Tom Pittenger
ed98617d42
Plane: utilize radius for loiter commands
2016-02-29 06:43:29 -08:00
Andrew Tridgell
f35d05e374
Plane: improved quadplane default gains
...
0.25 is better for an average quadplane for roll/pitch
0.5 is a bit high for accel-z, 0.3 is better
2016-02-29 21:46:27 +11:00
Andrew Tridgell
93ac82e1f6
Plane: write voltage/current much more frequently
2016-02-29 21:24:54 +11:00
Will Sackfield
fabe235130
ArduPlane: initialize the fail_test variable
...
* Clang complains if variables are not initialized
2016-02-29 14:14:37 +11:00
Will Sackfield
5f5035933f
ArduPlane: static cast to uint8 on initialization of struct
...
* clang requires that the casting be explicit
2016-02-29 14:14:37 +11:00
Andrew Tridgell
968f07f583
Plane: allow live quadplane PID tuning
2016-02-29 14:10:32 +11:00
Tom Pittenger
b8fc524954
Plane: enforce expected flight_stage in TECS
2016-02-25 06:37:24 -08:00
Tom Pittenger
993e5b438c
Plane: add to LAND_NEUTRL behavior
...
offer netrual vs disabled outputs
2016-02-25 05:51:44 -08:00
Tom Pittenger
6399d00950
Plane: convert to using static send_statustext
...
- no more MSG_STATUSTEXT
- TODO: replace calls to gcs_send_text and gcs_send_text_fmt to GCS_MAVLINK::send_statustext()
2016-02-24 09:18:06 +11:00
Andrew Tridgell
ad78a31255
Plane: move set_dataflash(0 for static logging
2016-02-24 09:18:05 +11:00
Tom Pittenger
881dabf048
Plane: add missionLoaded arming check fail for mis.len <= 1
2016-02-22 16:19:40 +11:00
Andrew Tridgell
1acf25b6e2
Plane: use set_dataflash()
...
give GCS_MAVLINK a dataflash object for logging text messages
2016-02-22 12:34:32 +11:00
Andrew Tridgell
b84b480086
Plane: added PID tuning for quadplane modes
2016-02-20 20:20:27 +11:00
Andrew Tridgell
e2abaefc44
Plane: check SCHED_LOOP_RATE for quadplane
2016-02-20 20:02:52 +11:00
Lucas De Marchi
0b22b520b8
ArduPlane: remove unused CMAKE define
...
This is a leftover from previos cmake build system.
2016-02-19 19:15:39 -02:00
Peter Barker
ca4017d093
Plane: defines.h should not use defines from config.h
...
config.h includes defines.h early, so defines in config.h are unavailable
2016-02-19 12:34:23 -02:00
Tom Pittenger
d0edfa5dfa
Plane: compile warning fix
...
/ardupilot/ArduPlane/quadplane.cpp:773:107: warning: implicit conversion from 'float' to 'double' when passing argument to function [-Wdouble-promotion]
2016-02-17 14:54:02 -08:00
Tom Pittenger
0b26a34f22
Plane: new param LAND_THEN_NEUTRL
...
// @Description: When enabled, after an autoland and auto-disarm via LAND_DISARMDELAY happens then set all servos to neutral. This is helpful when an aircraft has a rough landing upside down or a crazy angle causing the servos to strain.
2016-02-16 23:40:44 -08:00
Andrew Tridgell
8ecf54bf75
Plane: use throttle slew when in quadplane assisted flight
...
this prevents a sudden throttle change on a petrol motor when
transitioning
2016-02-13 11:38:33 +11:00
Tom Pittenger
a280396645
Plane: nonfunctional change, comment only. Units were in old in comment
2016-02-12 12:14:38 -08:00
Tom Pittenger
c837fbca2f
Plane: 3/3 new param TECS_LAND_SRC for Land Sink Rate Change
...
// @Description: When zero, the flare sink rate (TECS_LAND_SINK) is a fixed sink demand. With this enabled the flare sinkrate will increase/decrease the flare sink demand as you get further beyond the LAND waypoint. Has no effect before the waypoint. This value is added to TECS_LAND_SINK proportional to distance traveled after wp. With an increasing sink rate you can still land in a given distance if you're traveling too fast and cruise passed the land point. A positive value will force the plane to land sooner proportional to distance passed land point. A negative number will tell the plane to slowly climb allowing for a pitched-up stall landing. Recommend 0.2 as initial value.
2016-02-12 11:39:27 -08:00
Tom Pittenger
8ac6343730
Plane: removing mission_cmd in TECS and making it bool is_landing
...
this is reverse-thrust cleanup suggested by Tridge
2016-02-12 11:22:59 -08:00
Tom Pittenger
d04b5e735f
Plane: add SYS_STATUS reverse_motor
...
- helpful to tell GCS to interpret VFR_HUD as negative when bit is enabled
- throttle is sent as abs()
2016-02-11 18:46:01 +11:00
Tom Pittenger
fa53263ca9
Plane: make throttle_percentage() signed
2016-02-11 18:46:01 +11:00
Tom Pittenger
ebec68c55b
Plane: param desc to increase THR_MIN range to include negative thrust
2016-02-10 22:18:07 -08:00
Tom Pittenger
f369899509
Plane: restrict rudder arming where reverse_thrust is enabled and commanding negative
2016-02-10 22:18:06 -08:00
Tom Pittenger
a920b7322d
Plane: more desc for param USE_REV_THRUST
2016-02-10 22:04:50 -08:00
Tom Pittenger
046741d23b
Plane: abort landing at 90% throttle instead of 95%
2016-02-08 21:13:43 -08:00
Tom Pittenger
b098466e87
Plane: reduce redundant logging of STAT from 6 Hz to 5 Hz
...
- STAT log entry was being done every 5 Hz plus at 1 Hz. This removes the 1Hz.
2016-02-08 21:13:12 -08:00
Tom Pittenger
66fcd8f58a
Plane: run is_crashed at 5hz instead of 1hz
2016-02-08 21:13:04 -08:00
Andrew Tridgell
93185be1ff
Plane: reset land_pre_flare on mode change
2016-02-09 14:18:02 +11:00
Tom Pittenger
2e92089ce6
Plane: Reverse Thrust
...
Reverse thrust for controlled landings, even with much steeper approach slopes. This is achieved by allowing throttle demand to go negative to maintain a target airspeed. A Pre-Flare stage was added, triggered by an altitude, to allow for a slower airspeed just before land. That lower airspeed can be near stall.
new params LAND_PF_ALT, LAND_PF_SEC, LAND_PF_ARSPD, USE_REV_THRUST
2016-02-09 14:18:02 +11:00
Tom Pittenger
1cb094f12e
Plane: make throttle signed (pos and neg)
2016-02-09 14:18:02 +11:00
Tom Pittenger
b8d5369ebd
Plane: add flight stage LAND_PREFLARE
2016-02-09 14:18:02 +11:00
Andrew Tridgell
f8d8616598
Plane: support all types of multicopters in quadplane
...
adds Q_FRAME_CLASS for class of multicopter frame
2016-02-08 11:00:19 +11:00
Andrew Tridgell
eeda1b56de
Plane: don't do throttle nudge while in geofence failsafe
...
user stick inputs should not apply when outside fence
2016-02-08 10:59:37 +11:00
Tom Pittenger
9157f634eb
Plane: Add Tom Pittenger to authors list
2016-02-02 10:50:12 +09:00
Andrew Tridgell
379ca5ac00
Plane: prepare for 3.5.0 release
2016-01-30 13:04:51 +11:00
Andrew Tridgell
99847da297
Plane: release 3.5.0beta2
2016-01-29 12:21:39 +11:00
Andrew Tridgell
125af1b856
Plane: added OVERRIDE_SAFETY parameter
2016-01-29 12:20:14 +11:00
Michael du Breuil
bcc939930c
Plane: Only resend the mixer configuration if its changed
2016-01-29 12:20:14 +11:00
Andrew Tridgell
8dba91658c
ArduPlane: log a picture if AP_Camera::control() returns true
2016-01-29 10:01:51 +11:00
Andrew Tridgell
d82c8dcd6d
ArduPlane: update for changed AP_Camera API
2016-01-29 09:19:44 +11:00
Dario Lindo Andres
9bba55f937
ArduPlane: Added precise camera trigger logging
...
Added update_trigger and check_digital_pin functions
added camera trigger precise time mark
detect camera feedback pin status
added support for simple digital pin
included support for digital pin. Already included in
added support for TRIGGER MSG
2016-01-29 09:19:43 +11:00
Jonathan Challinger
9000756c80
Plane: reflect changes to AP_Mount
2016-01-23 10:35:47 +09:00
Gustavo Jose de Sousa
c2e3f05dbf
waf: ardupilotwaf: prefix build context methods with ap_
...
It helps to distinguish between things from waf and things from ardupilotwaf.
2016-01-22 20:10:29 -02:00
Gustavo Jose de Sousa
e9d3dc9e72
waf: vehicles and antennatracker: use methods from bld
...
Instead of from ardupilotwaf.
2016-01-22 20:10:29 -02:00
Gustavo Jose de Sousa
cf432e8b3e
waf: ardupilotwaf: rename vehicle_stlib to ap_stlib
...
That function is not only for vehicles.
2016-01-22 20:10:28 -02:00
Gustavo Jose de Sousa
a35c0d48b0
waf: ardupilotwaf: rename program to ap_program
...
Make the rename so that there is no name clashes when defining it as a taskgen
method.
2016-01-22 20:10:28 -02:00
Andrew Tridgell
115d089904
Plane: continue limiting pitch during last phase of transition
...
this prevents a very high pitch demand causing the plane to slow down
to below assist speed
2016-01-20 18:30:48 +11:00