272 lines
6.9 KiB
YAML
272 lines
6.9 KiB
YAML
# Common configuration for PX4 autopilot
|
|
#
|
|
# node:
|
|
startup_px4_usb_quirk: true
|
|
|
|
# --- system plugins ---
|
|
|
|
# sys_status & sys_time connection options
|
|
conn:
|
|
heartbeat_rate: 1.0 # send hertbeat rate in Hertz
|
|
timeout: 10.0 # hertbeat timeout in seconds
|
|
timesync_rate: 10.0 # TIMESYNC rate in Hertz (feature disabled if 0.0)
|
|
system_time_rate: 1.0 # send system time to FCU rate in Hertz (disabled if 0.0)
|
|
|
|
# sys_status
|
|
sys:
|
|
min_voltage: 10.0 # diagnostics min voltage
|
|
disable_diag: false # disable all sys_status diagnostics, except heartbeat
|
|
|
|
# sys_time
|
|
time:
|
|
time_ref_source: "fcu" # time_reference source
|
|
timesync_mode: MAVLINK
|
|
timesync_avg_alpha: 0.6 # timesync averaging factor
|
|
|
|
# --- mavros plugins (alphabetical order) ---
|
|
|
|
# 3dr_radio
|
|
tdr_radio:
|
|
low_rssi: 40 # raw rssi lower level for diagnostics
|
|
|
|
# actuator_control
|
|
# None
|
|
|
|
# command
|
|
cmd:
|
|
use_comp_id_system_control: false # quirk for some old FCUs
|
|
|
|
# dummy
|
|
# None
|
|
|
|
# ftp
|
|
# None
|
|
|
|
# global_position
|
|
global_position:
|
|
frame_id: "map" # origin frame
|
|
child_frame_id: "base_link" # body-fixed frame
|
|
rot_covariance: 99999.0 # covariance for attitude?
|
|
gps_uere: 1.0 # User Equivalent Range Error (UERE) of GPS sensor (m)
|
|
use_relative_alt: true # use relative altitude for local coordinates
|
|
tf:
|
|
send: false # send TF?
|
|
frame_id: "map" # TF frame_id
|
|
global_frame_id: "earth" # TF earth frame_id
|
|
child_frame_id: "base_link" # TF child_frame_id
|
|
|
|
# imu_pub
|
|
imu:
|
|
frame_id: "base_link"
|
|
# need find actual values
|
|
linear_acceleration_stdev: 0.0003
|
|
angular_velocity_stdev: 0.0003490659 // 0.02 degrees
|
|
orientation_stdev: 1.0
|
|
magnetic_stdev: 0.0
|
|
|
|
# local_position
|
|
local_position:
|
|
frame_id: "map"
|
|
tf:
|
|
send: false
|
|
frame_id: "map"
|
|
child_frame_id: "base_link"
|
|
send_fcu: false
|
|
|
|
# param
|
|
# None, used for FCU params
|
|
|
|
# rc_io
|
|
# None
|
|
|
|
# safety_area
|
|
safety_area:
|
|
p1: {x: 1.0, y: 1.0, z: 1.0}
|
|
p2: {x: -1.0, y: -1.0, z: -1.0}
|
|
|
|
# setpoint_accel
|
|
setpoint_accel:
|
|
send_force: false
|
|
|
|
# setpoint_attitude
|
|
setpoint_attitude:
|
|
reverse_thrust: false # allow reversed thrust
|
|
use_quaternion: true # enable PoseStamped topic subscriber
|
|
tf:
|
|
listen: false # enable tf listener (disable topic subscribers)
|
|
frame_id: "map"
|
|
child_frame_id: "target_attitude"
|
|
rate_limit: 50.0
|
|
|
|
setpoint_raw:
|
|
thrust_scaling: 1.0 # used in setpoint_raw attitude callback.
|
|
# Note: PX4 expects normalized thrust values between 0 and 1, which means that
|
|
# the scaling needs to be unitary and the inputs should be 0..1 as well.
|
|
|
|
# setpoint_position
|
|
setpoint_position:
|
|
tf:
|
|
listen: false # enable tf listener (disable topic subscribers)
|
|
frame_id: "map"
|
|
child_frame_id: "target_position"
|
|
rate_limit: 50.0
|
|
mav_frame: LOCAL_NED
|
|
|
|
# setpoint_velocity
|
|
setpoint_velocity:
|
|
mav_frame: LOCAL_NED
|
|
|
|
# vfr_hud
|
|
# None
|
|
|
|
# waypoint
|
|
mission:
|
|
pull_after_gcs: true # update mission if gcs updates
|
|
|
|
# --- mavros extras plugins (same order) ---
|
|
|
|
# adsb
|
|
# None
|
|
|
|
# debug_value
|
|
# None
|
|
|
|
# distance_sensor
|
|
## Currently available orientations:
|
|
# Check http://wiki.ros.org/mavros/Enumerations
|
|
##
|
|
distance_sensor:
|
|
hrlv_ez4_pub:
|
|
id: 0
|
|
frame_id: "hrlv_ez4_sonar"
|
|
orientation: PITCH_270 # RPY:{0.0, 270.0, 0.0} - downward-facing
|
|
field_of_view: 0.0 # XXX TODO
|
|
send_tf: true
|
|
sensor_position: {x: 0.0, y: 0.0, z: -0.1}
|
|
lidarlite_pub:
|
|
id: 1
|
|
frame_id: "lidarlite_laser"
|
|
orientation: PITCH_270
|
|
field_of_view: 0.0 # XXX TODO
|
|
send_tf: true
|
|
sensor_position: {x: 0.0, y: 0.0, z: -0.1}
|
|
sonar_1_sub:
|
|
subscriber: true
|
|
frame_id: "sonar_link"
|
|
id: 2
|
|
orientation: PITCH_270
|
|
laser_1_sub:
|
|
subscriber: true
|
|
id: 3
|
|
orientation: PITCH_270
|
|
|
|
# image_pub
|
|
image:
|
|
frame_id: "px4flow"
|
|
|
|
# fake_gps
|
|
fake_gps:
|
|
# select data source
|
|
use_mocap: true # ~mocap/pose
|
|
mocap_transform: false # ~mocap/tf instead of pose
|
|
use_vision: false # ~vision (pose)
|
|
# origin (default: Zürich)
|
|
geo_origin:
|
|
lat: 47.3667 # latitude [degrees]
|
|
lon: 8.5500 # longitude [degrees]
|
|
alt: 408.0 # altitude (height over the WGS-84 ellipsoid) [meters]
|
|
eph: 2.0
|
|
epv: 2.0
|
|
satellites_visible: 5 # virtual number of visible satellites
|
|
fix_type: 3 # type of GPS fix (default: 3D)
|
|
tf:
|
|
listen: false
|
|
send: false # send TF?
|
|
frame_id: "map" # TF frame_id
|
|
child_frame_id: "fix" # TF child_frame_id
|
|
rate_limit: 10.0 # TF rate
|
|
gps_rate: 5.0 # GPS data publishing rate
|
|
|
|
# landing_target
|
|
landing_target:
|
|
listen_lt: false
|
|
mav_frame: "LOCAL_NED"
|
|
land_target_type: "VISION_FIDUCIAL"
|
|
image:
|
|
width: 640 # [pixels]
|
|
height: 480
|
|
camera:
|
|
fov_x: 2.0071286398 # default: 115 [degrees]
|
|
fov_y: 2.0071286398
|
|
tf:
|
|
send: true
|
|
listen: false
|
|
frame_id: "landing_target"
|
|
child_frame_id: "camera_center"
|
|
rate_limit: 10.0
|
|
target_size: {x: 0.3, y: 0.3}
|
|
|
|
# mocap_pose_estimate
|
|
mocap:
|
|
# select mocap source
|
|
use_tf: false # ~mocap/tf
|
|
use_pose: true # ~mocap/pose
|
|
|
|
# odom
|
|
odometry:
|
|
in:
|
|
frame_id: "odom"
|
|
child_frame_id: "base_link"
|
|
frame_tf:
|
|
local_frame: "local_origin_ned"
|
|
body_frame_orientation: "flu"
|
|
out:
|
|
frame_tf:
|
|
# available: check MAV_FRAME odometry local frames in
|
|
# https://mavlink.io/en/messages/common.html
|
|
local_frame: "vision_ned"
|
|
# available: ned, frd or flu (though only the tf to frd is supported)
|
|
body_frame_orientation: "frd"
|
|
|
|
# px4flow
|
|
px4flow:
|
|
frame_id: "px4flow"
|
|
ranger_fov: 0.118682 # 6.8 degrees at 5 meters, 31 degrees at 1 meter
|
|
ranger_min_range: 0.3 # meters
|
|
ranger_max_range: 5.0 # meters
|
|
|
|
# vision_pose_estimate
|
|
vision_pose:
|
|
tf:
|
|
listen: false # enable tf listener (disable topic subscribers)
|
|
frame_id: "map"
|
|
child_frame_id: "vision_estimate"
|
|
rate_limit: 10.0
|
|
|
|
# vision_speed_estimate
|
|
vision_speed:
|
|
listen_twist: true # enable listen to twist topic, else listen to vec3d topic
|
|
twist_cov: true # enable listen to twist with covariance topic
|
|
|
|
# vibration
|
|
vibration:
|
|
frame_id: "base_link"
|
|
|
|
# wheel_odometry
|
|
wheel_odometry:
|
|
count: 2 # number of wheels to compute odometry
|
|
use_rpm: false # use wheel's RPM instead of cumulative distance to compute odometry
|
|
wheel0: {x: 0.0, y: -0.15, radius: 0.05} # x-, y-offset (m,NED) and radius (m)
|
|
wheel1: {x: 0.0, y: 0.15, radius: 0.05} # x-, y-offset (m,NED) and radius (m)
|
|
send_raw: true # send wheel's RPM and cumulative distance (~/wheel_odometry/rpm, ~/wheel_odometry/distance)
|
|
send_twist: false # send geometry_msgs/TwistWithCovarianceStamped instead of nav_msgs/Odometry
|
|
frame_id: "map" # origin frame
|
|
child_frame_id: "base_link" # body-fixed frame
|
|
vel_error: 0.1 # wheel velocity measurement error 1-std (m/s)
|
|
tf:
|
|
send: true
|
|
frame_id: "map"
|
|
child_frame_id: "base_link"
|
|
|
|
# vim:set ts=2 sw=2 et:
|