aepko/Ardupilot2
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
22,167 Commits 72 Branches 509 Tags 683 MiB
f8540f1a80
Commit Graph

11313 Commits

Author SHA1 Message Date
Andrew Tridgell
54f7aeed83 RC_Channel: extend channel mapping to 16 channels 
this gives more flexibility, no reason to limit it to 8
 2016-04-23 21:03:46 +10:00
Andrew Tridgell
3a5e4c80ca AP_Mission: support DO_VTOL_TRANSITION command 
first 16 bit command ID
 2016-04-23 21:03:46 +10:00
Andrew Tridgell
09c3c36c00 AP_Mission: allow for 16 bit command IDs 
this uses command ID 0 to allow for 16 bit command IDs. When used it
limits the content to just 10 bytes.
 2016-04-23 21:03:45 +10:00
Tom Pittenger
bcc2838a37 APM_OBC: changed param RC_FAIL_MS to RC_FAIL_TIME in float seconds 2016-04-22 16:05:07 -07:00
Tom Pittenger
f2d744b7c9 APM_OBC: non-functional change - cleaned up logic 2016-04-22 16:05:02 -07:00
James Stoyell
48a7363608 APM_OBC: Added params for AUVSI student competition 2016-04-22 11:48:31 -07:00
Francisco Ferreira
af6d8e3c36 AP_Param: explicitly cast to float to avoid Clang warning 
/home/travis/build/ArduPilot/ardupilot/libraries/AP_Param/AP_Param.h:542:22: warning: using floating point absolute value function 'fabsf' when argument is of integer type [-Wabsolute-value]
        bool force = fabsf(_value - v) < FLT_EPSILON;
 2016-04-22 17:33:06 +01:00
Randy Mackay
71692044f8 AP_Parachute: resolve compile warning re init order 2016-04-22 21:32:35 +09:00
Tom Pittenger
431b3c7160 AP-TECS: constrain proportion to 0-1 for spdweight scale so it doesn't grow backup after land point 2016-04-21 21:31:02 -07:00
Tom Pittenger
25c3367341 AP_L1 - add a stale flag 
threading bug fix. When a mission wp updates, but the L1 controller had not yet, the data is stale. Example, On Plane when NAV_LAND starts for a moment your xtrack and bearing is most likely bear zero regardless if you have a big turn or not until 10 Hz later when the update() gets called and updates those values with correct values for the new waypoint.
 2016-04-21 21:30:57 -07:00
Tom Pittenger
2ce964c8ac AP_L1_Controller: add accessor for xtrack_error_integrator 2016-04-21 21:30:54 -07:00
Tom Pittenger
595badce3e AP_TECS: rely on single flag for all land stage differences 
recent fixes in Plane have made the stage more accurate so exceptions/hacks are no longer needed to differentiate between knowing if executing NAV_LAND vs being in stage_approach.
 2016-04-21 21:30:52 -07:00
Tom Pittenger
0af878703f AP_TECS: move target land_airspeed logic to top layer 2016-04-21 21:30:49 -07:00
Tom Pittenger
525c7b24e3 AP_TECS: created accessor for TECS_LAND_ARSPD param 2016-04-21 21:30:48 -07:00
Andrew Tridgell
0af322e90d HAL_PX4: added comment on oneshot 2016-04-22 13:50:05 +10:00
Andrew Tridgell
5ce7ae71a7 HAL_PX4: fixed enabling oneshot on a subset of motors 2016-04-22 13:24:24 +10:00
Andrew Tridgell
fd7c87e629 AP_Motors: allow enabling oneshot on a subset of motors 2016-04-22 13:24:04 +10:00
Andrew Tridgell
bcd0d48ced HAL_PX4: fixed non-contiguous motor outputs 
this fixes tricopter with chan3 never set
 2016-04-22 11:51:08 +10:00
Andrew Tridgell
180a7905e5 SITL: make Z down in motors 2016-04-22 10:45:55 +10:00
Andrew Tridgell
46f368f17d HAL_SITL: support fireflyy6 as quadplane 2016-04-22 10:28:15 +10:00
Andrew Tridgell
aa80851138 SITL: support fireflyY6 quadplane model 2016-04-22 10:28:15 +10:00
Andrew Tridgell
8880635fe1 SITL: support vtail and elevon planes in builtin plane sim 
remove old tiltrotor in favor of new tiltrotor code
 2016-04-22 10:28:15 +10:00
Andrew Tridgell
b4d24d8e03 SITL: fixed rotations of motors by large angles 2016-04-22 10:28:15 +10:00
Andrew Tridgell
6165c42535 AP_Math: added from_axis_angle() method on Matrix3f 
for arbitrary rotations in simulator
 2016-04-22 10:28:15 +10:00
Andrew Tridgell
f2c63e24c5 AP_Motors: allow tricopter motor 7 to be moved to any output 2016-04-22 08:32:03 +10:00
Tom Pittenger
0e775f595d AP_BattMonitor: make param BATT_WATT_MAX plane only 2016-04-21 13:59:45 -07:00
Rimvydas Naktinis
df922dacfa Plane: Suppress throttle when parachute release initiated, not after release. 2016-04-21 09:53:22 -07:00
Andrew Tridgell
21fb38da8f HAL_SITL: support Y6 frame 2016-04-21 21:11:46 +10:00
Andrew Tridgell
71ca534ec6 SITL: added Y6 frame 2016-04-21 21:11:38 +10:00
Andrew Tridgell
41b3cb2ff7 HAL_SITL: support tri sim 2016-04-21 20:29:58 +10:00
Andrew Tridgell
49822effca SITL: added tricopter simulator 2016-04-21 20:29:49 +10:00
Andrew Tridgell
c262d6a1b4 SITL: break up multicopter into Motor/Frame/Multicopter classes 
ready for more tiltrotors
 2016-04-21 19:56:44 +10:00
Michael du Breuil
fd51c3cc16 AP_TECS: Remove hgt_afe from update_50hz() 2016-04-21 17:03:00 +10:00
Michael du Breuil
475e731e34 AP_SpdHgt_Control: Remove hgt_afe from update_50hz() 2016-04-21 17:03:00 +10:00
Andrew Tridgell
c765979f9a DataFlash: expose the number of lost log messages 
will be logged in PM message
 2016-04-21 16:45:02 +10:00
Andrew Tridgell
ced4cce358 AP_Scheduler: added optional perf counters at SCHED_DEBUG >= 4 2016-04-21 16:45:02 +10:00
Randy Mackay
4419b3c617 AHRS_NavEKF: fix get_position by using ekf origin 
The EKF's getPosNED returns a vertical position relative to the EKF origin but previously this function was using it as if it was relative to ahrs's home
 2016-04-21 11:23:07 +10:00
Jonathan Challinger
a7f959e6f9 AP_Notify: add ToneAlarm_PX4_Solo 2016-04-21 10:05:36 +10:00
Jonathan Challinger
d2ca2d2e0e AP_Notify: change OREOLED config to ifdef 2016-04-21 10:04:37 +10:00
Jonathan Challinger
06ccf88cc9 AP_BattMonitor_SMBus: set AP_Notify powering_off flag 2016-04-21 10:04:37 +10:00
Jonathan Challinger
dba55182af AP_Notify: add flags.powering_off 2016-04-21 10:04:37 +10:00
Andrew Tridgell
ac60901b0c AP_NavEKF2: use vector comparison for new mag vector 2016-04-21 09:56:22 +10:00
Jonathan Challinger
6a5f1c0bec AP_AHRS_NavEKF: reflect changes to getMagOffsets 2016-04-21 09:53:03 +10:00
Jonathan Challinger
97112ccd44 AP_NavEKF2: check mag instance id when returning mag offsets 2016-04-21 09:51:41 +10:00
Jonathan Challinger
6938e3d57b AP_NavEKF: check mag instance id when returning mag offsets 2016-04-21 09:51:41 +10:00
Jonathan Challinger
1185cd1be7 AP_NavEKF2: move getMagOffsets into outputs 2016-04-21 09:51:41 +10:00
Jonathan Challinger
acfaafe276 AP_NavEKF2: detect changes to magnetometer offset parameters and reset states 2016-04-21 09:51:41 +10:00
Andrew Tridgell
835c0b1759 HAL_SITL: follow sqrt law to 60m for wind 
this makes testing wind in landings more useful
 2016-04-20 17:26:16 +10:00
Andrew Tridgell
57aef8e1e9 SITL: added basic wind support in multicopter, plane and quadplane 
this adds non-turbulent wind support for the built-in simulators. I
added it primarily for quadplane testing, but it should also be useful
for multicopter navigation testing.
 2016-04-20 11:48:37 +10:00
Andrew Tridgell
28aa4c40cc HAL_PX4: fixed order of wifi and frsky on FMUv4 
thanks to OXINARF for noticing!
 2016-04-20 10:23:11 +10:00
Andrew Tridgell
4a35f8e9fc HAL_PX4: fixed comments for FMUv4 uarts 2016-04-20 10:08:48 +10:00
Andrew Tridgell
4ef977c68b HAL_SITL: fixed initial path for uartF 2016-04-20 10:08:35 +10:00
Andrew Tridgell
ef180710db AP_SerialManager: fixed doc strings 2016-04-20 10:03:45 +10:00
Andrew Tridgell
62986957b4 GCS_MAVLink: raise number of mavlink buffers to 5 2016-04-20 09:39:50 +10:00
Andrew Tridgell
0baf8ee2eb AP_SerialManager: added SERIAL5_* support 2016-04-20 09:39:49 +10:00
Andrew Tridgell
6120631977 HAL_VRBRAIN: added uartF 2016-04-20 09:39:49 +10:00
Andrew Tridgell
0d27409511 HAL_SITL: added uartF 2016-04-20 09:39:49 +10:00
Andrew Tridgell
9c9f66e5f3 HAL_QURT: added uartF 2016-04-20 09:39:49 +10:00
Andrew Tridgell
18ccaf7e2b HAL_PX4: added uartF 2016-04-20 09:39:49 +10:00
Andrew Tridgell
c7dabad02c HAL_Linux: added uartF 2016-04-20 09:39:49 +10:00
Andrew Tridgell
543604731f HAL_FLYMAPLE: added uartF 2016-04-20 09:39:49 +10:00
Andrew Tridgell
a78e23d6fb HAL_Empty: added uartF 2016-04-20 09:39:49 +10:00
Andrew Tridgell
76868dd070 AP_HAL: added uartF 2016-04-20 09:39:48 +10:00
Andrew Tridgell
2a214f1e46 AP_GPS: support a wider variety of NMEA receivers 
some reeivers use a different talker ID. This allows us to accept
them.
 2016-04-18 15:30:17 +10:00
Lucas De Marchi
0d9b9433da GCS_MAVLink: fix home position unit 
As per documentation the home position is in mm. Since location stores
it in cm, convert to mm before sending.
 2016-04-18 13:07:45 +10:00
Michael du Breuil
bb7cf6c0b6 AP_Math: Update location_sanitize to sanitize for lat/lng 2016-04-17 19:00:03 -07:00
Francisco Ferreira
b7135175c9 AC_AttitudeControl: fix heli documentation 2016-04-18 07:40:34 +09:00
Andrew Tridgell
8586b0ae5a APM_Control: added tuning accessors 2016-04-16 20:37:33 +10:00
Andrew Tridgell
a731caa4ab HLA_PX4: prevent timer disturbance in oneshot mode 2016-04-16 18:52:31 +10:00
Andrew Tridgell
6df4d11d3f AP_Motors: ensure OneShot125 is within 125 to 250usec 2016-04-16 18:52:12 +10:00
Andrew Tridgell
d9d6f87195 HAL_PX4: fixed bug in pwm send code 
many thanks to Oxinarf for spotting this!
 2016-04-16 08:32:04 +10:00
Andrew Tridgell
c9dfccfb26 HAL_PX4: improved oneshot support 
this now supports oneshot properly on both IO and FMU
 2016-04-16 07:30:44 +10:00
Andrew Tridgell
2304c41f44 AP_BoardConfig: use hal.rcout->enable_sbus_out() 2016-04-16 07:30:43 +10:00
Andrew Tridgell
6f284d673a HAL_PX4: enable oneshot support on px4io 2016-04-16 07:30:43 +10:00
Andrew Tridgell
b94e577cb8 AP_HAL: added enable_sbus_out() call in RCOutput 2016-04-16 07:30:43 +10:00
Lucas De Marchi
ff10d1136c AP_GPS: reorganize includes 
Due to the way the headers are organized a single change in a
AP_GPS backend would trigger a rebuild for most of the files in the
project. Time could be saved by using ccache (since most of the things
didn't change) but we can do better, i.e.  re-organize
the headers so we don't have to re-build everything.

This makes internal headers internal and then other libraries only
depend on the AP_GPS.h header.
 2016-04-14 21:01:51 -03:00
Andrew Tridgell
e83a3d8185 AP_Camera: clearer parameter docs for trigger pin 2016-04-15 09:33:47 +10:00
Andrew Tridgell
9f31fbb895 AP_Camera: support fast timer capture on AUX4 on Pixhawk 
microsecond capture of hot-shoe
 2016-04-15 09:28:51 +10:00
Andrew Tridgell
5b8401cbbc AP_BoardConfig: allow setup of more complex modes for aux pins on PX4 
this allows for setting up of timer capture pins
 2016-04-15 09:23:46 +10:00
Paul Riseborough
1ecc206eee AP_NavEKF2: Allow use in planes without a magnetometer 
Implements the following techniques to enable planes to operate without magnetometers.

1) When on ground with mag use inhibited, a synthetic heading equal to current heading is fused to prevent uncontrolled covariance growth.
2) When transitioning to in-flight, the delta between inertial and GPS velocity vector is used to align the yaw.
3) The yaw gyro bias state variance is reset following an in-flight heading reset to enable the yaw gyro bias to be learned faster.
 2016-04-15 08:31:47 +10:00
Peter Barker
daa210729c AP_HAL_PX4: correct systemid output for PX4v4 2016-04-14 13:40:27 -07:00
Jonathan Challinger
18240107f0 AP_AHRS_NavEKF: add getGpsGlitchStatus 2016-04-14 12:24:04 +09:00
Jonathan Challinger
a0e291bf89 DataFlash: add reason to MODE 2016-04-14 12:24:04 +09:00
Andrew Tridgell
16b3fe75d1 AP_RSSI: default to analog RSSI on pixracer 2016-04-14 11:13:47 +10:00
pepevalbe
abb667fac3 AP_Notify: enable/disable buzzer in Linux based boards 2016-04-14 08:59:11 +09:00
pepevalbe
c00cbcf076 AP_Notify: enable/disable buzzer in PX4 based boards 2016-04-14 08:59:08 +09:00
pepevalbe
c9862b1502 AP_Notify: New parameter to enable/disable buzzer 2016-04-14 08:59:06 +09:00
Grant Morphett
5861b754cc Rover: fixing a bug the Rover simulation 
Just a small change to ensure the max_wheel_turn parameter is used
instead of a hard coded value.
 2016-04-14 08:55:04 +09:00
mirkix
0366bce9c1 AP_SerialManager: Fix FrSky baudrate comment 2016-04-14 08:46:49 +09:00
Andrew Tridgell
fe2065cd72 AP_Motors: rename MOT_PWM_MODE to MOT_PWM_TYPE 
Randy prefers TYPE
 2016-04-14 08:05:07 +10:00
Andrew Tridgell
c3546dfbb0 AP_BoardConfig: default to 6 PWM on FMUv4 
less likely to use relays
 2016-04-14 08:05:06 +10:00
Andrew Tridgell
8b6322082e AP_SerialManager: default wifi port to MAVLink at 921600 on Pixracer 2016-04-14 08:05:06 +10:00
Andrew Tridgell
8695668da3 HAL_PX4: enable wifi port on FMUv4 2016-04-14 08:05:06 +10:00
Andrew Tridgell
5922e67785 HAL_PX4: allow sbus output on channels beyond BRD_PWM_COUNT 2016-04-14 08:05:06 +10:00
Andrew Tridgell
759b0d6629 HAL_PX4: only support oneshot on FMU outputs for now 
oneshot on PX4IO gives some very weird results. I think it is doable,
but will take a bit more work
 2016-04-14 08:05:06 +10:00
Andrew Tridgell
f54bcc6c7f AP_Motors: added oneshot support via MOT_PWM_MODE 
MOT_PWM_MODE=0 is normal
MOT_PWM_MODE=1 is oneshot
MOT_PWM_MODE=2 is oneshot125
 2016-04-14 08:05:05 +10:00
Andrew Tridgell
934b4dd475 HAL_PX4: support OneShot on PX4 
this greatly lowers output latency
 2016-04-14 08:05:05 +10:00
Andrew Tridgell
e24d600e78 AP_HAL: added hal.rcout->set_output_mode() 2016-04-14 08:05:05 +10:00
Andrew Tridgell
36528965f7 AP_BoardConfig: added 7s timeout on uavcan startup 2016-04-14 08:05:05 +10:00
Andrew Tridgell
1d5deed72a HAL_PX4: fixed build for new px4 param functions 2016-04-14 08:05:04 +10:00
Randy Mackay
8d77bdec15 AP_MotorsMulti: minor comment fix 2016-04-14 05:45:24 +09:00
Lucas De Marchi
affa759fb4 AP_GPS: add missing override 2016-04-13 11:27:19 -03:00
Michael du Breuil
bd6aa982e7 AP_Arming: Fetch GPS configuration failure reason 2016-04-13 11:24:01 -03:00
Michael du Breuil
2538c17ee0 AP_GPS: add fetching of gps configuration failure reasons 2016-04-13 11:24:01 -03:00
Andrew Tridgell
d03a232659 AC_AttitudeControl: added set_limit_accel_xy() API 
for preventing integrator buildup
 2016-04-10 22:01:18 +10:00
Andrew Tridgell
ed2f26d7b8 RC_Channel: allow for pass-thru from low channels to any channel 
this makes it easier to setup things like ignition cut or bottle drop
with a 8 channel radio
 2016-04-10 20:33:12 +10:00
hiro2233
7814841cd6 AP_HAL: Add RCOutput interactive example with Menu 2016-04-09 07:01:35 -07:00
Ricardo de Almeida Gonzaga
5bd034a5a8 Global: start using cmath instead of math.h 2016-04-05 21:06:19 -07:00
Ricardo de Almeida Gonzaga
60d141c717 missing: add cmath 2016-04-05 20:44:15 -07:00
Andrew Tridgell
9db618c73c AP_AHRS: disable EKF1 for plane 
we are running too close to the 1MByte limit for pixhawk. This
recovers nearly 100kbyte of flash
 2016-04-04 11:08:03 +10:00
Andrew Tridgell
7dcd17a2fa SITL: make multicopter motors only effective above 10% 2016-04-02 22:45:05 +11:00
Andrew Tridgell
6bff07397e AP_Math: added linear_interpolate() function 2016-04-02 22:44:47 +11:00
Andrew Tridgell
602ff03c41 AP_TECS: limit both negative and positive pitch on quadplane transition 
this makes for smoother auto takeoff
 2016-04-02 19:53:16 +11:00
Andrew Tridgell
86416e8f05 AP_Param: added set_default_by_name() 2016-04-01 16:39:51 +11:00
Andrew Tridgell
0530af93aa AP_Param: allow top level parameters to be pointers 
this will allow for the attitude_control variable in quadplane to be a
pointer
 2016-04-01 16:16:03 +11:00
Randy Mackay
87399776a3 AC_PosControl: hover throttle default to 0.5 2016-04-01 11:59:30 +09:00
Randy Mackay
f6eabfdab2 AP_MotorsMulticopter: formatting fixes 2016-04-01 11:59:30 +09:00
Randy Mackay
6807b961e2 AP_MotorsMulticopter: protect against div-by-zero if MOT_SPIN_ARMED is zero 2016-04-01 11:59:30 +09:00
Randy Mackay
b39798ad90 AP_Motors: remove unused DESIRED_SPIN_MIN_THROTTLE 2016-04-01 11:59:30 +09:00
Randy Mackay
dc86e1472c AP_MotorsTri: protect against div-by-zero if MOT_YAW_SV_ANGLE param was set to 90 2016-04-01 11:59:30 +09:00
Randy Mackay
9b5b6f3779 AP_MotorsHeli: constrain filtered throttle 
This is required because we have removed the constraint on the throttle input.  This also insures that there is no lag caused by the filtered throttle straying far outside the 0 to 1 range
 2016-04-01 11:59:30 +09:00
Randy Mackay
b4a61e6ccf AP_Motors: remove constrain on throttle input 
This constraint is redundant because we already constrain the filtered throttle
 2016-04-01 11:59:30 +09:00
Leonard Hall
fce426409e AP_MotorsTri: fix stab patch 2016-04-01 11:59:30 +09:00
Randy Mackay
49562c5ca3 AP_MotorsMulticopter: reduce num bits used for spool-up-down-mode 2016-04-01 11:59:30 +09:00
Randy Mackay
3ee88fd8c7 AP_MotorsCoax: remove output_min 
This is now implemented by parent AP_MotorsMulticopter
 2016-04-01 11:59:30 +09:00
Randy Mackay
8566a61660 AP_MotorsSingle: remove output_min 
This is now implemented by parent AP_MotorsMulticopter
 2016-04-01 11:59:30 +09:00
Randy Mackay
8621774040 AP_MotorsTri: remove output_min 
This is now implemented by parent AP_MotorsMulticopter
 2016-04-01 11:59:30 +09:00
Randy Mackay
f4d94806e5 AP_MotorsMatrix: remove output_min 
This is now implemented by parent AP_MotorsMulticopter
 2016-04-01 11:59:30 +09:00
Randy Mackay
b4b33db79b AP_MotorsMulticopter: promote output_min from Matrix class 2016-04-01 11:59:30 +09:00
Randy Mackay
2e8acf1f74 AP_MotorsHeli: calculate_scalars made protected 
No functional change
 2016-04-01 11:59:30 +09:00
Randy Mackay
165d739b45 AC_AttControl_Heli: roll, pitch, yaw passthrough to motors in -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay
344d86a095 AC_AttControl_Heli: fix parameter description 2016-04-01 11:59:30 +09:00
Randy Mackay
685be4083c AC_AttControl_Heli: remove unnecessary cast to AC_HELI_PID 2016-04-01 11:59:30 +09:00
Randy Mackay
6c91e50f8c AC_AttControl_Heli: remove scaling for centi-degrees and legacy motor input 2016-04-01 11:59:30 +09:00
Randy Mackay
32d238187f AC_AttControl_Heli: get_althold_lean_angle_max in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay
db04dddba5 AC_AttControl_Heli: adjust rate gain param descriptions 2016-04-01 11:59:30 +09:00
Randy Mackay
35c6ea994d AC_AttControl_Multi: fix parameter descriptions 2016-04-01 11:59:30 +09:00
Randy Mackay
ace58d114f AC_AttControl_Multi: reduce rate gain defaults 2016-04-01 11:59:30 +09:00
Leonard Hall
b30606bb22 AC_AttControl: remove scaling for centi-degrees and legacy motor input 2016-04-01 11:59:30 +09:00
Randy Mackay
7f2c1f830f AC_AttControl_Heli: add rate PIDs 2016-04-01 11:59:30 +09:00
Randy Mackay
5edc16dfb4 AC_AttControl_Multi: add rate PIDs 2016-04-01 11:59:30 +09:00
Randy Mackay
75042e5e27 AC_AttControl: remove rate PIDs 2016-04-01 11:59:30 +09:00
Randy Mackay
17c9db08f3 AC_AttControl: add angle and rate PIDs 2016-04-01 11:59:30 +09:00
Randy Mackay
de537390c2 AC_HELI_PID: adjust parameter descriptions 
ILMI range is now 0 to 1
 2016-04-01 11:59:30 +09:00
Randy Mackay
3465f05bec AC_HELI_PID: shorten FILT_HZ to FILT, I_L_MIN to ILMI 
Also minor formatting fix
 2016-04-01 11:59:30 +09:00
Randy Mackay
425caeabf7 AC_PI_2D: fix parameter description 2016-04-01 11:59:30 +09:00
Randy Mackay
227e4f86d7 AC_PID: fix parameter description 2016-04-01 11:59:30 +09:00
Randy Mackay
920425567c AC_PID: shorten FILT_HZ to FILT 2016-04-01 11:59:30 +09:00
Randy Mackay
bc1b8f415a AP_Motors: example sketch output limit flags 2016-04-01 11:59:30 +09:00
Randy Mackay
c9055ccdb1 AP_Motors: example sketch tests Single and Coax 2016-04-01 11:59:30 +09:00
Randy Mackay
41c55ffbe7 AP_MotorsTri: use YAW_SV_REV to reverse yaw output 2016-04-01 11:59:30 +09:00
Leonard Hall
13d727c2c6 AP_MotorsTri: add YAW_SV_ANGLE parameter to capture yaw servo lean angle max 2016-04-01 11:59:30 +09:00
Randy Mackay
c939cc1551 AP_MotorsTri: clarify YAW_SV parameter descriptions and comments 2016-04-01 11:59:30 +09:00
Leonard Hall
267513d864 AP_MotorsTri: fixes to output_armed_stabilizing 
Also minor comment fixes
 2016-04-01 11:59:30 +09:00
Leonard Hall
250a444e57 AP_MotorsCoax: fixes to stab patch 
Fix throttle_lower flag
Also some formatting changes
 2016-04-01 11:59:30 +09:00
Randy Mackay
20565580ed AP_MotorsCoax: remove disabling of output ch7 2016-04-01 11:59:30 +09:00
Randy Mackay
63fefae7cf AP_MotorsCoax: use calc_pwm_output_1ot1 instead of local calc_pivot_radio_output 2016-04-01 11:59:30 +09:00
Leonard Hall
840e60c930 AP_MotorsSingle: fixes to stab patch 
Fixes throttle_lower flag
Also some formatting changes
 2016-04-01 11:59:30 +09:00
Randy Mackay
af9b18329c AP_MotorsSingle: use calc_pwm_output_1to1 instead of local calc_pivot_radio_output 2016-04-01 11:59:30 +09:00
Randy Mackay
c4b88aafef AP_MotorsHeli: swash and tail servo objects moved into class 2016-04-01 11:59:30 +09:00
Randy Mackay
4f1e62d551 AP_MotorsHeli: remove reset_radio_passthrough 2016-04-01 11:59:30 +09:00
Randy Mackay
b5593431bf AP_MotorsHeli_Single: replace collective_mid_pwm with collective_mid_pct 2016-04-01 11:59:30 +09:00
Randy Mackay
9790245bf1 AP_MotorsHeli: replace collective_mid_pwm with collective_mid_pct 2016-04-01 11:59:30 +09:00
Randy Mackay
a39bbc5421 AP_MotorsHeli: servo_test in range -1 to 1 2016-04-01 11:59:30 +09:00
Randy Mackay
a42706bdcc AP_Motors: remove unused example sketch to test timing 
This test was only important on the slower AVR boards
 2016-04-01 11:59:30 +09:00
Randy Mackay
a3450b712c AP_Motors: fix example sketch 2016-04-01 11:59:30 +09:00
Leonard Hall
753b72b28c AP_MotorsY6: call normalise_rpy_factors in motor setup 2016-04-01 11:59:30 +09:00
Leonard Hall
13ab3ecfea AP_MotorsQuad: call normalise_rpy_factors in motor setup 2016-04-01 11:59:30 +09:00
Leonard Hall
7ac4fc5569 AP_MotorsOctaQuad: call normalise_rpy_factors in motor setup 2016-04-01 11:59:30 +09:00
Leonard Hall
e182c10625 AP_MotorsOcta: call noramlise_rpy_factors in motor setup 2016-04-01 11:59:30 +09:00
Leonard Hall
733b89cf3c AP_MotorsHexa: call noramlise_rpy_factors in motor setup 2016-04-01 11:59:30 +09:00
Leonard Hall
8f8eb7e214 AP_MotorsMatrix: add normalise_rpy_factors 2016-04-01 11:59:30 +09:00
Randy Mackay
e7ba5ae451 AP_MotorsMulticopter: fix get_hover_throttle_as_high_end_pct 2016-04-01 11:59:30 +09:00
Randy Mackay
4514e8d100 AP_MotorsHeli: remove slow_start 2016-04-01 11:59:30 +09:00
Randy Mackay
c41a5dc3bd AP_MotorsMulticopter: remove slow_start 
This has been replaced with the spool logic feature
 2016-04-01 11:59:30 +09:00
Randy Mackay
b436dde60c AP_Motors: remove slow_start 
This has been replaced with the spool logic feature
 2016-04-01 11:59:30 +09:00
Randy Mackay
e863f0b9c0 AP_MotorsHeli: use AP_Motors set_radio_passthrough in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay
68a6408a23 AP_MotorsMulticopter: remove set_radio_passthrough 
This has been moved up to the AP_Motors class
 2016-04-01 11:59:30 +09:00
Randy Mackay
5ba3a6c536 AP_Motors: add set_radio_passthrough 2016-04-01 11:59:30 +09:00
Randy Mackay
fe4733121d AP_MotorsHeli_Single: ext_gyro_gain in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay
e1e4e37c92 AP_MotorsHeli_Single: use RSC class's get_idle_output function 
No functional change
 2016-04-01 11:59:30 +09:00
Randy Mackay
2cdc5da226 AP_MotorsHeli_Single: rotor speed functions in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay
68945df45d AP_MotorsHeli_Single: write_aux uses 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay
b3334c3ae5 AP_MotorsHeli: rotor speed function in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay
832a226f13 AP_MotorsHeli_RSC: rotor speeds in 0 to 1 range 
Also move recalc_scalers functionality into update_rotor_ramp and update_rotor_runup
 2016-04-01 11:59:30 +09:00
Randy Mackay
4775843e3c AP_MotorsHeli_RSC: add get_idle_output accessor 2016-04-01 11:59:30 +09:00
Randy Mackay
a63dba5b13 AP_MotorsHeli_Single: servo_test becomes protected 2016-04-01 11:59:30 +09:00
Randy Mackay
cefd114964 AP_MotorsHeli_Single: remove unused accessors for tail_type, ext_gyro_gain, phase_angle 2016-04-01 11:59:30 +09:00
Randy Mackay
f2fc39943e AP_MotorsHeli_Single: remove unused delta_phase_angle 2016-04-01 11:59:30 +09:00
Randy Mackay
381f538aca AP_HotorsHeli_Single: remove unused definition 2016-04-01 11:59:30 +09:00
Randy Mackay
27fed39671 AP_MotorsHeli_Single: remove roll_scalar, pitch_scalar 2016-04-01 11:59:30 +09:00
Randy Mackay
756236af35 AP_MotorsHeli: remove unused delta_phase_angle 2016-04-01 11:59:30 +09:00
Randy Mackay
16ac92be82 AP_MotorsHeli: remove unused definitions 2016-04-01 11:59:30 +09:00
Randy Mackay
aeef6692cb AP_MotorsHeli: remove unused roll_scalar, pitch_scalar, collective_range 2016-04-01 11:59:30 +09:00
Randy Mackay
1a690772e1 AP_Motors: example sketch outputs headers 2016-04-01 11:59:30 +09:00
Randy Mackay
361b64f817 AP_Motors: example sketch uses AP_Motors set_desired_spool_state 2016-04-01 11:59:30 +09:00
Randy Mackay
d4998089c8 AP_Motors: example sketch provides roll, pitch, yaw in -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay
93597d152f AP_Motors: example sketch can test helicopter 2016-04-01 11:59:30 +09:00
Randy Mackay
47873c1d34 AP_MotorsHeli: fix RSC_SETPOINT param description 2016-04-01 11:59:30 +09:00
Randy Mackay
bcbe6b279e AP_MotorsHeli: explicitely set ServoControlModes enum 
Non functional change but this enum is tied to a parameter value so the exact value is important
 2016-04-01 11:59:30 +09:00
Randy Mackay
8febcedf4b AP_MotorsHeli: remove unnecessary static declaration 2016-04-01 11:59:30 +09:00
Randy Mackay
f022e504b0 AP_MotorsHeli: remove unused get_collective_mid and out methods 2016-04-01 11:59:30 +09:00
Randy Mackay
a18722a2fc AP_MotorsHeli: output_min uses new move_actuators in -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay
1197a439af AP_MotorsHeli: move_actuators to -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay
8057d2fc58 AP_MotorsMatrix: remove unnecessary virtual declarations 2016-04-01 11:59:30 +09:00
Randy Mackay
c49a914597 AC_AttControlHeli: remove unnecessary virtual declaration 2016-04-01 11:59:30 +09:00
Randy Mackay
2b123ee15d AC_AttControlHeli: fix rate_bf_to_motor_roll_pitch and yaw output in -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay
71866be652 AP_MotorsHeliSingle: move_yaw in -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay
f6120b801b AP_MotorsHeliSingle: move_actuators in -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay
61cf8e1698 AP_Motors: add calc_pwm_output_1to1 and 0to1 
Convenience functions to convert from -1 to +1 input to pwm output
 2016-04-01 11:59:30 +09:00
Randy Mackay
56f05e6a96 AP_Motors: add set_desired_spool_state 2016-04-01 11:59:30 +09:00
Randy Mackay
2716126e40 AP_MotorsMulticopter: use desired_spool from AP_Motors class 2016-04-01 11:59:30 +09:00
Randy Mackay
93d1f1969c AP_MotorsMulticopter: remove set_desired_spool_state 
This is being moved to AP_Motors
 2016-04-01 11:59:30 +09:00
Randy Mackay
4dd4d38b9b AP_MotorsMulticopter: fix output_to_motors definition 2016-04-01 11:59:30 +09:00
Randy Mackay
c5e5b4f783 AC_AttControl: fix rate controller max definitions to -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay
3ae9b606ff AP_Motors: remove unnecessary output_to_motors declaration 
This is declared down in the AP_MotorsMulticopter
 2016-04-01 11:59:30 +09:00
Randy Mackay
f2ff9e34ad AP_Motors: remove output_armed_zero_throttle 2016-04-01 11:59:30 +09:00
Leonard Hall
979534279a AC_AttControl: roll, pitch, yaw output to motors in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall
879e12ba43 AP_MotorsHeli_Single: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall
97f0b00e3e AP_MotorsHeli: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall
b701c109cf AP_MotorsSingle: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall
1a308c2eb8 AP_MotorsCoax: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall
4d208fcd47 AP_MotorsTri: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall
027284fba0 AP_MotorsMatrix: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall
ae4e495698 AP_Motors: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall
90b3d7ca39 AP_Motors: example sketch tests stab patch more thoroughly 2016-04-01 11:59:30 +09:00
Leonard Hall
cef3f42df5 AP_Motors: fix example make.inc 2016-04-01 11:59:30 +09:00
Leonard Hall
1174ad3e66 AC_InputManager_Heli: get_pilot_desired_throttle in 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall
d312e52aee AC_InputManager: add f for float constants 2016-04-01 11:59:30 +09:00
Leonard Hall
c64a505906 AC_PosControl: relax_alt_hold_controllers accepts throttle in 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall
15be80a25d AC_PosControl: accel_to_throttle outputs 0 to 1 2016-04-01 11:59:30 +09:00
Leonard Hall
e5d6d45851 AC_AttControl_Heli: angle_boost to float 2016-04-01 11:59:30 +09:00
Leonard Hall
2822b93cd4 AC_AttControl: add get_throttle_in accessor 
Used for logging only
 2016-04-01 11:59:30 +09:00
Leonard Hall
c0f209fa42 AC_AttControl: angle_boost to float 2016-04-01 11:59:30 +09:00
Leonard Hall
6f29bbafb4 AC_AttControl_Multi: get_althold_lean_angle_max uses motor thrust in 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall
24f975c16a AC_AttControl_Multi: fix throttle boost for 0 to 1 2016-04-01 11:59:30 +09:00
Leonard Hall
bab08cbcc1 AC_AttControl_Multi: add divide by zero check 2016-04-01 11:59:30 +09:00
Leonard Hall
d2a1cdf906 MotorsHeli: replace throttle_control_input with throttle_in 
throttle_control_input was 0 to 1000 range, throttle_in is 0 to 1
 2016-04-01 11:59:30 +09:00
Leonard Hall
f02e8f8e01 AP_MotorsHeli: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall
5cd4b78918 AP_MotorsSingle: remove reverse parameters 
No longer necessary because we can use individual servo reverse params
 2016-04-01 11:59:30 +09:00
Leonard Hall
6264159f4d AP_MotorsSingle: move servo objects into Single class 2016-04-01 11:59:30 +09:00
Leonard Hall
21d304b86d AP_MotorsSingle: output_to_motors implements spool logic 2016-04-01 11:59:30 +09:00
Leonard Hall
24a100e429 AP_MotorsSingle: stability patch uses 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall
cffdced838 AP_MotorsSingle: support 4 servo outputs 2016-04-01 11:59:30 +09:00
Leonard Hall
f53d6e95e8 AP_MotorsSingle: rename _rev_roll to _roll_reverse 
Also rename _rev_pitch to _pitch_reverse and _rev_yaw to _yaw_reverse
 2016-04-01 11:59:30 +09:00
Leonard Hall
4db73d86af AP_MotorsSingle: remove output_disarmed 2016-04-01 11:59:30 +09:00
Leonard Hall
46ab198ebc AP_MotorsSingle: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall
40c18891cf AP_MotorsCoax: remove reverse parameters 
No longer necessary because we can use individual servo reverse params
 2016-04-01 11:59:30 +09:00
Leonard Hall
260006dcb3 AP_MotorsCoax: move servo objects into Coax class 2016-04-01 11:59:30 +09:00
Leonard Hall
110d41ee24 AP_MotorsCoax: fix SV_SPEED param description 2016-04-01 11:59:30 +09:00
Leonard Hall
8d8f52b22f AP_MotorsCoax: output_to_motors implements spool logic 2016-04-01 11:59:30 +09:00
Leonard Hall
b85c20bb65 AP_MotorsCoax: stability patch in 0 to 1 range 
Also removes setting of limits in stability patch
sets outputs for additional 2 servos
 2016-04-01 11:59:30 +09:00
Leonard Hall
7df9b2eb8c AP_MotorsCoax: support 4 servo outputs 2016-04-01 11:59:30 +09:00
Leonard Hall
7d6c6b5556 AP_MotorsCoax: rename _rev_roll to _roll_reverse 
Also rename _rev_pitch to _pitch_reverse and _rev_yaw to _yaw_reverse
 2016-04-01 11:59:30 +09:00
Leonard Hall
5cb44901ff AP_MotorsCoax: remove output_disarmed 2016-04-01 11:59:30 +09:00
Leonard Hall
3df52aad5f AP_MotorsCoax: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall
45a16d6dad AP_MotorsTri: implement output_to_motors for spool logic 2016-04-01 11:59:30 +09:00
Leonard Hall
d0a7579fa0 AP_MotorsTri: stability patch in 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall
80f77bc30b AP_MotorsTri: output_min does not set limits 2016-04-01 11:59:30 +09:00
Leonard Hall
ba659be5cb AP_MotorsTri: rename _yaw_servo_reverse to _yaw_reverse 2016-04-01 11:59:30 +09:00
Leonard Hall
8c4d6d6fbe AP_MotorsTri: remove output_disarmed 2016-04-01 11:59:30 +09:00
Leonard Hall
a2fdcfaf3f AP_MotorsTri: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall
397940a9a4 AP_MotorsMatrix: implement output_to_motors 2016-04-01 11:59:30 +09:00
Leonard Hall
cdec8f3387 AP_MotorsMatrix: remove output_disarmed 2016-04-01 11:59:30 +09:00
Leonard Hall
b965857229 AP_MotorsMatrix: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall
d0c6d087a5 AP_MotorsMatrix: do not set limits in output_min 2016-04-01 11:59:30 +09:00
Leonard Hall
3fef60da45 AP_MotorsMatrix: stability patch in 0 to 1 range 
Includes storing motor level thrusts to _thrust_rpyt_out
rename _throttle_thr_mix_desired to _throttle_rpy_mix_desired
rename _throttle_thr_mix to _throttle_rpy_mix
use get_hover_throttle_as_high_end_pct
use throttle_thrust_max updated by multicopter spool logic
do not set limits in stability patch
 2016-04-01 11:59:30 +09:00
Leonard Hall
5841310ac7 AP_MotorsMulticopter: update_throttle_filter limits throttle to 0 to 1 2016-04-01 11:59:30 +09:00
Leonard Hall
420b90953c AP_MotorsMulticopter: throttle_radio_min, max to multicopter class 
Moved in from Motors class, only ever used by multicopters
No functional change
 2016-04-01 11:59:30 +09:00
Leonard Hall
2c9a02066d AP_MotorsMulticopter: remove unused functions and variables 2016-04-01 11:59:30 +09:00
Leonard Hall
290e657f61 AP_MotorsMulticopter: update_battery_resistance captures resting voltage while disarmed 
Previously it could also capture this when the input throttle was zero
 2016-04-01 11:59:30 +09:00
Leonard Hall
bc42cb2a66 AP_MotorsMulticopter: update_battery_resistance uses get_throttle accessor 2016-04-01 11:59:30 +09:00
Leonard Hall
8228d9e72c AP_MotorsMulticopter: current_limit_max_throttle uses get_throttle accessor 2016-04-01 11:59:30 +09:00
Leonard Hall
3cbc15bb5b AP_MotorsMulticopter: add get_throttle_thrust_max accessor 2016-04-01 11:59:30 +09:00
Leonard Hall
d7dc37bda0 AP_MotorsMulticopter: remove apply_thrust_curve_and_volt_scaling_pwm 2016-04-01 11:59:30 +09:00
Leonard Hall
06f25b669d AP_MotorsMulticopter: add roll, pitch, throttle and yaw pass through 2016-04-01 11:59:30 +09:00
Leonard Hall
d7c27c949c AP_MotorsMulticopter: add spool_up_complete accessor function 2016-04-01 11:59:30 +09:00
Leonard Hall
983d2dc97a AP_MotorsMulticopter: update_throttle_filter does not set throttle_in 
get_throttle method now used to access filtered throttle
 2016-04-01 11:59:30 +09:00
Leonard Hall
3fc3858fbd AP_MotorsMulticopter: set_throttle_range calcs _min_throttle before use 2016-04-01 11:59:30 +09:00
Leonard Hall
b26318c178 AP_MotorsMulticopter: output_logic implements spooling 2016-04-01 11:59:30 +09:00
Leonard Hall
b7fe6aa16e AP_MotorsMulticopter: remove update_max_throttle 2016-04-01 11:59:30 +09:00
Leonard Hall
be64c71065 AP_MotorsMulticopter: add get_current_limit_max_throttle 
returns the current limited maximum throttle as a number between 0 ~ 1 in the range throttle_min to throttle_max
 2016-04-01 11:59:30 +09:00
Leonard Hall
64ba45a683 AP_MotorsMulticopter: add spin_when_armed_low_end_pct 
returns the spin-when-armed value as a number from 0 to 1 in the range 0 to throttle_min
 2016-04-01 11:59:30 +09:00
Leonard Hall
49819d822f AP_MotorsMulticopter: add get_hover_throttle_as_high_end_pct 
Returns hover throttle as a number from 0 to 1 in the range from throttle_min to throttle_max
 2016-04-01 11:59:30 +09:00
Leonard Hall
e625c105a4 AP_MotorsMulticopter: remove get_throttle_warn 2016-04-01 11:59:30 +09:00
Leonard Hall
3854f2eda7 AP_MotorsMulticopter: rename _throttle_thr_mix_desired to _throttle_rpy_mix_desired 
No functional change
Also rename _throttle_thr_mix to _throttle_rpy_mix
 2016-04-01 11:59:30 +09:00
Leonard Hall
65bbc23a08 AP_MotorsMulticopter: apply_thrust_curve_and_volt_scaling in 0 to 1 range 
existing equivalent pwm function becomes apply_thrust_curve_and_volt_scaling_pwm
 2016-04-01 11:59:30 +09:00
Leonard Hall
cb39f8aab7 AP_MotorsMuticopter: calc_thrust_to_pwm converts thrust in 0 to 1 range to pwm 
pwm output is always between throttle min and throttle max
 2016-04-01 11:59:30 +09:00
Leonard Hall
80ddce103f AP_Motors: move set_throttle_filter_cutoff declaration 
No functional change
 2016-04-01 11:59:30 +09:00
Leonard Hall
649a8c461d AP_Motors: remove unused throttle_radio_min, max 
Moved to AP_MotorsMulticopter
 2016-04-01 11:59:30 +09:00
Leonard Hall
e84011603c AP_Motors: remove unused throttle_pwm_scalar, rpy_pwm_scalar 2016-04-01 11:59:30 +09:00
Leonard Hall
8e1351e474 AP_Motors: init member to resolve compiler warning 2016-04-01 11:59:30 +09:00
Leonard Hall
ed51c7a28d AP_Motors: replace throttle_control_input with throttle_in 
throttle_control_input was 0 to 1000 range, throttle_in is 0 to 1
 2016-04-01 11:59:30 +09:00
Leonard Hall
c96b91efb6 AP_Motors: add output_to_motors 2016-04-01 11:59:30 +09:00
Leonard Hall
ac579685df AP_Motors: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall
666a92ae2f AP_Motors: set_throttle accepts 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall
3c74b4cc69 Motors: add get_roll_thrust which returns roll input in range 0 to 1 
Also added get_pitch_thrust, get_yaw_thrust
 2016-04-01 11:59:30 +09:00
Lucas De Marchi
f304fcf4da AP_InertialSensor: examples: add coding style fixes 
Several coding style problems were already fixed by previous commit,
just finish the cleanup on this example:

  - replace tabs with spaces
  - remove unneeded \r
  - remove extra spaces
 2016-03-31 14:54:17 -03:00
AndersonRayner
10e7d43007 AP_InertialSensor: Add output of all IMUs to example 2016-03-31 14:54:17 -03:00
Lucas De Marchi
a502c0924c GCS_MAVLink: simplify sanity check 2016-03-30 01:32:45 -03:00
Francisco Ferreira
d3e149e5d7 GCS_MAVLink: ignore Clang out-of-range warning 
warning: comparison of constant 4 with expression of type 'mavlink_channel_t' is always false [-Wtautological-constant-out-of-range-compare]
    if (chan >= MAVLINK_COMM_NUM_BUFFERS) {
        ~~~~ ^  ~~~~~~~~~~~~~~~~~~~~~~~~
 2016-03-30 01:32:45 -03:00
Marc MERLIN
5bcd1b02ef RSSI channel is not limited to 5-8. 
Fix doc per my request on https://github.com/ArduPilot/ardupilot/issues/3280
 2016-03-29 08:16:42 -07:00
Tom Pittenger
6718241dad cleanup comments 2016-03-29 05:32:28 -07:00
Andrew Tridgell
894e07a0bd AP_Parachute: added CHUTE_DELAY_MS parameter 
on fixed wing it may take quite some time for the propeller to stop
 2016-03-29 05:48:40 +11:00
Andrew Tridgell
73a2c99d56 SITL: limit rotational rate to 2000dps 2016-03-26 14:23:05 +11:00
Andrew Tridgell
4d01cb1716 HAL_SITL: fixed SITL engine mul error 
expression without get() was treated as int
 2016-03-26 14:17:12 +11:00
Andrew Tridgell
b4c6a0e30e AP_TECS: added logging of speed_weight and state flags 2016-03-26 08:41:09 +11:00
Andrew Tridgell
8ff932b61c AP_TECS: allow underspeed to end faster 
we now can exit an underspeed condition if we stay above min speed for
3 seconds and also reach 15% above min speed. This prevents a problem
with the thrust line causing downpitch leading to a crash due to too
much throttle
 2016-03-26 07:44:22 +11:00
Andrew Tridgell
1ecfa6b487 RC_Channel: fixed example in SITL 2016-03-25 21:35:33 +11:00
Andrew Tridgell
5c92adddf9 HAL_SITL: allow examples to run under SITL 2016-03-25 21:35:16 +11:00
Andrew Tridgell
1e4fe7996e HAL_Linux: update URL 2016-03-25 20:47:53 +11:00
Andrew Tridgell
9737050a23 HAL_FLYMAPLE: update URL 2016-03-25 20:47:44 +11:00
Andrew Tridgell
664d91802e HAL_AVR: update URL 2016-03-25 20:47:35 +11:00
Andrew Tridgell
075dd49afe DataFlash: added Log_Write_Rate() 
needed for quadplane as well as copter so should be in common code
 2016-03-25 12:13:58 +11:00
Andrew Tridgell
ab07781c66 APM_Control: raise default P and I gains, and set a lower limit on I for pitch 
Too many users have very low I gains, which causes a lot of problems for TECS
 2016-03-25 09:54:53 +11:00
Lucas De Marchi
46936767c1 AP_Compass: LSM303D: check for overruns in compass values 2016-03-23 17:50:38 -03:00
Lucas De Marchi
cf2d866d51 AP_Compass: LSM303D: used AP_HAL::Device interface 
Initialization was also changed a little bit so we don't try to
initialize 25 times. We rather use the same methods as in the
AP_InertialSensor drivers.

Also move up the call to is_zero() in read_raw so we don't set
_mag_[x|y|z] in case of failure.
 2016-03-23 17:50:38 -03:00
Lucas De Marchi
5164fbb81b AP_Compass: LSM303D: cleanup driver 
Make it similar to other compass drivers, including method names.
 2016-03-23 17:50:38 -03:00
Lucas De Marchi
20a4a42cb3 AP_Compass: don't store raw and unfiltered fields 
These are not used. The only place where raw fields are used are in the
compass calibrator and we don't need to store them.

Additionally remove duplicated documentation about the meaning of the
functions to avoid them getting out of sync.
 2016-03-23 17:50:38 -03:00
Lucas De Marchi
e6059f5197 AP_Compass: rename files to follow other libraries 
AP_Compass.h is the main header to be exported and AP_Compass.cpp its
implementation. There's no need for an additional header.
 2016-03-23 17:50:38 -03:00
Lucas De Marchi
286697b844 AP_Compass: don't rebuild tree when single driver changes 
Let the drivers be internal to the library so we don't need to rebuild
the entire tree when a single driver changes.
 2016-03-23 17:50:38 -03:00
Lucas De Marchi
d3831dbb98 AP_Compass: AK8963: use AP_HAL::I2CDevice abstraction 
We still need the BusDriver (in some places called SerialBus) interface
since this driver can also be used on an AuxiliaryBus and that has a
different interface.
 2016-03-23 17:50:38 -03:00
Lucas De Marchi
41c1209169 AP_Compass: HMC5843: improve readability 
- Capitalize and rename constants
 - Make clear what gain is applied in calibration and what is the
   "normal" gain
 - Make the separation between HMC5883L and HMC5843 explicit when it
   makes sense to improve readability
 - Remove spurious delay in calibrate function
 2016-03-23 17:50:38 -03:00
Lucas De Marchi
0291ad869b AP_Compass: HMC5843: use AP_HAL::I2CDevice abstraction 
We still need the BusDriver (in some places called SerialBus) interface
since this driver can also be used on an AuxiliaryBus and that has a
different interface.

Besides the usual conversion some more improvements:

  - Use generic function to convert endianness
  - Minor cleanups
  - Reorder per-board ifdefs in compass instantiation: distinguish when
    there's a default compass to when it should probe other compasses
 2016-03-23 17:50:38 -03:00
Lucas De Marchi
57f8db5672 AP_HAL: sparse-endian: conditionally include byteswap header 
This is not present in qurt.
 2016-03-23 17:50:38 -03:00
Lucas De Marchi
c5dc54dac7 AP_HAL: utility: import sparse-endian header 2016-03-23 17:50:38 -03:00
Lucas De Marchi
0ed3a93142 AP_HAL: define compass locations for linux boards 2016-03-23 17:50:38 -03:00
ashwinvasudevan
e33812e1cb AP_InertialSensor: added missing brackets 2016-03-23 17:46:41 +09:00
Lucas De Marchi
72b246e52c AP_HAL_Linux: fix use of 0-length array 
0-length arrays are supported in C but forbidden in C++. GCC allows it
but clang is more strict:

../../libraries/AP_HAL_Linux/SPIDriver.cpp:75:35: fatal error: no matching constructor for initialization of 'Linux::SPIDeviceDriver [0]'
SPIDeviceDriver SPIDeviceManager::_device[0];
                                  ^
../../libraries/AP_HAL_Linux/SPIDriver.h:20:7: note: candidate constructor (the implicit move constructor) not viable: requires 1 argument, but 0 were provided
class SPIDeviceDriver : public AP_HAL::SPIDeviceDriver {
      ^
../../libraries/AP_HAL_Linux/SPIDriver.h:20:7: note: candidate constructor (the implicit copy constructor) not viable: requires 1 argument, but 0 were provided
../../libraries/AP_HAL_Linux/SPIDriver.h:25:5: note: candidate constructor not viable: requires 9 arguments, but 0 were provided
    SPIDeviceDriver(const char *name, uint16_t bus, uint16_t subdev, enum AP_HAL::SPIDeviceType type, uint8_t mode, uint8_t bitsPerWord, int16_t cs_pin, uint32_t lowspeed, uint32_t highspeed);
    ^
1 error generated.
 2016-03-20 00:17:02 -03:00
Andrew Tridgell
da2a71a3de AP_BoardConfig: raise uavcan startup delay to 2s 2016-03-19 21:18:05 +11:00
Lucas De Marchi
abbe419823 AP_Compass: fix mismatched tag 
In file included from /home/lucas/p/dronecode/ardupilot/libraries/AP_Compass/Compass.h:6:
/home/lucas/p/dronecode/ardupilot/libraries/AP_Compass/CompassCalibrator.h:86:5: warning: struct 'param_t' was previously declared as a class [-Wmismatched-tags]
    struct param_t _params;
    ^
/home/lucas/p/dronecode/ardupilot/libraries/AP_Compass/CompassCalibrator.h:44:11: note: previous use is here
    class param_t {
          ^
/home/lucas/p/dronecode/ardupilot/libraries/AP_Compass/CompassCalibrator.h:86:5: note: did you mean class here?
    struct param_t _params;
    ^~~~~~
 2016-03-18 22:39:39 -03:00
Lucas De Marchi
d5d6a10e63 AP_Compass: LSM303D now is part of LSM9DS0 2016-03-18 21:51:37 -03:00
Lucas De Marchi
a671b7f5b2 AP_Compass: remove misleading message 
Not having data ready during initialization is normal. Don't print error
message since it can mislead people to think the compass was not
initialized successfully.
 2016-03-18 21:51:37 -03:00
raspilot
1d1d224c18 AP_InertialSensor: Enable dual IMU for raspilot 2016-03-18 21:51:37 -03:00
raspilot
9d787e44cc AP_HAL_Linux: update spi table for raspilot 2016-03-18 21:51:37 -03:00
Lucas De Marchi
c5022ef5c9 AP_HAL: add names for LSM9DS0 on raspilot 2016-03-18 21:51:37 -03:00
Lucas De Marchi
f75c12f57c AP_InertialSensor: LSM9DS0: change mode of drdy pins to input 2016-03-18 21:51:37 -03:00
raspilot
c83e4df002 AP_InertialSensor: LSM9DS0: Disable I2C at init to avoid SDA hanging by slave. 2016-03-18 21:51:37 -03:00
raspilot
557beb4bb1 AP_InertialSensor: LSM9DS0: Fixed wrong call to _register_read_xm() 2016-03-18 21:51:37 -03:00
Lucas De Marchi
c1623c21cc AP_HAL_Linux: rename ToneAlarmDriver to follow other names 
We don't add "Driver" to the name of the files anymore.
 2016-03-18 21:51:37 -03:00
Lucas De Marchi
d52ee7c0a1 AP_HAL_Linux: ToneAlarmDriver_Raspilot: cleanup driver 
- Fix coding style
  - Remove unused variables and members
  - Add virtual as needed and override where needed
 2016-03-18 21:51:36 -03:00
Pritam Ghanghas
6de5b52974 AP_HAL_Linux: separate class for tone alarm driver 2016-03-18 21:51:36 -03:00
Michael Oborne
92106a944f AP_GPS_UBLOX: add data injection support 2016-03-18 15:51:32 +11:00
Andrew Tridgell
eb89b5bbb6 AP_L1_Control: prevent possibly fly-away when passed waypoint in L1 
if the top level controller doesn't consider a waypoint complete when
we are passed next_WP then it would keep flying away from the line
segment. This doesn't happen with the current master code, but we want
to ensure it is handled
 2016-03-18 13:47:44 +11:00
Andrew Tridgell
7d92202db9 AP_Param: save flash space for parameter strings 
now that we no longer need AVR support we can use nul terminated
strings for parameter names, saving a couple of k of flash space
 2016-03-18 13:03:18 +11:00
Andrew Tridgell
692e042eac AP_Arming: set AP_PARAM_NO_SHIFT 2016-03-18 12:33:45 +11:00
Andrew Tridgell
4deb01b8d5 RC_Channel: set AP_PARAM_NO_SHIFT 2016-03-18 12:33:34 +11:00
Andrew Tridgell
018c7425a4 AP_Param: added AP_PARAM_NO_SHIFT 
used for cases where we know the shift is not needed
 2016-03-18 12:33:16 +11:00
Andrew Tridgell
1d42b0281a SITL: ADSB: fixed heading and fixed windows startup 2016-03-18 11:18:19 +11:00
Andrew Tridgell
71b6d3e33d AP_Param: add in nested group offset in load for conversion 2016-03-18 10:04:56 +11:00