aepko/Ardupilot2
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
60,894 Commits 72 Branches 509 Tags 683 MiB
aba5ec6854
Commit Graph

433 Commits

Author SHA1 Message Date
Andrew Tridgell
992016069a AP_InertialSensor: fixed watchdog on AHRS trim gyro wait 2019-08-19 14:37:46 +10:00
Andrew Tridgell
e1ce735886 AP_InertialSensor: special check for CubeBlack to force INS_USE3=1 
this will cope with users loading old parameter files
 2019-07-31 12:53:57 +10:00
Andrew Tridgell
123800ccd2 AP_InertialSensor: default INS_USE3 to 1 2019-07-31 12:53:57 +10:00
Andrew Tridgell
8e5c0fa32b AP_InertialSensor: disable kill IMUs with HAL_MINIMIZE_FEATURES 2019-07-07 19:03:01 +10:00
Andrew Tridgell
3444e82ef9 AP_InertialSensor: added RC switch for killing IMUs 2019-07-07 19:03:01 +10:00
Andrew Tridgell
053f0cb689 AP_InertialSensor: try much harder to get all IMU samples 
this we ensures we get new data for all active IMUs on each loop,
rather than sometimes returning with some IMUs not having data.

This matters as not having a sample on an IMU for a single loop can
cause an EKF IMU failover, which will degrade the learned bias
variances

The issue is usually only seen under high load, such as requesting a
loop rate beyond what the hardware is capable of
 2019-07-07 19:03:01 +10:00
Andy Piper
36878e9b3c AP_InertialSensor: Allow all filter frequencies to be 16bit. 2019-06-06 17:09:17 +10:00
Andy Piper
18d403c3ac AP_InertialSensor: Rework notch filter allocation and sampling 
https://github.com/ArduPilot/ardupilot/issues/11346

Allocate a notch filter per-IMU.
Update the notch filters in the backend at the sensor sample rate.
Allow raw logging of post-filtered gyro and accel values.
 2019-06-06 17:09:17 +10:00
Andrew Tridgell
aef343bfd0 AP_InertialSensor: removed old mRoControlZeroF7 config 2019-05-30 15:39:57 +10:00
Andrew Tridgell
039e7366b0 AP_InertialSensor: support new sensor config setup 2019-05-30 15:39:57 +10:00
Andrew Tridgell
3823ba539c AP_InertialSensor: rename to EXPECT_DELAY_MS() 2019-05-15 15:33:48 +10:00
Andrew Tridgell
02326ac52c AP_InertialSensor: use EXPECT_DELAY() macro 2019-05-15 15:33:48 +10:00
Phillip Kocmoud
6665e4c0a7 AP_InertialSensor: probe IMUs for mRoControlZeroF7 2019-05-10 15:05:42 +10:00
Jaaaky
47c65314fb AP_InertialSensor: fix accelcalsimple watchdog 2019-05-01 14:23:20 +10:00
Andrew Tridgell
034d476fa5 AP_InertialSensor: prevent watchdog in accelcal 2019-04-22 16:53:35 +10:00
Andrew Tridgell
9c48d001ac AP_InertialSensor: skip gyro cal on watchdog reset 2019-04-22 16:53:35 +10:00
Andrew Tridgell
c988eb2fd9 AP_InertialSensor: don't set INS_ENABLE_MASK to found IMU mask 2019-04-22 14:56:59 +10:00
L Kurt Shaw
d08ab88dea INS: AP_InertialSensor comments for new cubes 
Correct comments ICM20648 should have been ICM20948
 2019-04-02 10:52:43 +11:00
Randy Mackay
5d8747c81d AP_InetialSensor: fixup ENABLE_MASK parameter desc 2019-03-27 13:14:48 +09:00
Andrew Tridgell
4a334d0ed7 AP_IneertialSensor: fixed startup race in SITL 2019-03-21 18:54:32 +11:00
Andrew Tridgell
0a718ba330 AP_IneertialSensor: fixed orientations and gyro scale factors for new Invensense IMUs 2019-03-21 18:54:32 +11:00
Siddharth Purohit
8c2d3945de AP_IneertialSensor: add support for custom accel scale 
adds support for 30g measurement on ICM20649
 2019-03-21 18:54:32 +11:00
Siddharth Purohit
3a833d9a90 AP_InertialSensor: fix rotation for ICM20649 2019-03-21 18:54:32 +11:00
L Kurt Shaw
8d75e8c5bb INS: AP_InertialSensor.cpp 
Fix typo in comments should be NFC
 2019-03-12 15:56:55 +09:00
Andrew Tridgell
81cd103073 AP_InertialSensor: probe for new v2 invensense IMUs 
also suppress LSM9DS0 whoami warnings, as these will now be common
with new IMUs

and make 20602 show up as a new devtype so we can distinguish it
 2019-03-11 12:40:21 +11:00
Siddharth Purohit
528c0b4d7c AP_InertialSensor: add drivers for register bank based Invensense Sensors 2019-03-06 20:47:10 +11:00
Siddharth Purohit
0cfcd0986e AP_InertialSensor: look for icm20602 for Pixhawk 2 series flight boards 2019-03-06 20:47:10 +11:00
Andrew Tridgell
07e2167996 AP_InertialSensor: setup for fmuv6 2019-02-26 16:18:26 +11:00
Tom Pittenger
9347e6d36f AP_InertialSensor: unify singleton naming to _singleton and get_singleton() 2019-02-10 19:09:58 -07:00
Andrew Tridgell
6048c10a7c AP_InertialSensor: added driver for BMI088 
setup for 1600 Hz accel sample, 2kHz gyro sample, 24g accel range
 2019-01-31 12:05:57 -08:00
Andrew Tridgell
9520f5f768 AP_InertialSensor: removed F4Light 2019-01-21 21:57:21 +11:00
Peter Barker
43e3acc954 AP_InertialSensor: remove use of never-set AP_HAL_PX4 and AP_HAL_VRBRAIN 2019-01-18 09:53:44 +11:00
Peter Barker
43e47f33e4 AP_InertialSensor: remove PX4 backend 2019-01-17 06:41:33 +11:00
Michael du Breuil
983356213a AP_InertialSensor: Remove unused parameter 2018-12-23 12:46:37 -08:00
Randy Mackay
6b3fa520b5 AP_InertialSensor: add range to POS param description 2018-12-13 20:14:01 +09:00
Andrew Tridgell
3de860f73b AP_InertialSensor: fixed orientation of 2nd OmnibusF7V2 IMU 2018-12-12 16:27:34 +11:00
Andrew Tridgell
89b8124560 AP_InertialSensor: added BMI055 IMU driver 2018-06-08 09:56:41 +10:00
Andrew Tridgell
bfa66c9397 AP_InertialSensor: detect two IMUs on FMUv5 2018-06-06 07:15:41 +10:00
Francisco Ferreira
8b32960d3e AP_InertialSensor: remove Qualcomm board support 2018-05-17 09:57:20 +10:00
Peter Barker
1a640e3405 AP_InertialSensor: parameterise sensor-rate logging, generalise it 
AP_InertialSensor: add parameters for push-to-log interval and count

AP_InertialSensor: rename BAT_RAW to BAT_OPT

This becomes a bitmask of options for the BatchSampler

AP_InertialSensor: rename 'fast sample' to 'sensorrate sample'

AP_InertialSensor: const sensor-rate filter method

AP_InertialSampler: remove hard-coding of sample rate multiplier

AP_InertialSensor: use parameter to enable/disable sensor-rate logging

AP_InertialSensor: use a parameter to control sensor-rate logging

AP_InertialSensor: allow backends to override sensor data multiplier

e.g. some accelerometers are sensitive over wider ranges than the default 16G

AP_Inertialsensor: correct sample rate multiplier
 2018-05-01 09:35:29 +10:00
Jacob Walser
ad4e928e7d AP_InertialSensor: add support for custom board orientations 2018-04-24 13:04:37 +01:00
Andrew Tridgell
ea2dc9b831 AP_InertialSensor: added OMNIBUSF7V2 INS sensors 
a dual-IMU board
 2018-04-12 11:50:44 +10:00
Peter Barker
aca87ab638 AP_InertialSensor: remove pointless initialisations 
AP_InertialSensor: avoid pointless zeroing in constructor

AP_InertialSensor is either in bss or is created via new (which zeroes
memory)
 2018-04-04 12:14:02 +01:00
Peter Barker
2396a248ed AP_InertialSensor: use ahrs singleton for simple accelcal 2018-04-02 23:25:05 +01:00
Andrew Tridgell
455c0e25e1 AP_InertialSensor: allow for HAL_INS_NONE 2018-03-02 12:52:50 +11:00
Andrew Tridgell
b61caa9c57 AP_InertialSensor: added SP01 board type 2018-02-14 18:27:00 +11:00
Peter Barker
096f7367bf AP_InertialSensor: add ins() to AP:: namespace 2018-02-13 17:15:05 +11:00
Andrew Tridgell
0e6497aa85 AP_InertialSensor: merged in Revo driver 2018-02-10 09:14:41 +11:00
Andrew Tridgell
ad8db6cda3 AP_InertialSensor: added sensor type ICM20789_SPI 2018-02-08 17:36:33 +11:00
Andrew Tridgell
b9e5649888 AP_InertialSensor: support PCNC1 2018-02-08 17:36:33 +11:00
Igor Anokhin
e6d4b2a087 AP_InertialSensor: add LSM9DS1 entry 
Enable LSM9DS1 in case it is selected
 2018-02-06 09:31:26 -08:00
LukeMike
502f19cbae VRBRAIN / AP_InertialSensor: added inertial sensors init for VR Brain boards 2018-02-05 08:26:49 +11:00
Andrew Tridgell
100363ba03 AP_InertialSensor: if no sensors found allow parameter change 2018-01-20 10:36:22 +11:00
Andrew Tridgell
c0c5f23aa5 AP_InertialSensor: added INS_ENABLE_MASK 
this allows for only a specified subset of IMUs to be probed, so you
can disable IMUs that aren't needed.

The back corresponds to bits in the order the IMUs are normally probed
on the board
 2018-01-20 10:36:22 +11:00
Andrew Tridgell
8ab35e8aca AP_InertialSensor: fixed MindPX-v2 orientation of IMU2 2018-01-15 11:46:02 +11:00
Andrew Tridgell
dcab40459d AP_InertialSensor: support MindPX-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell
febe414766 AP_InertialSensor: disable fast sampling on 2nd IMU on Pixracer 
it also hosts a mag, and gets lots of FIFO resets if we try to run it
at 8kHz
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
3fc095589c AP_InertialSensor: support ChibiOS FMUv4 2018-01-15 11:46:02 +11:00
Andrew Tridgell
39362a81ae AP_InertialSensor: support ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell
39c206ca03 AP_InertialSensor: limit delta-time from INS 
limit delta-time to 2x average time

DEBUG CODE - DO NOT MERGE
 2017-12-12 11:39:38 +11:00
Randy Mackay
38145f9541 AP_InertialSensor: fix param docs for notch and log settings 2017-12-12 07:59:41 +09:00
Peter Barker
161e2145cb AP_InertialSensor: tighten type of simple_accel_cal result 2017-12-01 17:01:10 +00:00
HeBin
efbb030494 AP_InertialSensor: add Robsense PhenixPro Devkit Board support 2017-11-22 10:10:21 -08:00
Peter Barker
9566abb3a8 AP_InertialSensor: add IMU batch sampling 2017-10-27 16:33:45 +11:00
Peter Barker
5096e2fca9 AP_InertialSensor: use df singleton, factor out log_{gyro,accel}_raw 2017-10-27 16:33:45 +11:00
Alexey Bulatov
069c98b8a9 AP_InertialSensor: Edge: add sensor's rotation YAW_90 2017-10-20 13:03:08 -07:00
Georgii Staroselskii
4f2d8f8df4 AP_InertialSensor: use ICM backend for Edge 2017-10-20 13:03:08 -07:00
Andrew Tridgell
6a6f9681ab AP_InertialSensor: allow for 1,1,1 accel scaling 
this supports simple accel calibration
 2017-10-10 10:57:38 +11:00
Andrew Tridgell
d5cab1140a AP_InertialSensor: added simple_accel_cal() 
this is useful for mass market vehicles where a full 3D accel cal is
too complex.
 2017-10-10 10:57:38 +11:00
Lucas De Marchi
caa4e3ee89 AP_InertialSensor: remove raspilot 2017-09-12 15:06:19 -07:00
Andrew Tridgell
7e1368f7a5 AP_InertialSensor: implement notch filter on gyro 2017-08-29 13:52:29 +10:00
Kevin Lopez Alvarez
ca3627c140 AP_InertialSensor: add ppro support 2017-07-24 13:47:06 +10:00
Randy Mackay
51fa8fb0bd AP_InertialSensor: resolve member init order compiler warning 2017-07-07 17:27:23 +09:00
Randy Mackay
edc9d4db5b AP_InertialSensor: increase accel filter to 20hz 2017-07-03 09:38:15 +09:00
Peter Barker
6ae86a0b8c AP_InertialSensor: use DataFlash should_log to determine raw logging 2017-06-29 15:26:27 +01:00
Leonard Hall
447b20efa5 AP_InertialSensor: reduce accel filter to 10hz 2017-06-01 14:53:48 +09:00
Andrew Tridgell
db25b6e966 AP_InertialSensor: estimate and log sensor rates for all IMUs 
this adds IMU.GHz and IMU.AHz log fields so we can see the actual
observed sensor rates of each IMU
 2017-05-01 15:06:46 +10:00
Andrew Tridgell
e62fdad12c AP_InertialSensor: added get_last_update_usec() 
this will be used by the inter-EKF scheduling changes
 2017-05-01 14:24:55 +10:00
Lucas De Marchi
2e4e4365d0 AP_InertialSensor: enable fast sampling for aerofc 2017-03-24 12:06:19 +11:00
Lucas De Marchi
87846fe049 AP_InertialSensor: use MPU6500 on aerofc 2017-03-24 12:06:19 +11:00
Andrew Tridgell
b86513f503 AP_InertialSensor: support AUAV21 board 2017-03-01 17:24:10 +11:00
Andrew Tridgell
01da36295d AP_InertialSensor: support the L3GD20H gyro 
this is used by the MRo Pixhawk1
 2017-01-31 07:39:36 +11:00
murata
2643e7e906 AP_InertialSensor: Unify from print or println to printf. 2017-01-27 18:20:22 +11:00
murata
d56bad781f AP_InertialSensor: change if statements to switch statement 
No functional change
 2016-12-24 12:23:59 +09:00
murata
398b7b83dd AP_InertialSensor: minor formatting fixes 
No functional change
 2016-12-24 12:23:58 +09:00
Andrew Tridgell
65b9b86099 AP_InertialSensor: unify MPU6000 and MPU9250 drivers 
make a single AP_InertialSensor_Invensense driver. This avoids a lot
of duplication and will save time as new varients are added
 2016-12-16 12:31:34 +11:00
Andrew Tridgell
0f984290c3 AP_InertialSensor: enable fast sampling by default on some boards 2016-11-25 17:59:54 +11:00
Andrew Tridgell
18d4286166 AP_InertialSensor: fixed pixfalcon 9250 detection 2016-11-18 14:24:39 +11:00
Andrew Tridgell
f3f1f6b0b6 AP_InertialSensor: fixed gyro orientation on l3gd20H on pixhawk 2016-11-16 20:33:56 +11:00
Francisco Ferreira
bfbb275577 AP_InertialSensor: on accel cal failure don't save values to zero 
When the accel calibration fails leave the previous values saved but set them to defaults (scale default is ones, not zeros) and notify the GCS
This fixes an arithmetic exception when doing a second accel cal after the first one failed
 2016-11-15 11:42:54 -08:00
Andrew Tridgell
624178f3be AP_InertialSensor: added INS_FAST_SAMPLE parameter 
this allows enable/disable of fast sampling per IMU, making
experimentation easier.

It also fixes the fast sampling to always average over 8 samples, and
fixes the 9250 to use the correct accumulator when not doing fast
sampling
 2016-11-15 21:16:40 +11:00
Andrew Tridgell
4ebf3309f7 AP_InertialSensor: auto-handle invensense sensor changes 
some boards swap out MPU6000 for MPU9250 or ICM20608
 2016-11-11 08:08:55 +11:00
Andrew Tridgell
70c27a85de AP_InertialSensor: on PH2 run the first MPU9250 at 8kHz 2016-11-10 13:04:15 +11:00
Andrew Tridgell
cb70bae167 AP_InertialSensor: use in-tree drivers for PH2SLIM 2016-11-10 11:44:52 +11:00
Andrew Tridgell
8a3f6a8902 AP_InertialSensor: use FIFO and implement fast sampling for MPU9250 2016-11-10 11:44:51 +11:00
Andrew Tridgell
e25a391a8f AP_InertialSensor: fixed typo 2016-11-09 17:08:15 +11:00
Andrew Tridgell
7137d5c6f2 AP_InertialSensor: switch pixracer to always use in-tree drivers 2016-11-09 17:08:14 +11:00
Andrew Tridgell
84c3e29891 AP_InertialSensor: use AP_HAL rotations for MPU6000 2016-11-09 17:08:14 +11:00
Andrew Tridgell
03b7bc9e65 AP_InertialSensor: use internal drivers for PHMINI 
this gets us fast sampling
 2016-11-09 17:08:12 +11:00
Andrew Tridgell
3d7d773883 AP_InertialSensor: added support for ICM20608 on Pixracer 2016-11-09 17:08:08 +11:00
Andrew Tridgell
2c1e9024f1 AP_InertialSensor: detect missing accels or gyros 2016-11-09 17:08:07 +11:00
Andrew Tridgell
106a91c64c AP_InertialSensor: use init_gyro() on startup 
this saves the calibration parameters which should be done on
calibration
 2016-11-09 17:08:07 +11:00
Andrew Tridgell
408593465f AP_InertialSensor: fixed rotation for mpu9250 on pixracer 2016-11-09 17:08:07 +11:00
Andrew Tridgell
790dd4769b AP_InertialSensor: simplify rotations for MPU9250 2016-11-09 17:08:07 +11:00
Lucas De Marchi
469efb00f6 AP_InertialSensor: save id for gyro and accel instances 
This allows each sensor to be uniquely identified in the system by using
either the index inside the backend or for those that use the Device
interface, to use the bus type, location, and device id.

We leave 16-bit for each sensor to be able to change its own
identification in future, which allows them to be changed in an
incompatible manner forcing a re-calibration.
 2016-11-09 17:08:05 +11:00
Lucas De Marchi
bbb9bfa95e AP_InertialSensor: save only gyro calibration 
When we are initializing the gyro and then saving the calibration we are
also saving the calibration values for the accelerometers. Right now
this is non-problematic, but we want to check that the ID of the
accelerometer corresponds to the ID of the sensor detected. If we also
save accel calibrations we would actually override the ID of the
accelerometer.

Rename the method to _save_gyro_calibration() and save only on gyro
values.
 2016-11-09 17:08:05 +11:00
Lucas De Marchi
ace61087a1 AP_InertialSensor: remove product_id 
We only leave the parameter there for backward-compatibility. However
product id on the inertial sensor is not much useful since it's only
kept for the first instance.

A better implementation per-gyro and per-accel is needed in order to
avoid problems with sensors taking the offsets configured for another
sensor.
 2016-11-09 17:08:05 +11:00
Andrew Tridgell
4ef92b5e39 AP_InertialSensor: enable all 3 IMUs on PH2 2016-11-09 17:08:04 +11:00
Andrew Tridgell
a5c5e033d2 AP_InertialSensor: fixed threading and locking in remaining backends 
use a backend semaphore for shared data and use thread per bus where
available
 2016-11-09 17:08:01 +11:00
Andrew Tridgell
b92c48548a AP_InertialSensor: added per-instance rotation for LSM9DS0 2016-11-09 17:08:00 +11:00
Andrew Tridgell
2df6ed08c2 AP_InertialSensor: added optional per-instance orientation 
this is needed for multi-sensor boards to get orientation right for
each sensor
 2016-11-09 17:08:00 +11:00
Andrew Tridgell
7832f1a1b6 AP_InertialSensor: allow for in-tree drivers for PX4 2016-11-09 17:07:58 +11:00
murata
c808ee2f49 Global: To nullptr from NULL. 
RC_Channel: To nullptr from NULL.

AC_Fence: To nullptr from NULL.

AC_Avoidance: To nullptr from NULL.

AC_PrecLand: To nullptr from NULL.

DataFlash: To nullptr from NULL.

SITL: To nullptr from NULL.

GCS_MAVLink: To nullptr from NULL.

DataFlash: To nullptr from NULL.

AP_Compass: To nullptr from NULL.

Global: To nullptr from NULL.

Global: To nullptr from NULL.
 2016-11-02 16:04:47 -02:00
priseborough
7460d97c9a AP_InertialSensor: Update parameter documentation 
Add brief description of body frame conventions.
 2016-10-27 14:54:45 +11:00
priseborough
54a431a51d AP_InertialSensor: Update position offset parameter documentation 
Notify users of the potential for velocity noise when using larger offset values..
Specific advice in terms of values has not been provided because it is highly dependent on Gyro noise levels.
 2016-10-27 14:54:43 +11:00
priseborough
6db93d8a21 AP_InertialSensor: Add parameters defining accelerometer position offset 2016-10-27 14:54:41 +11:00
Mathieu OTHACEHE
152edf7189 Global: remove mode line from headers 
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
 2016-10-24 09:42:01 -02:00
Gustavo Jose de Sousa
68fe536da3 AP_InertialSensor: use BMI160 for Intel Aero 2016-09-03 01:03:07 -03:00
Gustavo Jose de Sousa
cd0d65dc3f AP_InertialSensor: don't check {gyro,accel}_available twice 
That gives a slightly simpler code.
 2016-07-22 19:58:08 -03:00
Gustavo Jose de Sousa
69405cc99a AP_InertialSensor: fix timing debug macro 
- Use "INS_" prefix for the name in order to limit the scope for that macro.

- Don't define it in the code and check if it is defined instead of checking
  the value. With that, there's no need to touch the code for enabling debug,
  only a reconfiguration is necessary (e.g., `CXXFLAGS='-DINS_TIMING_DEBUG' waf
  configure ...`).
 2016-07-21 19:01:28 -03:00
Gustavo Jose de Sousa
ee7c40be61 AP_InertialSensor: BMI160: add backend 
The reason of defining BMI160_MAX_FIFO_SAMPLES as 8 can be found on the
following histogram of the number of samples in the FIFO on each read while
performing the accelerometer calibration process:

Samples Count   Freq Acc. Freq
------------------------------
      1  3842 0.1201  0.120111
      2 13172 0.4118  0.531904
      3  9065 0.2834  0.815300
      4  2710 0.0847  0.900022
      5  2231 0.0697  0.969769
      6   816 0.0255  0.995279
      7   137 0.0043  0.999562
      8    13 0.0004  0.999969
     13     1 0.0000  1.000000
 2016-07-15 16:46:06 -03:00
Gustavo Jose de Sousa
e85ac8b2c5 AP_InertialSensor: inform maximum gyro average difference 
While at it, define GYRO_INIT_MAX_DIFF_DPS.
 2016-06-27 17:22:43 -03:00
Gustavo Jose de Sousa
e6f62080f5 AP_InertialSensor: fix best_diff on gyro initialization 
Without this patch, if accel_diff.length() > 0.2f and j == 0, then
best_diff[k] would be zero forever since diff_norm[k] >= 0 for any j.
 2016-06-27 17:20:51 -03:00
Grant Morphett
34fa2a39bd AP_InertialSensor: Changing the default gyro filter from 10 to 4 
This change is only for Rovers.
 2016-06-16 14:37:55 +09:00
Lucas De Marchi
b067bce140 AP_InertialSensor: remove support for flymaple 2016-05-23 21:49:45 -03:00
Lucas De Marchi
7503c1b6d4 AP_InertialSensor: update doc about used ids 2016-05-23 21:49:45 -03:00
dgrat
41661f815f AP_Math: Replace the pythagorous* functions with a variadic template 
The new function can deal with a variable number of function parameters.
Additionally, I renamed the functions to norm(), because this is the
standard name used in several other projects.
 2016-05-10 11:41:26 -03:00
Andrew Tridgell
be41d402b5 AP_InertialSensor: added set of delta angle time for replay 2016-04-26 15:50:46 +10:00
Andrew Tridgell
4401cbec72 AP_InertialSensor: cope with zero delta angle time from Replay 2016-04-26 15:37:11 +10:00
mirkix
c3a6a56ebb AP_InertialSensor: Add second MPU9250 autodetection to BBBmini 2016-04-24 10:57:57 -03:00
ashwinvasudevan
e33812e1cb AP_InertialSensor: added missing brackets 2016-03-23 17:46:41 +09:00
raspilot
1d1d224c18 AP_InertialSensor: Enable dual IMU for raspilot 2016-03-18 21:51:37 -03:00
AndersonRayner
c9d5c548a6 Corrects a bracket error for the LSM9DS0 IMU 
Switches the probe of the accel and gyro so they boot correctly (was
failing the WHOAMI with a switched result)
 2016-02-25 20:08:01 -03:00
Jonathan Challinger
c454631be8 AP_InertialSensor: work around gyro and accel errors on startup 2016-02-19 16:40:52 +09:00
Lucas De Marchi
02a7fa5c2b AP_InertialSensor: MPU9250: use AP_HAL::Device abstraction 
This makes MPU9250 be almost the same as MPU6000 driver. Work has been
done here to make than similar so it's easier to spot the differences.
 2016-02-16 19:49:09 -02:00
Lucas De Marchi
d2b267d026 AP_InertialSensor: LSM9DS0: use AP_HAL::SPIDevice abstraction 2016-02-16 19:49:09 -02:00
Lucas De Marchi
58f4624f8c AP_InertialSensor: L3G4200D: use AP_HAL::I2CDevice abstraction 2016-02-16 19:49:09 -02:00
Lucas De Marchi
af846636e4 AP_InertialSensor: MPU60x0: use AP_HAL::Device abstraction 2016-02-16 19:49:09 -02:00
Lucas De Marchi
9c6bd38e91 AP_InertialSensor: sanitize includes 
Due to the way the headers are organized changing a single change in an
inertial sensor driver would trigger a rebuild for most of the files in
the project. Time could be saved by using ccache (since most of the
things didn't change) but we can do better, i.e. re-organize the headers
so we don't have to re-build everything.

With this patch only AP_InertialSensor/AP_InertialSensor.h is exposed to
most users. There are some corner cases to integrate with some example
code, but most of the places now depend only on this header and this
header doesn't depend on the specific backends.

Now changing a single header, e.g. AP_InertialSensor_L3G4200D.h triggers
a rebuild only of these files:

	$ waf copter
	'copter' finished successfully (0.000s)
	Waf: Entering directory `/home/lucas/p/dronecode/ardupilot/build/minlure'
	[ 80/370] Compiling libraries/AP_InertialSensor/AP_InertialSensor.cpp
	[ 84/370] Compiling libraries/AP_InertialSensor/AP_InertialSensor_L3G4200D.cpp
	[310/370] Linking build/minlure/ArduCopter/libArduCopter_libs.a
	[370/370] Linking build/minlure/bin/arducopter
	Waf: Leaving directory `/home/lucas/p/dronecode/ardupilot/build/minlure'
 2016-02-01 14:18:51 -02:00
Jonathan Challinger
4c2e6af6ee AP_InertialSensor: statically register with AP_AccelCal 2016-01-23 10:35:34 +09:00
Randy Mackay
081beacb8d AP_InertialSensor: replace sqrt with safe_sqrt to resolve compiler warning 
Also add suppressing comment for missing break at end of switch
 2016-01-23 10:10:17 +09:00
Andrew Tridgell
ee453783eb AP_InertialSensor: added get_delta_angle_dt() API 2016-01-19 09:50:21 +11:00
Andrew Tridgell
b2745bb545 AP_InertialSensor: we only need peak hold for negative X for now 2016-01-02 09:58:32 +11:00
Tom Pittenger
3aaf2b1d2b AP_InertialSensor: add pos/neg peak detector 
new functions that get a filtered min/max accel peaks on each axis with fixed 500ms timeout:
    Vector3f get_accel_peak_hold_pos()
    Vector3f get_accel_peak_hold_neg()

This allows slower mechanisms, such as is_flying, to detect accel spikes which would indicate ground or object impacts. Vibe is too filtered. Independent positive and negative peaks are available
 2016-01-02 09:58:31 +11:00
Jonathan Challinger
0a3c2774e9 AP_InertialSensor: fixes in response to review 2015-12-29 22:55:04 -08:00
Jonathan Challinger
137ace473d AP_InertialSensor: add accel_cal_requires_reboot 2015-12-29 10:46:35 -08:00
Jonathan Challinger
f6a41a8936 AP_InertialSensor: ensure that accel calibration object isn't allocated more than once 2015-12-29 10:46:35 -08:00
Jonathan Challinger
492223cb84 AP_InertialSensor: support AP_AccelCal 2015-12-29 10:46:34 -08:00
Andrew Tridgell
17fc58f3cd AP_InertialSensor: re-work for more flexible main loop rates 2015-12-27 14:57:12 +09:00
Andrew Tridgell
93ef881109 AP_InertialSensor: added get_loop_delta_t() API 2015-12-27 14:57:10 +09:00