Randy Mackay
5dd86bd7d7
Mission: update example sketch for p1's move to cmd structure
2014-03-19 12:10:49 +09:00
Randy Mackay
87126c9b71
Common: remove id and p1 from Location structure
...
id and p1 are now part of AP_Mission's Mission_Command structure
2014-03-19 12:10:46 +09:00
Randy Mackay
0dc3c9ab42
Mission: add p1 to command structure
...
mavlink_to_mission_cmd method extended to support plane including adding
parameter to allow the alt to be expressed in cm or meters
2014-03-19 12:10:45 +09:00
Randy Mackay
4c0ae63169
Mission: example sketch test replace_cmd method
2014-03-19 12:10:42 +09:00
Randy Mackay
61cc5e6b72
Mission: add replace_cmd method
2014-03-19 12:10:40 +09:00
Randy Mackay
ef21e32fbc
Mission: example sketch tests set current command
2014-03-19 12:10:37 +09:00
Randy Mackay
3cbbd4ebb9
Mission: add set current command method
2014-03-19 12:10:36 +09:00
Randy Mackay
c7ffd2db90
Mission: reduce unnecessary search for do-commands
...
do_cmd_all_done flag is set after all do-commands are complete
2014-03-19 12:10:33 +09:00
Randy Mackay
0c92d60406
Mission: command index increase to int16
...
Once more eeprom space is allocated this will allow more than 255
commands
2014-03-19 12:10:31 +09:00
Randy Mackay
85b979ede9
Mission: support do-jump num_times is -1
...
do-jump loops forever when num times is set to -1
2014-03-19 12:10:29 +09:00
Randy Mackay
c6c43847b6
Mission: example sketch tests set home command
2014-03-19 12:10:27 +09:00
Randy Mackay
9ef27955b5
Common: add location options masks
2014-03-19 12:10:20 +09:00
Randy Mackay
cc8554fa2b
Mission: fix example sketch
2014-03-19 12:10:18 +09:00
Randy Mackay
f4d8ccc128
Mission: add mavlink to cmd conversion methods
2014-03-19 12:10:17 +09:00
Randy Mackay
87c7d19f83
AP_Mission: special handling for cmd
2014-03-19 12:10:14 +09:00
Randy Mackay
e8db57ced3
AP_Mission: replace block read/write for eeprom
...
Also reserve command #0 for home position
2014-03-19 12:10:00 +09:00
Randy Mackay
fd009d0704
AP_Mission: tests added to example sketch
2014-03-19 12:09:59 +09:00
Randy Mackay
84b3497a82
AP_Mission: fixes to protect against endless loops
2014-03-19 12:09:57 +09:00
Randy Mackay
6086bc14be
AP_Mission: mostly working draft
2014-03-19 12:09:56 +09:00
Randy Mackay
4285eba297
AP_Mission: initial draft library
2014-03-19 12:09:54 +09:00
Randy Mackay
dd45647626
AC_PosControl: update some comments re leash lengths
2014-03-17 10:13:02 +09:00
Holger Steinhaus
345115fddd
AC_PosControl: fixed leash length calc for descent speed
2014-03-17 10:12:47 +09:00
Andrew Tridgell
6b5d27efbb
AP_GPS: fixed example builds with change to init()
2014-03-16 06:44:50 +11:00
Andrew Tridgell
68462025ba
RC_Channel: constrain norm_input() to -1 to 1
...
if RC is not properly calibrated we could get a value beyond 1, which
could cause some flight modes to exceed the roll/pitch limits of the
aircraft
2014-03-15 20:43:13 +11:00
Andrew Tridgell
9cf1fd46c8
AP_GPS: removed nav_setting default
...
not needed, and apparently caused issue with xcode 5.1
2014-03-14 07:49:56 +11:00
Paul Riseborough
dacba5d911
AP_NavEKF : Update default tuning parameters (for plane use)
2014-03-14 06:07:58 +11:00
Paul Riseborough
d0828d9c15
AP_NavEKF : Prevent bad user parameter causing incorrect GPS fusion
2014-03-14 06:07:58 +11:00
Paul Riseborough
a24bfc1b8a
AP_NavEKF : Use synthetic sideslip fusion during GPS denied operation with airspeed
2014-03-14 06:07:57 +11:00
Paul Riseborough
35811758d7
AP_NavEKF : Update comments and remove un-used function declarations
2014-03-14 06:07:57 +11:00
Andrew Tridgell
db48ed9218
AP_Compass: fixed showing of is_external for 2nd compass
2014-03-13 16:26:43 +11:00
Andrew Tridgell
beb6123576
GCS_MAVLink: send a "zero logs" message when no logs available
2014-03-11 17:12:22 +11:00
Andrew Tridgell
ecdd74d580
DataFlash: return number of logs as zero correctly
...
when we have no file based logs, report no logs :)
2014-03-11 17:11:58 +11:00
Andrew Tridgell
d9e8c34a89
GCS_MAVLink: allow for proxying of larger MAVLink messages on PX4
...
this makes it possible to deal with large MAVLink messages
2014-03-11 13:48:25 +11:00
Paul Riseborough
784034170d
AP_NavEKF : increased useage of helper functions
2014-03-10 21:54:03 +11:00
Paul Riseborough
7b3130cfcc
AP_NaVEKF : Enable operation without airspeed and compass
2014-03-10 21:53:09 +11:00
Paul Riseborough
3a5acb9cea
AP_NavEKF : improved on-ground, in-air check and GPS yaw alignment
2014-03-10 14:07:34 +11:00
Paul Riseborough
b47a11edf6
AP_NavEKF : improved static and on-ground mode selection logic
2014-03-10 04:39:59 +11:00
Paul Riseborough
15a44571c2
AP_NavEKF : enable operation without a compass for planes
2014-03-09 20:01:45 +11:00
Paul Riseborough
2019708056
AP_NavEKF : Make all compass use autodetect
2014-03-09 19:59:19 +11:00
Paul Riseborough
e485b246e7
AP_NavEKF : update comments
2014-03-09 19:59:18 +11:00
Paul Riseborough
c8bd415b00
AP_NavEKF : Add sideslip constraint to allow plane flight without magnetometer
2014-03-09 19:59:17 +11:00
Paul Riseborough
52fabc822f
AP_NavEKF : Add low speed magnetometer calibration option
2014-03-09 19:59:16 +11:00
Paul Riseborough
88b0364fcd
AP_TECS : Add protection for airspeed runaway due to pitch errors
2014-03-09 19:59:16 +11:00
priseborough
6ace31b6c1
AP_NavEKF : Fix bug that leaves height unconstrained in static mode
2014-03-09 19:27:21 +11:00
Mike McCauley
c90d3ff59e
Flymaple: RCOUtput disable_ch() now supports disabling outputs
2014-03-08 21:55:57 +11:00
Andrew Tridgell
794cc33e6a
GPS: added set_secondary() function
...
for preventing notify updates for 2nd GPS
2014-03-08 21:47:49 +11:00
Paul Riseborough
94ff7522fc
AP_NavEKF : Fix bug in initial East mag field state variance
2014-03-08 07:44:34 +11:00
Andrew Tridgell
63234d4c22
AP_Baro: fixed linux build of BMP085 driver
2014-03-07 09:33:43 +11:00
Randy Mackay
4cfe50b70c
Notify: brighter RGB LED when on battery power
2014-03-05 21:38:29 +09:00
Randy Mackay
1c457d8448
Mount: add get_mode and set_mode_to_default methods
2014-03-05 16:01:11 +09:00
Andrew Tridgell
dd502e98b4
RC_Channel: added support for separate wheel steering channels on planes
2014-03-05 12:57:50 +11:00
Andrew Tridgell
a788405c8b
RC_Channel: added percent_input() function
...
useful for plane flaps
2014-03-05 09:17:50 +11:00
Randy Mackay
25ee5d5dc8
AC_AttControl: smoothing_gain to angle_ef_roll_pitch_rate_ef_yaw_smooth
...
pair-programmed with lthall
2014-03-04 22:23:14 +09:00
lthall
15f88c2a2b
AC_AttControl: Stabilize input shaping
2014-03-04 21:52:18 +09:00
Andrew Tridgell
5f85e7af6a
HAL_PX4: switch to new serial port for 2nd GPS
2014-03-04 20:34:44 +11:00
Andrew Tridgell
af2f72acb0
HAL_SITL: honor SIM_GPS2_ENABLE option
2014-03-03 07:07:29 +11:00
Andrew Tridgell
7a52938f68
SITL: added SIM_GPS2_ENABLE option
2014-03-03 07:07:09 +11:00
Mike McCauley
be34e0358a
RC_Channel: Removed duplicate defines from RC_Channel.h
2014-03-03 06:34:34 +11:00
Andrew Tridgell
449d09051e
AP_NavEKF: cope with compass going offline while in flight
2014-03-02 14:32:10 +11:00
Andrew Tridgell
77f91e6250
AP_NavEKF: don't assume the number of gyros == number of accels
2014-03-02 13:53:19 +11:00
Paul Riseborough
ebb3cc3348
AP_NavEKF : Use average of dual IMU gyro data when available
2014-03-02 13:28:44 +11:00
Paul Riseborough
a39d00fc13
AP_NavEKF : Fix bug that prevents Zacc bias state variance being updated
2014-03-02 13:27:22 +11:00
Paul Riseborough
573b3210dd
AP_NavEKF : Add div0 protection to the IMU1_weighting calc
2014-03-02 08:10:06 +11:00
Paul Riseborough
bd152d332c
AP_NavEKF : Add accel aliasing protection
2014-03-02 08:10:04 +11:00
Andrew Tridgell
853271dd37
Replay: moved replay tool into Tools/Replay
2014-03-01 14:30:55 +11:00
Andrew Tridgell
295cd9adba
AP_NavEKF: give a sensible error for no such file on replay
2014-03-01 14:24:51 +11:00
Paul Riseborough
854f013146
AP_NavEKF : Fixes zero compass offsets on initialisation
2014-02-28 19:43:12 +11:00
Andrew Tridgell
cc4c443b32
SITL: simulate dual accel/gyro
2014-02-28 17:30:38 +11:00
Jonathan Challinger
e81d2e9584
AP_InertialSensor: Correct out-of-bounds array access that was causing SITL to crash
2014-02-28 17:25:54 +11:00
Andrew Tridgell
736201689b
AP_NavEKF: only use the active accel from DCM if fly_forward is set
2014-02-27 17:40:13 +11:00
Andrew Tridgell
aaaae9a222
AP_AHRS: added get_fly_forward() method
...
will be used to detect a copter
2014-02-27 17:39:49 +11:00
Paul Riseborough
62eff63267
AP_NavEKF : Increase the tuning range for magnetometer measurement noise
2014-02-27 17:20:38 +11:00
Andrew Tridgell
9a5ecc9541
AP_AHRS: use primary accel for accel_ef
...
Logs from Randy show that the copter INav code can't handle the
accelerometer sensor changing.
2014-02-27 16:28:37 +11:00
Andrew Tridgell
2c85a7ba56
AP_InertialSensor: expose get_primary_accel() for use in AHRS
2014-02-27 16:27:46 +11:00
Andrew Tridgell
cf148fa76c
AP_Compass: improved COMPASS_ORIENT and COMPASS_EXTERNAL for Pixhawk
2014-02-27 12:46:27 +11:00
Andrew Tridgell
a9e683dada
AP_NavEKF: use the accelerometer chosen by DCM for each step
2014-02-27 09:41:48 +11:00
Andrew Tridgell
b53496d470
AP_AHRS: choose the best accelerometer at each drift correction step
...
this greatly reduces the impact of aliasing on accelerometers by
choosing the accelerometer that produces the smallest error term in
DCM. The difference can be quite dramatic on the Pixhawk.
2014-02-27 09:41:28 +11:00
Andrew Tridgell
0b45d2bc06
AP_AHRS: removed the AHRS_GPS_DELAY parameter
...
the best value has turned out to be 1, and tweaking it has not turned
out to be useful, so this simplifies the code in preparation for
adding the anti-aliasing handling with multiple accelerometers
2014-02-27 08:57:44 +11:00
Paul Riseborough
78a1cac560
AP_NavEKF : Improved heading and magnetic field state initialisation
2014-02-27 08:12:10 +11:00
Paul Riseborough
d83b382e59
AP_NavEKF : Fix variance constraint bug
...
Constraining variances to a minimum value of 1e-9 was causing problems
with gyro bias and angular accuracy in noisy GPS environments.
Because the constraint is applied after every covariance prediction
and correction, a lower value of 0 is more appropriate.
2014-02-27 08:12:03 +11:00
Andrew Tridgell
8b59e564ba
AP_NavEKF: improved replay timing
2014-02-27 08:11:04 +11:00
Andrew Tridgell
840f1b9a1e
AP_InertialSensor: make HIL timing more accurate
...
needed for 400Hz replay
2014-02-27 08:10:42 +11:00
Andrew Tridgell
66f238c0da
AP_NavEKF: support 400Hz replay from 50Hz logs
2014-02-26 19:34:01 +11:00
Andrew Tridgell
3fa2207a2d
AP_HAL: allow for microsecond resolution in scheduler->stop_clock()
...
this makes 400Hz in the replay code possible
2014-02-26 19:33:39 +11:00
Andrew Tridgell
6fc5c12f1d
AP_AHRS: remove unused variable
2014-02-26 10:28:12 +11:00
Andrew Tridgell
866e32f059
AP_Motors: removed unused variable
2014-02-26 09:40:39 +11:00
Andrew Tridgell
e410733682
DataFlash: added GPS2 logging
2014-02-26 09:19:00 +11:00
Andrew Tridgell
0115b9fa07
HAL_SITL: support a 2nd GPS
2014-02-26 08:19:47 +11:00
Andrew Tridgell
836f473db2
HAL_FLYMAPLE: no uartE
2014-02-26 08:19:20 +11:00
Andrew Tridgell
58d5454d65
HAL_Empty: no uartE
2014-02-26 08:19:18 +11:00
Andrew Tridgell
6c74ca58c3
HAL_AVR: no uartE
2014-02-26 08:19:15 +11:00
Andrew Tridgell
4cb61f1f08
AP_HAL: support uartE
2014-02-26 08:18:20 +11:00
Andrew Tridgell
bf2dd141e9
HAL_PX4: support uartE for 2nd GPS
2014-02-26 08:18:11 +11:00
Andrew Tridgell
63874dfffd
AP_NavEKF: set fix type in GPS replay
2014-02-25 21:10:49 +11:00
Andrew Tridgell
d7b2a09919
AP_GPS: added fix type to setHIL
2014-02-25 21:10:30 +11:00
Andrew Tridgell
09cce5d24e
AP_NavEKF: fixed replay with current copter logs
2014-02-25 20:56:53 +11:00
Jonathan Challinger
f321a5f241
AP_AHRS: Change airspeed_estimate to const in children of AP_AHRS
...
Allows roll/pitch controllers to use DCM's airspeed estimate. Thanks to Kevin Hester for assistance in finding this.
2014-02-25 18:49:16 +11:00
Paul Riseborough
72a91ccbca
AP_NavEKF : Prevents aliasing triggering innovation consistency check failures
2014-02-25 15:55:44 +11:00
Andrew Tridgell
7a6f671659
AP_GPS: added have_vertical_velocity() function
...
for use by EKF
2014-02-24 18:24:10 +11:00
Andrew Tridgell
a273951f70
HAL_Linux: added missing Util.cpp
2014-02-24 11:59:24 +11:00