aepko/Ardupilot2
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
38,064 Commits 72 Branches 509 Tags 683 MiB
a025794bae
Commit Graph

38064 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Peter Barker
a025794bae GCS_MAVLink: correct is_streaming check and update of is-streaming mask 2019-06-11 09:26:10 +10:00
Peter Barker
0aa074467b waf: add -Werror=overflow 
Can catch some trivial errors.  This warns by default on gcc anyway
 2019-06-11 09:12:49 +10:00
Andrew Tridgell
08baabed4a Plane: modify FENCE_AUTOENABLE docs 2019-06-11 06:58:47 +10:00
Andrew Tridgell
5076058459 Plane: added FENCE_AUTOENABLE=3 option 
this enables the fence when arming. If the vehicle is outside the
fence or it can't be enabled then arming fails
 2019-06-11 06:58:47 +10:00
Andrew Tridgell
51e187342b HAL_ChibiOS: move the power control changes to be only CubeBlack 
This aims to fix #11455. I have been unable to reproduce the issue,
which leaves me thinking it is either a bootloader difference or a hw
difference between pixhawk1 clones and real pixhawk1 boards
 2019-06-09 16:56:14 +10:00
Andrew Tridgell
df4fc0fff0 AP_NavEKF2: default EK2_MAG_EF_LIM to 50 
this was supposed to be part of the original PR (agreed with Paul to
enable by default)
 2019-06-08 20:24:58 +10:00
Andrew Tridgell
abb624b94b Tools: rebuilt IO fw 2019-06-08 14:31:01 +10:00
Siddharth Purohit
0eddfa9ad4 IO_Firmware: update iomcu to autodetect heater control pin active level 2019-06-08 14:31:01 +10:00
Siddharth Purohit
a926effee5 hwdef: iomcu set pin mode to input for autodetecting heater control level 2019-06-08 14:31:01 +10:00
Siddharth Purohit
f23746053d AP_IOMCU_FW: autodetect active high/low on heater control pin 2019-06-08 14:31:01 +10:00
Peter Hall
aa32a0d143 AP_Windvane: fix NMEA vehicle to earth frame 2019-06-08 09:48:03 +09:00
Randy Mackay
607f996232 AC_Avoid: restructure logic of adjust_velocity_circle_fence 2019-06-08 09:35:36 +09:00
Randy Mackay
a96c146758 AR_AttitudeControl: set-throttle-out-stop considered same as running speed controller 
update the speed-last-ms time when set-throttle-out-stop runs or else the desired throttle will not be acceleration limited when the desired speed is next increased above zero
 2019-06-08 09:35:36 +09:00
Randy Mackay
e846840a52 AC_Avoid: fix stopping at circular fence 2019-06-08 09:35:36 +09:00
Andrew Tridgell
6a558bff2b Tools: removed PYTHONPATH setting 
this was breaking mavproxy
 2019-06-08 07:14:59 +10:00
Peter Barker
82f76a9367 Tools: initvagrant.sh: force-link .mavinit.scr for idempotency 2019-06-08 00:52:44 +10:00
Peter Barker
f730020b31 Tools: waf: make extra arguments in format string fatal 2019-06-07 22:03:41 +10:00
Peter Barker
5f018d0798 Tools: scripts: add dumpstack 
Given a pid this script attempts to dump a stack trace of that process
to stderr
 2019-06-07 22:03:41 +10:00
Peter Barker
e061df0f6d AP_HAL_SITL: attempt to dump stack trace as part of segv handler 2019-06-07 22:03:41 +10:00
Andrew Tridgell
d66d1a31f0 Tools: set SITL_PANIC_EXIT for build_autotest.sh 2019-06-07 20:33:13 +10:00
Andrew Tridgell
02403d9b93 HAL_SITL: added support for exit on panic() 
used by autotest server
 2019-06-07 20:33:13 +10:00
Peter Barker
35d4555be0 AC_Avoid: improve documentation of AVOID_ENABLE options 2019-06-07 17:37:00 +09:00
Peter Barker
d8278335a1 Tools: autotest: move upload_using_mission_protocol up to common.py 2019-06-07 16:29:37 +10:00
Peter Barker
c8a4af76fe Tools: autotest: add tests for Plane fence 2019-06-07 16:29:37 +10:00
Peter Barker
10120cee54 Tools: autotest: disable horizontal fence avoidance test showing bugs 2019-06-07 15:26:39 +10:00
Peter Barker
6e13adb43c Tools: autotest: add test for fence Avoidance 2019-06-07 15:26:39 +10:00
Andrew Tridgell
78f3265f27 Tools: fixed typo 2019-06-07 07:43:44 +10:00
Lucas De Marchi
e66de36016 HAL_ChibiOS: fix I2C transaction without stop condition 
Start using i2cSoftStop() instead of i2cStop() so the peripheral
continues to be enabled and with non-gated clock.  This allows time for
the I2C peripheral to continue the ack or stop.
 2019-06-06 09:27:47 -07:00
Lucas De Marchi
e51f0bc7ff ChibiOS: update submodule 
Bring the i2cSoftStop() function.
 2019-06-06 09:27:47 -07:00
Andy Piper
31ea3466af AP_InertialSensor: Post-filter logging takes precedence over sensor-rate logging. 2019-06-06 17:09:17 +10:00
Andy Piper
52e4676564 Filter: Allow all filter frequencies to be 16bit. 2019-06-06 17:09:17 +10:00
Andy Piper
36878e9b3c AP_InertialSensor: Allow all filter frequencies to be 16bit. 2019-06-06 17:09:17 +10:00
Andy Piper
fff81a2163 AP_InertialSensor: Make sure the LPF output is used by the notch input. 2019-06-06 17:09:17 +10:00
Andy Piper
1a8475cf9f Filter: Decouple notch filter configuration from the filter itself. 
Allow multiple notch filters to be instantiated using the same configuration.
 2019-06-06 17:09:17 +10:00
Andy Piper
18d403c3ac AP_InertialSensor: Rework notch filter allocation and sampling 
https://github.com/ArduPilot/ardupilot/issues/11346

Allocate a notch filter per-IMU.
Update the notch filters in the backend at the sensor sample rate.
Allow raw logging of post-filtered gyro and accel values.
 2019-06-06 17:09:17 +10:00
Andrew Tridgell
045bdf3478 AP_InternalError: removed unused internal error 2019-06-06 16:35:22 +10:00
Andrew Tridgell
91f80613dd AP_Logger: removed internal error for logging without sem 2019-06-06 16:35:22 +10:00
Peter Barker
dce472745e AP_NavEKF3: take EAS2TAS from AHRS rather than airspeed 2019-06-06 12:44:36 +10:00
Peter Barker
11f31c2851 AP_NavEKF2: take EAS2TAS from AHRS rather than airspeed 2019-06-06 12:44:36 +10:00
Peter Barker
697b8f6b53 AP_AHRS: take EAS2TAS directly from Baro (rather than via airspeed) 2019-06-06 12:44:36 +10:00
Peter Barker
fb2422e496 Plane: stop setting eas2tas in AirSpeed - it can work it out itself 2019-06-06 12:44:36 +10:00
Peter Barker
5cfba85095 AP_AirSpeed: take EAS2TAS directory from baro; use for all backends 
Plane was only setting EAS2TAS in the primary frontend; calibration
expected it to be set on each instance.
 2019-06-06 12:44:36 +10:00
Peter Barker
470e88f8b3 AP_Button: use send_to_active_channels() 2019-06-06 12:41:48 +10:00
Peter Barker
264a757095 GCS_MAVLink: add send_to_active_channels method 2019-06-06 12:41:48 +10:00
Peter Barker
4d46c801f2 GCS_MAVLink: panic in SITL if we fail to write to uart 2019-06-06 12:41:48 +10:00
Andrew Tridgell
73bc277470 HAL_ChibiOS: fixed KakuteF7 build 
low on flash
 2019-06-06 12:19:13 +10:00
Andrew Tridgell
2acaada884 HAL_ChibiOS: fixed OMNIBUSF7V2 build 
ran out of flash for plane
 2019-06-06 12:19:13 +10:00
Andrew Tridgell
01a0d3897e Copter: fixed HAL_MINIMIZE_FEATURES build 2019-06-06 12:19:13 +10:00
Andrew Tridgell
bfdf857b34 HAL_ChibiOS: fixed airbotf4 build 2019-06-06 12:19:13 +10:00
Andrew Tridgell
63bec946d3 uavcan: submodule update 2019-06-06 12:19:13 +10:00