aepko/Ardupilot2
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
47,730 Commits 72 Branches 509 Tags 683 MiB
dfc4b37df1
Commit Graph

26153 Commits

Author SHA1 Message Date
Andrew Tridgell
dfc4b37df1 AP_HAL_Linux: removed perf counters 2021-06-07 14:29:27 +10:00
Andrew Tridgell
7c5c805381 AP_HAL: removed perf counters 2021-06-07 14:29:27 +10:00
Andrew Tridgell
684e32068b AP_Compass: removed perf counters 2021-06-07 14:29:27 +10:00
Peter Barker
d6348a0786 AP_NavEKF3: remove getBodyFrameOdomDebug 
Not used after we moved logging to be within AP_NavEKF3
 2021-06-07 09:28:52 +10:00
Peter Barker
dd3ab29b2f AP_NavEKF3: remove getFilterGpsStatus 
Not needed after we moved logging into NavEKF3
 2021-06-07 09:25:53 +10:00
Peter Barker
aaae7bda6b GCS_MAVLink: provide compatability with bad integer-stored radii 2021-06-06 11:41:30 +10:00
Peter Barker
76408c77dd AC_Fence: provide compatability with bad integer-stored radii 2021-06-06 11:41:30 +10:00
Peter Barker
e3db030d7a AC_Fence: load and store fence radii in floats 
These were simply being cast down to integers
 2021-06-06 11:41:30 +10:00
Peter Barker
e644a9dda8 StorageManager: add read_float and write_float 2021-06-06 11:41:30 +10:00
Andrew Tridgell
67fea9f2f8 HAL_ChibiOS: fixed DMA disable on contention 
this fixes a problem with the automatic DMA disable on DMA contention
in UARTs. This fixes issue #14581

the problem was that while tx_dma_enabled was correctly set to false,
it would keep looping inside write_pending_bytes_DMA() if the data
arrived in the write buffer at a faster rate than it could be sent
out, which did happen with a mavlink stream rate of 4Hz. This means it
kept using DMA even with tx_dma_enabled set to false. The result was
that the automatic flow control code never got a chance to run and we
didn't switch back to non-DMA for these low baudrate contended UARTs
 2021-06-05 19:03:03 +10:00
Andrew Tridgell
3128d71aac HAL_ChibiOS: display uart even when not initialised 
don't rely on thread allocation for uart info display
 2021-06-05 18:52:33 +10:00
Andrew Tridgell
c34d8e80e9 HAL_ChibiOS: fixed serial info indexing for EMPTY uarts 2021-06-05 18:52:33 +10:00
Andrew Tridgell
6fab8feeae HAL_ChibiOS: implement uart_info per-uart 
this allows for some UARTs to be of EMPTY type
 2021-06-05 18:52:33 +10:00
Andrew Tridgell
23cf128541 HAL_Empty: implement uart_info() 2021-06-05 18:52:33 +10:00
Andrew Tridgell
d8a6d9c5c4 AP_HAL: added uart_info() method 2021-06-05 18:52:33 +10:00
Andrew Tridgell
135a4d2c83 HAL_ChibiOS: fixed order and labelling of @SYS/uarts.txt 2021-06-05 18:52:33 +10:00
Andrew Tridgell
71f207403e AP_Common: make angles in degrees end in _deg 
to make it obvious it is not radians
 2021-06-05 13:05:30 +10:00
Andrew Tridgell
eba1d499d4 AP_SpdHgtControl: added get_max_sinkrate() 2021-06-05 13:05:30 +10:00
Andrew Tridgell
a789bb372b AP_TECS: added get_max_sinkrate() API 2021-06-05 13:05:30 +10:00
Andrew Tridgell
a895bc1846 HAL_ChibiOS: reduce flash on VRBranin-v51 2021-06-05 13:05:30 +10:00
Andrew Tridgell
154ae64e63 AP_Math: support either polarity in linear_interpolate() 2021-06-05 13:05:30 +10:00
Peter Barker
d77d258442 AP_Math: add tests for the sqrt_controller 2021-06-04 23:00:19 +10:00
yaapu
c615706971 AP_Frsky_Telem: added a parameter to set the default FRSky sensor ID for passthrough telemetry 2021-06-03 13:58:55 +10:00
honglang
847ce3b311 AP_HAL_ChibiOS: CUAV X7/Nora: use icm42688 instead of bmi088 2021-06-03 13:57:27 +10:00
Randy Mackay
3f77c52720 AP_BoardConfig: minor change to BRD_IMU_TARGTEMP param desc 
Users should reboot if the param is changed to -1 because the heater pin could be left on
 2021-06-02 18:17:59 +10:00
yaapu
870c280946 AP_Frsky_Telem: upgraded SERIAL_PROTOCOL 4 telemetry to 2 bytes data IDs 
This upgrades standard SPort telemetry from older 1byte IDs to newer 2bytes IDs.

Older 1 byte data IDs are not supported by the FRSky ETHOS ecosystem so this
migration is required to allow ArduPilot to seamlessly work with ETHOS.
This migration requires users to do a new sensor discovery in OpenTX.
 2021-06-02 17:33:15 +10:00
yaapu
a5e1a45e7a AP_Frsky_Telem: added hud throttle [-100,100] to frame 0x5001 scaled to [-63,63] on 7bits 2021-06-02 17:30:09 +10:00
Siddharth Purohit
cd5b764fd8 AP_NavEKF3: use first usable compass index to set magSelectIndex 2021-06-02 17:10:19 +10:00
Siddharth Purohit
124eaf1a38 AP_NavEKF2: use first usable compass index to set magSelectIndex 2021-06-02 17:10:19 +10:00
Siddharth Purohit
a52f04ddde AP_DAL: add interface for first usable compass 2021-06-02 17:10:19 +10:00
Siddharth Purohit
1d29619e51 Revert "AP_Arming: check for only first compass being disabled" 
This reverts commit d343c569c2.
 2021-06-02 17:10:19 +10:00
Siddharth Purohit
8590bfea63 AP_Compass: use first available compass in priority list 2021-06-02 17:10:19 +10:00
James O'Shannessy
1794eefd33 AP_Mission: Fixes crash in copter when uploading MAV_CMD_NAV_LAND with NaN as p4 
Uploading a mission created in QGC with MAV_CMD_NAV_LAND (instead of return to launch) results in crash of copter because p4 is not set.
 2021-06-02 17:04:38 +10:00
Andrew Tridgell
606c248e69 AP_HAL: fixed build on boards with no PWM 
this impacts mRoNexus builds
 2021-06-02 15:39:30 +10:00
Paul Riseborough
a5a25411da AP_NavEKF3: Remove unnecessary baro limiting 2021-06-02 11:13:16 +09:00
Paul Riseborough
124f016e5b AP_NavEKF3: Use parameter to set baro ground effect dead-zone 2021-06-02 11:13:16 +09:00
Paul Riseborough
76d0dcc25c AP_NavEKF3: Use common method for handling baro ground effect 2021-06-02 11:13:16 +09:00
Andrew Tridgell
dc9435a88d AP_NavEKF3: don't limit baro change when we are in fixed wing mode 2021-06-02 11:13:16 +09:00
Andrew Tridgell
ea6724aca5 AP_NavEKF2: don't limit baro change when we are in fixed wing mode 2021-06-02 11:13:16 +09:00
Andrew Tridgell
32b079911f AP_NavEKF2: use DAL APIs for takeoff/touchdown expected 2021-06-02 11:13:16 +09:00
Peter Barker
c00f110f3d AP_NavEKF3: use DAL APIs for takeoff/touchdown expected 2021-06-02 11:13:16 +09:00
Peter Barker
f4f713a04f AP_DAL: add takeoff and touchdown expected state 2021-06-02 11:13:16 +09:00
Peter Barker
9eeec61cec AP_AHRS: new APIs for takeoff/touchdown expected 
timeout handling now in AP_AHRS, and state stored in AHRS and
requested by AP_DAL
 2021-06-02 11:13:16 +09:00
CUAVcaijie
0ff38e1379 HAL_ChibiOS: CUAV ICM20649 on SPI6 bus replaced by ICM20689 
alternative IMUs for Nora and X7
 2021-06-02 10:49:55 +10:00
Andrew Tridgell
8701932670 HAL_ChibiOS: return zeros in dma.txt on first fetch 2021-06-01 11:36:07 +09:00
James O'Shannessy
89e4df485a AP_BattMonitor: Record and report UAVCAN Battery Info temperature correctly 2021-06-01 12:35:24 +10:00
Iampete1
c71163680f SRV_Channel: add motor 1 - 4 to Rover function description, used on OMI frame type. 2021-06-01 11:12:40 +09:00
vierfuffzig
bed7d5f125 AP_OSD: add rangefinder panel 2021-06-01 11:33:05 +10:00
Peter Barker
15658362b5 AP_NavEKF3: make time-horizon OF data a local variable 
Saves 40 bytes of RAM per core on stm32
 2021-06-01 09:56:19 +10:00
Dr.-Ing. Amilcar do Carmo Lucas
0dbd05505b AP_BLHeli: Remove duplicated code, use existing AP_Math CRC function 2021-06-01 09:27:29 +10:00