Commit Graph

106 Commits

Author SHA1 Message Date
Andrew Tridgell
ecce2a73d0 HAL_ChibiOS: Storage::_timer_tick is an override 2018-02-07 20:33:45 +11:00
Andrew Tridgell
713006bb1d HAL_ChibiOS: allow more OTG defines to be overridden 2018-02-07 20:33:45 +11:00
Andrew Tridgell
1fb257a35a HAL_ChibiOS: initial hwdef.dat for revo mini 2018-02-07 20:33:45 +11:00
Andrew Tridgell
979a2a4796 HAL_ChibiOS: removed debug code 2018-02-07 20:33:45 +11:00
Siddharth Purohit
538af2a58a HAL_ChibiOS: fix parity and stop bit setting 2018-02-07 20:33:45 +11:00
Mark Whitehorn
b94b1dcd97 AP_HAL_ChibiOS: add missing declaration 2018-02-07 20:33:45 +11:00
Siddharth Purohit
df4bf7e476 HAL_ChibiOS: fix irq clash with unnecessary access to readbuf ring buffer 2018-02-07 20:33:45 +11:00
Siddharth Purohit
02696882e9 HAL_ChibiOS: if unbuffered write, do continue to invoke DMA writes
adds higher latency to device sharing DMA
2018-02-07 20:33:45 +11:00
proficnc
c613c0bde2 added the cube red hardware definition 2018-02-07 20:33:45 +11:00
Andrew Tridgell
3dacbd1b36 HAL_ChibiOS: hold write lock for unbuffered writes 2018-02-07 20:33:45 +11:00
Andrew Tridgell
ad26ca4a27 HAL_ChibiOS: implement parity and stop bits controls 2018-02-07 20:33:45 +11:00
Andrew Tridgell
2e15285c51 HAL_ChibiOS: refuse unbuffered writes without DMA
we would need much more complex code to handle this
2018-02-07 20:33:45 +11:00
Andrew Tridgell
3f2cc2c9d6 HAL_ChibiOS: implement low latency UART writes
this implements the set_unbuffered_writes() API by performing writes
directly in the write() call and not from a timer
2018-02-07 20:33:45 +11:00
Andrew Tridgell
015c3a1fa3 HAL_ChibiOS: removed duplicate defines 2018-02-07 20:33:45 +11:00
Andrew Tridgell
865e4f3104 HAL_ChibiOS: implement _timer_tick in UARTDriver 2018-02-07 20:33:45 +11:00
Andrew Tridgell
a5bafb399f HAL_ChibiOS: adjust SPI pin speeds 2018-02-07 20:33:45 +11:00
Andrew Tridgell
7b251c9739 HAL_ChibiOS: lower FRAM CS speed to 2MHz
this matches old firmware
2018-01-20 17:40:07 +11:00
Andrew Tridgell
30fd2da108 HAL_ChibiOS: enable RTSCTS and SBUS_OUT 2018-01-20 17:40:07 +11:00
Andrew Tridgell
63671b06a8 HAL_ChibiOS: added HAL_I2C_MAX_CLOCK define 2018-01-20 17:40:07 +11:00
Andrew Tridgell
88f11f5a50 HAL_ChibiOS: added HAL_I2C_BUS_BASE
this allows fmuv4 to start at bus 1
2018-01-20 17:40:07 +11:00
bugobliterator
c60c0b8ab1 HAL_ChibiOS: fix undef line processing 2018-01-20 17:40:07 +11:00
Andrew Tridgell
8286486890 HAL_ChibiOS: drop default SPI priority to 179 2018-01-20 17:40:07 +11:00
Andrew Tridgell
ab748034a2 HAL_ChibiOS: removed RC inversion logic
not needed any more
2018-01-20 17:40:07 +11:00
bugobliterator
7db19cfae0 HAL_ChibiOS: use separate parameter for detect timeout 2018-01-20 17:40:07 +11:00
Andrew Tridgell
613d7a47ba HAL_ChibiOS: support RCIN on mindpx-v2 2018-01-20 17:40:07 +11:00
bugobliterator
02c7513f83 HAL_ChibiOS: add invert method and fix width measurement 2018-01-20 17:40:07 +11:00
bugobliterator
f7ac5aa079 HAL_ChibiOS: put rcin on a separate thread 2018-01-20 17:40:07 +11:00
Andrew Tridgell
f50f427a59 HAL_ChibiOS: added comment on beta fmuv4 board 2018-01-20 17:40:07 +11:00
Andrew Tridgell
743806116d HAL_ChibiOS: removed unusued ppm driver
now uses AP_RCProtocol
2018-01-20 17:40:07 +11:00
Andrew Tridgell
ccb85c2707 HAL_ChibiOS: fixed fmuv3 build with no ICU 2018-01-20 17:40:07 +11:00
Andrew Tridgell
33c7cba9af HAL_ChibiOS: use more efficient push mechanism in IRQ
and don't use push_force() as it is not safe to do reads from within
the producer
2018-01-20 17:40:07 +11:00
Andrew Tridgell
7a4f429b85 HAL_ChibiOS: don't adjust buffer size for protocol
its all about IRQ latency, not IRQ rate
2018-01-20 17:40:07 +11:00
Andrew Tridgell
e2c8fe27ef HAL_ChibiOS: fixed memory handling in SoftSigReader 2018-01-20 17:40:07 +11:00
bugobliterator
eeea2c9961 HAL_ChibiOS: use software signal reader for RCInput if available 2018-01-20 17:40:07 +11:00
bugobliterator
6be4c710c3 HAL_ChibiOS: add Software Signal reader using timer and DMA 2018-01-20 17:40:07 +11:00
bugobliterator
1db1ff799e HAL_ChibiOS: modify hwdef scripts to setup for generic RCIN 2018-01-20 17:40:07 +11:00
bugobliterator
1970d8a2c8 HAL_ChibiOS: use common RCIN pin for fmuv4 2018-01-20 17:40:07 +11:00
bugobliterator
445ba6ed39 HAL_ChibiOS: update ppm to use Extended ICU driver 2018-01-20 17:40:07 +11:00
Andrew Tridgell
7c23e33775 HAL_Chibios: set min output rate for oneshot to 100Hz
this will keep ESCs happy during gyro cal
2018-01-20 17:40:07 +11:00
Andrew Tridgell
b07c599bf2 Hal_Chibios: allow for faster INS sample times
we need higher priority on SPI and faster device loops
2018-01-20 17:40:07 +11:00
Andrew Tridgell
25f13ed518 HAL_Chibios: adjust MPU9250 clock speed down
this helps with fast sampling enabled
2018-01-20 17:40:07 +11:00
Andrew Tridgell
7e44b06440 HAL_ChibiOS: adjust SPI clock rates on FMUv4
this prevents some timing errors on the IMUs
2018-01-20 17:40:07 +11:00
Andrew Tridgell
dd59a5ff57 HAL_ChibiOS: adjust external bus clock for mpu9250
this fixes an issue with fast sampling on the PH2.1 cube
2018-01-20 17:40:07 +11:00
Andrew Tridgell
880a84294e HAL_ChibiOS: support oneshot mode
supports oneshot 125 and oneshot
2018-01-20 17:40:07 +11:00
Andrew Tridgell
ba3cdf74b5 HAL_Chibios: optional ADC debugging
this debugging capability is very useful on board bringup. It outputs
the first 6 analog channels as an AP_ADC MAVLink message
2018-01-20 17:40:07 +11:00
Andrew Tridgell
c863681849 HAL_ChibiOS: fixed PWM output assignment 2018-01-20 17:40:07 +11:00
Andrew Tridgell
82c6d2751f HAL_ChibiOS: fixed F412 ram and flash setup 2018-01-20 17:40:07 +11:00
Peter Barker
67bed1d6c2 HAL_ChibiOS: added support for Sparky2 STM23F405 board 2018-01-20 17:40:07 +11:00
Andrew Tridgell
f6138e3c91 HAL_ChibiOS: use calloc in preferance to malloc 2018-01-17 11:22:05 +11:00
Andrew Tridgell
8dae3fe59b HAL_ChibiOS: use calloc for malloc type
this is not strictly necessary on ChibiOS as we already override
malloc, but will keep static analysis happy
2018-01-17 11:22:05 +11:00