aepko/Ardupilot2
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
45,401 Commits 72 Branches 509 Tags 683 MiB
b5688c023c
Commit Graph

24784 Commits

Author SHA1 Message Date
Randy Mackay
20f1603b73 AP_NavEKF: source skips compass pre-arm check 2020-12-21 16:56:38 +09:00
Randy Mackay
4998b536b4 AP_NavEKF: source returns YawSource None if COMPASS_USE all zero 2020-12-21 16:56:38 +09:00
Randy Mackay
dfd1c23cd3 AP_NavEKF: source format fix 2020-12-21 16:56:38 +09:00
Randy Mackay
39be85cef4 AP_NavEKF3: integrate Source loss of init 2020-12-21 16:56:38 +09:00
Andrew Tridgell
218c0e4385 AP_NavEKF: Source's active_source_set becomes index 2020-12-21 16:56:38 +09:00
Andrew Tridgell
89f9b9e9b0 AP_NavEKF3: use AP_Enum to make code clearer 2020-12-21 16:56:38 +09:00
Mark Whitehorn
7446a9c33c AC_AttitudeControl: make relax_attitude_controllers() non-virtual 2020-12-21 12:56:24 +11:00
Mark Whitehorn
cc2c631d23 AC_AttitudeControl: add AC_AttitudeControl_TS 
move tailsitter body-frame roll input method to new subclass
override relax_attitude_controllers in AttitudeControl_TS
 2020-12-21 12:56:24 +11:00
Andrew Tridgell
7f3a851dd3 SRV_Channel: added support for rear motor tilt 2020-12-21 12:05:50 +11:00
Tatsuya Yamaguchi
4dc5162d0a AP_RangeFinder: change i2c reading frequency to 50Hz 2020-12-19 08:14:54 -03:00
ashvath
54708d916b AP_RangeFinder: TFminiPlus driver outputs init failure to ground station 2020-12-19 08:14:54 -03:00
Tatsuya Yamaguchi
b0ee6393ae AP_RangeFinder: TFminiPlus: set frame rate to 250hz 2020-12-19 08:14:54 -03:00
Dr.-Ing. Amilcar do Carmo Lucas
d76825feeb GCS_MAVLink: adapt to upstream changes in the distance_sensor mavlink message 2020-12-19 19:54:03 +11:00
Tom Pittenger
f670f7a9b6 AP_HAL_ChibiOS: change ADSB to use param ADSB_PORT instead of define 2020-12-17 23:24:04 -08:00
Tom Pittenger
5c98e18236 AP_HAL_CubeORange-periph: enable HAL_PERIPH_ALLOW_MAVLINK_UART_OR_USB_REBOOT_CMD on USB 2020-12-18 06:59:09 +11:00
Peter Barker
6dfd2f2ff9 AP_NavEKF3: use use_EKFGSFYaw to reduce code duplication 2020-12-17 16:00:29 +09:00
Andrew Tridgell
a31ea88ff5 SITL: use async SOAP requests for flightaxis 
this greatly improves performance for cygwin
 2020-12-17 16:13:55 +11:00
Andrew Tridgell
8d6d5c6b49 SITL: removed flightaxis threading 2020-12-17 16:13:55 +11:00
Andrew Tridgell
b4201436dd HAL_ChibiOS: fixed flash space on 16k bl boards 
this avoids the stm32_flash_recent_erase() function which added around
800 bytes to the bootloader. It is not needed
 2020-12-17 12:51:25 +11:00
bnsgeyer
62758ffd99 AP_Motors: Dual-heli-keep intermeshing from using DCP to yaw mixer 2020-12-16 19:52:23 -05:00
PittRBM
3f405590c7 AP_Motors: Dual Heli-add support for intermeshing rotor 2020-12-16 19:52:23 -05:00
bnsgeyer
ebd83b756b AP_Motors: add DCP trim feature for Dual Heli 2020-12-17 09:01:02 +11:00
Peter Barker
f12191b4b1 AP_Param: fix typo 2020-12-16 19:30:29 +11:00
Peter Barker
840c386a33 AP_Param: add _FLAG to AP_PARAM_NO_SHIFT 
Just for consistency with the other flags
 2020-12-16 19:30:29 +11:00
Randy Mackay
a2cca60beb AP_NavEKF3: constify EKFGSF_getYaw 2020-12-16 19:18:29 +11:00
Randy Mackay
754002525e AP_NavEKF: constify EKFGSF_yaw members 2020-12-16 19:18:29 +11:00
Randy Mackay
0c3fcfd9d6 AP_NavEKF3: add missing break to case statements 2020-12-16 19:18:29 +11:00
Randy Mackay
9cb529cfd6 AP_NavEKF3: minor formatting fix 
also replace tab with spaces
 2020-12-16 19:18:29 +11:00
Sebastian Witt
6cfaae4e7d AP_HAL_ChibiOS: Support for Diatone MambaF405 MK2 2020-12-16 19:07:07 +11:00
Andy Piper
e6d0e38129 AP_RCProtocol: allow handshake to initiate RC connection. Support listen-only SRXL2 devices. 
only bootstrap when SRXL2 is the only configured protocol (RC_PROTOCOLS=256)
remove spurious 0 initializers
 2020-12-16 18:06:49 +11:00
李孟晓
aae2d0082d AP_BattMonitor_UAVCAN: Fix issue with multiple batteries not working 2020-12-16 12:44:21 +11:00
Andrew Tridgell
c504e2db04 AP_Motors: added disable_yaw_torque() method 
this is used for tilt-vectored quadplanes to use only vectoring for
yaw control. This avoids some nasty transition issues
 2020-12-16 08:45:11 +11:00
Paul Riseborough
908b348c31 AP_NavEKF3: Fix typo in enum label 2020-12-15 19:29:16 +11:00
Randy Mackay
e819dbdd64 AP_NavEKF3: add EKFGSF_getYaw to reduce duplicate code 2020-12-15 19:29:16 +11:00
Randy Mackay
c2edae905f AP_NavEKF3: simplify logic when updating yawAngDataStatic 2020-12-15 19:29:16 +11:00
Randy Mackay
843ddb4fdc AP_NavEKF3: minor format fix 2020-12-15 19:29:16 +11:00
Paul Riseborough
a9e76d44af AP_NavEKF3: Clean up yaw fusion logic 2020-12-15 19:29:16 +11:00
Paul Riseborough
ccfd89240b AP_NavEKF3: Fix error in calculation of static 312 order yaw reference 2020-12-15 19:29:16 +11:00
Peter Barker
44cafa0dcc RC_Channel: add auxillary function to change to FBWA 2020-12-15 19:14:33 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
f77ab30f7a Revert "AP_NavEKF3: Remove unsupported parameter unit descriptions" 
This reverts commit 4f4a2f446d.
Makes more sense to add those to the list of supported units
 2020-12-15 18:22:36 +11:00
Andrew Tridgell
2e18334165 HAL_SITL: fixed baudrate 0 set in SITL 
this fixes MSP sensors in SITL with real uarts
 2020-12-15 11:36:16 +11:00
Andrew Tridgell
7b6392fcb5 HAL_Empty: fixed build 2020-12-15 10:32:46 +11:00
Andrew Tridgell
d6c5fc36d8 HAL_Linux: only init serial(0) 
we should not pre-init all uarts, it wastes memory if unused
 2020-12-15 10:32:46 +11:00
Andrew Tridgell
19723e6e75 AP_HAL: make uart pointers private 
this ensures they cannot be used by library or vehicle code, so we
will be able to remove them in future
 2020-12-15 10:32:46 +11:00
Andrew Tridgell
195ec0316a AP_HAL: fixed example fw for SERIAL naming 2020-12-15 10:32:46 +11:00
Andrew Tridgell
6249abaf8f RC_Channel: fixed example firmware 2020-12-15 10:32:46 +11:00
Andrew Tridgell
5406699ec8 AP_SerialManager: removed unnecessary uart pointer in state structure 2020-12-15 10:32:46 +11:00
Andrew Tridgell
348dfeff6e HAL_Linux: use a loop for serial tick 2020-12-15 10:32:46 +11:00
Andrew Tridgell
bf546f363d HAL_ChibiOS: don't init serial 1 and 3 
these should not be treated as special. Initialising them early just
wastes memory if the end up not being used
 2020-12-15 10:32:46 +11:00
Andrew Tridgell
6df118e7b4 GCS_MAVLink: convert to using hal.serial() instead of hal.uartX 2020-12-15 10:32:46 +11:00
Andrew Tridgell
23e629715e AP_SerialManager: convert to using hal.serial() instead of hal.uartX 2020-12-15 10:32:46 +11:00
Andrew Tridgell
cf187ff837 AP_HAL_SITL: convert to using hal.serial() instead of hal.uartX 2020-12-15 10:32:46 +11:00
Andrew Tridgell
db76eebd85 AP_HAL_Linux: convert to using hal.serial() instead of hal.uartX 2020-12-15 10:32:46 +11:00
Andrew Tridgell
95c0852b13 AP_HAL: convert to using hal.serial() instead of hal.uartX 2020-12-15 10:32:46 +11:00
Andrew Tridgell
e54fc4b0de AP_HAL_ChibiOS: convert to using hal.serial() instead of hal.uartX 2020-12-15 10:32:46 +11:00
Andrew Tridgell
e02047861a AP_GPS: convert to using hal.serial() instead of hal.uartX 2020-12-15 10:32:46 +11:00
Andrew Tridgell
0f5a75f5b9 AP_BoardConfig: convert to using hal.serial() instead of hal.uartX 2020-12-15 10:32:46 +11:00
Andrew Tridgell
8678759da4 AP_HAL: added hal.serial() access to uarts 
this gives access to serial ports in the SERIALn_ order. It is inlined
by the compiler so using hal.uartB and hal.serial(3) generates
idential code on stm32 (tested on H7).

This is a step towards eliminating hal.uartX completely and the
horrible uartB ordering
 2020-12-15 10:32:46 +11:00
Jaaaky
4ec1c2ea67 AP_IOMCU: Remove duplicate includes from AP_IOMCU.cpp 2020-12-15 10:01:54 +11:00
Andrew Tridgell
8b8029fdfe AP_Param: cope better with flooding the save queue with one param 2020-12-14 18:53:02 +11:00
Andrew Tridgell
5a8acea0dd AP_Param: fixed lockup in scripting due to save queue 
this is a quick fix for a lockup in scripting due to the mission API
holding the scheduler semaphore when it is updating the mission count
parameter
 2020-12-14 18:53:02 +11:00
Phillip Kocmoud
ce87b62dcc AP_Periph: Add alternate ordering of NCP5623 LED colors 2020-12-12 14:57:35 +11:00
Peter Barker
7449b3eea4 AP_HAL_SITL: fix help output 2020-12-12 10:01:20 +11:00
Paul Riseborough
8f32430294 AP_NavEKF3: Fix white spaces 2020-12-11 15:21:41 +11:00
Paul Riseborough
bdc202378a AP_NavEKF3: fix white space 2020-12-11 15:21:41 +11:00
Paul Riseborough
ed17d8e48f AP_NavEKF3: Improve parameter display names 2020-12-11 15:21:41 +11:00
Paul Riseborough
171f0b399f AP_NavEKF3: Remove commented code 2020-12-11 15:21:41 +11:00
Andrew Tridgell
b86c014400 AP_NavEKF3: rename drag parameters to start with EK3_DRAG_ 2020-12-11 15:21:41 +11:00
Andrew Tridgell
3e2ff71750 AP_Baro: rename params to suit new BARO param naming 2020-12-11 15:21:41 +11:00
Paul Riseborough
47d4506e68 AP_NavEKF3: Add drag and sideslip innovation logging 2020-12-11 15:21:41 +11:00
Paul Riseborough
b258cb0539 SITL: Add momentum drag to Z axis to work around thrust model deficiencies 2020-12-11 15:21:41 +11:00
Paul Riseborough
a907c10733 SITL: Add momentum drag to multicopter model 2020-12-11 15:21:41 +11:00
Andrew Tridgell
b7f68e87b4 SITL: added barometer wind coefficients 2020-12-11 15:21:41 +11:00
Andrew Tridgell
567de3047b AP_Baro: added modelling of baro wind effects in SITL 2020-12-11 15:21:41 +11:00
Andrew Tridgell
e552fd7e5a AP_Baro: adjust for new baro params in SITL 2020-12-11 15:21:41 +11:00
Andrew Tridgell
3456bdb4eb SITL: added a separate param class for SITL baro params 
makes it easier to add more
 2020-12-11 15:21:41 +11:00
Andrew Tridgell
9563c1ed33 AP_Baro: rename wind coefficient params to be clearer 2020-12-11 15:21:41 +11:00
Paul Riseborough
4884476c09 AP_NavEKF3: Formatting and comment fixes 2020-12-11 15:21:41 +11:00
Andrew Tridgell
be4d10a95e AP_NavEKF3: rework parameter handling 
and fixed indentation
 2020-12-11 15:21:41 +11:00
Andrew Tridgell
1c1c067dee AP_Baro: rework to separate out wind coefficient params 
- disable on low flash boards
 - add an enable parameter per baro for wind coeffients
 2020-12-11 15:21:41 +11:00
Paul Riseborough
5da62aeaa2 AP_NavEKF3: Fix CI build errors 2020-12-11 15:21:41 +11:00
Paul Riseborough
0d2c235027 AP_NavEKF3: Fix #define typo 2020-12-11 15:21:41 +11:00
Paul Riseborough
ab05e8ed4a AP_NavEKF3: Update param descriptions 2020-12-11 15:21:41 +11:00
Paul Riseborough
4f4a2f446d AP_NavEKF3: Remove unsupported parameter unit descriptions 2020-12-11 15:21:41 +11:00
Paul Riseborough
0be0498801 AP_Baro: Add static pressure positoin error correction 2020-12-11 15:21:41 +11:00
Paul Riseborough
3a0105fcc3 AP_AHRS: Add accessor function for body frame airspeed vector 2020-12-11 15:21:41 +11:00
Paul Riseborough
b372d62f35 AP_NavEKF2: Add accessor function for body frame airspeed vector 2020-12-11 15:21:41 +11:00
Paul Riseborough
c9ab4b18b0 AP_NavEKF3: Add multicopter wind estimation 2020-12-11 15:21:41 +11:00
Peter Barker
ab444e1d26 RC_Channel: correct function initialisation 2020-12-11 15:21:22 +11:00
Andrew Tridgell
ac4a05ffbf AP_NavEKF3: fixed null dereference of airspeed 
this caused a segfault in replay
 2020-12-11 14:22:46 +11:00
Andrew Tridgell
2071a19a40 AP_NavEKF3: only fuse airspeed if healthy 2020-12-11 09:59:49 +11:00
Andrew Tridgell
5e72907730 AP_NavEKF2: only fuse airspeed if healthy 2020-12-11 09:59:49 +11:00
Andrew Tridgell
d16af5448b AP_DAL: added healthy() method for airspeed 2020-12-11 09:59:49 +11:00
Peter Barker
ca41a19072 AP_AHRS: AHRS itself must also be healthy to arm, not just the "backend" 2020-12-11 09:55:40 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
1d0e7d2974 GCS_MAVLink: Added cells 11...14 voltage information (13 and 14 are 0 for now) 2020-12-11 06:37:32 +11:00
yaapu
89f0ed2f8f AP_Scripting: added bindings and example for waypoint info 2020-12-10 12:39:44 +11:00
yaapu
edf2291fb0 AP_Vehicle: added getters for waypoint info, refactored osd publish_nav_info() 2020-12-10 12:39:44 +11:00
Tom Pittenger
68b2982cc6 AP_HAL_ChibiOS: CubeBlack/Orange-periph to use default HAL_SUPPORT_RCOUT_SERIAL 2020-12-09 07:53:09 -08:00
Tom Pittenger
6630645915 AP_HAL: ap_periph should disable HAL_SUPPORT_RCOUT_SERIAL by default 2020-12-09 07:53:09 -08:00
Peter Barker
449b0fb145 SITL: add simulated SF45B 2020-12-09 21:32:36 +11:00