCS12_PORTJ_INTS - Enable PortJ IRQs
HCS12 build options:
CONFIG_HCS12_SERIALMON - Indicates that the target systems uses
the Freescale serial bootloader.
CONFIG_HCS12_NONBANKED - Indicates that the target systems does not
support banking. Only short calls are made; one fixed page is
presented the the paging window. Only 48Kb of FLASH is usable
in this configuration: pages 3e, 3d, then 3f will appear as a
contiguous address space in memory.
HCS12 Sub-system support
CONFIG_HCS12_SCI0
CONFIG_HCS12_SCI1
HCS12 specific device driver settings:
CONFIG_SCIn_SERIAL_CONSOLE - selects SCIn for the console and ttys0
(default is the SCI0).
CONFIG_SCIn_RXBUFSIZE - Characters are buffered as received.
This specific the size of the receive buffer
CONFIG_SCIn_TXBUFSIZE - Characters are buffered before
being sent. This specific the size of the transmit buffer
CONFIG_SCIn_BAUD - The configure BAUD of the UART.
CONFIG_SCIn_BITS - The number of bits. Must be either 7 or 8.
CONFIG_SCIn_PARTIY - 0=no parity, 1=odd parity, 2=even parity, 3=mark 1, 4=space 0
CONFIG_SCIn_2STOP - Two stop bits
Configurations
^^^^^^^^^^^^^^
Each Freescale HCS12 configuration is maintained in a sudirectory and
can be selected as follow:
cd tools
./configure.sh ne64badge/<subdir>
cd -
. ./setenv.sh
Where <subdir> is one of the following:
ostest:
This configuration directory, performs a simple OS test using
examples/ostest.